Connect the sbRIO amulet monitor

Similar Questions

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?

• Connect the second VGA monitor to Pavilion HPE

  Hello

  I have a Pavilion HPE h8-1114 PC, that has a DVI and HDMI monitor port. I have a VGA monitor connected to the DVI port with an adapter. I have a second VGA monitor, I want to connect, but I understand that it cannot be connected to the HDMI port. Are there other options besides buying a HDMI monitor? Can I use one of the covered ports which I think is VGA? (I guess not.) Can I add a second graphics card with a VGA port and use both screens? (I saw on another post that adding another graphics card could disable the existing card). Can I opt for a card that supports two VGA or DVI ports?

  Thank you!

  In addition what erico said, there are other options. You can use a video-to-USB adapter of EVGA UV plus + 19 or you can add a x 1 PCIe graphics card. If with a PCIe x 1, using a card Nvidia... results will be the best in this way.

  Frank

• Display connection to sbrio 9607 amulet

  Hello

  I would like to connect the Sbrio 9607 amulet monitor (part no783305-01). Previous related discussions in the forum, I understand that display must be connected to the sbrio using RS232. I want to assure you that it is not possible to use the USB port on the screen of the amulet for connection. USB connection is more convenient and simpler since RS232 requires the additional connector and wiring. However, I'd go for the RS232 if USB is not an option.

  Thanks in advance

  Gear

  It looks like quite similar questions were asked before (different sbRIO) and they found that they were unable to communicate to their display through USB.

  https://forums.NI.com/T5/instrument-control-GPIB-serial/connect-amulet-display-to-sbRIO/m-p/3195434#...

• How to connect the external monitor to Satellite T130-C17?

  It has a HDMI port on my laptop and I would use it to connect to a monitor...
  The monitor supports DVI and VGA...
  So I thought that buying a VGA-HDMI would do the trick...

  Unfortunately, when I plug it almost doesn t do something...
  I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
  The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.

  For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.

  This third monitor is a little strange to me.
  You want to connect two external screens/monitors to your laptop satellite?

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• The display on my 2008 Macbook Pro went dark. Can I connect to a Mac monitor no?

  View on 2008 MacBook Pro has been dark. I can connect the computer to a Mac monitor no?

  Sure. If the computer problem, it is with the LCD screen or the backlight, you should be able to use it plugged in the external display. If the problem is with the graphics card will not help the external display. Your computer requires a dongle to connect to the screen and you must get the correct key for display - VGA or DVI. Determine what type of port the display and buy the appropriate mini-Display dongle

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• Yoga 900 - do not wake up to the top of the mode standby mode when it is connected to an external monitor

  Hello world. It's just a message of public service regarding an issue I encountered. I found that my 900 Yoga do not "wake up" after he went to sleep when you are connected to an external monitor.

  I am connected to a HP 27VX monitor by a C of Type USB to HDMI adapter. I found that my Yoga wakes up without problem if the screen is off (power options disable the display settings), but he does not wake up if she gets to sleep when it is connected to the monitor. The question however is not that he don't wake up, the problem is that for some reason when it is connected to the monitor there's going to ever really sleep (slow flashing white light). I think it is the way of somehow when you try to go to sleep. When he enters this mode, the power led is white, and the only solution is power Yoga of the cycle. I don't know why he won't successfully to sleep when it is connected to a monitor, but my guess is a certain type of driver/hardware between the USB type C HDMI adapter and the monitor problem.

  I checked that everything works as designed when I am not connected to the monitor. My solution is to go to power options and turn on my sleep option (when it's plugged in) to "never". Not a solution by any means, just a work around so that all stakeholders (Lenovo, HP) understand how to work with the new port USB Type C. I hope this helps.

  Rob

  Lenovo support makes installation. I don't remember whether or not she has uninstalled the driver first. Sorry:)

• Connect the external monitor to my Sony VAIO laptop Win XP

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Connect the external monitor to my Sony VAIO laptop Win XP

  thanking you in advance

  Is there a question here?

  Read your manuals and find a way to use your laptop computer based on the instructions from Sony to connect external (including projectors) monitors for the laptop.  Usually a connection (as you said Windows XP where you have published, probably VGA) for the monitor and a few buttons to tell the laptop to mirror or extend the display to the second monitor.

• Need help to connect the monitor to Dell Inspiron Dell

  I recently bought a laptop computer Inspiron 17R in order to reduce the use of my laptop Precision M6600. A Dell U2312HM monitor has been used precisely as a second monitor and I want to use with the Inspiron system newly acquired as a second monitor. The different video ports on both of these computers and I failed to get the monitor to work with the Inspiron. While the accuracy using an older VGA connection, the new Inspiron using a HDMI connection. To further complicate the issue, the monitor has several ports to connect to a source of video output, which includes the DisplayPort, DVI, VGA and ports for USB connections upstream and downstream, but not including HDMI. I used a DisplayPort to HDMI Cable adapter trying to to connect the Inspiron to the monitor, but could not produce an image on the screen of the monitor. This continuous monitor to answer correctly when it is attached to the precision via the VGA cable & port so I'm confused as to why I had no luck by attaching the monitor to the new system with the adapter DisplayPort to HDMI. How can the Inspiron 17R be connected to the monitor Dell U2312HM?

  Computer output HDMI cannot convert a monitor of DP (DisplayPort) using a straight through cable.
  What you have purchased is designed to do the opposite.
  Computer RFP out for monitor HDMI in

  Regardless of the port, you will get only ever 1920 x 1080 on the U2313HM. Return this cable. Buy a DVI HDMI to =.
  Computer output HDMI--> HDMI DVI--> DVI U2313HM Cable in

• Connect the TV (with sound) and monitor for Optiplex 390

  Here is my system info:

  OptiPlex 390 small footprint

  Windows 7 64 bit

  Intel Chipset H61

  Intel HD 2000 (with HDMI and VGA) graphics card

  Map of AMD Radeon 6350 512 MB video (with 2 DVI splitter)

  I need to connect 1) HD TV with the sound via HDMI and 2) monitor via VGA to this system (no sound).  I did a lot of research on the Internet but can't find a definitive answer if my system will support both views.  Can anyone confirm if one of the three options below does not work, or any other ideas?

  Option 1: remove AMD card, connect the HDMI TV, connect the VGA monitor.  I've seen conflicting information if the HDMI and VGA ports can be connected at the same time.

  Option 2: Connect TV: dispatcher--> DVI HDMI adapter DVI-->--> TV, monitor connect a HDMI cable: dispatcher DVI DVI VGA adapter--> monitor-->.  It should work, but if someone can confirm if the AMD Radeon 6350 supports audio through DVI to TV?

  3rd possibility: buy another video with HDMI and VGA card.  I'd rather not spend more money... I have six systems to connect!

  Thank you in advance for your help!

  Hi Ozone72,

  Intel HD Graphics 2000 which was shipped with OptiPlex 390 supports two independent screens. Which means that you can connect TV for VGA and HDMI monitor, so that AMD card must be removed from the computer.

  Please try it and return back if it worked.

• Connect the monitor to the laptop with displayport/DVI

  Help, I have a laptop Dell 1749 Studio. The machine is less than a year. There an i5-520 with 8 GB and Intel HD graphics. I connect to a monitor ACER X233H. I used the VGA connector on the laptop but wanted a more secure connection. I bought a Displayport DVI cable, but the monitor says "No Signal" I googled around but not found help with Win7 system.

  The photos are interesting. According to the photos, the cable connector is a DL-DVI-D, and the monitor is a DVI - D. I wonder if that causes problems?

  I have an old Samsung 203 b monitor. The monitor has the same connector DVI - D, like the ACER. I downloaded the driver on the Samsung site, on the laptop. When everything is connected, the laptop does not detect the Samsung. The message reads 'another display not detected. This is an another can of worms that I won't do side followed with.

  Time to try another cable, I think, with a regular DVI - D connector.