Only LED blinking indicates problem of CPU on laptop HP Pavilion dv6z-1100 CTO. Can I reformat?

Similar Questions

• Black screen with cursor blinking on HP Pavilion dv6z-3100 CTO Entertainment Notebook PC

  I have a HP Pavilion dv6z-3100 CTO Entertainment Notebook PC that I bought in 2010 and recently my brother was messing around with it and wiped the whole pc now im unable to use it because when I turn it on after one so that it displays a black screen with a cursor blinking (the typing cursor) and I don't have any recovery disk is a drive that I can use it to restore my computer for example a windows 7 64 b + supp 2 recovery?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP Pavilion p7 - 1050t CTO Deskt: graphics card problem of 610 GT desktop HP Pavilion p7 - 1050t CTO

  I have a HP Pavilion p7 - 1050t CTO desktop PC and you want to install a GE video card FORCE GT 610. Online research indicates that the card must be compatible with this motherboard (PEGATRON CORPORATION 2AC2). The BIOS is FRIEND V7.14 dated 11/08/2011.  I have improved the power supply to a 750 W unit and 8 GB of RAM. I'm on Windows 10. The jury has a PCI slot express v2.0.

  When I install the card, the computer does not start after the first blue screen to press ESC for installation. At this point, the computer hangs and must be turned off manually. If I remove the card and back on board graphics, everything is fine.

  I just wanted to update the chart because the edge does not support OPEN GL 3.2 graphics, I need new software recently purchased.

  I'm sure that's not the card as this is the second card I tried, with the same results.

  Any help appreciated.

  Never mind.  I decided to just buy a new computer.

  Thank you.

• Upgrading CPU for laptop HP Pavilion ze2355ea?

  Hello

  My first post - please be gentle!

  Can someone tell me if it's worth upgrading my CPU to a 1.6 GHz AMD Turion™ 64 processor ML-30, say, a ML-40 2.2 GHz or 2.4 GHz ML-44?

  And if it's worth the upgrade, I would find a significant difference in performance between the ML - 44 (available on ebay for over US$ 120) or the ML-40 (around US $60 or less).  Do I have other options for a CPU upgrade that correspond to a Socket 754?

  Some background info: I have a ze2355ea HP Pavilion 6 years old Notebook, running Windows XP (Service Pack 3), with original material specification following:

  Microprocessor AMD Turion™ 64 processor ML-30

  The microprocessor Cache Memory 1 MB level 2 cache

  Memory 1024 MB DDR 333 MHz (2 x 512 MB)

  Max memory up to 1 GB

  Video Graphics ATI RADEON® XPRESS 200 M IGP graphics card

  128 MB of shared video memory

  Hard drive 60 GB 4200 RPM

  Multimedia player DVD Writer double Format (+/-R +/-RW) with support Double layer

  15.0 "XGA TFT Brightview display

  I am not in a position to buy a new laptop now, but desperately need to improve performance and storage for internet streaming video and RAW photo editing.

  So, I've recently updated the RAM 2 x 1 GB ByteStor, and a 160 GB 5400 RPM Samsung HARD disc.  I've also updated my BIOS and other drivers with the latest versions, I can find.

  The increased capacity of the HARD disk is large and HARD drive access times are significantly improved, but the doubling of RAM from 1 GB to 2 GB did me not increase speed and stability that I expected to when running resource hungry applications in resources, such as RAW photo editors.

  But back to my questions of title.  It's worth the shot of upgrading me the 1.6 GHz AMD Turion™ 64 processor ML-30, for a 2.2 GHz ML-40 or 2.4 GHz ML-44? Can I find a noticeable difference in performance between the ML - 44 (available on ebay for over US$ 120) or the ML-40 (around US $60 or less).  Do I have other options for a CPU upgrade that correspond to a Socket 754?

  I'm perfectly comfortable disassembling and rebuilding my laptop, after already taking part to resolder a doubtful DC power outlet, so falling into a new CPU doesn't discourage me.  I would like to just some assurance that I would spend my money wisely.

  Thank you very much in advance for any advice.

  See you soon

  HighlandBimbler

  HighlandBimbler wrote:

  Hello

  My first post - please be gentle!

  Can someone tell me if it's worth upgrading my CPU to a 1.6 GHz AMD Turion™ 64 processor ML-30, say, a ML-40 2.2 GHz or 2.4 GHz ML-44?

  And if it's worth the upgrade, I would find a significant difference in performance between the ML - 44 (available on ebay for over US$ 120) or the ML-40 (around US $60 or less).  Do I have other options for a CPU upgrade that correspond to a Socket 754?

  Some background info: I have a ze2355ea HP Pavilion 6 years old Notebook, running Windows XP (Service Pack 3), with original material specification following:

  Microprocessor AMD Turion™ 64 processor ML-30

  The microprocessor Cache Memory 1 MB level 2 cache

  Memory 1024 MB DDR 333 MHz (2 x 512 MB)

  Max memory up to 1 GB

  Video Graphics ATI RADEON® XPRESS 200 M IGP graphics card

  128 MB of shared video memory

  Hard drive 60 GB 4200 RPM

  Multimedia player DVD Writer double Format (+/-R +/-RW) with support Double layer

  15.0 "XGA TFT Brightview display

  I am not in a position to buy a new laptop now, but desperately need to improve performance and storage for internet streaming video and RAW photo editing.

  So, I've recently updated the RAM 2 x 1 GB ByteStor, and a 160 GB 5400 RPM Samsung HARD disc.  I've also updated my BIOS and other drivers with the latest versions, I can find.

  The increased capacity of the HARD disk is large and HARD drive access times are significantly improved, but the doubling of RAM from 1 GB to 2 GB did me not increase speed and stability that I expected to when running resource hungry applications in resources, such as RAW photo editors.

  But back to my questions of title.  It's worth the shot of upgrading me the 1.6 GHz AMD Turion™ 64 processor ML-30, for a 2.2 GHz ML-40 or 2.4 GHz ML-44? Can I find a noticeable difference in performance between the ML - 44 (available on ebay for over US$ 120) or the ML-40 (around US $60 or less).  Do I have other options for a CPU upgrade that correspond to a Socket 754?

  I'm perfectly comfortable disassembling and rebuilding my laptop, after already taking part to resolder a doubtful DC power outlet, so falling into a new CPU doesn't discourage me.  I would like to just some assurance that I would spend my money wisely.

  Thank you very much in advance for any advice.

  See you soon

  HighlandBimbler

  Hello

  The only faster processors that are compatible with the motherboard of your laptop are the:

  Mobile AMD Turion 64 ML-37 (2.0 GHz)

  Mobile AMD Turion 64 ML - 34 (1.80 GHz)

  Mobile AMD Turion 64 ML - 32 (1.80 GHz)

  The 40 ML and ML-44 are not supported by the BIOS.  It would be a waste of your money to buy.  The Mobile AMD Turion 64 ML-37 (2.0 GHz) is a supported processor. Given that the increase would be + 400 mhz it would be a significant increase in performance.

  Best regards

  Eric

• Where can I find what should be my temperatures of the CPU for laptop HP Pavilion DV7-6195us?

  I download a software to view the inside temperatures and even if they have little symbols (green check, red/yellow flame, etc.) by every internal part (e.g. CPU0) I want to know what HP internal temperature range is recommended.  Thank you.

  What CPU is installed in your laptop?

  It isn't really a question of what HP is recommended. Your concern should be what the CPU manufacturer lists as Tjunction for the CPU.

  If your laptop is the Intel Core i7-2630QM installed then lists Intel 100 c as TJunction. I found the technique for your laptop here. You should be concerned if you see time > 85 degrees Celsius. Here is a link to Intel for your processor plug.

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• Portege Z930 - 14L - DC orange led blinks 8 times and green ECO light led

  Portege Z930 - 14L. I can't boot from the last power since.
  The domain controller in the orange Led blinks 8 times and eco green light led is lit.

  DC IN flashing ornage indicator indicates a problem with the power supply. Initially, you should try plug the adapter HAVE an another power outlet. If she does still not work, you should contact Toshiba ASP (authorized service provider)

  Electronic supply on the motherboard is probably the problem.

• Satellite A100-847 battery led blinks 11 times, absence of motherboard?

  Hello

  14 months (only 12 months warranty), I have a Satellite A100-847 was a laptop perfect, but 2 weeks ago the ac-adaptar falls down and since then that if I push the power button the battery orange led blinks 11 times with the same length, but nothing happens.

  ASP did not now what this flashing means but think I have a motherboard problem.
  Now I found on ebay a Satellite A100-153 and my question is, is this the same motherboard, because it's also 945 PM.
  (Sorry for my bad English)

  [Satellite A100-847: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=120570&DISC _ MODEL = 1 & service = EU]

  [Satellite A100-153 | http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=DE&PRODUCT_ID=112714&PRODUC T_ID = 112714 & toshibaShop = false]

  THX.

  It seems that two laptop computers support the same motherboard as the Satellite A100-847 and Satellite A100-153 belong to the same series of PSAA9E.
  This series uses the same drivers and the same BIOS so I think that the mobo must also be the same.

  PS; I think that it is a motherboard problem too. Such a code is displayed only if a hardware failure has been detected on the motherboard.

  Best regards

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  is it because of power problems?

  Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.

• Skype allows log on but indicates problems of window and hang up

  Using Vista

  Connection to: Skype allows log on but indicates problems of window and hang up

  "each newspaper time I say 'Hello'" the box appears and says "window problem."

  and discontues the connection w sykpe?      Help, please

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Premiere Pro is mess up my audio/video synchronization. Use Handbrake really the only solution for this problem?

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files). The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." phone I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  Uses 3rd party freeware really the only solution for this problem? Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  Hi Christafarian,

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files).

  You wouldn't be the first. I'm sorry.

  The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." the phone

  I found:

  • If you pull the iPhone in a well-lit environment, it records at a constant speed.
  • In lighting challenged environments, you get images image variable rate.

  I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  For this project, you're probably stuck with transcoding with Handbrake or another method not Adobe. Our coders simply do not handle variable frame rates.

  Uses 3rd party freeware really the only solution for this problem?

  With Premiere Pro and this project, you have no other choice. For future projects, look into purchasing a high end video camera application where you can shoot at a constant rate regardless of the stage lighting.

  Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  If you like Premiere Pro to support variable frame rates, please create a feature request. Otherwise, I hope my tips will help you in the future.

  Thank you
  Kevin

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Re: Qosmio X 300 - 112 Blue led webcam chicony problem

  Hello!

  I currently own a Toshiba Qosmio X 300-112
  It runs on windows Vista Premium Dutch Version

  Everything seems to work fine except for a Chicony Webcam.
  When I start the Webcam, it behaves as expected when it is sufficiently advanced.
  However, when the daylight fades / when she becomes troubled a clear blue color appears in the lower corner to the right of
  the video player.

  When there is no natural light, left, during the evening, this blue color is visible in the bottom right.
  It has an apparent surface of about 3 by 4 centimeters.

  I've already searched the internet for similar problems about this chicony webcam but I find no results.
  Toshiba technical support couldn't help me either, they have even stated that the problem with the blue colour occurs on any computer toshiba laptop with this type of mounted chicony webcam.

  I can't image that this is true because I never heard of someone on this subject.
  I can mention about this problem, is it's probably a problem that isn't in the Qosmio x 300 series.
  The evidence I found was a detailed picture of the cover of the qosmio X 300 on the site of toshiba LCD.

  The position of this webcam was exactly the same as with my laptop.
  When I added all these findings together, other users should experience this problem more or less.

  Is this true? Can someone post if he / she has the same problem?
  Thank you very much

  regarding

  EndY

  Post edited by: Endy

  > The evidence I found was a detailed picture of the cover of the qosmio X 300 on the site of toshiba LCD.
  Can you post the link?

  I read your announcement carefully, but I don't understand exactly what you mean. Can you did the screenshot and the load to http://imageshack.us/?

• HP Pavilion g7 - 1117cl: problem with starting up laptop

  My laptop simply no longer lights. I have a laptop HP Pavilion g7 - 1117cl... It was to have a cooling fan problem so I disassembled the laptop and he has succeeded, then reassembled and tried to turn on, but nothing... I disassembled again to see if there was anything, I done wrong and maybe found nothing so I put it back together and still nothing was. There is no battery connected, only the charger is plugged. Any suggestions?

  Hi there @DaMan23,

  Before you replaced the fan, did you get to try a BIOS reset? If this isn't the case, please put back the old fan in Notepad and try to do a reset of the BIOS with the old fan in.

  You receive errors with the old fan? What led to replace you the fan? The reason I ask is because of way General, the laptop must have some sort of indication that it starts. Even if the fan is malfunctioning. The fact that yours won't start not even for 1 second leads me to believe that the issue is not the fan.

  I looked the part number that you provided me. The fan you bought does not appear to be a part of certified HP. That said, there may be complications resulting from a scenario like that. I can't guarantee the functionality of the parts of a Web site not HP.

  Here's your Guide to Service and Maintenance. You will find the part number for the fan you need 639460-001. This includes the thermal replacement hardware.

  You can use the HP part Surfer to order a new fan that will be compatible with your laptop.

  If any step in this post helps you solve the problem, please click accept as Solution so that others can find the steps that help.

  Thank you!