ONLY INSERT OR DELETE THE PRIVILEGE TO THE DATABASE LINK

Similar Questions

• Delete the database on Windows

  Hello
  

  
  

  Could you please provide steps or relevant link to remove the Oracle database in the Windows platform?

  
  

  Oracle - 11.2.0.3.0

  OS - Windows 2003 32-bit

  Kind regards

  Bala

  In fact, I wouldn't use these steps. The main reason is that the DROP DATABASE command will not remove this annoying service. Instead, I would check the database is running, and then use the DBCA Wizard to delete the database. Not only this delete the database for you, it will be also make you the Windows registry (and therefore service) are supported properly.

  See you soon,.
  Brian

• My MacAir guard pick up ads etc. - I deleted the previous links that helped - is it a cleaning system I can implement on my Mac Air to stop it happening again

  My MacAir guard pick up ads etc. - I deleted the previous links that helped - is it a cleaning system I can implement on my Mac Air to stop it happening again

  Fixes for Adware and pop-ups:

  1. Malwarebytes
  2. 2.11 DetectX
  3. Remove the adware that displays pop-up ads and graphics on your Mac
  4. T stop advertising windows pop-up and adware in Safari - Apple Suppor

  I had good results with GlimmerBlocker.

• Cannot insert data into the database

  Hello world

  I stuck with a problem in DB juice. When I try to insert data into the database using DB tool, I get a repeated error message (error 1). Please find the my vifile below and solve say.

  Problem is use Labiew 8.2. So try to answer accordingly

  Try it with a cluster instead of a string or an array.

  

• Accidentally deleted the "Favorites" link in Windows Explorer

  I accidentally deleted the "Favorites" link in the Windows Explorer (should not be confused with the Favorites of IE).  It's the shortcuts in the upper left corner of Windows Explorer that will take you to a place in Explorer - a shortcut to a folder.  I tried right click then 'Restore favorite links' as well as the addition of the 'Links' to C:\users\Username\ folder.  None of this works.  If I try to drag and drop a folder in the Favorites, it has a red circle with a slash do not allow me to do.  I have Win 7-64 bit.  I prefer not to do a system restore, as happened two weeks ago and I don't want to spoil the other changes that have taken place since then.  Any help would be so appreciated.

  Try this information to restore the links folder.  It is manual or automated instructions on this page:

  http://www.SevenForums.com/tutorials/18583-user-folders-restore-default-location.html

• Is there a way I can show only new contacts to the database after a contact download?

  I downloaded a set of contacts, and I was wondering if there is a way to display, segment, filter on contacts only recently added to the database contact Eloqua?

  Thank you very much

  If you add to a Contact Group at the time of the download, you can run a filter to check:

  (1) membership in the contact group

  (2) created contact date

  The number of new registrations added as indicated in the email confirmation of shipment or download history to confirm the number reported (and visible) through your filter. I hope that helps!

• How to insert data into the database using smartview

  Hello
  I am trying to insert data into the database using * "Send data" * button on the Ribbon of Essbase.
  My database is empty.
  
  I opened an ad hoc network, it returns * "#missing" * in all cells
  I have modified the cells and provided data in the cells that I want to. Now, I supported on * "Send data" * button.
  It just reloaded the adhoc grid instead of submit data, I rechecked the data through data console Administrative Service are not inserted.
  
  I am following the right way to insert data? If not, could you please suggest me how (Populate) insert default data in the database?
  
  --
  VINET

  You go about it the right way, once you have submitted if you réactualisiez then data values should be there, if you POV is against members of dynamic calc and then data not written to the database, you need to check the Member properties of your POV.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Inserting record in the database and then display on the next Page

  Hello!

  For a while since I posted here, but I've been pulling my hair out on this one.  Here's what I want to do.  I have a page that I want to be able to enter text in two form fields, then click on "Insert disc", and then on the next page, I just submit display.  For example, on the "insert.php" page I want to enter the field ID and Joe 43569 in the first name field.  Then after I click on submit (or insert record) the next page will have a text that says: "congratulations Joe, your ID is 43569.»  Have a great day! "Or something to that effect.

  I have the database mySQL, set up and insert records into it since this page works correctly.  Here is the code of my insert.php page which I think is the issue.   I'm just confused as to which should be added to the page detail.php to have this sentence appears correctly.  Is there something that should be added to the code on the page insert.php?  Something after the detail.php on that first line?

  Thank you, thank you, thank you in advance.

  Brent

  $insertGoTo = 'detail.php ';
  If (isset {}
  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;
  $insertGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $insertGoTo));
  }
  ? > <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  < do action = "<?" PHP echo $editFormAction;? ">" method = "post" name = "form1" id = "form1" >
  < table align = "center" >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > ID: < table >
  < td > < input type = "text" name = "ID" value = "" size = "32" / > < table > "
  < /tr >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > first name: < table >
  < td > < input type = "text" name = "lastName" value = "" size = "32" / > < table > "
  < /tr >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > < table >
  < td > < input type = "submit" value = "Insert file" / > < table >
  < /tr >
  < /table >
  < input type = "hidden" name = "MM_insert" value = "form1" / >
  
  < / make >

  When you submit the form, the form fields values are passed to the query insert as variables of $_POST, but as soon as you redirect the user to another page, these variables are destroyed.

  There are two ways to preserve the values: use sessions and session variables, or add values to the end of the redirect URL query string. Using the variables of session is probably easier since you can do it at the top of the page that inserts data into the database without affecting the code of Dreamweaver Server behavior.

  Put this at the top of the current page:

  In details.php, add top of the page. You can then use $_SESSION ['ID'] and $_SESSION ['name'] to display the values.

• Delete the database with lost initdb.ora

  Hi guys. How can I remove database with file init lost? I just want to recreate the database (with recovery or restoration of the process)
  
  1. I can't start because I do not have init.
  2. I can't delete the database because I can't start.
  3. I can't recreate database using dbca as the same name somewhere is:)
  
  Published by: America on January 18, 2009 12:03

  When you run "dbca" you can select "delete the database" and find the old name of the database?
  If find... You can select and delete... dbca will ask... But you and click on remove in any case.

• How s/n know when and what account perform a function using the database link?

  Dear,

  My application of the CIM team asked DBA to create new function and run it. Function must use the database link for remote database data. So I need to create a new database to their licensing link. Cause we guess we'll experience the performance issue after the user performs this function, or another question and errors may occur. So we want to know when and who use this feature that connects to a remote database through the new database connection in advance. And I also need to know when and which connect to the remote database using this new database link. We have no idea to get this information?  Can anyone recommend how do? Thank you very much.

  Best reqards, Otis.

  Check what business purpose, it will solve.  If the function is so safe, why everyone will use. Only admin people should access.

  All of these additional controls of this kind must be avoided as much as possible to improve the overall performance of the application.

  Still if you need, see the database audit mechanism, specifically designed for this type of activity.

  Kind regards

  Harman

• try to reduce the database links

  Hello. Thank you for helping.
  
  
  I think my basic question is this:
  
  
  I can connect and create database links that can be used by all other users (and tablespaces?) on the server?
  
  
  I have a bad understanding of how the areas of storage, dblinks and users go together, so I'll briefly describe my setup process so you can see how I have things that can be part of the cause of my confusion, possibly in a subtle way.
  
  
  For this example, I have 2 servers with Oracle 11 g Enterprise.
  
  
  After you create a database, I then create tablespaces, users and links like this:
  
  
  On server 1:
  
  
  create storage my_app1
  create the user my_app1
  create storage my_app2
  create the user my_app2
  
  
  and so on for all areas of storage and users on the server.
  
  
  Then log in as my_app1 and create a link of database on server2:
  
  
  link_to_s2 fixed my_app3 user
  
  
  Then log in as my_app2 and create a link of database on server2:
  
  
  link_to_s2 fixed my_app3 user
  
  
  Same process on server2:
  
  
  create storage my_app3
  create the user my_app3
  create storage my_app4
  create the user my_app4
  
  
  and so on to server2.
  
  
  Then log in as my_app3 and create a database link to server1:
  
  
  link_to_s1 fixed my_app1 user
  
  
  Then log in as my_app4 and create a database link to server1:
  
  
  link_to_s1 fixed my_app1 user
  
  
  It operates well for me, except that I have to create four dblinks.
  
  
  Is everything I see how this can be simplified to create dblinks less?
  
  
  Any suggestions are greatly appreciated.

  Hello..

  Why not create a public database link.

  Documents: -.

  Specify the PUBLIC to create a public database link available to all users. If you omit this clause, the database link is private and is only available to you.
  [http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_5005.htm#sthref6315]

  Anand

• Using the database links in a process of page plsql

  I try to use a database link in a process of pl/sql page.
  

  It works fine when I use the link name in the plsql like this:

  BEGIN 
  SELECT  
  CARD_ID 
  into   
   :P12_HDR_CARD_NUMBER  
  from     [email protected]; 
  

  But the name of the link will come an element of page (P12_DBLINK) filled as follows:

  select db_link d, db_link r from user_db_links;  
  

  I tried the following and it doesn't work:
  

  DECLARE 
  l_link VARCHAR2(30); 
  BEGIN 
  l_link :=  :P12_DBLINK; 
  SELECT  
  CARD_ID 
  into   
   :P12_HDR_CARD_NUMBER  
  from     fusion.EXM_CC_COMPANY_ACCOUNTS@l_link; 
  

  It gives me:
  

  • ORA-04052: error occurred when searching to the top of the remote object MERGER. EXM_CC_COMPANY_ACCOUNTS@L_LINK. WORLD ORA-00604: error occurred at recursive SQL level 3 ORA-02019: description of the connection to the remote database not found

  I thought that perhaps the name of the link was joined with. WORLD automatically but already has the name of the link. WORLD at the end I tried stripping first but the error is the same.

  Is there some synatx for what will work? Can I use dynamic sql statements?
  

  Any suggestions are most appreciated.

  Thank you

  John

  Hi John,.

  see the following example to use the execute immediate for your purpose

  SQL - Variable for the name of the database link - Stack Overflow

  Let me know if that answers your query in the active thread

• Authentication of database through the database link

  Is it posible to use database authentication in the APEX by link of database and how?

  Also is it posible to reading user roles through the database link?

  Database links to establish the connection, so you lose the context regarding which is recorded in a single user.

  Custom authentication can do some PL/SQL you need, but I would say that replicate your tables locally through something as materialized views.

  You could also potentially be used dba_role_privs, but do not forget roles can be turned on/off.

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• a doubt on the database link

  Hi all
  
  I use 10.2.0.1.0 oracle.
  
  I had 2 databases named ( ora1, ora2 ).
  in fact, I have to connect to ora1 and to use tables, procedures exist in ora2.
  
  So, I've created database ora2 as database link:
  
  CREATE DATABASE LINK ora2_test
  CONNECT to ora1_user
  IDENTIFIED BY ora1_password
  Using of "ora1";
  
  Here is ora2_test name of the database link.
  
  Am I wrong?
  
  I am connected to ora1 as
  connect ora1_user/ora1_password@ora1;
  Select * from redg@ora2_test;
  
  but I get the error message.
  
  Any help please.
  Thank you

  Please post the answer as correct/useful.

  Asif kabir