One of the disk of node of the RAC received damage

Similar Questions

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

  Here is the error msg I get from vsphere client.

  Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

  The system cannot find the specified file

  VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

  I have ssh client due to vmware ESX.

  ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

  564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

  Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

  Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

  Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

  Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

  It seems that all the files are there. Except that there are some spaces.

  / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

  # Disk DescriptorFile

  version = 1

  Encoding = "windows-1252".

  CID = 97c834c1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  # Description of the measure

  RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

  RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

  # The database disk

  #DDB

  ddb.virtualHWVersion = "7".

  DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = 'ide '.

  ddb.toolsVersion = "8228.

  ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

  and here's a copy of the vmware.log file

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

  2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

  2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

  2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

  2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

  2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

  2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

  2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

  Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

  vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

  vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

  vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

  The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

  Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

  André

• One of the disks of rhe in this virtual machine is already in use by a virtual machine or a snapshot

  Hi all.

  An apologize for my bad English.

  I have 10 VmWare installed on Linux Centos 5.

  I worked with the Windows 7 virtual machine and hang on it.

  Now when I try to run this VM, I get this message:

  "One of rhe in this virtual machine disk is already used by a virtual machine or a snapshot.

  I try to fix it in this way:

  Re: Could not open the hard file. One of the disks in this virtual machine is already in use by a virtual machine or a s...

  mkdir ./clone
  vmware-vdiskmanager -r "Windows 7 x64-000008.vmdk" -t 0 "Windows 7 x64.vmdk"  
  mkdir /backup
  mv *.* ./backup/
  cp ./backup/*vmx ./
  cp ./backup/*vmxf ./
  
  

  But after that, I got the error: "cannot change the power state of VM: can't open ' / * /Windows 7 x 64 - 000008.vmdk.»» The system cannot find the specified file.

  Please, help me to solve the problem.

  Once again apologize for my English :)
  

  
  

  
  

  
  

  
  

  I really don't see what could be causing the problem, except that there are some .lck files in the subdirectory "lock"!

  Anyway, if worry ends snapshots and the current state is what you need, you can follow these steps (which are close to what you have already done) to merge snapshots of virtual disk in and use this virtual disk to the virtual machine:

  • Close VMware Workstation
  • Create a new subdirectory and move the VM files and folders to backup purposes
  • "" since this subdirectory run: vmware-vdiskmanager-r "Windows 7 x 64 - 000008.vmdk" t 1 '... / X64.vmdk of Windows 7 '
  • Copy the .vmx file to the parent directory and edit it as follows:
    scsi0:0.fileName = "Windows 7 x 64 - 000008.vmdk" --> scsi0:0.fileName = "Windows 7 x64.vmdk"

  Now you should be able to start the virtual machine with the cloned virtual disk.

  André

• When I tried to power on VM ends up in the right error: the specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  I stop a virtual machine after a certain time, I tried to power. Its has ended up in the following error message

  Reason: The specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  The machine was working fine before the closure.

  In the data store, the file type of the virtual machine is 'file' instead of 'virtual drive '.

  Help, please

  You are missing the file descriptor hard. The xxxx - flat hard is the file that contains the data effectively. But the xxxx.vmdk is missing, which is a text file that connects to the flat file.

  AWo

• Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.

  Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have attached the log file and the list of files in the folder of servers.

  Any help much appreciated.

  Welcome to the community,

  This virtual machine successfully powered on since July 23?

  To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.

  If this is the case, you can delete the virtual machine to inventory, edit the vmx file by

  replacement of

  scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk

  with

  scsi0:1.filename = LHMU - VIC04_1.vmdk

  then right-click on the vmx file in browser data store and add it to the inventory.

  Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.

  If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.

  If you are not sure, please post back before doing anything.

  André

• Could not open the vmdk disk or one of the snapshot disks it depends on

  I upgraded vmware fusion 1.x to 2.08, because I was getting the message

  Cannot open disk - hard or one of the snapshot disks it depends on.

  Reason: Cannot lock the file.

  So I thought that would fix it, but it didn't. I can't figure out how to fix it either. At home, I'm a PC user and use VMware player, but at work, we use Mac OS X and the merger.

  Here ARE THE CONTENTS of my VMX file

  ____________________________________

  . Encoding = 'UTF-8 '.
  config.version = '8 '.
  virtualHW.version = "7".
  MemAllowAutoScaleDown = "FALSE".
  pciBridge0.present = 'TRUE '.
  insulation. Tools.hgfs.Disable = "FALSE".
  deploymentPlatform = "windows".
  virtualHW.productCompatibility = "hosted".
  RemoteDisplay.vnc.port = '0 '.
  Tools.Upgrade.Policy = "upgradeAtPowerCycle".
  powerType.powerOff = 'soft '.
  powerType.powerOn = 'soft '.
  powerType.suspend = 'soft '.
  powerType.reset = 'soft '.
  gui.exitonCLIHLT = 'TRUE '.
  displayName = "WindowsXP_IE7."
  NVRAM = "WindowsXP_IE7.nvram."
  memsize = "664".
  guestOS = "winxppro.
  Sound.Present = 'TRUE '.
  sound.fileName = "-1".
  Sound.AutoDetect = "TRUE".
  sound.startConnected = 'TRUE '.
  USB. Present = 'TRUE '.
  EHCI. Present = 'TRUE '.
  USB. Generic.AutoConnect = "FALSE".
  ide0:0. Present = 'TRUE '.
  ide0:0. FileName = "winxp - 000001.vmdk".
  ide0:1.present = 'TRUE '.
  ide0:1.startConnected = 'TRUE '.
  ide0:1.DeviceType = "cdrom-raw"
  ide0:1.AutoDetect = 'TRUE '.
  ethernet0. Present = 'TRUE '.
  ethernet0. ConnectionType = "bridged".
  ethernet0.startConnected = 'TRUE '.
  ethernet0.wakeOnPcktRcv = "FALSE".
  floppy0. Present = 'TRUE '.
  floppy0.startConnected = "FALSE".
  floppy0.filetype = 'file '.
  floppy0. FileName = ' / Users/user/Library/Parallels/winxp/unattended.fdd '.
  floppy0.clientDevice = "FALSE".

  ethernet0. AddressType = 'generated '.
  UUID. Location = "56 4 d a7 74 d0 99 9 c - d2 70 b1 d0 25 18 9 c 5A ac"
  UUID. BIOS = "56 4 d a7 74 d0 99 9 c - d2 70 b1 d0 25 18 9 c 5A ac"
  extendedConfigFile = "WindowsXP_IE7.vmxf".
  ide0:0. Redo = «»
  pciBridge0.pciSlotNumber = "17".
  ethernet0.pciSlotNumber = "32".
  sound.pciSlotNumber = "33".
  ehci.pciSlotNumber = "34".
  ethernet0.generatedAddress = "00: 0C: 29.6 d: 01:00.
  ethernet0.generatedAddressOffset = '0 '.
  ide0:1.filename = "automatic detection".
  tools.syncTime = "FALSE".

  checkpoint.vmState = «»

  sharedFolder.option = "onetimeEnabled".
  sharedFolder.maxNum = '1 '.
  sharedFolder0.present = 'TRUE '.
  sharedFolder0.enabled = 'TRUE '.
  sharedFolder0.readAccess = 'TRUE '.
  sharedFolder0.writeAccess = 'TRUE '.
  sharedFolder0.hostPath = ' / users/person/SharedVMWare.
  sharedFolder0.guestName = "SharedVMWare".
  sharedFolder0.expiration = "never".

  pciBridge4.present = 'TRUE '.
  pciBridge4.virtualDev = "pcieRootPort"
  pciBridge4.pciSlotNumber = "21".
  pciBridge4.functions = '8 '.
  pciBridge5.present = 'TRUE '.
  pciBridge5.virtualDev = "pcieRootPort"
  pciBridge5.pciSlotNumber = "22".
  pciBridge5.functions = '8 '.
  pciBridge6.present = 'TRUE '.
  pciBridge6.virtualDev = "pcieRootPort"
  pciBridge6.pciSlotNumber = "23".
  pciBridge6.functions = '8 '.
  pciBridge7.present = 'TRUE '.
  pciBridge7.virtualDev = "pcieRootPort"
  pciBridge7.pciSlotNumber = "24".
  pciBridge7.functions = '8 '.
  vmci0. Present = 'TRUE '.

  MKS. Enable3D = 'TRUE '.

  ethernet0.linkStatePropagation.enable = 'TRUE '.

  Marked as supposed to answer

  André

• Could not open the drive or one of the snapshot disks it depends on.

  My becomes partition error "Cannot open the disc or one of the snapshot disks it depends on." and will not run. I could use some help, and after searching for similar entries in the support community, I decided to post my file "supported".  Any help would be appreciated.

  My com: MacBook Pro with Snow Leopard version 10.6.4

  Partition: Windows 7 Ultimate 64-bit

  Take a look on: Boot Camp virtual machine fails to power on

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• SVMotion one of the virtual disks?

  I am able to svmotion.pl to move a set of disks from the computer virtual and vmx files from a store of data to the other, but I have a virtual machine that has the 3 vDisks.  One contains the system files for the virtual machine and the oner contains data, while the latter contains log files.   We want to move the vdisk with the logs to another data store.  How can I do this?

  Hello

  I use the svmotion.pl - interactive and the last choice I receive is: individually would you put the disks (yes/no)

  Or you could install a graphical interface as mentioned by Franck, but again that is not supported.

  Try it and tell me how if you figured it out.

• CREATE the COUPLE of INTELLIGENCE ASSETS needs to be run only on one of the MASTER nodes.

  Hello world
  
  I'm trying to perform an active replication and standby on my solaris machine.
  
  I get the error message
  
  Command > create the pair of Eve active dts_ttdb on "cc-qa-dts", rep_test_ttdb "ESN-t2000-4;
  8130: CREATE EVE COUPLE ASSETS should only be run on one of the MASTER nodes.
  The command failed.
  The following note, let me know if there is no worng I did...
  
  
  (1) I have created a dts_ttdb of datstore on my active node, which is 'cc-qa-dts' and also added the info on the satandby in the sys.odbc.ini file as shown below...
  
  [DTS_ttdb]
  Driver=/export/home/TimesTen/TimesTen/tt1121/lib/libtten.so
  Data store = / ttvl01/TIMESTEN/dts_ttdb/ds
  LogDir = / ttvl02/TimesTen/dts_ttdb/logs
  PermSize = 400
  TempSize = 320
  AutoCreate = 0
  MemoryLock = 4
  DatabaseCharacterSet = AL32UTF8
  
  ########################################################################
  # This examples of following definitions must be in the. odbc.ini file
  # which is used for the TimesTen customer 11.2.1.
  # The name of the server is defined in the TTC_SERVER attribute.
  # The Server DSN is defined in the TTC_SERVER_DSN attribute.
  #########################################################################
  
  [rep_test_ttdb]
  TTC_SERVER = nse-t2000-4
  TTC_SERVER_DSN = rep_test_ttdb
  
  
  (2) the reference is also included in active sys.ttconnect.ini to the standby server and
  
  ###############################################################
  # This is a sample sys.ttconnect.ini file is used for the
  # TimesTen customer. It contains entries for each server.
  ###############################################################
  
  
  [ESN-t2000-4]
  Description = TimesTen Server
  Adresse_reseau = nse-t2000-4
  PORT_TCP = 53389
  
  
  (1) already created a user admin 'adm' with the active data store DTS_ttdb admin option
  
  loged as a user of ADMS to create the day before active as shown below...
  
  $ ttisql DSN = "dts_ttdb; UID = SMA; pwd = adm"
  
  Copyright (c) 1996-2011, Oracle. All rights reserved.
  Type? or 'aid' help, type "exit" to leave the ttIsql.
  
  
  
  Connect "DSN = dts_ttdb; UID = SMA; pwd = SMA';
  Successful login: DSN = DTS_ttdb; UID = SMA; DataStore = / ttvl01/dts_ttdb/TIMESTEN/ds; DatabaseCharacterSet = AL32UTF8; ConnectionCharacterSet = US7ASCII; AutoCreate=0;DRIVER=/export/home/timesten/TimesTen/tt1121/lib/libtten.so; MemoryLock = 4; LogDir = / ttvl02/TimesTen/dts_ttdb/logs; PermSize = 400; TempSize = 320; TypeMode = 0;
  (Default AutoCommit = 1).
  Command > create the pair of Eve active dts_ttdb on "cc - qa - dts.central.sun.com ', rep_test_ttdb 'nse-t2000-4;
  8130: CREATE EVE COUPLE ASSETS should only be run on one of the MASTER nodes.
  The command failed.
  Command >
  
  I get this error...
  
  Please guid me if I left the whole procedure, also the "rep_test_ttdb" is the data store created on the side of Eve...
  I am able to ping both machines to each of these respective servers...
  
  Can somone help me solve this problem of replication...
  
  Thank you
  FIFA

  You need not enter the sys.ttconnect.ini or the DSN entry (client) standby in replciation in the sys.oidbc/.ini file to activate it. These definitions shall apply client/server connectivity to the active machine to machine standby. replication uses its own separate communication mechanism for client/server connectivity.

  If you have run successfully CREATE the COUPLE of EVE education ASSETS on the data store active, then you have created the replciation defitinitions. However, several additional steps are required before replciation will be operational. Rather than try my hand at them all explain you here, please take the time to read this guide of TimesTen replciation and in particular the sections on active replication / standby pair where many key concepts is explained as well as detailed procedures for the implementation and administration of a replicated environment. This isn't something which can easily be covered in a form sufficiently detailed via a forum. If you still have the problem after that then we can address specific questions here in the forum.

  Kind regards

  Chris

• permissions changed on one of the partitions on the hard disk

  Some time ago I had to restore my computer to an earlier version. and for some reason, the permissions changed on one of the partitions on the drive hard to the point that I can't change anything EITHER and I don't know how to get back to full access.

  Former title: modified permissions

  When you follow the guide on this page, you can set the owner to yourself, as long as you are signed in under an administrator account. However, this will not work if the file or folder is encrypted.

• HP Pavilion Notebook 15-n003tx: recovery attempt failed pls select one of the buttons fowllings

  My problum is not resolved by hp

  "" recovery is not complete see the eror on screen 'attmpet to recovery doesn't have to slect one of the cast buttons "so please help me

  Details. Most likely it is hard disk problem. When you restart, see if you can get into the diagnostics (F2 as you turn on) and run a full test of the material loop.

• One of the Mac have touchscreen, and they have a flash drive?

  one of the Mac have touchscreen and they have a flash drive?

  "Flash player" is usually referring to a USB key. Do you really want to say disk solid state drive (SSD)?