Only second grepping through letters from the end of a Word

Similar Questions

• Printing [HP Deskjet F2480]: Letters at the end of sentences are weak/fuzzy.

  The printer prints, but the letters at the end of sentences (it is literally the end of the phrases, not near the right margin) are weak/fuzzy.  Cartridge has recently been replaced by the dealer.

  System: Windows 7-32 bit

  It is usually caused by the printer being out of alignment, or because the need cleaned ink cartridges. The document below should help you to work on the problem. If the steps that do not work, replace the cartridges. If the problem persists, you will need to replace the printer.

  http://goo.GL/6GCRE

• Add items to arrylist from the end of the list

  Is it possible to create a new arraylist with, say, 1000 int cap and start adding items from the end?
  That is to say:
  
  myList.add (999, "xyz");
  myList.add (998, "blah");
  myList.add (997, "foo");
  etc...
  
  When I try to do, I get out of the exception of limits because the size of the arraylist is always 0...
  
  Thank you

  No, you will need to complete the list with dummy values first

• TIME REMAINING IN SECONDS FROM THE END OF THE MONTH

  Dear all,

  How to calculate the time remaining is seconds to the end of the month?

  time difference in seconds of sysdate to the last day of the month till 23:59:59

  Thanks in advance

  Hello

  SELECT (ADD_MONTHS (TRUNC (SYSDATE, 'MONTH')

  1

  )

  -SYSDATE

  ) * 24 * 60 * 60 AS seconds_left

  DOUBLE;

  SYSDATE is the date and time.

  TRUNC (SYSDATE, 'MONTH') is the beginning of the current month

  ADD_MONTHS (TRUNC (SYSDATE, 'MONTH'), 1) is the beginning of the next month

  ADD_MONTHS (TRUNC (SYSDATE, 'MONTH'), 1)-SYSDATE is the number of days (not necessarily an integer) by the end of the month

  (ADD_MONTHS (TRUNC (SYSDATE, 'MONTH'), 1)-SYSDATE) * 24 is the number of hours (not necessarily an integer) by the end of the month

  ...

• How to get lines with English letters at the end of race

  Hi all
  
  Examples of data include:
  

  create table test_app(application_no number, net_code number,branch varchar2(40));
  
  insert into test_app values(1001,01,'operations')
  insert into test_app values(1001,02,'production');
  insert into test_app values(1001,03,'testing')
  insert into test_app values(1002,01,'power coding');
  insert into test_app values(1002,02,'testing')
  insert into test_app values(1002,03,'export');
  insert into test_app values(1002,03,'operations');

  SQL> select*from test_app
    2  where application_no=1001;
  
  APPLICATION_NO   NET_CODE BRANCH
  -------------- ---------- -----------
            1001          1 operations
            1001          2 production
            1001          3 testing

    1  select*from test_app
    2* where application_no=1002
  SQL> 
  
  APPLICATION_NO   NET_CODE BRANCH
  -------------- ---------- --------------
            1002          1 power coding
            1002          2 testing
            1002          3 export
            1002          3 operations

  But my real need is delivered as follows:
  
  If an application having more then a result lines then
  I must add A, B, C, D... up to the total number of rows in the result set.
  Surely it will not exceed more then 26 ranks (will not exceed 'Z');
  
  
  
  the result should is:
  
  ask any = 1001
  
  DIRECTORATE GENERAL OF THE NET_CODE OF THE APPLICATION_NO
  -------------- ---------- -----------
  1001 operations 1
  2-1001 production_A
  1001 3 testing_B
  
  
  ask any = 1002
  
  
  DIRECTORATE GENERAL OF THE NET_CODE OF THE APPLICATION_NO
  -------------- ---------- --------------
  1002 1 power coding
  1002 2 testing_A
  3 1002 export_B
  3 1002 operations_C
  
  If we have 10 lines to the appication = 1002;
  
  
  
  DIRECTORATE GENERAL OF THE NET_CODE OF THE APPLICATION_NO
  -------------- ---------- --------------
  1002 1 power coding
  1002 2 testing_A
  3 1002 export_B
  3 1002 operations_C
  .... ..........._I
  
  Note: first line should add with no letters. Add letters with the second row.
  
  How to achieve this result. Please help me...
  
  Published by: roots on 6 March 2012 09:14

  select  application_no,
          net_code,
          branch ||
          case
            when row_number() over(partition by application_no order by net_code,branch) > 1
              then '_' || chr(ascii('A') + row_number() over(partition by application_no order by net_code,branch) - 2)
          end branch
    from  test_app
    order by application_no,
             net_code,
             branch
  /
  
  APPLICATION_NO   NET_CODE BRANCH
  -------------- ---------- -----------------
            1001          1 operations
            1001          2 production_A
            1001          3 testing_B
            1002          1 power coding
            1002          2 testing_A
            1002          3 export_B
            1002          3 operations_C
  
  7 rows selected.
  
  SQL> 
  

  SY.

• Sent by second Outlook identity received from the main identity

  Hello Mozilla Community,

  I use Thunderbird 31.8 (1:31.8.0 + build1 - 0ubuntu0.14.04.1) on 64-bit Linux Mint 17.2 and I'm trying to set up a second identity for my Outlook account.

  I have two identities configured as an alias in Outlook, and I used both via the web client for a long time. I have the account set up in Thunderbird (IMAP, SMTP) with the main identity works very well.

  Now, I'm trying to configure the alias second in Outlook as identities in Thunderbird just to send email from the identity of the second. I configured the second identity with a name and the same email address that I have as an alias in Outlook, leaving the other default options (because they are ok for me).

  I did several tests, send emails from two identities to a gmail account that I have (and it is also configured in Thunderbird). The main identity works well but the e-mail sent by the second identity is received on the account of gmail from the main identity.

  I looked in the folder "Sent" to the Outlook account (in Thunderbird) and there are 2 emails saved for each test with the second identity: the one that says it's main identity and another who says he is the identity of the second.

  Any help would be appreciated.

  P.S.: I have sought the support of Mozilla and also google about it, without success.

  Outlook identities DO NOT WORK WITH E-MAIL CLIENTS. It's all e-mail clients, just bot Thunderbird

  Initially, I wrote an article in the knowledge base on the subject (which I need to change seriously now, I guess...) Could I interest you in this Toad?)

  No matter what you set up in your e-mail client, Outlook will converted as it passes through the SMTP server of your primary identity. They are unashamedly on the subject and claim it as a kind of safety device. But Microsoft were claiming bugs as features since the mid-1980s

• How to align brushes to race on the path from the end of a path?

  Hello

  I came a way with no fill and a stroke. I copied this path in place and made a "brush-arrow" as you can see in the image below.  This allows me to get a look which tables my tip of arrow through the entire path.  My problem is that when I started the path (not view in image), the brush applies the first brush 'tip of arrow"(that I created) at the beginning of my career.  As you can see, the end of the path seems not so nice because the arrowhead brush ends not uniformly based on the different distances from each path. I wish that my ways end by an arrowhead, while still having that look "table."

  
  

  In simple terms, is there a way that I can dictate what my way (end point or starting point) end my brush "tip of arrow" starts from?

  
  

  Thank you very much
  

  

  To add to Mike's suggestions, here are a few ideas:

  • Save your appearance as a 'Style' for easy reuse.
  • A 'Brush of Art' to assign an arrow end of your line (see the screen image). This can be a more direct way to make sure that the arrows on the table matches the arrow on the end.
  • By assigning "shades" brush "colorization method", you can assign any color to every aspect of the race.

  

• Printer will be only woek when I disconnect from the Internet

  Original title: I have a HP Deskjet 3050 a J611 printer all-in-one. Wireless also. I had plugged in my computer on another wireless service, but since I changed it does not connect to the online services service

  I have a HP Deskjet 3050 a J611 printer all-in-one. I had plugged in my computer that was on an internet service. I changed my service and now the printer

  join the network only when I unplug the printer from the internet and click on connect to the printer?

  E-mail address is removed from the privacy *.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Sound like a hardware issue-setting up the printer using the HP installation methods.

  HP - DeskJet 3050 a - Product Support and troubleshooting<- set="" to="" your="">
  http://WWW8.HP.com/us/en/support-drivers.html

  HP - DeskJet 3050 a - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5061082&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers<- search="" driver="" for="" your="" model="" and="" then="" put="" in="" windows="">
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ======================================================

  The main issue is probably hardware or drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Second slot memory broken from the factory?

  I have a HP Pavilion m6-1000eo.

  My problem is when I try to add more memory that it just snaps into the second slot. I tried with a memory of my old mac and to be sure that it is not the memory that does not fit I also tried to put in the memory supplied with the computer at the secondary location. The original mem. organic pollutants persistent and at the main location with a team, but it does not work in high school.

  I suspect it's something wrong with the comp. from the factory since it's as if something is in the path of memory, so it cannot slide at bottom. I hope that you can see if this is the case in the pic.

  Thank you!

  Hello

  I don't see anything bad about the picture. You have to push the module with more pace sometimes, but be careful. Perhaps a picture angle toward the slot can bring up more.

• writing from the end of the file - FileConnection or PrintOutPutStream

  Hi all
  Im a new developer of blackberry and I were assigned to make a newspaper for the app I'm working on. The newspaper is supposed to be written to a file, but whenever the application is run, the new content is not meant to replace the old.
  The thing is that I have not found an outputStream or a method that allows me to move the cursor to the end of the file, so I can start writing something new without crushing the old.
  So two questions in one:
  If I said:
  fileCon = (FileConnection) Connector.open (_filePath, Connector.WRITE);
  Fact writing status measures me which the OutPutStream I get from fileCon.openDataOutputStream (); will have his slider at the end of the file?

  If this is not the case, can you please tell me if there is a way to do this?
  Thanks in advance
  Claudio Veas

  To add to a file, open the outputStream with a parameter that specifies the length of the file. This will put the cursor at the end of the file.

  Somethng lik this:

  FC = (FileConnection) Connector.open (fn);
  If (! fc.exists ())
  FC. Create();
  int size = (int) fc.fileSize ();
  OutputStream os = null;
  If (size > 0)
  OS = fc.openOutputStream (fileSize);
  on the other
  OS = fc.openOutputStream ();
  Return (OS);

  Rab

• Firefox showing only 300 pixels or so from the swf file?

  What would make Firefox appear only the first 300 pixels or so from the swf file? Everything works fine it just cover the lower part of the film? Doesn't do this on IE or Safari.

  Found is the value of 100% of the height. 100% for width, but not the height was not serious

• Can you take screenshot without permission from the end-user? Help, please!

  Hello

  I recently submitted an approved application that is available in the app world. Screenshots takes in the game to make animations faster. The question is, in order to take screenshots, you must use a secure api and not the end-user give "permission" for the app to 'save '. End users are reluctant to 'accept' because they think private information are used, etc...

  Question: is there a way to make a capture of screen-app without the user 'approve' record? OR should I just, but a little warning at the beginning saying... "the following approval is needed to make the application faster, but no private info is obtained, etc."

  Thanks for your help and time!

  Unless they received him in their default permissions, you need to ask.

• Update only last guest at patchlevel from the line command without VUM

  Hello

  I need to patch a single host of GA ESXi 5.5.0 to its latest patchlevel from the command line.

  (I have no avaiable VUM)

  below is shown the real patchlevel:

  VMware-l

  VMware ESXi 5.5.0 GA

  VMware - v

  VMware ESXi 5.5.0 build-1331820

  I do not know what file to download from vmware.com site

  Kind regards

  Roland

  To upgrade to the latest 5.5 profile directly from the software library of VMware image (requires internet access for the host) follow these steps:

  # esxcli network firewall ruleset defined true httpClient - r EI

  Profile software # esxcli d https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/vmw-depot-index.xml Pei ESXi 5.5.0 - 20151004001-standard update

  If your ESXi host has no direct access to the internet, then download the ESXi 5.5 updated 3A offline beam from here and upload it to the host:

  https://my.VMware.com/group/VMware/details?downloadGroup=ESXI55U3&ProductID=353&rPId=9553

  Then apply the patch with:

  # esxcli software update d vib "/ full/path/to/offline/bundle.zip".

  See also:

  VMware KB: Installation of patches on an ESXi 5.x/6.x host from the command line

  Both methods updates every ESXi host package to the latest version.

• Auto-fill form fields based on the input from the end user?

  I am currently trying to create a new form that has a combo box 'Locations' with various options.  What I want to do, is to have another car to text field to fill out other fields associated with this location (for example, address, contact information) to save on time and reduce the possibility for the end user input errors.

  What are my options to accomplish such a task?  A form of bonding in the fields with a database of MS maybe?

  Thanks in advance for all advice and assistance on this subject!

  I created a sample for you... are a look and let me know if this is the case for you.

  Paul

• Problems with the missing letters when the combination of Microsoft Word documents

  Hello

  I had a problem which I hope someone can help me with.

  When I combine several documents (9 total, .doc and .pdf files), some words have letters missing - leaving large voids in the words. It seems that, it seems to happen to positions with the font style "Arial (topics)."

  After some research, I realized that others have seen a similar problem and it could be solved in the Adobe PDF printer properties (properties > Preferences > defaults :).) However, after testing a few different settings, nothing seems to be fixing the issue and I will always have the same missing letters in the final document to convert.

  I use Adobe Pro XI - I was wondering if there is a update/fixes for this? I'm on version 11.0.07. For some reason, I am unable to update so I can't verify this.

  Can someone offer any assistance with this?

  Thank you

  This occurs due to the creation of subsets of fonts. Not all letters are available because they may be in subsets of different fonts. Delete the fonts embedded in the pdf file, then re - incorporate fonts.