Open DB 11g

Dear Oracle gurus,

Please provide a solution for the scenario below.

Scenario:
The oracle DB size is 4 TB and improved since 9i or 10g, GR 11, 2 and the upgrade succeeded.
Now the application is slow responsponding.
Now to return back to 10g DB takes more time that the size of the DB's to TBS.

One of the guru suggested that there is a pl/SQL procedure to achieve this.
Once we put this you can do the DB to work as similar as in the previous versions (i.e. before the upgrade).
In detail, there is no need to downgrade the DB / no change the dictionary table info like that.

Procedure pl/sql name to achieve this, or want to let me know the procedure.

Thank you
Kods

Hello

One of the guru suggested that there is a pl/SQL procedure to achieve this.

Sorry, I don't know such PL/SQL procedure.

But you can try to use init OPTIMIZER_FEATURES_ENABLE param.
>

Kind regards

Tags: Database

Similar Questions

OBIEE 12 c Analytics page is not opening after 11G migration

I installed OBIEE12C in the Linux system, that doesn't have any other application. All services were running after installation, able to connect to the analytical page.
Then I have a migrated application to oracle OBIEE11G 1.1.1.7 to OBIEE12C 12.2.1.0. We are after two stages of migration in accordance with the guidelines and using the MigrationTool.sh file to create the .jar file and then import to 12 c environment.
All the step of migration succeeded. After the Migration, it is watch successful message, but when we try to connect from analytical URL, is getting hanged with message "signing in" after newspaper correct userid and password. I can open the RPD migrated 12 c even system administrator after you download it and I can see the data of the RPD (see data). But when logign by analytical page, his request for user and password then get suspended.
I tried with simple migration of RPD also who has only a simple RPD and a dashboard, always after the migration cannot connect in analytics. It was working properly before the migration. That services are up and running I can verify with the same userid of the EM.
Verified log file and is following in the log file-error message
bi_server1.log
FileComment
-----------------
# < 3 December 2015 07:26:57 UTC > < > < HTTP error > < ip-10-0-0-31 > < bi_server1 > < ExecuteThread [ASSET]: '45' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > < 4fba9060-f79c-4c53-814a-bf3ba3b73ec5-00095a9f > <>< 1449127617580 > < [gravity-value: 8] [RID: 0] [partition id: 0] [partition name: DOMAIN] > < BEA-101017 > < [ServletContext@569847560[app module [[: analytics: access path specification: null Analytics-version: 3.1]] Root cause of ServletException.
java.net.SocketTimeoutException: read timed out
File name
------------
sawlog0.log
FileComment
-----------------
[2015-12 - T 03, 07: 29:55Z] [OBIPS] [ERROR: 16] [] [saw.soap.makesession] [ecid: 4fba9060-f79c-4c53-814a-bf3ba3b73ec5-00095a17,0:1] [tid: 2836215552] [If - name:] [DLI - name:] [DLI-GUID:] [username:] authentication failure. Invalid session ID or session expired (ending session ID by ")
Could not complete the authentication in the specified time-out period. [[
[2015-12 - T 03, 07: 29:55Z] [OBIPS] [ERROR: 16] [] [saw.rpc.server.responder] [ecid: 4fba9060-f79c-4c53-814a-bf3ba3b73ec5-00095a17,0:1] [tid: 2836215552] [If - name:] [DLI - name:] [DLI-GUID:] [username:] fatal error during the response of fixed length. [[
File name
------------
bi_server1 - diagnostic.log
FileComment
-----------------
[2015-12 - T 03, 07: 20:55.732 + 00:00] [bi_server1] [INCIDENT_ERROR] [DFW-40104] [oracle.dfw.incident] [tid: [ASSETS].] [ExecuteThread: "14" for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: < WLS Kernel >] [ecid: 4fba9060-f79c-4c53-814a-bf3ba3b73ec5-00095a99,0] [errid: 3] [detailLoc: / home/oracle/Oracle/Middleware/Oracle_Home/user_projects/domains/bi/servers/bi_server1/adr/diag/ofm/bi/bi_server1/incident/incdir_3] [probKey: DFW-99998 [java.net.SocketTimeoutException] [oracle.bi.security.filter.BISecurityFilter.handleAnonymousSubject] [analytics]] [partition name: FIELD] [tenant name: GLOBAL] incident created 3 to key problem "DFW-99998 [java.net.SocketTimeoutException] [oracle.bi.security.filter.BISecurityFilter.handleAnonymousSubject] [analytics].
nqserver.log
--------------------
(/ Home/Oracle/Oracle/middleware/Oracle_Home/bi/bifoundation/Server/bin/libnqutilitygeneric64.so(_ZN15SUXErrorCatalogD0Ev+0x2D) [0x7f7ed143bddd]
/home/oracle/Oracle/Middleware/Oracle_Home/bi/bifoundation/server/bin/libnqutilitygeneric64.so(_ZN7_SASSTL8_Rb_treeIN3sup6StringIwNS_9allocatorIwEEEENS_4pairIKS5_4HeapI15AMessageCatalogEEENS_10_Select1stISB_EENS_4lessIS5_EENS3_ISB_EEE8_M_eraseEPNS_13_Rb_tree_nodeISB_EE+0x38)[0x7f7ed1445dc8]
(/ Home/Oracle/Oracle/middleware/Oracle_Home/bi/bifoundation/Server/bin/libnqutilitygeneric64.so(_ZN22MessageCatalogRegisterD1Ev+0x20) [0x7f7ed1442f80]
(/ lib64/libc.so.6(+0x38e49) [0x7f7ece8dde49]
(/ lib64/libc.so.6(+0x38e95) [0x7f7ece8dde95]
(/ Home/Oracle/Oracle/middleware/Oracle_Home/bi/bifoundation/Server/bin/libnqportable64.so(_ZN48SingleThreadedUtilityPortableErrorMessageManager17ThrowErrorMessageEiPKcS1_+0x4A) [0x7f7edb7b7a8a]
/home/oracle/Oracle/Middleware/Oracle_Home/bi/bifoundation/server/bin/libnqportable64.so(_ZN6SUPDOM13ParseDocumentERKN3sup6StringIwN7_SASSTL9allocatorIwEEEERN14obixercesc_2_815XercesDOMParserER19SUPDomErrorReporterR23SUPDOMPrintFormatTarget+0x184)[0x7f7edb7c34d4]
Cat - man.log
------------------------
[username:] Instance Catalog Path: '/home/oracle/Oracle/Middleware/Oracle_Home/user_projects/domains/bi/tmp/bi/migration-tool/migration-bundle-plugin-data1450263029898/PerPluginTemp/metadata/11gExtracted/metadata/runtime/content/catalog'. [[
Leader: catalogimpl.cpp
Online: 58
Geographical area:
Saw.Catalog.local.Initialize
saw.catalog.manager.loadCatalog
Saw.CatalogManager
]]
[2015 12-16 T 10: 50:57Z] [OBIPS] [WARNING: 1] [,] [saw.catalogmanager] [ecid:] [tid:] [If - name:] [DLI - name:] [DLI-GUID:] [userId:] WARNING: you connect to a version not upgraded webcat: 11.1.1.6.1! [[
Leader: cmjniconnection.cpp
Online: 507
Geographical area:
Saw.CatalogManager
]]
[2015 12-16 T 10: 50:57Z] [OBIPS] [NOTIFICATION: 1] [,] [saw.subsystem.catalog.initialize.upgrade] [ecid:] [tid:] [If - name:] [DLI - name:] [DLI-GUID:] [username:] catalog upgrade has started []
Leader: initializecatalog.cpp
Line: 1207
Geographical area:
Saw.Subsystem.Catalog.Initialize.Upgrade
Saw.Subsystem.Catalog.Initialize.upgradeexceptions
Saw.CatalogManager
]]
[2015 12-16 T 10: 50:57Z] [OBIPS] [WARNING: 32] [] [saw.security.securitymanagerloaderimpl.addguidtorecoveryfolder] [ecid:] [tid:] [If - name:] [DLI - name:] [DLI-GUID:] [username:] new GUID for BISystemUser account, add old GUID 6440A5809E8711E5BFAD4D38B389E04E folder recovery []
Leader: securitymanagerloaderimpl.cpp
Line: 1967
Geographical area:
Saw.Security.securitymanagerloaderimpl.addguidtorecoveryfolder
saw.security.securitymanagerloaderimpl.handleaccountGUIDupdate
Saw.Security.securityimpl.handlechangedguid
Saw.Subsystem.Catalog.upgradeaccountsimpl.handleldapusers
Saw.Subsystem.Catalog.upgradeaccountsimpl.upgradeaccounts
Saw.Subsystem.Catalog.Initialize.upgradeexceptions
Saw.CatalogManager
]]
[2015 12-16 T 10: 50:57Z] [OBIPS] [WARNING: 32] [] [saw.security.securitymanagerloaderimpl.addguidtorecoveryfolder] [ecid:] [tid:] [If - name:] [DLI - name:] [DLI-GUID:] [userId:] new GUID for weblogic account, add old GUID 6D090ED09E8411E59F3825854EC7A686 folder recovery []
Leader: securitymanagerloaderimpl.cpp
Line: 1967
Geographical area:
Saw.Security.securitymanagerloaderimpl.addguidtorecoveryfolder

Something is migrated, but I guess it's just a piece of it (I planned to test this part in detail in the coming weeks).

But as there are tons of models of security different users can configure they can't really make a migration of "miracle".

I guess that it migrating application roles (default 12 roles have a different name if I'm not mistaken) and you saw that application roles were there. But it cannot migrate any user or group that is part of Weblogic and not really a component of OBIEE. So because of the different names in default 12 c the migration wizard cannot find the group that's wanted to attribute it to an approle and you close up with approles empty.

If you had an external authentication provider and you did before in 12 c installation migration I figured everything was fine...

The important thing is that you can now login and validate the process of migration on your system.

Can you maybe close the thread because at the moment it is still this question is no answer. ?

Upgrade SOA 11 g SOA 12 c

Hello
I need to upgrade SOA g 11 12 c SOA project using ant scripts. I couldn't find the Ant-sca - upgrade.xml below 12 c Jdev installation. But the compilation and deployment scripts is available in the directory Middleware\Oracle_Home\soa\bin any idea what ant file must be used for the upgrade to 12 c?
Thank you
SAI.

-There is no need to migrate projects SOA 11 g SOA 12 c. 11g projects should work as - is on a server of 12 c. That's why no utility command line (like the Ant-sca-upgrade) is provided in JDeveloper 12.1.3.

-However if you want to use 12.1.3 new features on projects in 11g, then open projects 11g on 12.1.3 JDEV, which will inaugurate the migration projects and 11g 12 c gets migrated to 12.1.3 seamlessly.

Hope that answers your questions.

Oracle 11g XE on Open Suse 13.1

Hi all
I'm currently installing an Oracle 11 g Express on Open Suse 13.1 in a virtual machine.
I used the document as a reference for my installation: Oracle Database Express Edition
Comments:
I have a facility of Open Suse 13.1 vanilla except for these changes:
- I adjusted/etc/hostname to OpenSuse, in order to avoid special characters in the host name
- I increase the 2045 to 2049 MB SWAP partition to ensure the minimum configuration
I downloaded the RPM and extract. Then I started the installation
SUSE@openSUSE:~/downloads/Disk1 > sudo rpm - ivh oracle-xe - 11.2.0 - 1.0.x86_64.rpm
root password:
Preparing... ################################# [100%]
/var/tmp/RPM-tmp.jL4h0F: line 257: [: 18446744073709551615: integer EXPECTED]
Update / installation...
1:Oracle - xe - 11.2.0 - 1, 0 # [100%]
Execution of the post-installation steps...
You must run 'configure /etc/init.d/oracle-xe' as the root user to set up the database.
Afterwards, I ran the configure script using the default values:
SUSE@openSUSE:~/downloads/Disk1 > sudo /etc/init.d/oracle-xe Setup
Oracle Database 11g Express Edition Setup
-------------------------------------------------
This will configure the startup properties of database Oracle 11 g Express
Edition. The following questions will determine whether the database should
start the system startup and ports, it will use passwords that
will be used for database accounts. Press < enter > to accept the default values.
CTRL-C will stop.
Specify the HTTP port that will be used for Oracle Application Express [8080]:
Specify a port that will be used for the listener to the database [1521]:
Specify a password to use for database accounts. Note that the same
password will be used for SYS and SYSTEM. Oracle recommends using
Different passwords for each account database. This can be done after
initial Setup:
Confirm the password:
Want that Oracle Database 11g Express Edition to be started on boot (y/n) [o]:
From Oracle Net listener... Fact
Configuring database...
Configuration of the database failed. Look at /u01/app/oracle/product/11.2.0/xe/config/log for more details
You have an idea what is happening here? I have attached the newspapers and some additional information. Maybe you can help me?
Thank you very much in advance!
cloneDBCreation.log
Create controlfile reuse set database "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN dbms_backup_restore.zerodbid (0); END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'
Create controlfile reuse set database "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter system enable restricted session
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER database resetlogs open "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER database rename global_name to "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter system switch logfile
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
change of system checkpoint
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter database drop logfile Group 3
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/XE/temp.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select nom_tablespace from dba_tablespaces where nom_tablespace = "USERS".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select the sid, program, serial No., user name of session $ v
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter user sys identified by 'oracle '.
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
change the system of the user identified by 'oracle '.
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
modify the disable restricted session system
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
CloneRmanRestore.log
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'
Select TO_CHAR (systimestamp, 'YYYYMMDD hh') of double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
declare
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select TO_CHAR (systimestamp, 'YYYYMMDD hh') of double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0

postDBCreation.log
Start
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Created file.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'
Select ' utl_recomp_begin: ' | TO_CHAR (sysdate, ' hh) double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN utl_recomp.recomp_serial (); END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select ' utl_recomp_end: ' | TO_CHAR (sysdate, ' hh) double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
postScripts.log
CREATE or REPLACE a LIBRARY dbms_sumadv_lib AS ' / u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN dbms_datapump_utl.replace_default_dir; END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Commit
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
create or replace the XMLDIR directory as ' / u01/app/oracle/product/11.2.0/xe/rdbms/xml'
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
DELETE THE ORACLE_OCM_CONFIG_DIR DIRECTORY
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
DELETE THE ADMIN_DIR DIRECTORY
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
REMOVE THE WORK_DIR DIRECTORY
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN dbms_swrf_internal.cleanup_database (cleanup_local = > FALSE); END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Commit
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
/ etc/HOSTNAME
OpenSuse
/ etc/hosts
#
# hosts this file describes a number of host-address name
mappings for the TCP/IP subsystem. It is especially
# used at the time, when no name servers are running.
# On small systems, this file can be used instead of one
# "named" server name.
# The syntax:
#
# IP address full-qualified-Hostname short-Hostname
#
127.0.0.1 localhost
# a special IPv6 address
: 1 localhost ipv6-ipv6 loopback localhost
FE00::0 ipv6-localnet
FF00::0 ipv6-mcastprefix
FF02::1 ipv6-allnodes
FF02::2 ipv6-allrouters
FF02::3 ipv6-allhosts

Hello

1.

Please set up your domain in/etc/hosts FULL name

https://en.Wikipedia.org/wiki/Fully_qualified_domain_name

http://KB.IU.edu/data/AIUV.html

your turns to me such as CentOS and Oracle Linux.

Or take a look at the site of intrest:

http://www.Novell.com/documentation/SUSE91/SUSELinux-adminguide/HTML/ch14s03.html

127.0.0.1 localhost

192.168.85.133 OpenSuse. ??? OpenSuse

2.

To connect:

sqlplus sys / as sysdba

or

sqlplus system /.

Note: the password is case sensitive!

or disable this as SYSDBA (sqlplus sys / as sysdba):

ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON IS FALSE SCOPE = BOTH;.

3.

Set the password:

ALTER DEFAULT PROFILE LIMIT PASSWORD_LIFE_TIME UNLIMITED;

and restart

stop immediately;

start-up;

4.

I created a /ect/profile.local file with:

. /U01/app/Oracle/product/11.2.0/XE/bin/oracle_env.sh

Thus, every time you start, it will set the environment.

It's my Profile.local:

. /U01/app/Oracle/product/11.2.0/XE/bin/oracle_env.sh

ORACLE_HOME=/U01/app/Oracle/product/11.2.0/XE

ORACLE_OWNER = oracle

ORACLE_SID = XE

LSNR = $ORACLE_HOME/bin/lsnrctl

SQLPLUS = $ORACLE_HOME/bin/sqlplus

Export ORACLE_HOME

export ORACLE_SID

export ORACLE_BASE = / u01/app/oracle

export PATH = $ORACLE_HOME/bin: $PATH

NLS_LANG='$ORACLE_HOME/bin/NLS_LANG.sh'

ORACLE_ADMIN = / u01/app/oracle/admin / $ORACLE_SID

export ORACLE_ADMIN

ORACLE_FLASH = / u01/app/oracle/fast_recovery_area / $ORACLE_SID

export ORACLE_FLASH

ORACLE_ALERT = / u01/app/oracle/diag/rdbms/xe/XE/trace

export ORACLE_ALERT

ORACLE_DATA_PUMP_DIR = / u01/app/oracle/admin/XE/dpdump

export ORACLE_DATA_PUMP_DIR

DIAGNOSTIC_DEST = $ORACLE_HOME/log

export DIAGNOSTIC_DEST

TNS_ADMIN = $ORACLE_HOME/network/admin

Export TNS_ADMIN

5.

Recreate the DBSNMP user in the database as SYSDBA (sqlplus sys / as sysdba):

@/u01/app/oracle/product/11.2.0/xe/rdbms/admin/catnsnmp.sql

@/u01/app/oracle/product/11.2.0/xe/rdbms/admin/catsnmp.sql

Best regards.

installed 11g not opening not XE
Good afternoon
After the installation of oracle 11g XE.if I open, im getting error.im of status-404 http by using the windows xp operating system
can someone help me solve this problem...

Thank you
Prakash

Published by: Jean-Marc T Prakash on April 16, 2013 17:31
Hello Prakash,

It's an indication of the cause of your problem:

Apache Tomcat/6.0.36

It's a guess from my previous post: you run on the server that you have installed XE on an Apache Tomcat. Used by your Tomcat default port is 8080, which is also the default port for the HTTP internal database server that is used to signify the request you are trying to access.
As I mentioned before, you have one of the following options:
(A) change the port used by your Apache Tomcat, either by using the configuration gui (if available) or by changing the configuration of the connector in the server.xml file in the directory conf of Tomcat.
(B) change the port used by the internal HTTP server by issuing the following command as a sysdba/sys:
```
exec dbms_xdb.sethttpport();
commit;
alter system register;
```
... where you replace ++ with an alternate port, e. g. 8088. You must change the URL of your link to apex / http://127.0.0.1:8080 / f? p = 4950 to apex / http://127.0.0.1:8088 / f? p = 4950 in this case.
(C) disable the internal HTTP server and deploy APEX Listener on your Tomcat. It will be a little more difficult, as a listener APEX will require a few installation steps more and Tomcat is not a container JEE taken care of (but functional) for this task.

I recommend you start with B) and see if you get everything works as expected.

-Udo

Problems opening existing Oracle 9i in the new environment of 11g
Hello world

I have a challenge for you! Just to be clear, I am not a specialist of the Oracle (or call me a noob Oracle).

Challenge: Open an Oracle 9i database in a new Oracle 11 g environment.

Result: Be able to connect to an Oracle database running with "SSMA for Oracle" to convert it to a SQL database.

Starting point:
-Receipt of the customer: DBF, CTL and logs of an Oracle environment existing.
-Since I can't download Oracle 9i environment, I chose to install 11g environment and hope for a good backward compatibility.

How I got:
-Installed 11g environment
-Set up a database pointing to the files DBF
~ Change init.ora to use CTL files
~ Create init.ora spfile
~ Start database mount and rename the database and data files using sqlplus (liaison with "sys as sysdba")

Questions:
Now I can start the database, but sometimes with a * "ORA-00704: bootstrap process failure" * and recommend I start it with the UPGRADE option. "» Start with UPGRADE option works and I can navigate through the database using Toad tool (login 'as sysdba'). But 'SSMA for Oracle' is not an option to connect 'as sysdba' and gives me a "ORA-39710: only connect AS SYSDBA is allowed when it is OPENED in UPGRADE mode.

Since the MASA for customer Oracle cannot connect to a database started with the UPGRADE option I probably have to fix the "ORA-00704: bootstrap process failure»
I tried to avoid the upgrade option in trying to upgrade the database to 11g. But utlu112i.sql and catalog.sql give me errors like "ORA-04023: object SYS." STANDARD cannot be validated. "

Issues related to the:
-Do you think I want to achieve is possible at all?
-Can I easily run an Oracle 9i database in a 11g environment or what I really need to upgrade?
-Do you think it is the best way to get an Oracle existing database running in a new environment?
-If Yes: how to solve the error ORA-00704?

If you need more information, alert logs, files .ora or anything to give an appropriate response, please ask and I'll give them.

Thanks in advance!

Kind regards

DirCo
Hello

9i binaries are no more on the website of oracle since this version is located in the long ago.

What I would do (since you have your files backed up somewhere, at least I hope) is simply:
Set oracle_sid = xxx
sqlplus/nolog
Connect / as sysdba
start upgrade
@?\rdbms\admin\catupgrd.sql (to upgrade the database)
@?\rdbms\admin\utlrp.sql (to compile the modules)

Wait a while (2-3 hours)

immediate stop
startup

Check no errors in alert_log and you have access to your data.

Then 2 possibilities:

It worked - so everything goes well for you.
It does not, replace your original files and try something else.

I think this will work if, as we have already said, you're 9.2.0.4 or more.

Do not lose time on futile questions such as 'what is really the version of my files. You care, upgrade script works for all of the above versions 9.2.0.4.

Don't forget that:
Passwords are now (11g) case sensitive (but you can change them when logged in sysdba)
Some pl/sql will not compile, but I think that you are mainly interested in the data.

I hope this helps.

Christian COMMARMOND

11g Download Page does not open
11g Download Page does not open and the second file of 11 g release 2, 2 2 file is corrupted please check it out.
Thank you and best regards,
Salman Bin Muhammad
Karachi, Pakistan
Hello

I can open the page without any problems, maybe you try to download Oracle when they were in respect of maintenance operations.

http://www.Oracle.com/technology/software/products/database/index.html

Please try again.

Kind regards

Mario Alcaide

http://marioalcaide.WordPress.com

Forms 11g - Weblogic Server - command prompts remain open?
is it true, that I have to log on to the windows server, start the Admin Server for the Weblogic Server domain manually.
If I want to go to the admin on the 7001 port Console?

is it true, that I have to log on to the windows server, start the Weblogic Server WLS_FORMS manually.
If I want to start any form?

Today, I want to just set up a server of Oracle 11 g applications as we would need for our customers.
So I installed Oracle Fusion Middleware 11g on Windows 2003 Datacenter Server US version named "Center."
I took the Version we just to test, cause on my machines the Oracle Installer rolls in German and
If this can make the problems I had so far.

I installed the following components:
Server components
Oracle Forms
Oracle Rerports

Development tools
None

Components management
Enterprise Manager

The system components
Oracle HTTP Server OHS

Cluster: No.

Summary after the normal process installaltion 70 minutes:
Type: Oracle Portal, forms, reports and discoverer Installation
Configuration options
Rental house Middleware: C:\Oracle\Middleware
Oracle Home location: C:\Oracle\Middleware\as_1
Location of Oracle Instance: C:\Oracle\Middleware\asinst_1
Oracle instance: asinst_1
Domain option: create the domain
Domain name: ClassicDomain
House area: C:\Oracle\Middleware/user_projects/domains/ClassicDomain
Host name of area: Center
Area Port No.: 7001
Username: weblogic
Automatic Port detection: true
The Administrator console: http://center:7001 / console
Console EM: http://center:7001 / em
EMAgent URL: http://center:5155/emd/main
URL of the form: http://center:8888/forms/frmservlet
Reports URL: http://center:8888/reports/rwservlet

H5. First chess whithout six facilities! Yep!

I pressed Finish to close Setup and wait about 6 minutes until he had gone...
^ (at the end of this message, is there a screenshot of my "half-dead-windows-server"...).

When you restart it takes four cmd.exe and a "hard-killed" beeing javaw.exe before stop...

After you restart windows:
http://Center:7001 / console - unreachable
http://Center:7001 / em - unreachable
-EMAgent URL: http://center:5155/emd/hand - accessible (with congratulations :))
-http://center:8888 - accessible - 11 g homepage
Forms / http://center:8888 / frmservlet - inaccessible - failure of the bridge APACHE Server
reports / http://center:8888 / rwservlet - inaccessible - failure of the bridge APACHE Server

The process Windows Oracle Service Manager (asinst_1) is a race.

opmnctl status:
emagent_asinst_1 - life
ReportsServer_center_asinst_1 - life
ohs1 - life
where is a process forms_asinst_1 or something like that?

After starting the management server in Weblogic Server domain manually.
inclusiv weblogic username and password, wait 4 Minutes,
http://Center:7001 / console is accessible.

Under environment / servers / command in the Weblogic Console, I try to start wls_forms.
Message
For the WLS_FORMS server, the Node Manager associated with the centre of the machine is not accessible.
All selected servers are currently in a State that is not compatible with this operation or are not associated with a Node Manager running or you are not authorized to perform the requested action. No action will be taken.

-can I can set a password somewhere? I do not found...

So I start manually the Weblogic Server WLS_FORMS
inclusiv weblogic username and password and waiting 2 Minutes.
Then the WLS_FORMS in the Weblogic administration Console server is running.

H5. I disconnect from the windows console and all the servers manually started and services are declining. *(?!) *

H5. Is there another way to start the server of forms without having to open back-boxes?
-----
H6. Windows task after installing Middleware Oracle 11g
! http://www.maugo.de/image/11gsummary.jpg!

Published by: Magoo on July 24, 2009 11:38
To reduce the memory: see my contribution to the post on the implementation of development Forms 11 g environment.
With respect to the guests: it is possible to set up a Windows Service for the launch of WebLogic. Refer to the manual to WebLogic "Managing Server Startup and shutdown.

Developer reports 11g fails when opening the data model view

Hello
I see this on one of my client sites.
They have just upgraded to 11.1.2.2.0 suite of developer on Windows 7. The works of developer of fine forms, reports developer opens the report ok, but when you try to use the data model view, the program crashes and closes.
I checked the usual suspects such as the REPORTS_TMP registry variable.
This happens when trying to create a whole new report also, therefore seems to be an installation problem.
Saw someone else this please?
Tony

Hello Tony,.

Then, check this box.

Hamid

OBIEE 11g migration: weblogic user cannot open a session in analytics

Hello
We simply migrate obiee 11g successfully from one server to another server.
but now after the migration we are not able to log into the analytical page with weblogic user.
This weblogic user is able to connect to the Console and EM, but not in the analytical page.
Any user can connect to the console, EM and analytics page.
so far,.
We tried trobleshooting with the following links,
1. Weblogic
2. also tried with deleting user weblogic and yet once created weblogic.
but no luck.
Note: I noticed when we migrated the users and roles from one server to another, then the user weblogic worked very well, could even connect to the Analytics page.
But as soon as we have migrated and deployed RPD, only since then, while we are facing this problem.
have idea on this.
TIA

Refresh GUID will help u here

11g forms builder is not able to open Internet explorer
Hello
My problem is that my forms builder is not able to open the form in Internet Explorer when compiling if Internet explorer is not already running, but he is able to open the form in a new tab, if Internet explorer is already running.
Don't care about my system: -.

Generator of forms of Oracle 11 g

Windows 2008 SP2

Version Internet explorer:-Internet explorer 9

Help, please.

Thank you
RS
1. in the generator to make sure you have the valid values for the fields of Application Server URL and location of browser in the preferences (tab) Builder Runtime. Do not leave an empty field.

2. in the settings of the browser, under the Advanced tab, scroll to the Security section and check the box labeled 'allow active content to run in files on my computer '.

3. click OK to save the changes. Close the browsers open

4 retest

University Complutense of MADRID 11g check out and open native
Hello

I use 11 GR 1 material - 11.1.1.5.0 - idcprod1 - 110413 T 184243 (Build: 7.3.2.182).

I want to use the check-out and open in a native functionality to edit word files and create their versions directly from the system, but it seems that this funcyionality is not working.

If ii click on check out and open the action menu, info doc page nothing happens. No newspaper... nothing.

Anyone know what could be the problem?

Thanks in advance
Hello

You SAY client installed on the machine where it is tested on. Otherwise download the client TELL to UCM - My Content Server - my downloads and install it. Then the same test, and see if it works.

Thank you
Srinath

Generating reports (11g R2) crashing when you open the data model - VGS.dll Crash
Hello
I have the Report Builder on a 2008 Server R2(64-bit) with 11 g R2 (11.1.2 - 64bits) configured with weblogic, reports and forms for a developer machine. Whenever I try to open the data in a report, Report Builder model no longer works and I get error APPCRASH indicating Module as VGS.dll error all the time. If someone had a similar problem before, please help me.

Problem event name: APPCRASH
Application name: rwbuilder.exe
Application version: 11.1.2.0
Application timestamp: 4e8c21a7
Fault Module name: VGS.dll
Fault Module Version: 11.1.2.0
Timestamp of Module error: 4e996706
Exception code: c0000005
Exception offset: 00000000000988b 1
OS version: 6.1.7600.2.0.0.16.7

Thnx,
Sona.
Hi son, one
Try this after the closure of Report Builder.

1-backup ORACLE_INSTANCE\config\FRComponent\frcommon\TOOLS\admin\cauprefs.ora

2. then open this file in a text editor (such as Notepad) and look for the following lines:

Reports.PluggableDataSourceFactories =
("oracle.reports.plugin.datasource.xmlpds.XMLDataSourceFactory",
"oracle.reports.plugin.datasource.jdbcpds.JDBCDataSourceFactory,"
"oracle.reports.plugin.datasource.textpds.TextDataSourceFactory")

and change these lines as follows:

Reports.PluggableDataSourceFactories =)

3 save the file

4 - retry

It will be useful. Roberto

File text open in forms 11G
Hello
We use client_host to open a file in windows directory in wordpad.
However, if the name of the directory window includes spaces the client_host throws an error saying that there is no file in the specified location.
Example: C:\documents and setting\file.txt
Error: Cannot find file in the specified directory C:\documents

Thank you.
Hello

you just put the path to the file in "" for example: "C:\documents and setting\file.txt".

And don't forget the values of the parameters set in "" when he content SPACE.

Bye,.
Tarun

Published by: Tarun.Oracle on February 11, 2012 11:03

Error 11g ODI opening...
Hi all

I have installed ODI 11 g, while I try to open the studio ODI he says "unable to launch java virtula machine located in the path:"

c:\Program files\java\jdk1.7.0_02\jre\bin\server\jvm.dll.

can guide me how to solve this problem.

Thanks in advance...
Hello
I had the same problem and finally solved

I decided to edit the odi.conf file located in C:------oracle------product------11.1.1------Oracle_ODI_1------oracledi------customer-odi-bin

looking for this line (at the end)
SetJavaHome C:-Program Files-Java-jdk1.6.0_30
and change it to this
SetJavaHome C: \ Program Files (x 86)-Java-jdk1.6.0_23

do not ask me that why, I know that I am able to work with my odi11g on Win7 64 bit

----
Miguel Flores

Open DB 11g

Similar Questions

Maybe you are looking for