Installation of the connector AD gives error

Similar Questions

• NetApp Installation of the adapter - only gives error there is no component AliveServer installed.

  When you run the installation of the adapter for netapp, I get the following error message

  "There is no installed components of AliveServer. .

  Installation will be revoked. »

  Is there something that I am missing for this facility?

  What vC Ops version are you running? VAPP or standalone?

  Is it an upgraded environment? Your environment variables can be tempered a bad upgrade... I have seen sometimes when go you and can not run. / psql as a symptom when you / console SSH in and run, knew postgres, then. / psql could not be found... among other things.

• Error message during the installation of the sound card: an error occurred during the installation of the device__ "e/s operation was abandoned because of a thread exit or an application request." _

  Hello
  I can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:
  There was a problem installing this hardware:
   
  An error occurred during the installation of the device
  "The IO operation has been abandoned due to a thread exit or an application request."
  The driver worked fine on this computer until a month ago. I think it's more a problem of Windows installation as a driver issue, but I do not know where to go from here. Any suggestions?
  Thank you
  I tried to install the sound card on different PCI expansion slots. I get the same message trying to install a USB sound card. The sound properties in the control panel are classified outside (non-active)

  Hello Smachbub,

  Thank you for your message.  Let's try one or two different things.  Please follow step by step.
  1. we will try to completely remove the previous sound card driver, then reinstall.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Click the (+) sign next to "sound, video and game controllers".
  Below, you should see your audio card, right click and select "Properties".
  Select the 'Drivers' tab and click 'uninstall '.
  After uninstalling the driver, reboot and go to your computer manufacture or website of the manufacturer of the sound card and download/install the latest driver for your device.
  If problems persist, try this same process as a new profile.
  2. to create a new profile:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > select 'users '.
  In the right pane, right click and select 'add a new user '.
  Fill in the appropriate information, and then select 'create '.
  The new user must be added, right click on the new user and select "Properties".
  Select the tab "member of ' and click on 'Add '.
  Type Administrators and click on "check names".
  Once the name is entered correctly, click 'OK '.
  Log off your computer and connect with the new credentials.  Then try removing and reinstalling the driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Windows Vista SP2x86 gives error 80004005

  I use a older laptop for the first time in a while. It works in Vista, but I have never updated to SP1 to SP2. When I try, I get this:

  Installation status: failed
  Error details: Code 80004005
  Update type: Important
  So after flipping around for a bit, I finally had a solution that seemed a little helpful to someone on some forums. They told me to run the system preparation tool and check what errors there were, and then from there I just needed to correct mistakes.  The only problem is that I have no idea how fix the errors. What I get is:
  Preparation of control system was updated.

  Version 6.0.6001.22275

  2012-07-30 07:31

  (f) CheckSUR registry failure 0 x 00000005 unable to erase the tag registry CBS.

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.

  Verification of the packets.

  Control components store

  Checking SMI Store

  (f) registry key for lack of SMI \metadata\securityDefinitions wcm://Microsoft-Windows-Disable-Autorun-KB971029?version=6.0.6001.18287&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers 0 x 00000000

  Summary:

  Milliseconds: 2481270

  Found 2 errors

  CheckSUR registry failure Total Count: 1

  SMI missing Registry Key Total Count: 1
  I don't know exactly how to fix either of these two problems. When I asked again on the forum, I've never had all the answers, so I decided that I would try to ask here. In addition, this in fact will help me update of Vista? If it's a mistake, I want to fix, but if it is not relevant to the problem with the update, then I would get an answer to this, also.

  Hello

  
  This problem is specific to the Service pack update? You are able to install some other updates?
  
  Method 1
  When you install SP2 to Vista, Vista SP2 Setup must update the system startup files. If the third-party disk management tools are used to "clone" disks or partitions, the SP2 Setup program will be unable to identify the correct system startup files.
  To work around this problem, turn off the computer and physically disconnect all the readers who are not required to start Windows. Turn on the computer, and then restart the installation of the service pack.
  For more information, see the article:
  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
  http://support.Microsoft.com/kb/971204/
   
  Method 2
  I suggest that you put the computer in a clean boot state and try t install the update.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
   
  Method 3
  Try to install the service pack from the link and let us know the status of the issue.
  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468
   
  Check out the link:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  
  http://support.Microsoft.com/kb/947366
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
   
  Let us know the status of the issue.

• Installation of the connector

  Hello
  I need to install UNIX on IOM 9.1.0.2 connector but do not using the connector Installer.
  I know that the pots of installation media must be copied into the appropriate folders as indicated but I don't know how to import XMLs
  
  Is there a sequence should I follow. If there is, how can I find out about it. Please advice.
  
  Thank you.
  
  Published by: user13015045 on August 26, 2011 12:09

  N ° there is no defined order. You can import in any order.

• The installation of the manufacturer DVD read error: "insert a disc.

  Running Vista Business SP2 on an Athlon 3700 + I can't open a couple with my internal drive DDL Memorex 16 x DVD of installation of the manufacturer. I can read/burn discs, I burned and play movies. I tried to uninstall the driver and the removal of the upper and lower classes in the registry. I have attached an old DVD external firewire Sony and it will read the discs and the autorun on their part very well. I also ran a virus with Avast check last night. I have Roxio Creator 2010 and WinDVD 2010 installed but I don't think they are the problem other that change the AutoPlay on movies of Cineplayer.  I spent several hours on this and am puzzled. Someone has an idea it might be?

  Oh yes, I also ran Microsoft auto repair program and when he got to the point where you select the disks to run additional tests he selects the drive "D:" problem Then he spits the disc by the manufacturer and says "insert a disc.

  The drive laser is defective with the specific media type.

  Either buy a new or replacement under warranty request if it is in warranty period.

  S.Chatterjee

• P2V defective after installation of the Converter Agent, unknown error produced to the customer

  Hello! I need help with that on:

  vSphere Client 4.0.0 build 208111

  vCenter Server 4.0.0 build 208111

  Host ESX 4.0.0 build 261974

  Company agent Converter 4.1.1 build 20617

  Source of Windows Server 2003 SP1 x 86-HP ProLiant ML370 std

  Trying to P2V using "Import Machine" vcenter. After that the converter Agent is installed, the Import Wizard displays an error: unknown error produced to the customer. After you click OK. The VI client ends.

  The source servers and ESX host are on a place other than the vCenter, but on the 'same' network. Other P2V in the same place are passed without problem.

  VMware converter - client.log:

  Journal for VMware Converter Enterprise Client, pid = 4408, version = version 4.1.1 = build-206170, option = release, section = 2

  Current working directory: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Plugins\Converter Enterprise 4.1.1

  HOSTINFO: See Intel CPU, numCoresPerCPU 2, numThreadsPerCore 1.

  HOSTINFO: This machine has 1 physical CPU, 2 total hearts and 2 logical processors.

  Recorder P2V created

  Initialize SSL

  Using the libcrypto, version 9070CF

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  Created SSL context

  AppInit finished

  Start of the execution of a task

  By ensuring that this interface UFAD version vmware converter - 4.1.1

  SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. 172.25.17.19

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • Used to connect host name does not match name the object on the certificate of the host

  • A certificate of the host string comes from an untrusted root.

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  UFAD interface version is vmware-converter - 4.1.1

  Execution completed the task

  Start of the execution of a task

  SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. osl1019

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • Used to connect host name does not match name the object on the certificate of the host

  • A certificate of the host string comes from an untrusted root.

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  Connecting to host osl1019 on port 443 using the https protocol

  SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. osl1019

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • Used to connect host name does not match name the object on the certificate of the host

  • A certificate of the host string comes from an untrusted root.

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  Execution completed the task

  Start of the execution of a task

  Connection to IPC$ on 172.20.2.10 as domain\user1

  Manager of SMB: host has already had a different share mapped with conflicting credentials.  Could not map share http://\\172.20.2.10\IPC$.

  Task failed: P2VError REMOTE_UFA_CREDENTIAL_CONFLICT_ERROR (172.20.2.10)

  Start of the execution of a task

  Connection to IPC$ on 172.20.2.10 as domain\user1

  Successfully connected to IPC$ on 172.20.2.10

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Unable to connect to
  172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

  From vmware-converter on 172.20.2.10

  Could not open service handle to with 983103:1060 level access

  Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

  Failed to start the vmware converter service

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Unable to connect to
  172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

  From vmware-converter on 172.20.2.10

  Could not open service handle to with 983103:1060 level access

  Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

  Failed to start the vmware converter service

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Unable to connect to
  172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

  From vmware-converter on 172.20.2.10

  Could not open service handle to with 983103:1060 level access

  Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

  Failed to start the vmware converter service

  Give up trying to connect to
  172.20.2.10\pipe\vmware-converter-VMDB

  Task failed: P2VError UFA_NOT_RUNNING()

  Installation UFAD hostname = 172.20.2.10, user name is domain\user, postponeReboot = 1

  Start of the execution of a task

  Connect to ADMIN$ on 172.20.2.10 as domain\user1

  Successfully connected to ADMIN$ on 172.20.2.10

  MakeSafeDirectory: directory exists, skip the security lock

  MakeSafeDirectory: directory exists, skip the security lock

  MakeSafeDirectory: directory exists, skip the security lock

  ہ service args: com.vmware.courier - vntixenubmcaveth

  Could not open service handle to with 983551:1060 level access

  Execution completed the task

  Start of the execution of a task

  Connection to IPC$ on 172.20.2.10 as domain\user1

  Successfully connected to IPC$ on 172.20.2.10

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Connected to the
  172.20.2.10\pipe\vmware-converter-VMDB

  Unknown path: /vmomi/

  Impossible task without error message

  VMware converter - agent.log:

  Journal for the VMware Converter Enterprise, pid = 1396, Agent version = 4.1.1 build = build-206170, option = release, section = 2

  Cannot create the writer console

  Current working directory: C:\Program VMware Converter Enterprise Agent

  HOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 1.

  HOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.

  TaskMax = 40, IoMin = 1, IoMax = 81

  Try ufa_agent

  Plugin path 0: ufa - agent.dll

  Absolute path of the plugin 0: C:\Program VMware Converter Enterprise Agent\ufa - agent.dll

  Initializing the SSL context

  Using the libcrypto, version 9070CF

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  Plugin initialized

  Try ufa_client

  Plugin path 1: ufa - client.dll

  Absolute path of the plugin 1: C:\Program VMware Converter Enterprise Agent\ufa - client.dll

  UfaClientPlugin Init

  Try ufa_slave

  Plugin path 2: ufa - slave.dll

  Absolute path of the plugin 2: C:\Program VMware Converter Enterprise Agent\ufa - slave.dll

  Microsoft Windows Server 2003,

  Standard Edition

  Service Pack 1 (Build 3790)

  UfaSlavePlugin Init

  Try ufa_sysMigration

  Plugin 3 path: ufa - sysmigration.dll

  Absolute path of the plugin 3: C:\Program VMware Converter Enterprise Agent\ufa - sysmigration.dll

  NFC connection accept timeout: 180000 milliseconds

  NFC request timeout: 180000 milliseconds

  NFC read timeout: 60000 milliseconds

  NFC write timeout: 600 000 milliseconds

  NFC connection accept timeout: 180000 milliseconds

  NFC request timeout: 180000 milliseconds

  NFC read timeout: 60000 milliseconds

  NFC write timeout: 600 000 milliseconds

  SysMigrationPlugin Init

  Try ufa_sysReconfig

  Plugin path 4: ufa - sysreconfig.dll

  Absolute path of the plugin 4: C:\Program VMware Converter Enterprise Agent\ufa - sysreconfig.dll

  SysReconfigPlugin Init

  The data store of reconfiguration of loading XML from C:\Program VMware Converter Enterprise Agent\reconfigurationDataStore.dat...

  ReconfigurationDataStore of filling...

  Action free of charge

  CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_1000 & dev_0030 patch: C_SYMMPI

  CurrentControlSetKey update of the register: Services\symmpi patch: S_SYMMPI

  Update the filePathInWinDir file: system32\drivers\symmpi.sys source: BASEOS sourceFileName: symmpi.sys

  Action BuslogicMylex of loading

  CurrentControlSetKey update of the register: enum\root\LEGACY_BUSLOGIC patch: L_BUSLOGIC

  CurrentControlSetKey update of the register: services\buslogic patch: S_BUSLOGIC

  Update the filePathInWinDir file: system32\drivers\buslogic.sys source: VMWARE_DRIVERS_CAB sourceFileName: buslogic_for_nt.sys

  Action Buslogic_vmscsi of loading

  CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_104b & dev_1040 patch: C_VMSCSI

  CurrentControlSetKey update of the register: Control\Class\ {4D36E97B-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_VMSCSI

  CurrentControlSetKey update of the register: Services\vmscsi patch: S_VMSCSI

  Update the filePathInWinDir file: system32\drivers\vmscsi.sys source: VMWARE_DRIVERS_CAB sourceFileName: vmscsi.sys

  Action Buslogic_vmscsi_ACPI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_104B & DEV_1040 & SUBSYS_1040104B & REV_01\3 & 61aaa01 & 0 & 80 patch: E_VMSCSI

  Action Buslogic_vmscsi_NotACPI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_104B & DEV_1040 & SUBSYS_1040104B & REV_01\2 & ebb567f & 0 & 80 patch: E_VMSCSI

  Action Enable_Lsi_Scsi_Driver of loading

  CurrentControlSetKey update of the register: Services\LSI_SCSI patch: S_LSI_SCSI

  Action Mouse_Keyboard_Common of loading

  Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0303 patch: C_PS2KBD

  CurrentControlSetKey update of the register: Control\Class\ {4D36E96B-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_PS2KBD

  Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0f13 patch: C_PS2MOUSE

  Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0f03 patch: C_PS2MOUSE

  CurrentControlSetKey update of the register: Control\Class\ {4D36E96F-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_PS2MOUSE

  Action Mouse_Keyboard_ISAPnP of loading

  CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_8086 & dev_7110 & cc_0601 patch: C_ISAPNP

  Action Mouse_Keyboard_ACPI of loading

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0303 patch: E_PS2KBD

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F13 patch: E_PS2MOUSE

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F03 patch: E_PS2MOUSE

  Action Mouse_Keyboard_ACPI_Vista of loading

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F13 patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F03 patch: SKUNKWORKS_FILLER

  Action Mouse_Keyboard_NotACPI of loading

  Update the registry currentControlSetKey: Enum\Root\ * PNP0F13 patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: Enum\Root\ * PNP0F03 patch: SKUNKWORKS_FILLER

  Action NT_SVGA_Registry_Updates of loading

  CurrentControlSetKey update of the register: enum\root\LEGACY_VMX_SVGA patch: E_VMX_SVGA

  CurrentControlSetKey update of the register: services\vmx_svga patch: S_VMX_SVGA

  Action Common_SVGA_Updates of loading

  CurrentControlSetKey update of the register: services\vmx_svga patch: S_VMX_SVGA

  CurrentControlSetKey update of the register: Control\Class\ {4D36E968-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_VMX_SVGA

  Update the filePathInWinDir file: INF\vmx_svga.inf source: VMWARE_DRIVERS_CAB sourceFileName: vmx_svga.inf

  Update the filePathInWinDir file: system32\vmx_fb.dll source: VMWARE_DRIVERS_CAB sourceFileName: vmx_fb.dll

  Update the filePathInWinDir file: system32\vmx_mode.dll source: VMWARE_DRIVERS_CAB sourceFileName: vmx_mode.dll

  Update the filePathInWinDir file: system32\drivers\vmx_svga.sys source: VMWARE_DRIVERS_CAB sourceFileName: vmx_svga.sys

  Action SVGA_Registry_Updates_APCI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00\3 & 61aaa01 & 0 & 78 patch: E_VMX_SVGA

  Action SVGA_Registry_Updates_NotACPI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00\2 & ebb567f & 0 & 78 patch: E_VMX_SVGA

  Action Restore_i8042_NT5 of loading

  CurrentControlSetKey update of the register: Services\i8042prt patch: SKUNKWORKS_S_I8042

  Update the filePathInWinDir file: system32\drivers\i8042prt.sys source: BASEOS sourceFileName: i8042prt.sys

  Action Deref_vpcsrvc of loading

  CurrentControlSetKey update of the register: Services\1-driver-vpcsrvc patch: SKUNKWORKS_FILLER

  Update the registry CurrentControlSetKey: Services\1-vpcsrvc patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: Enum\LEGACY_1-DRIVER-VPCSRVC patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: patch Enum\LEGACY_1-VPCSRVC: SKUNKWORKS_FILLER

  Action Deref_mrxvpc of loading

  CurrentControlSetKey update of the register: Services\MrxVPC patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_MRXVPC patch: SKUNKWORKS_FILLER

  Action Deref_vpcmap of loading

  CurrentControlSetKey update of the register: Services\VPCMap patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_VPCMAP patch: SKUNKWORKS_FILLER

  Deref_vpc-s3_NT4 of loading action

  CurrentControlSetKey update of the register: Services\vpc-s3 patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_VPC-S3 patch: SKUNKWORKS_FILLER

  Deref_vpc-s3_NT5 of loading action

  CurrentControlSetKey update of the register: Services\vpc-s3 patch: SKUNKWORKS_FILLER

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_5333 & DEV_8811 & SUBSYS_00000000 & REV_00\3 & 267a616a & 0 & 40 patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\s3legacy patch: SKUNKWORKS_FILLER

  Action Deref_vmsrvc of loading

  CurrentControlSetKey update of the register: Services\1-driver-vmsrvc patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: Enum\Root\LEGACY_1-DRIVER-VMSRVC patch: SKUNKWORKS_FILLER

  Update the registry CurrentControlSetKey: Services\1-vmsrvc patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: patch Enum\Root\LEGACY_1-VMSRVC: SKUNKWORKS_FILLER

  Action Deref_netfin of loading

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_NETFIN patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\NetFin patch: SKUNKWORKS_FILLER

  Action Deref_cpqdmi of loading

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_CPQDMI patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\CPQDMI patch: SKUNKWORKS_FILLER

  Action Deref_cpqalert of loading

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_CPQALERT patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\CPQALERT patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\EventLog\System\CPQALERT patch: SKUNKWORKS_FILLER

  Action Deref_cpqagent of loading

  CurrentControlSetKey update of the register: Services\EventLog\System\Snmp patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\Snmp patch: SKUNKWORKS_FILLER

  Action Deref_ipmi of loading

  CurrentControlSetKey update of the register: Services\IPMI patch: SKUNKWORKS_FILLER

  Action RemoveUnwantedKeys of loading

  CurrentControlSetKey update of the register: Services\VPCMap patch: SKUNKWORKS_FILLER

  Action FixSetupLog of loading

  String replace updated filePathInWinDir: repair\setup.log model:
  System32
  value of ntoskrnl.exe.*\.exe:
  System32
  Ntoskrnl.exe = "ntoskrnl.exe".

  String replace updated filePathInWinDir: repair\setup.log model:
  System32
  value of Hal.dll.*\.dll:
  System32
  HAL.dll = "hal.dll".

  Action DeleteInfCacheFile of loading

  FilePathInWinDir delete the file: inf\INFCACHE.1

  Definition of loading GenericWin2k364Bit

  Definition of loading GenericVista64Bit

  Definition of loading GenericWinXP64Bit

  Definition of loading GenericWin64Bit

  Definition of loading NotWin64Bit

  Definition of loading GenericVista

  Definition of loading GenericWinNT5

  Definition of loading GenericWin2k3

  Definition of loading GenericWinXP

  Definition of loading GenericWin2k

  Definition of loading GenericWinNT4

  Definition of loading NotWinNT4

  Definition of loading NotWinVista

  Loading ACPI expression definition

  Definition of loading NotACPI

  Loading definition expression MultiProc

  Definition of loading InstallSVGA

  Definition of loading MustUpdateCoreNTFiles

  Definition of loading BuslogicMylex

  Definition of loading Buslogic_vmscsi

  Loading reconfiguration FixSetupLog

  Action FixSetupLog for reconfiguration of loading

  Loading reconfiguration BuslogicMylex

  Action BuslogicMylex for reconfiguration of loading

  Loading free reconfiguration

  Reconfiguration of loading free action

  Loading reconfiguration Buslogic_vmscsi_ACPI

  Action Buslogic_vmscsi for reconfiguration of loading

  Action Buslogic_vmscsi_ACPI for reconfiguration of loading

  Loading reconfiguration Buslogic_vmscsi_NotACPI

  Action Buslogic_vmscsi for reconfiguration of loading

  Action Buslogic_vmscsi_NotACPI for reconfiguration of loading

  Loading reconfiguration Enable_Lsi_Scsi_Driver

  Action Enable_Lsi_Scsi_Driver for reconfiguration of loading

  Loading reconfiguration Mouse_Keyboard_ACPI

  Action Mouse_Keyboard_Common for reconfiguration of loading

  Action Mouse_Keyboard_ISAPnP for reconfiguration of loading

  Action Mouse_Keyboard_ACPI for reconfiguration of loading

  Loading reconfiguration Mouse_Keyboard_NotACPI

  Action Mouse_Keyboard_Common for reconfiguration of loading

  Action Mouse_Keyboard_ISAPnP for reconfiguration of loading

  Action Mouse_Keyboard_NotACPI for reconfiguration of loading

  Loading reconfiguration Mouse_Keyboard_ACPI_Vista

  Action Mouse_Keyboard_Common for reconfiguration of loading

  Action Mouse_Keyboard_ACPI_Vista for reconfiguration of loading

  Loading reconfiguration SVGA_NT

  Action Common_SVGA_Updates for reconfiguration of loading

  Action NT_SVGA_Registry_Updates for reconfiguration of loading

  Loading reconfiguration SVGA_notNT_ACPI

  Action Common_SVGA_Updates for reconfiguration of loading

  Action SVGA_Registry_Updates_APCI for reconfiguration of loading

  Loading reconfiguration SVGA_notNT_NotACPI

  Action Common_SVGA_Updates for reconfiguration of loading

  Action SVGA_Registry_Updates_NotACPI for reconfiguration of loading

  Loading reconfiguration Restore_i8042_NT5

  Action Restore_i8042_NT5 for reconfiguration of loading

  Loading reconfiguration Deref_vpcsrvc

  Action Deref_vpcsrvc for reconfiguration of loading

  Loading reconfiguration Deref_mrxvpc

  Action Deref_mrxvpc for reconfiguration of loading

  Loading reconfiguration Deref_vpcmap

  Action Deref_vpcmap for reconfiguration of loading

  Loading reconfiguration Deref_vpc-s3_NT4

  Deref_vpc-s3_NT4 for reconfiguration of loading action

  Loading reconfiguration Deref_vpc-s3_NT5

  Deref_vpc-s3_NT5 for reconfiguration of loading action

  Loading reconfiguration Deref_vmsrvc

  Action Deref_vmsrvc for reconfiguration of loading

  Loading reconfiguration Deref_netfin

  Action Deref_netfin for reconfiguration of loading

  Loading reconfiguration Deref_cpqdmi

  Action Deref_cpqdmi for reconfiguration of loading

  Loading reconfiguration Deref_cpqalert

  Action Deref_cpqalert for reconfiguration of loading

  Loading reconfiguration Deref_cpqagent

  Action Deref_cpqagent for reconfiguration of loading

  Loading reconfiguration Deref_ipmi

  Action Deref_ipmi for reconfiguration of loading

  Loading reconfiguration RemoveUnwantedKeys

  Action RemoveUnwantedKeys for reconfiguration of loading

  Loading reconfiguration Delete_InfCacheFile

  Action DeleteInfCacheFile for reconfiguration of loading

  Load patches for WINDOWS4.0

  Load patches for WINDOWS4.0

  Load patches for WINDOWS4.0

  Load patches for WINDOWS4.0

  Try ufa_vmImporter

  Plugin path 5: ufa - vmimporter.dll

  Absolute path of the plugin 5: C:\Program VMware Converter Enterprise Agent\ufa - vmimporter.dll

  VMImporterPlugin Init

  VMDB channel name:
  .\pipe\vmware-converter-VMDB, use the SSL protocol: true

  New format for serialization of VMDB VMOMI

  Plugin has started

  UfaClientPlugin Start

  UfaSlavePlugin Start

  SysMigrationPlugin Start

  SysReconfigPlugin Start

  VMImporterPlugin Start

  vmware converter service started

  IVmdbPipe2Impl operation completed with error: the pipe is closed.

  Thanks in advance for any help provided!

  Cannot find anything on your error. It is sometimes better to install standalone converter locally on the server that you are trying to convert. Then run the converter locally on your virtual infrastructure.

  Best wishes / Saludos

  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  ________________________________________

  Nicolas Solop

  VMware vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• Cannot download update KB973593, KB973704, KB976416 and KB974561. Installation of the updates fail - getting error 646. Is there a fix for these updates?

  Have not been able to install recent updates. Get a code error and notice 646. Cannot download update KB973593, KB973704, KB976416 and KB974561.

  Hello

  Make sure you have need of updates (in fact have are programs) and if not control panel - Windows
  Updates - click right on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Camcorder to one of the ports usb gives error code 43

  Original title: when I try to connect my camcorder to one of my usb ports it gives me an error code 43? How can I solve this
  I'm trying to connect my camcorder Panasonic HDC - HS250 HD for my dell inspiron with windows 7. It comes up with an error code 43?  How can I connect my camcorder?

  Hello

  1. don't you make changes on the computer before the show?
  2 is the issue limited to camcorder Panasonic HDC - HS250 HD?

  Error code 43 is an error in Device Manager which means the following:
  Windows has stopped this device because it has reported problems. (Code 43)

  Method 1:
  You can try the steps in the link and check.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  
  Method 2:
  You can update the drivers for the device on the manufacturer's Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference links:
  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  Get help with Device Manager errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

• Uninstall the creative cloud gives error

  Hello, I have tested Adobe Creative Cloud evaluation edition and now want to uninstall it. However, when I on my 8.1 Windows machine gos to control panel-> add or remove programs-> Adobe Creative Cloud-> uninstall... I get the following error message: "creative cloud for desctop could not be deleted. Creative pourrait applications that are installed on the computer, to work correctly. As I use a Danish computer, I don't know the exact wording. However, it is something like that.

  I already have installed other products like Photoshop CS6 Adobe, which I like to keep installed.

  I hope someone can help me to uninstall Adobe Creative Cloud

  Hi Jakob,

  You can try to remove the creative application of cloud using the Adobe CC cleaning tool.

  Please see the link below to download:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Kind regards

  Sheena

• Installation of the Photoshot 13 elements. error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I have 1.38 TB of free space and total control

  I try to install photoshop elements 13, that I bought and downloaded from Amazon. When I try to install it I get the following error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I administrar 1.38 TB of free space and total control.

  Charles please do not remove the installation files in the Program Files directory.  I recommend to extract the installation to your downloads folder or your desktop files.  Once installation files are extracted, you can then run the installation program to install Photoshop elements 13.

• Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

  Hi all

  I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

  This is the code:

  Tell application "Mail".

  theMessages set of selection

  Repeat with thisMessage in theMessages

  the value of the theAttachments attached to a letter of thisMessage

  Repeat with thisAttachment in theAttachments

  the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

  Save thisAttachment in file theAttachmentFileName

  end repeat

  end repeat

  tell the end

  
  

  The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

  The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

  Any help would be greatly appreciated.

  Kind regards

  Beem

  If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

  Try

  game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

  on error - file does not exist

  return Beep 3

  end try

  say application "Mail".

  activate

  the value theMessages to the selection

  Repeat with thisMessage in theMessages

  thisMessage Open

  say application 'System events' to say process "Mail".

  click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

  Repeat until sheet 1 window 1 is

  end Repeat

  key sequence "o" using { control down,shift down}

  key sequence "Nutty".

  click on button 'Save' of the sheet 1 of window 1

  Repeat while sheet 1 window 1 is

  end Repeat

  key sequence 'w', using {control down} - close this message

  end say

  end Repeat

  end say

• Our computer is running slow and sounds like it runs all the time, then gives error reading disk

  Our computer is running slowly.  Looks like it is running all the time.  It will turn off by itself and I say disc read error.  You need to restart all the time.  A lot of the time, he does not let us start windows.

  Original title: slow slow slow

  Robert,

  Try to run the "chkdsk" how to perform disk error checking in windows 7 http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors

  UTC/GMT is 02:19 on Saturday, November 10, 2012

• Cannot complete the installation of the system upward. Error Ox81000037

  Get weekly mssage return incomplete place try again. Error Ox81000037.  Any help?  Thank you

  Hello

  What version of OS are you using?

  I suggest you consult the information referred to in the question of article 2 in the site mentioned below:

  http://support.microsoft.com/kb/973455#workaroundissue12.

• during the installation of the updates I get error message 646 codes & 643

  need help with error 646 & 643 messages

  need help with error 646 & 643 messages

  Error 643:

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Error 646:

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner