One can explain the value command Anyconnect VPN etc. "vpn-filter"?
Hello
In Anyconnect VPN, there are two commands that I pointed out wild "BOLD". I checked it with "?" behind the command. But I still don't understand it and why it should be used here. I hope someone can explain it to me. Thank you
Internal authority of group-policy
attributes of authority-group policy
VPN-filter Access_List value
clientless ssl VPN tunnel-Protocol
value of group-lock Third_Party
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list County_Access
-Here is what I checked:
Enter the name of an existing tunnel group for users to connect with group-lock
Enter the name of an ACL configured to apply to VPN-filter users
Vpn-filter adds an extra layer of security for VPN remote access by adding an access list to all traffic that comes from remote users.
For example, you can restrict to a subnet (which you can do in the tunnel-group) can still say that the HTTP servers, B and C (for which you would use the access list specified by the filter-vpn).
The group-lock prevents users defined to choose policies other group available in the drop-down list.
For example, you can restrict VPN users generally use a group without restriction for IT admins. Or allow only external suppliers to connect to a group designated to them that restricts access to a set of resources in the DMZ.
Tags: Cisco Security
Similar Questions
-
How im can extract the value of the persistence of virtual machine disk?
Dear friends
How im can extract the value of the value of the persistence of disks of virtual machines?
IM using the bellows of the order, I have a if to check if the disks are independent or not
but im only want values of the persistence of the column to use in my script
Get-disk hard - vm machine01
CapacityGB persistence Filename
---------- ----------- --------
10 000 persistent [LUN2] RJ7469SR039/RJ7469SR039.vmdk
8 000 persistent [rate2] RJ7469SR039/RJ7469SR039_1.vmdk
Thank you
Almir
In your example, you just use Select-Object
Get-disk hard - vm machine01 | Select the Parent, persistence
The parent is the name of the virtual machine
-
Please, I beg you, with the help of Javascript change the values of specific spot color? for example, I have the color called VARNISH with c values: 0, m:10, y: 15 k: 0 and it would help me to change to c: 0, m:0, y: 0, k: 0, in an action. Is this possible? Thank you
Hello Kon Verter,
You can change the values in your sample of spot, but you need to check a lot of things before.
for example, you can do something like this:
var Vcolor = app.activeDocument.swatches.getByName("Varnish"); if (Vcolor.color.spot.colorType == ColorModel.SPOT && Vcolor.color.spot.spotKind == SpotColorKind.SPOTCMYK) { alert("Black value before: "+Vcolor.color.spot.color.black); Vcolor.color.spot.color.black= 0; // and so on alert("Black value after: "+Vcolor.color.spot.color.black); }
This will change the black value of the task of CMYK color with name Nail Polish 0
Have fun
-
The success, but AnyConnect VPN cannot remote desktop
Hi all
I have a problem when I am unable to remote desktop in any PC LAN when I am connected via VPN. I can ping all the nodes inside the network and I can open a web page from my local PC address inside, as well. So it seems like it was only the RDP (3389) is affected. Remote access for PCs are turned on, as I am able to get to them via a different method (SBS Remote Web Access).
I'm a bit new to ASAs, so any help is greatly appreciated. TIA
ASA 5505
ASA Version 8.2 (5)
!
host name asa
activate the encrypted password of IqUJj3NwPkd23LO9
2KFQnbNIdI.2KYOU encrypted passwd
names of
name 10.0.1.0 Net-10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
192.168.1.98 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
11.11.11.11 IP address 255.255.255.0
!
interface Vlan3
No nameif
security-level 50
192.168.5.1 IP address 255.255.255.0
!
passive FTP mode
object-group service RDP - tcp
EQ port 3389 object
TSTGRP_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound list extended access permits all ip Net-10 255.255.255.224
inside_nat0_outbound list of allowed ip extended access all 12.0.1.0 255.255.255.224
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 12.0.1.0 255.255.255.224
inside_access_in of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask IP local pool SSLClientPool-10 10.0.1.1 - 10.0.1.20 255.255.255.128
12.0.1.1 mask - 12.0.1.20 local pool IPSec-12 IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 11.11.11.11 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = not - asa .null
pasvpnkey key pair
Configure CRL
string encryption ca ASDM_TrustPoint0 certificates
certificate fecf8751
308202da 308201c 2 a0030201 020204fe cf875130 0d06092a 864886f7 0d 010105
31153013 06035504 03130c 70 61732d 61 73612e6e 756c6c31 16301406 0500302f
092a 8648 86f70d01 09021607 7061732d 61736130 33303530 36323134 1e170d31
3131365a 170d 3233 30353034 32313431 31365a 30 2f311530 13060355 0403130c
7061732d 6173612e 6e756c6c 01090216 07706173 4886f70d a 31163014 06092, 86
2D 617361 30820122 300 d 0609 2a 864886 f70d0101 01050003 82010f00 3082010 has
00dc6f5c 02820101 584be603 1219ad4a 43085 has 97 b8fd7e33 c887933d 1b46dbca
deada1da 7689ab5e 9b6fa20b d6f7e5e3 049285e7 65778c 15 a9447e1e 8ba749cb
61e0e985 9a90c09f b4c28af0 c6b5263c d2c13107 cce6c207 62f17cbe 99d9d5c2
25c035e4 86870084 ea9ab8ae 8b 664464 40305c4d e40dd774 506f6c0a 6f4ca4d1
0c81d2dd bcdc8393 3f4fbcba 1b477d45 af862bdf 50499615 7b9dac1b 502063b 8
67252db8 1473feec c39d9c32 9d9f3564 74fdf1bd e5ad6cba 999ae711 ca 71, 9310
c381347c a6508759 eb405cc0 a4adbe94 fb8204a2 382fad46 bc0fc43d 35df1b83
6379a 040 90469661 and 63868410 e16bf23b 05b724a3 edbd13e1 caa49238 ee6d1024
a32a1003 af020301 0001300d 4886f70d 01010505 00038201 010084b 1 a 06092, 86
c96aeec0 62698729 4e65cace e6f2e325 62909905 df31fbeb 8d767c74 395b 9053
434c5fde 6b76779f 278270e0 10905abc a8f1e78e f2ad2cd9 6980f0be 56acfe53
f1d715b9 89da338b f5ac9726 2de50629 34520055 55d1fcc5 f59c1271 ad14cd7e
14adc454 f9072744 bf66ffb5 20 c 04069 375b858c 723999f8 5cc2ae38 4bb4013a
2bdf51b3 1a36b7e6 2ffa3bb7 025527e1 e12cb2b2 f4fc624a 143ff416 d31135ff
6c57d226 7d5330c4 c2fa6d3f a1472abc a6bd4d4c be7380b8 6214caa5 78d53ef0
f08b2946 be8e04d7 9d15ef96 2e511fc5 804c402b 33987858 46a7b473 a 429, 1936
681a0caa b189d4f8 6cfe6332 8fc428df f07a21f8 acdb8594 0f57ffd4 376d
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.100 255.255.255.255 inside
SSH 10.0.1.1 255.255.255.255 outside
SSH timeout 5
Console timeout 0
dhcpd auto_config inside
!
dhcpd address 192.168.1.222 - 192.168.1.223 inside
dhcpd dns 11.11.11.12 11.11.12.12 interface inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 11.11.11.12 DNS server 11.11.12.12
Protocol-tunnel-VPN IPSec webvpn
username, password test 1w1. Encrypted F5oqiDOWdcll privilege 0
username test attributes
VPN-group-policy SSLClientPolicy
test1 lQ8frBN8p.5fQvth encrypted privilege 15 password username
username, password test2 w4USQXpU8Wj/RFt8 encrypted privilege 0
name of user test2 attributes
VPN-group-policy SSLClientPolicy
username password test3 SC8q/LweL74qU0Zu encrypted privilege 0
test3 username attributes
VPN-group-policy SSLClientPolicy
attributes global-tunnel-group DefaultRAGroup
address pool IPSec-12
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
NO-SSL-VPN Tunnel-group type remote access
General-attributes of the NO-SSL-VPN Tunnel-group
address-pool SSLClientPool-10
Group Policy - by default-SSLClientPolicy
NO-SSL-VPN Tunnel - webvpn-attributes group
enable PAS_VPN group-alias
allow group-url https://11.11.11.11/PAS_VPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:7f67d8c8b24bc533cf546b545aa33327Looks like traffic is underway for RDP but there is no response packet
7: 22:24:58.824954 802. 1 q vlan P0 10.0.1.1.49162 #1 > 192.168.1.20.3389: S 3361152799:3361152799 (0) win 65535
8: 22:24:59.824740 802. 1 q vlan P0 10.0.1.1.49162 #1 > 192.168.1.20.3389: S 3361152799:3361152799 (0) win 65535
This can result from Neatgear (192.168.1.1), drop the packets. You can have solutions on SAA by tapping the traffic on the inside of the interface on the ASA. Here's what you need to do:
vpn_nat_inside 10.0.1.0 ip access list allow 255.255.255.0 192.168.1.0 255.255.255.0
NAT (10 vpn_nat_inside list of outdoor outdoor access)
Global interface (10 Interior)
This pat only vpn traffic entering the pool and will not have effect on anything else.
Kind regards
Bad Boy
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
explain the values for IO tablespace statspack &; file
10.2.0.2 aix 5.2 64 bit
in the section Tablespace IO Stats & Stats of e/s of statspack and awr reports file can someone help to clear up some confusion that I have with the value of AV readings/s-AV Rd (ms). I'll be referring to certain values, I have one of my reports, more than an hour 1 snap shot period, with the first three columns being readings, av rd/s, av rd (ms) respectively for the two sections.
I have the following for the Tablespace IO.
PRODGLDTAI
466 879 130 3.9 1.0 8 443 2 0 0.0
For the e/s file, I have the following for each file in the tablespace.
PRODGLDTAI /jdb10/oradata/jde/b7333/prodgldtai04.dbf
32 113 530 2.6 1.0 0 1 302 0 0.0
PRODGLDTAI /jdb14/oradata/jde/b7333/prodgldtai03.dbf
30 107 878 1.6 1.0 1 898 1 0 0.0
PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai01.dbf
32 114 234 5.8 1.0 2 834 1 0 0.0
PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai02.dbf
36 131 237 5.2 1.0 1 2 409 0 0.0
From there I can calculate that there are on average 129.68 reads every second for the tablespace, and which corresponds to what is stated. But whence the rd (ms) av? If there are 1000 milliseconds in a second and there were 130 reads per second, which does not 7.6 ms by read?
AV Dr (ms), what exactly? That's how many milliseconds it takes on average to 1 lira? I read in the doc Oracle Performance Tuning should not be greater than 20. What exactly is this statistic? In addition, we are currently looking at the purchase of a SAN and we were told that the value should not be greater than 10, which is just a matter of opinion? These values would be little useless on the tablespaces and data files that are not very active over a period of hours of time?
Published by: PktAces on September 22, 2008 08:31I replied to this post a few days ago and so I have a watch on the post - but my response seems to have disappeared.
Yes - "av rd (ms)" is the average time for a reading to be completed. Roughly speaking, it is "total time waiting for the read request" / "total number of read requests.
20 m/s may be based on the programming of schedules for older hardware (disks 10 000 rpm). If a manufacturer tells you that the average response time for an e/s (for example) is 6 m/s - which equals 160 e / s per second - so it is reasonable to assume that in a multi-user system with a reasonable degree of simultaneity that perceived for a user response time will be about double. (Read Cary Millsap on the theory of queues and Oracle to understand why).
So the 10 m/s is probably work around this figure of 6 m/s 2 x and enabling caching of the effects a bit. As a very rough indicator of 'it is unhealthy, if the average is more than 10', it's probably a good figure. But you can't be sure that the SAN is healthy if the figure is less than 10.
It is difficult – without knocking a SAN with tablescans and it will madly in readahead and will produce data very quickly to a single user, while sanctioning other users who make random IO. In contrast, that a cache of SAN can do a lot of work to protect an Oracle of real disk readings because an object is just enough used to stay in the cache of SAN when it can't stay in the Oracle cache. If medium-sized SAN can be very misleading.
When you enter the land of SAN, you must keep an eye on v$ event_histogram, v$ file_historam, v$ temp_histogram for a time gap of I/O as a better indicator of health.
In fact, your last comment about "rarely used" objects is a useful indicator. If something is rarely used, Oracle "physical block read" is probably is a real disc read - an indicator of data how fast can detach from the SAN.
Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
http://www.jlcomp.demon.co.UK"The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." Stephen Hawking.
-
I can reverse the value stored in Step.Result.PassFail (no)?
I'd like my test of success/failure at the NECK so my VI to false.
to do this, I need to reverse the value before saving it for Step.Result.PassFail
I tried the following when you save the output of the VI to Step.Result.PassFail, but it does not work
! Step.Result.PassFail
Not (Step.Result.PassFail)
Any advice?
You can reverse not only before you leave the code module or you could reverse in the expression of the position.
-
Out of several users on my computer only one can access the internet
Original title: Internet connection
There are several users on my computer, but only one of them can access the internet, pls help. THX Fred
Hi Fred,.
1. is it wired or wireless?
2. what exactly happens when you try to connect to the internet? You receive an error message?
3 did you do changes on the computer before the show?
I suggest to follow the article and check if you can connect to the internet:
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
You can also see the following article for more information on network problems:
Windows wireless and wired network connection problems
Reply with more information about the issue so that we can help you better.
-
I'm having a nightmare trying to program in a few Motion keyframes to change the position of an element in my program monitor.
I created the image key to assign the value of the position of an element in the timeline - I want the clip to move toward the Center on the side of the screen. I followed the guidelines and can see the keyframe symbols appear in the view of key images marking the beginning and the end of the change. What is strange, is that when I press play, I can see values changing in the effect controls panel - but nothing really happens in the clip! The clip in question has a silhouette figure, that I created using images of the figure against a green screen, which has then been hidden. I then applied a track matte key to the below item to fill the silhouette with footage - this has something to do with my animation does not?
I checked to assure that I do apply keyframes for the clip, checked parameters interpolation of keyframes of & all seems in order. I'm new to first, & I apologize if I've properly referenced the different tools or windows - but I hope you get the idea. I looked online but can't find someone reporting a similar issue, that is certainly a first when you are working with such a popular program. I hope that it is something stupid and can be easily solved.
Can someone tell me why the keyframes, I could, & can change the clip plays, are not actually affecting the clip at all? Any help would be greatly appreciated.
I realized after the announcement that if I applied the keyframe to the matte rather than the silhouette clip keyframes of the movement worked. Thanks for the advice so guys!
-
Is there a way I can store the value of ' render: stream "in a local variable
As we know, rendering: stream will always flow the result to the browser. I have a requirement where I need to process the output of make the flow on the side Server and print it. So I tried using ics. ReadPage and called a siteentry/csElement, whose code < variable render: flow = "myvalriable" / >. But still, I get the result not transformed in the ics. ReadPage, call the SiteEntry. Appreciate your help in this regard.Very well. You might want to consider the 'code' and 'escape' on render attributes: stream - they can automatically do good javascript escape for you.
readUrl works but consumes one thread of the app server, so use it with caution.
-
I have Windows Vista.
Just above the text box that allows you to enter the text of the message on the "new message New Mail page" there is usually a bar of buttons with buttons to add text formatting like bold and italic.
This toolbar can also have a button to activate a clickable hyperlink text link (look for a string like button).
You can select the text and click on this button to activate the link into a clickable hyperlink.
If you can not find the button, and then move all the to check the ToolTip of each (for example to insert a hyperlink). -
You can use the value of a digital indicator in a digital control?
Hello!
I have to develop a code where I need to find the maximum value of a waveform and draw a line at 50% of the value. So I chose find the amplitude of say 10 cycles of waveforms and found the maximum value of the amplitude.
But my real problem is, I have to use the maximum amplitude value I get from the table VI maximum and back into a program to calculate the value of 50%.
So it is possible to use the value of a digital indicator and put it in a digital control? As in MATLAB or C, you give a name to the variable and use it later to do all the calculations. Is it possible to do something similar in LabVIEW?
-
When I run Thunderbird, the same as that of my four accounts/E-mail addresses is always at the top of the list. However, over the years, I added three other e-mail addresses, and I would like the newest one is the default address at the top of the list. How can I change the order of the list so that my recenty added most e-mail address becomes the top of the list the default?
Install this add-on.
https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/ -
C7280 all-in-One responds to the print command.
My HP Photosmart C7280 all-in-one has stopped responding to print commands on my home wireless network with a Macbook Pro. The C7280 will scan and copy just fine. A print order blocking Microsoft for Mac software or gets an error message on the Print Manager. Following the instructions of HP I have reset the printer system and repair the disk (no fixed necessary); Then I need to uninstall and reinstall. How do I do that? (The C7280 was purchased in 2008). Other suggestions? Thank you!
This widget could not be displayed. -
How I can send the value of the variable of a film to other films
Hello
I have
hand. DCR
movA.dcr
movB.dcr
How can I send for review a = 500 to movA and movB and use
I put this code in frame 1 of the main.dcr
global one
on enterFrame me
a = 201
end
and put the cod in frame 1 of the movA.dcr
on enterFrame me
If a = 200 then
switch to other
on the other
Halt
end if
end
but these cod do not work!
I think it must go stop and get out of movA.dcr but he continiue working.
I want movA and movB catch one of main.dcr and so a = x (x evry we want) then movA and movB work of another release of film director.
Post edited by: 200 x 200
Hi 200 X 200,
Unlike other language coding, Lingo requires global variables to be declared anywhere where they are used.
Declare global one in the framework of movA.dcr and movB.dcr framework and that should work. I hope.
Good luck
Jack
-
One can see the cookies of session in private browsing mode - see only normal cookies.
Using Firefox 19.0.2
Is it possible to allow Firefox to display ONLY the cookies of the current session in private browsing mode, rather than a list of my regular cookies?
First, basic cookies management seem to work fine for me, in both normal mode and private browsing: Cookies set during private browsing are removed as expected when you exit Firefox or switch to normal navigation.
HOWEVER...
I can't SEE the new cookies set during a private browsing session.
If I start Firefox normally, switch to private browsing mode and then go to Options > show Cookies, the window opens showing a long list of my 'normal' cookies
Previously, the cookies window seems to be EMPTY at the start of a private browsing session. After a while of browsing and then recheck the list I see only the cookies set in this private browsing session.
Now, during a private session, when I re - check the list of cookies for navigation I see my regular cookies, and NONE of the new session cookies appear in this list (the same cookies appear as before switching to the private mode).
I tried to start Firefox in Mode safe, without a change in behavior. I also tried to disable the modules, without change.
List of installed modules:
Adblock Plus 2.2.3
BetterPrivacy 1.6.8
Ghostery 2.9.3
Googlebar Lite 4.9.7
IE View 1.5.6
MICROSOFT.NET Framework Assistant 1.3.1
PrivacyChoice TrackerBlock 2.2
Status-4-Evar 2013.02.16.23
Bookmark Favicon changer 1.74 (disabled)
CheckPlaces 2.6.2 (disabled)Suggestions?
Thank you!
- bug 823941 - can't see the cookies stored in a private with using the cookie Viewer window
(please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)
Maybe you are looking for
-
I have two problems with the synchronization again. The first problem is that none of my bookmarks or tabs of my office are appearing on my Android phone or work phone reverse on the desktop.The second problem is I'm trying to synchronize my favorite
-
(If she's not here can someone please point me to the right forum? Because a question on a Windows update (8.1) didn't belong in the forum update of Windows 8. (Thank you.) With Windows 8.1 will I have the option to keep the air clean of 8.0 and doe
-
Tried to update Windows Live Essentials received error Oxc8000222 tried disk clean and other options, but not joy. Can anyone help please. Regards John. Do I need this update? Family safety appears to be a problem.
-
Cannot restore the downloads folder to the original location
Dear community, I have a new computer Windows 8. The hard drive is split into two, OS (C :) and DATA (d) and I realized that all my files were stored in the C: drive) I read online that you can change the location of folders like "My documents" by cl
-
No Audio of SOUL [AE project/Mac]
Export my project in After effects by SOUL translates into a video without the sound. Audio is checked. Tried multiple configurations, third-party stock H.264 presets and nothing seems to work. I put multiplexing None to isolate the audio file that c