C7280 all-in-One responds to the print command.

Similar Questions

• C7280 all-in-One can't automatically print double-sided

  I recently updated my laptop, one with one with Windows 7 64 - bit Vista and the printer I have is the C7280 all-in-One.

  After installing the driver recommended on the site of HP (PS_AIO_02_Net_Full_Win_WW_130_140.exe) because of the CD supplied with the printer being impossible to install on Windows 7. After I try to print something (after setting the preferences on duplex), I received a message invites me to MANUALLY move the paper for duplex printing, which I wouldn't have to do as the printer as a two-sided printing accessory.

  The printer is capable of printing AUTOMATIC duplex on the Vista system, but is unable to do so now. In some other messages I saw that this could be remedied by following a few steps, and by changing some information in the properties of the printer, but my printer properties have many missing or grayed out areas. The following figures show this:

  

  

  Any help with this problem would be greatly appreciated, as I'd like to be able to automatically print double-sided instead of manually.

  The printer has been installed and used wireless for my laptop (both on Vista systems and 7).

  Press:

  Properties-> device settings->

  

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• HP 5740 all-in-one: computer recognizes the printer, but not to scan

  My computer HP Envy Phoenix 810-470pc will print and fax, but not to analyze my HP 5740, I can scan from the printer and send it to the computer, but cannot scan to the computer, I reinstalled the software and it hooked up via usb, but it still does not work. Windows 10.

  Welcome to the HP community @retiredrudy,

  I read about the problems you are having with the scanning from or to your Officejet on Windows 10 5740. See the link below and try all the steps in order and you should be able to scan in progress!

  Let me know if you encounter any questions!

  HP printers - "no Options of Scan" or "scan settings do not value" message (Windows 10)

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• HIP L7680 all-in-One renumbering of the printed pages 1-2-3-vs 3-2-1

  Pages are printed in the order of 3-2-1. How to print in the order of 1-2-3? I use Windows Outlook 2003 on XP, I'm trying to print address cards Contacts.

  Hello

  On the tab page paper layout, you should see something similar to this:

  

  Simply select from the front to the back.

  Kind regards.

• HP Officejet Pro 8600 all-in-One - footer of the printed Page is cut

  When I print from a Web page, the footer is cut off.   How can I get this back to the way it was?

  I got the impression during almost 6 mos.  The problem is everything that happens.

  The footer of break was the result of opt for printing "without borders". Change to 'print with border' in printing preferences that he fixed.

• C7280 all-in-one print not

  I installed a new modem and router and I cannot print my c7280 all-in-one computer

  The best way is to change the SSID and password to navigate in the menu on the printer control panel wireless.

  1. press the button on the HP all-in-one Setup.
  2. press on until the network is highlighted and press OK. The network Menu appears.
  3. press on until the wireless configuration wizard is highlighted and press OK. In a few moments, a list of detected
  the networks will appear on the screen. The network with the strongest signal appears first.

  4. here, you should see the name of the new network. Select and insert your new password wireless.

  This should help you operational. I would like to know if you have any questions.

  Thank you!

  Sean

• HP C7280 all in one. Problem copying

  HP C7280 all in one.  During the copy with the original on the glass, the copy is fine.  During the copy with the original introduced in the extra paper tray, a vertical line appears at the same place on each copy of the product.  Maybe some soil is at this location on the device that "reads" the original document because it passes?  Any suggestions on how to get and check this out?

  Hello

  I would tell you to follow the steps mentioned the link and check if this helps out you

  http://support.HP.com/us-en/document/c00899181

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• my printer hp photosmart c7280 all-in-one

  my printer hp photosmart c7280 all-in-one does not stop

  Hello! Welcome to the @Lukewp forums

  I read about how your printer will not turn off. My best advice would be to unplug it from the wall and let it sit unplugged for a minute or two.

  Try turning the power on to the top and see if this is useful, and if you can feed it to the wide by the power button.

  Let me know the results

• Problems with my laptop and my HP C7280 All in One Printer

  I have a network problem which gives me fits. I have a HP Wireless HP C7280 All in One Printer in one of my rooms where my desktop computer. My son and I have all two laptops that we have been able to use wireless network mode to print on the 7280. One day that my laptop (HP dv5-1002nr) even though it shows I am connected to the IP address of the printer, no longer cause the 7280 printing. All parameters show that I am connected, but when I print and go to device settings it shows the document is waiting and then print, but nothing prints from the printer itself.

  I checked all the network settings, reset everything again, downloaded the latest drivers and all without success. Today, my son has had 2 other laptops and was able to print wireless to the 7280 and it was also able to print wireless from the desktop in the same room as the printer, so we know that the issue is not with the printer. Some of these laptops are also HPs.

  At first I thought that maybe there was a problem with my LAN driver but check that and everything appears to be functional and up-to-date. What is strange, is that I can email this cell phone to my modem wireless of course work in this regard. However, no matter what we did to make sure that all our drivers and settings are correct, we are still unable to make the printer print.

  Anyone have any ideas because we are totally frustrated.

  If it looks like your question:

  After you install the product on a network, you turn off the computer, and then, and the product loses functionality. The product is no longer prints and disappears from the icon of the product in the menu devices and printers in Windows 7 (64-bit).

  Try this fix:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89191-1&LC=en&DLC=en&CC=US&OS=4063&Product=4022343&sw_lang=

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Original title: Dell Printer 966 all in one

  Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Sam Soliman
  E-mail address is removed from the privacy *.

  You shouldn't if you get it from Dell.

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you