Opdatering therefore "Win.exe" ikke efter

Similar Questions

• Windows Vista Edition Family Premium WIN.exe?

  Recently I went to log-in to my account on this computer, and a CMD box came with this huge list and the coding of this directory:

  'C:\Windows\System32\install\WIN.exe '.

  I have never seen this before from today. Here is a screenshot of what I got from him: bit.ly/System32Win

  What would be of fact this CMD appear suddenly? And how do I get rid of him without ruining my computer anyway, if possible?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Check if the problem persists in Mode without failure.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on link http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

• Photoshop elements 13 therefore ikke on Windows 10

  Efter opgradering fra Windows 7 Windows 10 therefore 13 til ikke laengere elements. NAR jeg Starter prioriterede far jeg 'organizer elements 13 er op holdt at fungere med' fejlbeskeden, og at Windows ned does.

  Afinstallation og geninstallation (fra DVD) har ikke gjort nogen forskel.

  JEG ikke ved, om det er and licensproblem eller and 10-Windows problem. Men prioriterede har aldrig lang installeret pa andre computere.

  Det ser ud til, at problemet stammer fra will C++ windows-programlearning. Efter to have Lee under repair (via Fjern eller programmer write) pa debt:

  Microsoft Visual C++ 2012 (x 64) Redistributable

  Synes problemet to limit lagt.

• I can't create an exe Mac and Win of headlamp Flash CC (?)

  Hello

  I use Flash Professional CC and I would like to create a projection file or / and a Win exe with my animation film...
  But I don't see anywhere to create these files in "Publication settings" (without box Mac or Windows to check as in CS5). I read using Flash CC that these records were not supported (?). How can I do?

  It's urgent thanks.

  http://nipunasthana.WordPress.com/projectorforflashcc/

• When I try to open a program that I have loaded on my computer I get a message; attempt to access an invalid address and win exec fail = 487

  I can't open a program named "instant Stitch. The computer says that it is not a program win. The program is supposed to work on windows. Other messages are, try to access the invalid programs, and win exe fail = 487

  Hi lostonline

  1 - is the first time that you try to open the program Windows XP?

  2. did you of recent changes on the computer?

  3 - is an MS-DOS program?

  Method 1

  I suggest that you try to open the program by using the program compatibility Wizard and check if it works.

  How to use the program compatibility Wizard in Windows XP

  http://support.Microsoft.com/kb/301911

  Method 2

  If the previous step fails, then you can uninstall and reinstall the game, check if it works.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• Flash drive keeps in error.

  I have a 64-bit windows 7. I use firefox 24, flash player 11.9.900.117. whenever I try to load a page (like facebook) which implies the flash drive, I am able to watch videos, but I repeatedly to get the error message:

  FlashPlayerPlugin_11_9_900_117.exe - Application error

  The exception unknown software exception (0xc0000710) occurred in the application at location 0x7794a389.
  Click on OK to terminate the program.

  I can't even mouse over the box containing this error. It's quite annoying and quite frequent. I checked and my flash plugin for firefox is updated and not disabled. Please answer all relevant information.

  This error on Firefox 24 due to 11.9 FlashPlayer. The latest version of Flash is perhaps not compatible with Firefox 24. So we'll just have to wait for Adobe with arrival upward with an update. You can read this post that shows how to fix this error step by step with screenshots - How to fix error of Plugin Flash in Firefox 24 0xc0000710

  1. Uninstall Flash Plugin 11 from Add/Remove programs
  2. Download Flash Plugin 11.8 (156.2 MB) file http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html scroll to the bottom of the page to find the list.
  3. Once the file is downloaded, run the file win.exe
  4. Open Firefox again and the popup should be gone.

• Satellite L300D-01N - BIOS version original need

  Hello

  had a bad bios flash when you try to apply PSLC8-PSLE8-180 - WIN.exe (Ver 1.80, 10/27/2009) updated the bios of my Satellite L300D-01N, model # PSLC8C-01N019

  now, the unit does not come on at all - I'm trying to restore it to work but it is impossible to find a copy of the bios file updated (from the active windows self-extracting program Toshiba update bios) during installation
  (I tried to extract it on another pc that the portable original is a brick now but still no luck)

  I was able to confirm that I can get the system to the laptop using the CRC, but I need a copy of the * original * BIOS that came with these units so I can reflash.
  does anyone have a copy of the original bios this device before you apply this update (ver. 1.8 2009-10-27)?

  Please note that I was not myself tried this update of the BIOS, so I don't have a copy of the original anywhere.

  Can you send me a copy please?

  Thnaks a lot

  Hi lostboy77,

  BIOS reflash is possible only to an authorized service. If the BIOS update has filed, you can do nothing. :(

  I know it's hard to hear, but you must understand that the update of the BIOS is always somewhat risky and if it wasn t flashed correctly, your laptop won't boot any more. So it of not so easy a Windows Update

  Anyway, here you can get a quick and professional help:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• dmAPP_SetMetaTag

  For my Windows XP Professional SP3, how can I bypass this message "the procedure entry point not found dmAPP_SetMetaTag in the dynamic link library dmBackup.dll." I get this message when I try to use my SanDisk USB key.

  The dll or dynamic link libraries are collections of procedures, each being identified by its individual enrty point. Different versions of the same dll name may have different procedures, and appointed entry points different even for the same procedures.

  The dmBackup.dll is associated with the program of SecureAccess SanDisk (RunSanDiskSecureAccess - Win.exe). It is known to produce false positives of anti-virus software, and maybe that's your problem. She also can't have updated if you updated your SecureAccess program through an online update service.
  SecureAccess uninstall and re-install the latest version, you can find. I have provided a link to a copy on the site of Support of SanDisk below. Run your antivirus software and identify the dmBackup.dll as being safe.
  SanDisk SecureAccess support information and download page
  SanDisk Supprt - dmBackup.dll

• what takes my space in my computer?

  I have defraged and used disk clean but have always no more room! I have 114 g' low s.i. load a lot of movies but I deleted more then half but I have STILL no more space left .i have even deleted the old files... I don't know what could occupy all my space, help please!

  If you use this amount of space on a Windows XP computer - it is * your * stuff taking up by.  Windows XP with * sorts * installed applications take about 10 GB of space - usually not much more.  The 'all kinds of applications' would include office suites, graphics suites, video editing suites, etc.  Is more likely, whatever it is above the mark of ~ 10 GB * your * stuff.

  How much space is your hard disk have TOTAL and FREE now?

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
  (These instructions will be different depending on the version of IE that run you.)

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.

  Some people have had difficulties getting installed JDiskReport / work - so a bit more about it here:

  JDiskReport requires Java work.  Here are the steps I would take to get it installed.

  • Download the latest version of Java Runtime Environment: JRE 6 Update 26
  
  (Save it somewhere obvious and easy to find - such as your desktop).
  (The name of the file is jre-6u26-windows-i586 - s.exe.)
• Download and save the latest JDiskReport: JDiskReport R1.3.2
  (Save it somewhere obvious and easy to find - such as your desktop).
  (The file name will be jdiskreport-1_3_2 - win.exe.)
• Restart your computer and log in.
• Double-click the file jre-6u26-windows-i586 - s.exe (Java).  (Installation, (Yes if requested), fence, etc.)
• Once it's done installing, restart your computer and log in.
• Double-click on the jdiskreport-1_3_2 - win.exe (JDiskReport).  (Next, Next, Install, finish, close the Readme If it opens.)
• Once it's done installing, restart your computer and log in.

Run from the shortcut on your desktop.

• Problem with the installation of Playbook Simulator program

  I get the following error message in the VMware Player when trying to install the Playbook Simulator on my Windows XP computer.

  What is the reference for this? I have to re-download the BlackBerryPlayBookSimulator-Installer - 0.9.2 - Win.exe file and start from scratch?

  ERROR MESSAGE:

  Loading of the neutrinos...

  WARNING: The contents of/dev/hd0 is permanently deleted!

  You want to continue with the installation?

  [UI Y] or [N]? --> Y

  Partitioning/dev/hd0...

  Install images... This may take a few minutes

  [33% 1 M/s ETA:04:55 s: #]

  bzcat: error during decompression data integrity.

  Input file = / cd/hd0t179, output file = (stdout)

  It is possible that the compressed file has been corrupted.

  You can use the option - tvv to test the integrity of these files.

  You can use the program "bzip2recover" to try to recover

  data from the sections not damaged damaged files.

  mkqnx6fs: not a fs-qnx6 filesystem ' / dev/hd0t179 ".

  Operation finished, file synchronization and shutdown system

  Please remove the installation media

  Press to restart.

  Hey tony,.

  your best bet will probably be to re - download, extract and install again. How much space you set the virtual disk have? Try the 8 GB configuration and see if that helps the next installation. Good luck!

• who is on my hard drive? How can I tell what to delete?

  For a long time, I had used very little space on my hard drive. For some reason any during the last two weeks my unused space becomes much smaller. I'm a fool to the computer and I have a hard time with the computer language. I'm ready to destroy my computer. I tried clean up options and other disks, without success. Is there someone, or a site that I can trust to help me remotely? I don't know what's on my drive hard and what I should or should not delete. Any suggestions would be very helpful.

  Thank you. I downloaded the link, ran the scan, I was told that I had many errors. Was invited to buy the product to clean up the errors.

  You clicked on the wrong link somewhere (and you were correct to pay for repair which are likely false errors).  TreeSize is not a malware scanner.

  Try rather JDiskReport .  It is also free, does not include the extra stuff, and provides a nice graphical output.  The only problem is that it requires that you have Java installed, but most people already have Java.  You can download and install JDiskReport (click the link for jdiskreport-1_4_0 - win.exe) or click on the link for "Web Start JDiskReport" to execute it immediately.

  [EDIT]
  I didn't try TreeSize and I wanted to see if it has automatically installed a scanner (it is not).  What I noticed, however, the size of the files reported with TreeSize, JDiskReport are not the same, with generic TreeSize, including more files - but no requests doesn't bring the same space as Windows does.  However, or the other of these two applications should give a pretty good approximation where you need to look to reclaim the disk space.

• Download Adobe ColdFusion 16 (broken link, error)

  Hello

  I'm trying to download the path for Adobe ColdFusion 16, but when I fill the version information I want to download (32-bit |) English) I get this broken link error.

  It is said to send an email to report a broken link, but there is none available to use for contact Support.

  

  I suspect that something on your side could block the download.

  Please use the links below to download the installer directly.

  64-bit Windows:

  FTP://Cust-DL:[email protected]/ColdFusionInstallers/CF2016/ColdFusion_2016_WWEJ _ win64.exe

  32-bit Windows:

  FTP://Cust-DL:[email protected]/ColdFusionInstallers/CF2016/ColdFusion_2016_WWEJ _ win.exe

• rac 11g laptop Guide

  a result of this:

  http://www.lab128.com/rac_installation_using_vb/article_text.html

  I need to go to MOS to 11.2.0.3. I have an account through work, but everything I do at work is followed in a VPN. We do not use RAC. Im doing some self study at home to keep my skills up to date. My managers will be not like that Im downloaded from Oracle support doing self-study. Doing so on my PC. Connecting MOS of my personal PC could make me a lot of bad too. IM in a secure environment, so everything is monitored. I would like to make a few than auto home study.

  If Im trying to track this using 11.2.0.1. doesn't look like:

  does not resemble the preinstallation is sufficient to work with 11.2.0.1: yum install oracle-RDBMS-server-11 GR 2-preinstall

  [RPM root@new-host] # rpm - Uvh cvuqdisk - 1.0.7 - 1.rpm

  error: failed dependencies:

  libc.so.6 () (64-bit) is needed by 1.0.7 - cvuqdisk - 1.x86_64

  libc.so.6 (glibc_2.2.5)(64bit) is needed by 1.0.7 - cvuqdisk - 1.x86_64

  Been hunting everywhere for libc.so.6, I went to the Conference on disarmament. A search of google. I can re-create the VM and do a full install and check all the boxes. I have a lot of hard disk space. Using a 1 TB hard drive. However, before that I do this, does anyone know this package that I need to install to get it?

  Is there any laptop guides CARS that work with 11.2.0.1?

  These are the versions, Im using:

  -rwxrwx - 1 root nome_cartella_condivisa 106404624 1 Dec 15:20 VirtualBox - 4.3.4 - 91027 - Win.exe

  -rwxrwx - 1 root nome_cartella_condivisa 1111416131 1 Dec 15:32 linux.x64_11gR2_database_2of2.zip

  -rwxrwx - 1 root nome_cartella_condivisa 1239269270 1 Dec 15:33 linux.x64_11gR2_database_1of2.zip

  -rwxrwx - 1 root nome_cartella_condivisa 3265177600 1 Dec 15:43 OracleLinux-R6-U5-Server-i386-dvd.iso

  -rwxrwx - 1 root nome_cartella_condivisa 1052897657 1 Dec 18:17 linux.x64_11gR2_grid.zip

  11.2.0.1 is not certified with Linux 6.x - you will need a minimum of 11.2.0.3 - Oracle & reg; Database

  I suggest using Linux 5.9

  See also - attack RAC - Cluster database Oracle home - Wikibooks, open books for a world open

  HTH
  Srini

• Failed to load the JDBC driver class

  Hello

  I managed to install Flash Builder 4 (FlashBuilder_4_LS10.exe) with the plugin (Adobe_Application_Modeling_plugin_v102_eclipse35.zip) data model. On my local pc (XP Professional), I'm under tomcat with LS (lcds31 - win.exe). I can run all the samples, but when I try to add an oracle DB data service I receive
  ' Not found data source: java: / comp/env/jdbc/ORCL.
  "Could not load the"oracle.jdbc.driver.OracleDriver JDBC driver class.

  I copied ojdbc6.jar (I tried ojdbc5.jar as well, but without success) in the C:\lcds\tomcat\webapps\lcds-samples\WEB-INF\lib directory. I also uncommented RDS servlet in C:\lcds\tomcat\webapps\lcds-samples\WEB-INF\web.xml and changed useAppserverSecurity to false. Finally, I added the following to C:\lcds\tomcat\conf\Catalina\localhost\lcds-samples.xml:

  < resource name = "jdbc/PUF" type = "javax.sql.DataSource"
  driverClassName = "oracle.jdbc.driver.OracleDriver"
  maxIdle = "2" maxWait = "5000".
  URL="JDBC:Oracle:thin:@oradbsrv:1521:ORCL" username = "atest" password = "aaa123" maxActive "4" =
  / >

  Any idea what I might be missing or hurt?

  Thank you
  Julius

  I have an Oracle data source running in LCDS31 of screens LCD liquid samples.  I have my Oracle driver in tomcat/lib not WEB-INF/lib.  I connect to an Oracle 10.2 server.  I am also under the odbc14.jar

  I would like to start by moving your tomcat/lib driver.  First try ojdbc5.jar.  I think I went to ojdbc14 because latest drivers did not work.

• installation of coldfusion on tomcat 5.5

  Hello
  I'm doing a project involving coldfusion and j2ee (what a good idea, btw?), and I met some problems on installation of coldfusion.
  
  I installed apache (tested and works well with a j2ee project), jdk 1.5.0.6 - tested with a few projects and works very well and a plugin for eclipse (cfeclipse I think)
  then I installed "coldfusion-702 - win.exe" (downloaded from macromedia, developer version - it says it is supposed to work with j2ee).
  
  the installer has 2 directories: CFusionMX7 and ColdFusionSearchService. in the first, there are "cfusion.war" file that I copied in the directory webapps of tomcat (as well as the "CFIDE.war" file).
  
  then I started the apache server and it created (;)) apart a couple of directories in the webapps directory: CFIDE and cfusion (which contain more files and subdirectories))
  
  Next, I created the file "setenv.bat", by following the instructions on this site (which contains the paths to the directories in coldfusion, access roads written here all corect) and place in the directory 'bin' of tomcat (next to the file "tomcat5.exe"). restarted the server, etc etc.
  (set JAVA_HOME = C:\Program Files\Java\jdk1.5.0_06\
  Set CF_HOME = C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\cfusion\
  put CF_WEB_INF=%CF_HOME%/WEB-INF) etc...
  
  My question is: what should I do next to make it work? :)
  
  I started tomcat and I tried typing " http://127.0.0.1:8080/cfusion/CFIDE/administrator / ", but I get the "Cannot display page" error
  Help.

  Nevermind, I got it.
  the tutorial on the macromedia site is outdated. This is were you can find correct information:
  http://www.librarywebchic.NET/WordPress/2005/11/18/Tomcat-and-ColdFusion/