Only one account on the computer is not a Director

Similar Questions

• 2 two IP address are reported to use my home network and both are reported to be in the same IP addresses. I have computert that one and only one account with the provider.

  My computer is to launch my a note that I have another computer on my network using the IP, I do not understand.

  I have a stereo Kardon Karmon, a drive Sony DVD with WIFI and a printer with WIFI. 2 mobile phones and that's it. All meant to share my home network. The dvd player will not acquire the web well that directly connect to the modem. I did not any changes for several months.

  RA

  What is wifi has an IP address.  This situation occurs generally if the INVESTIGATION period have the value static or more likely in your case that the whole of the network (including the router) need to be restarted.  Usually if you restart all devices at the same time it will erase it

• only one account on computer but listed as a guest account

  I have windows 8 on my HP and the only account on the computer is mine, but I am registered as a guest, so I can not delete the files from my computer, or I can approve the updates. Noone took the computer apart myself. When I go into the settings and change the computer parameter to users, there is not yet an option to add/remove users. I contacted HP support and they wanted $99.00 to solve this problem for me.

  There are several ways to do it, maybe, another will prove more successful.  Here's all that come to mind right now.  The keys WindowsLogo + R to open the run.

  • Start/Run COMMAND. EXE > users and the security for the family accounts > change account Type
  • Start/Run NETPLWIZ > double-click account > set belonging to the Group and together as an administrator
  • Click Start > computer management > users section and local groups > double click on account, then add membership to the Administrators group
  • Run this command at the command prompt, replacing username with the real user name you want to change: net localgroup administrators username / add

  That's all I can think of at this time, but once you are connected with a level account administrator (or the built-in by default), the avenues above should allow you to join your other account and set it as admin level so it can do things.

  You can also use any of these methods by resetting the password of the other account, but I don't recommend that unless it is an absolute last resort, because it is permanent damage, including the possibility of losing your encryption keys and lose access to all your data, as if your computer has dropped in the ocean. You don't want this kind of data loss.  And if you go to the risk of changing a password with these methods, save ALL your files first.

• How can I change the automatic country setting that is displayed in the payment gateway billing address? There is only one country in the drop-down list, not my current country

  How can I change the automatic country setting that is displayed in the payment gateway billing address? There is only one country in the drop-down list, not my current country

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• Hi, I have bought LR6 and installed cloud creative ok, but when you go to installation of Lr, it allows only one installation of the trial version, the other options are to buy. I expect that when I pay 129 euros for the LR I can install it easily and not

  I bought LR6 and installed cloud creative ok, but when you go to installation of Lr, it allows only one installation of the trial version, the other options are to buy.

  Serialize Lightroom trial to activate like Lightroom 6 CC

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Y at - it a print to print only what is on the computer screen?

  Y at - it a print to print only what is on the computer screen?

  Not directly. Take a screenshot and print the PNG resulting on the desktop.

  (141553)

• What to do if the computer is not compatible with windows 7

  I have a computer that has lost the ability to use Windows XP by notice on my screen.  When I ran to the compatibiliy Windows 7 audit, the computer is not being upgraded to be compatible with windows 7.  What are my options?  I can't get a new computer.  How can I make my Windows XP operating system works?

  To repeat one of my previous questions, what was the view of your receipt of no longer being able to use Windows XP?

  And what if you can recall, happened to the computer just before you started to have this opinion?

  Normally, except in the case of substantial changes to the hardware, once Windows XP has been activated - as it was to the company - she should stay enabled.

  If the computer is connected to the company network, there may be questions to use as a stand-alone computer (which can be fixed).  In addition, there is a body of thought that holds that any used computer should have re-installed Windows.  A computer company, however, is much less likely to have "bad things" about it as previously used by an individual.

  The reason that many new computers is coming with OS CD is that Microsoft gives the leading manufacturers (the so-called "Direct OEMS") the opportunity to provide a built-in method to restore the computer to its State 'cost-of-the-factory' rather than provide the CD of the OS.  See How to restore or reinstall Microsoft Windows on a Dell computer.

  It is possible, however, that the it Department of the company that has purchased the computer completely erased from the hard drive and loaded a company custom 'image' right under Windows XP and applications that the company wanted to have on its computers.  If this is the case, you can be out of luck unless you can go back to the COMPUTER service company and ask for their help.

  Finally, it is possible that you may be able to get a set of backup from Dell disks: http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form?c=us&l=en&s=gen&redirect=1

• I want to use Windows 7, the computer will not accept my 25 digit product code please help

  I want to use Windows 7, the computer will not accept my 25 digit product code - please help.
   

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• I got XI of Acrobat Pro installed but the computer has not broken. I want to register this product so that it can be installed on my PC replacement. How to do this please?

  Acrobat Pro XI installed, but the computer has not broke. I want to register this product so that it can be installed on my PC replacement. How to do this please?

  registration is not necessary to install on a pc replacement.

  Just use your serial number and your installation files to install xi acrobat on your new computer.  If you see an error account is activated and you cannot disable the acrobat on your broken computer, use a browser that allows cookies and popups, contact support to adobe for hourly pst by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request a number of activations reset.

• I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  You accidentally type in a redemption code when he says he only wants a serial number?

• How can I keep only one instance of the javafx application at the same time?

  Hello
  How can I keep only one instance of the javafx application at the same time?
  Let not the user run the javafx application is running on your PC.

  Hello. This program does what you want. You can probably find a better solution.

  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.layout.StackPane;
  import javafx.stage.Stage;
  
  import java.io.BufferedReader;
  import java.io.File;
  import java.io.FileReader;
  import java.io.FileNotFoundException;
  import java.io.*;
  import java.nio.channels.FileLock;
  import javafx.application.Platform;
  import javafx.stage.WindowEvent;
  
  public class Simpleapp extends Application {
  
      public static void main(String[] args) {
  
          launch(args);
      }
  
      @Override
      public void start(Stage primaryStage) throws Exception {
  
          final File file = new File("flag");
          final RandomAccessFile randomAccessFile = new RandomAccessFile(file, "rw");
          final FileLock fileLock = randomAccessFile.getChannel().tryLock();
  
          System.out.print(fileLock == null);
          if (fileLock == null) {
              Platform.exit();
          }
  
          primaryStage.setTitle("Hello World!");
          Button btn = new Button();
          btn.setText("Say 'Hello World'");
  
          StackPane root = new StackPane();
          root.getChildren().add(btn);
          primaryStage.setScene(new Scene(root, 300, 250));
  
          primaryStage.setOnCloseRequest(new EventHandler() {
  
              @Override
              public void handle(WindowEvent arg0) {
                  try {
                      fileLock.release();
                      randomAccessFile.close();
                      System.out.println("Closing");
                  } catch (Exception ex) {
                      System.out.print(ex.getMessage());
                  }
  
              }
          });
  
          primaryStage.show();
      }
  }
  

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.