HP Pavilion g7 - 1117cl: problem with starting up laptop

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• HP Pavilion g7-2240us: problem with WiFi

  Hello.

  I had a few problems with the WiFi lately.

  Whenever I turn on the laptop, the internet conection is limited. I have to run the troubleshooting of Windows everytime I turn on my laptop to solve this problem.

  I've updated the Wifi drivers through Windows Update, but the problem persists.

  What can I do to fix this?

  Laptop model: HP Pavilion g7-2240us

  Windows 8

  There are many things that can go wrong with wifi.

  Here is a good place to start your troubleshooting.

  If the problem seems to occur when returning from Standby Mode, then you can move on to configuring power wifi Options.

  Most wireless devices can be disabled by the system for saving energy. In some scenarios of sleep, the unit is unable to wake up properly when the system comes back from sleep or hibernation. To avoid this, set the parameters of the wireless adapter power management

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• a lot of problems with start-up

  2010 Macbook Pro.

  I have many problems with the start-up. I have to turn power off (force) and start my Mac 5 or 6 times before it works. I pass by the Verbose Mode, Safe Mode, single-user mode for her to come at last.

  Other that startup issues very well the functions of Mac.

  It might be that I need to make an appointment with a Mac Genius bartender, but how much money should I be budgeting for it to get this fixed number.

  Some advice about this?

  Please and thank you

  Ask the bartender!

  The evaluation is free. One note though: 2010 models are known for their graphics processor failure. If that's what the cause of your questions, need to replace the logic board. Since it is the age which is not advisable (too expensive).

• Problem with start

  Hello! I'm new to the forum and I have a serious problem with my laptop, it's the starup my pc keeps everyone to suddenly stop and the message that appears tells me that it's supposedly overheating and there I tried to remove the battery and work directly on the sector, but the problem is still not resolved. Who can help me to quickly solve the problem? Thank you
  PC brand: HP G72

  Hi, start screen display 30 b error?  If so, it should be associated with fan. You will need to check the fan - something that doesn't work don't as appropriate no - dust-dirts or sth captured inside fan... Thank you!

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• HP Pavilion dv6 3110ez: problem with video drivers

  Best regards to all,
  Can someone post a links to drivers for these graphics cards with switchable?
  I tried different drivers, and it does not work on Windows 8 Pro x 64
  and Windows 8.1 Pro x 64.

  The laptop is HP Pavilion Dv6 3110ez.

  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv6 Notebook PC
  BIOS: Default system BIOS

  Processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  Memory: RAM 6144MB

  **********************************************************
  It's the code of the ATI Mobility Radeon HD 5000 Series:
  ------------------------------------------------------
  Hardware ID:
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C & REV_00
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C
  PCI\VEN_1002 & DEV_68E0 & CC_030000
  PCI\VEN_1002 & DEV_68E0 & CC_0300

  Compatible IDs:
  PCI\VEN_1002 & DEV_68E0 & REV_00
  PCI\VEN_1002 & DEV_68E0
  PCI\VEN_1002 & CC_030000
  PCI\VEN_1002 & CC_0300
  PCI\VEN_1002
  PCI\CC_030000
  PCI\CC_0300
  **********************************************************
  **********************************************************
  It's the code of the integrated graphics card (Intel):
  --------------------------------------------------
  Hardware ID:
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C & REV_02
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C
  PCI\VEN_8086 & DEV_0046 & CC_030000
  PCI\VEN_8086 & DEV_0046 & CC_0300

  Compatible IDs:
  PCI\VEN_8086 & DEV_0046 & REV_02
  PCI\VEN_8086 & DEV_0046
  PCI VEN_8086 & CC_030000
  PCI\VEN_8086 & CC_0300
  PCI\VEN_8086
  PCI\CC_030000
  PCI\CC_0300

  **********************************************************
  **********************************************************

  I solved this problem with the drivers of AMD.  As there'are the drivers of this model of graphics card just for Windows 7 and not later versions of Windows, I just installed this driver in compatibility mode. All drivers for Windows 7 can be downloaded by following this link. Concerning

• Desktop HP Pavilion - p7 1549: problems with my desktop HP Pavilion - p7 1549

  I have problems with my desktop computer, do very strange things.  A few weeks ago, it would not start and complained no found boot device.   I went into the bios setup and just reset the values by default and it worked for a few weeks.  Now it does not start at all.

  I tried to access the system with F11 recovery and he complains about some secure boot options, I tried to disable secure boot and it still does not work.

  I tried to put another disc in and install Windows on it, but I could not.  Is it possible to upgrade the BIOS by booting to a USB port?  I tried to download the new bios file, but it didn't do anything after that I ran it (he didn't not create a folder for me).

  Everything seems really slow, takes a few minutes to get into the bios or boot options.  I took out the hard drive and plugged into another computer with an external enclosure and my other computer recognizes the drive.

  I tried to do a system restore to factory default start repair/restore and all have failed.  I deleted very recently on the main partition on my drive to try to install 10 Windows on the drive.  The computer appears to be frozen for a long time before continuing with the guests of installation.

  I took out the CMOS battery and you press the power button with the computer unplugged.

  Don't know what else I can try, I'm starting to think that something is wrong with the motherboard.  The computer starts up fine and I can boot a USB Windows install and the keyboard, mouse and video work.

  I think the next thing I will try is tent to start on a standalone update or ubuntu USB boot bios.

  Not really concerned about my data, I just want to get this computer working again.

  Any suggestions are appreciated, thank you.

  Thank you for the additional information.

  No, you can create a copy of the recovery media.  However, you can purchase the HP media .  If you decide to do a full install, check here first to make sure that the software and drivers are available.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A200/A205 - problems with start-up and sleep modus

  I have a problem with my Toshiba (running on Windows Vista).

  When I start the computer, sometimes it starts normally. But often, it starts to beep, I can hear the fan start fan and lights up blue. But the system unbootable and I see only a black screen. When I turn off and try again, the ringtone happen or it starts normally. Sometimes I have to turn it on three times and sometimes it starts the first time.

  The other problem is when my laptop into sleep mode. Sometimes when I push to the bottom of the screen, but also when it rises. It turns into sleep normally, but it won't come out. I see only a black screen. I always turn it off and restart.

  I don't know much about computer and computer-language programs, but I really hope someone can tell me what to do. I bought recently and I can't work with it like I want to.

  Hello

  This code beep at startup always means there's a bad material work so I think that there is not much you can do.
  The problem could be related to everything, RAM, card graph, processor, motherboard, etc. and it is not easy to diagnose it exactly.

  What you can do is to test the RAM with Memtest86 or other memory diagnostics tool. Maybe he can find something

  If this isn't the case, I recommend you contact an authorized service provider. Guys can you help solve this problem. :)

• Pavilion 14-v202tx: problem with the driver

  Hello

  I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

  My laptop HP Pavilion 14-v202tx

  Please help me

  Hello

  Broadcom Wifi

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66445.exe

  Broadcom Bluetooth software

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66402.exe

  PCI device

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Kind regards.

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• Pavilion 500-108es: problem with HP Pavilion 500 - 108es BIOS? password

  Hello

  We have a HP Pavilion 500-108es provided with

  This screen. "Enter the password for start" would be the translation. Guy said he didn t wrote a password in the BIOS and swear by himself, it seems.

  I tried to remove the CMOS battery, change, a clear CMOS, etc... but nothing has worked.

  ¿Any idea?

  Thank you!

  Hello:

  For your desktop PC, you need to move some jumpers to clear the BIOS password.

  Please see the link below... Erase password settings.

  http://support.HP.com/us-en/product/HP-Pavilion-500-100-desktop-PC-series/5395585/model/6559295/document/c03757575/

  Important: The instructions as you see them on the Web page are not quite correct.

  I modified the instructions below...

  To clear the password BIOS follow these steps:

• HP Pavilion g6-1262sj - problem with drivers

  Hey.

  I have HP Pavilion 1262sj g6 l aptop

  And I have a problem with the drivers.
  I've attached screenshots, after dwolonds all the drivers of HP's official website.
  It continues to be a problem and the number of unidentified drivers, my computer's Wi - Fi works do not!
  WIFI is disabled in Device Manager... I alsoput there a screenshot
  Thanks for the help.

  

  

  Hello:

  Here are links to the drivers you need:

  SMBus Controller: Install this driver first and then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94402-1&cc=us&DLC=en&LC=en&OS=4063&product=5170332&sw_lang=

  BCM20702

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101140-1&cc=us&DLC=en&LC=en&OS=4063&product=5170332&sw_lang=

  Network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Dev PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100467-1&cc=us&DLC=en&LC=en&OS=4063&product=5170332&sw_lang=