Open Source Windows Client to connect to VMWARE 2.0 on a Debian server

Similar Questions

• Can EE hyperic or open source windows file systems mounted remote monitor?

  Can EE hyperic or open source windows file systems mounted remote monitor? actions
  
  I have a server windows Hyperic Enterprise Version 3.0.3 and if I click on the dashboard, the Assembly resource file server, I see it as a green ball, local NTFS file systems, but the remote file systems have a gray ball. I see this on the server as well as on the windows client EA servers.
  If I try to conifure the disk, he says it is NOT installed or not configured correctly.  Since
  client and server hyperic windows run as root, I thought I could have access to the entire disk.
  Can monitor hyperic actions or remote windows file systems?  Maybe it's the account that installed the hyperic has a server share file system remote z:\, but my root account
  I use to access the EE hyperic server does not work?

  When you install the Windows agent as a service, it begins in place and works using the default SYSTEM account. This account has full administrative rights to monitor most of the things on the local computer, but will not be able to connect to remote shares on the network. The account used to install the software has no impact at this stage. In addition, the agent, not by the server permissions, are what effect the possibility of access to the remote network share.

  If you want to monitor your network shares using the agent on this box and not on the server that actually hosts the network share, you can change the agent service through the Services Control Panel:

  1. go to start-> Control Panel-> administration-> Services tools

  2. find the "HQ Agent" service and double-click (or right-click and select properties)

  3. on the connection tab, select it "this account:" radio button, and then enter a valid network user account information, as well as his password

  4. click on apply or OK to apply the change takes effect

  5 restart the service "Agent HQ"

  Keep in mind, no matter what you are using an account must have permissions to gather information of the local area, as well as the permission to connect to the remote network share.

• USB redirection works with a view Windows Client that connects to a Pool of RDS running Server R2 2012

  I installed the Agent view Horizon (6.0.0) and direct view connection Plugin (6.0.0) on a physical server running Windows Server R2 2012 with desktop Services remotely active.  I would use the USB redirection from the client to the server.   When I connect to the remote desktop session by using the Windows Vista client, he tells me that the USB redirection is disabled.   I tried connecting the View Client to the server view connection and directly to the RDS Server with the same result.  I need to activate RemoteFX on the Windows Server running RDS for USB redirection to work?  I don't have any hardware remotefx, that's why I have not yet tried.

  USB redirection is not supported on the RDS (2008 or 2012) guests in Horizon 6.0.

  see you soon

  peterB

• Have to install the CAD Client AND the server software on the Windows Client computer

  Hello
  
  I have a problem during the installation of the customer Oracle Data Warehouse Administration Console (DAC) on my Windows x 86 client computer.
  
  Architecture
  
  Applications server - A Machine (Informatica 8.6.0 + fix 4.0 & DAC 10.1.3.4.1 services) = Linux RHEL 64-bit
  Basis of data server - Machine B (application Oracle BI OBAW data warehouse) = Linux RHEL 64-bit
  Client - Machine C (BI Apps 7.9.6 + Informatica customer customer 8.6.0 CAD) = Windows x 86 32 bit)
  
  Question
  
  I had planned to install ONLY the DAC 10.1.3.4.1 customer on my 32-bit x 86 Windows client machine, as the CAD 10.1.3.4.1 server must be installed on Linux which is installed the Informatica PowerCentre 8.6.0 server application layer.
  
  However, when I run the Oracle Universal Installer, installation options are greyed out and I have to install the Client and server products.
  
  I don't want to do that. Why am I made to install both? Is there a solution?
  
  Any help or suggestions are greatly appreciated.
  
  Have a great day.
  
  Kind regards
  Gary

  Customer installation support DAC only on Windows is to copy the executable files of the area where you installed CAD using the Installer (say another windows box).

  If you install the CAD by using the Setup program on the area where you don't want the client of the DAC, it will also install server DAC. In this case, your client DAC can be confused to
  connect to the local server of DAC, so better avoid to install DAC and copy the executable files for the client computer DAC. Customer of the DAC must also the odbc14.jar and Informatica customer files
  to connect to Informatica.

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• Why windows does not connect to the Group Policy client?

  I am currently using a dell inspiron with windows 7 Edition 7720 Home premium and recently a message started to appear above my taskbar saying

  "Unable to connect to a windows service.
  Windows could not connect to the Group Policy Client service. The problem prevents standard users to log on to the system.
  As long as administrator, you can go through the system event log to see why the service failed"
  Anyone know why this is happening and how to fix it?

  The resolution is quite easy. Ignore all these tech geeks here and on other sites that just want to show how they can play with the registers - a very dangerous game.  Go to search, type in cmd, open cmd as administrator.  Type exactly this (with the indicated spaces): netsh winsock repair, and then press ENTER. You need to restart (NOT close and turn on) your computer. Bingo! Unfortunately, this condition can re - occur from time to time, as if you start your computer before you turn on your internet connection and establish a good connection.  Don't worry the fix takes about 3 to 5 minutes depending on your speed of restart computer.

• Client cannot connect to the shared folders Windows 10

  I am running VMWare workstation 12.10 on Ubuntu 15.10, with a client Windows 10.  For a few days, something has changed which prevents my Windows client computer to connect to the VMware - shared folders I get error messages or notification of is that there is a problem: just a link to a folder shared!  DOEA anyone know what could be the cause?

  Hello

  Please take a look at this thread for VMware Fusion (whereas it is for the merger, the feature and thus work troubleshooting even for workstation)

  Shared folders - upgrade Windows 10 of 15.11.

  --

  Wil

• VMware and VMware assessment Open Source downloads

  As I begin my quest of VCP, I noted that vSphere 4.1 is available as a 60-day evaluation copy.  I also noticed that most of VMWare products are available as an Open Source download.  What is the difference between the two?  Open source includes source code that needs to be compiled?  Open source includes all the features that downloads of evaluation?  After the expiration of my assessment of 60 days can re - install a new copy of the assessment?

  Also, I intend to use a machine virtual Workstation 7.1 on a single machine (2 E5450 image Intel processors, 32 GB memory, SATA 3 x 300 GB disks and dual gigabit NIC).  Workstation 7.1 is only a 30-day trial, how do I overcome this problem so I can continue studying the limit of 30 days?  Is there free workstation downloads that can run all the vSphere components?  What virtual machine, it can perform all the tricks of vSphere?

  I know it's quite a few questions, but I am planning for most eventualities.  Any help that can be provided will be greatly appreciated!

  Mark

  I would like to buy a copy of the workstation. With enough resources, it seems that you have, you can nest several ESXi facilities such as virtual hosts and run the 32-bit clients within those. If you run vCenter and a shared storage VM directly as long as virtual machines in my computer, it is possible to create a nice mini data center on a single machine. It is possible to test most of the features of vSphere, including things like vMotion. The ability to run ESXi nested is directly supported by WS 7. I don't think it's possible in 5 WS.

• "MB Ethernet Slave Demon.vi" connection lost when opening a windows dialog box in my application

  Hello everyone,

  I am currently working on a LabVIEW application that communicates with a PLC using a Modbus Protocol (with an ethernet cable). The PLC is the master and the PC is the slave.

  The code is based on the Modbus of LabVIEW examples: "MB Ethernet example Master.vi, MB Ethernet example Slave.vi and MB Ethernet slave Demon.vi. It is not the first time I use it.

  But I recently discovered a problem. In my application, I have a pop-up with a button that opens a windows dialog box to select a result file.

  When the windows dialog box opens, the "MB Ethernet Slave Demon.vi" crashes (I put a meter inside to see what happened and it stops at the moment opens the dialog box), then when I close the dialog box, the counter continues to count, the connection ID is empty, and the number of the demon slave VI connection resets to 0. When communication is re-established between the PC and PLC (like 10 seconds after the closure of the dialog box), the number of connection go to 1 and table of login ID is no longer empty.

  Otherwise, the communication works very well. But not when the dialog box opens and is a significant problem for me because the user must be able to open results file during production that needs the Modbus communication at work because it's the controller who gives orders the computer to run the production cycle.

  Thanks in advance for your help.

  If you think that the problem is inside the library NI Modbus (old), why don't you use the most recent which is available on the network of tools? Link is here: https://decibel.ni.com/content/docs/DOC-30140

  Looking into some of the screws in the library, she uses methods of Server VI as "Run a VI" that will perform the loop of the root, as it crashes while the file dialog is open. I suspect that the new version of the library is not the problem.

• What is the most appropriate software open source antivirus for Windows XP?

  Dear community,

  Can you kindly tell me about the most appropriate antivirus software open source for Windows XP?
  With respect,
  Rachid Purakait

  It is not open source, but it's free:

  Microsoft Security Essentials:

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

• HP Open-source drivers/firmware (for Windows)?

  I found the HP has open source drivers for Linux systems.

  http://hplipopensource.com/hplip-Web/about.html

  Drivers of Windows/firmwares are also available as open source?

  It would be great, if they were (because I had a lot of problems with them in the past), but I couldn't find the source anywhere.

  I think that the users and HP could benefit a lot if the community could help pilots better and more user-friendly.

  Andras_Fuchs, the answer is no, we don't have a free software for our printers. Is it possible to change the software - Yes, it is. I can personally recommend this because I do not know the ramifications of such action myself.

  Also, these drivers are available for the basic software edition (major patches) because it's open source, programming of entry that matches the OS is very difficult, that is why we cannot guarantee the functioning of drivers if the BONE is altered.

  I hope this information is useful!

• English (Singapore) on Window XP SP3 - CRM outlook client cannot connect to the CRM system

  original title: English (Singapore) on Window XP SP3

  We have an error on the CRM. CRM outlook client cannot connect to the CRM system. This question because of the language English (Singapore). We cannot locate region & language English (Singapore) on Window XP SP3.

  Hello

  ·         Do you have English (Singapore) installed on the system?

  ·         What exactly are you trying to do?

  ·         What is the exact error message, are you trying to change the system language to English (Singapore) or what?

  ·         What version of the Microsoft CRM client is installed on the system?

  To access the parameters of language and the region on the system, I suggest you to check the below link.

  Regional and Language Options overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  I suggest you to post your query in then the link mentioned below.

  https://community.dynamics.com/product/CRM/f/117.aspx

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I connect my Canon camera, wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera wizard.

  original title:wiaacmgr.exe

  I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera.  My problem is almost the opposite!   Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start.  But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use.  If I close the window...  Not much, but it's a nuisance.  I would be happy if she has proposed to launch work stations.  I then click on the box "Make this every time" and will never see the window.  Otherwise, I'd be happy to remove the program completely.  Can someone tell me how to achieve one of these?  S ' Please!
  Jim

  Hello

  I suggest you to return the item and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See also:

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

• I'm opening a Windows Live Messenger email account different everytime I try to connect I get WE cant connect to messenger due to the error Code 80048821

  How to get past error Code 80048821 for a fool to count

  I'm opening a Windows Live Messenger email account different everytime I try to connect I get WE cant connect to messenger due to the error Code 80048821. I'm a fool to computer I have not a clue as to what the words mean. Or how to follow instructions for geeks or people who understand computers. Sorry but people there are still a lot of people in the world who do not understand the computer speech. Can you help me Mx Easom

  Hello MaxEasom,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.