Open Subvi front shows its current state

Similar Questions

• from the opening, does not show the current date, need to manually refresh the page

  initially the opening firefox, it does not reflect the current date. I have to refresh the screen to go to the current date.

  This has happened

  Each time Firefox opened

  is past week or two, cause unknown

  A possible workaround is to use to remove the navigation, search and download history on Firefox to clear the cache of the browser on the output. That will make Firefox load pages from the server instead of using the version in the cache.

• SAP ER progressive reconciliation - current state = data received

  Hello
  We use the connector SAP ER for SAP HR Trusted Source of reconciliation.
  
  Full reconciliation works, so we went to a progressive reconciliation.
  
  The IOM job named "SAP HRMS Listener" is enabled and active (in other words, what IMO is listening on the TRFC Port of SAP HR system).
  
  Question: when the SAP administrator hire an employee on the system SAP HR, IOM correctly receive the transaction (which means the communication between the work of SAP HR and IOM as exceptees) and create a new event of reconciliation, but this event remains "open" without error and with current state = received data.
  
  Note: no messages in the weblogic_oim.log file and no error in oim_server1 - diagnostic.log.
  
  Kind regards
  Gabriele

  Hi Gabriele

  Check the property of lot size system. Only after that the number of events reaches this number, your recon events will be processed.

  Please run the scheduled task "Unplanned Recon batch" to deal with the events of recon immediately.

  Let me know the results.

  Concerning
  user12841694

• Open and close the Panel the Subvi front

  Hi all

  Run LabVIEW 2011 on Windows 7 x 64.  I am trying to get a Subvi front to open from my main PC with the touch of a button, then close with a button press in the Subvi.  Here's the piece of my main FP who calls the VI and opens the FP

  Locations is defined in another loop and all loops are in a flat order.  I made this way because I want to start with the first press and not stop my main loop to run.  So I don't know if I can run in the same line as the event or not, I've moved the element to the left loop around a lot.  Anyway the VI of openness seems to work very well.

  The problem arises when you try to close the Subvi for the SECOND time.  The code is here:

  

  As I said, the first time I open and close the VI everything works as it should, hopefully.  Then, I am able to reopen but now 'empty' button does not work and I can't close the window or even to open the block diagram to probe anything.  I tried to understand this point for a while, any insite would be greatly appreciated!

  Thank you

  Found my problem, I had the wrong boolean on one of my other events.  If this seems to be a good way to open/close a Subvi if anyone is interested!

• Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How to maintain pointing a button state, while it is in its current page?

  Hello

  I'm just a beginner in actionscript 3. I have this code on the navigation using the movieclip buttons. I just did the currently selected button disabled when it is in the current page, but I can not just know how to keep it in its stationary State (he keeps returning to its normal state). Any ideas, your help will be very appreciated. Thank you.

  Here is the code I wrote on the first frame of the timeline (scene1) main, I have 4 buttons namely mcButton1, mcButton2, mcButton3, mcButton4 and 4 images labeled page1, page2, page3, page4. :

  var page: String;

  var btnArray:Array = [mcButton2, mcButton3, mcButton1, mcButton4];
  var pageArray:Array = ['page 1', '2', 'page 3', 'page 4'];

  for (var i: int = 0; i < btnArray.length; i ++) {}
  btnArray [i] .buttonMode = true;
  btnArray [i] .addEventListener (MouseEvent.CLICK, onMouseClick);
  btnArray [i] .addEventListener (MouseEvent.ROLL_OUT, onMouseOut);
  btnArray [i] .addEventListener (MouseEvent.ROLL_OVER, onMouseOver);
  }

  function onMouseClick(event:MouseEvent):void {}
  for (var i: int = 0; i < btnArray.length; i ++) {}
  If (event.currentTarget is {btnArray [i])}
  btnArray [i] .mouseEnabled = false;
  page = pageArray [i];
  Play();
  }
  else {}
  btnArray [i] .mouseEnabled = true;
  }
  }
  }

  function onMouseOut(event:MouseEvent) {}
  event.currentTarget.gotoAndPlay ("out");
  }

  function onMouseOver(event:MouseEvent) {}
  event.currentTarget.gotoAndPlay ("over");
  }

  use:

  var lastClickedButton:MovieClip;

  var page: String;

  var btnArray:Array = [mcButton2, mcButton3, mcButton1, mcButton4];
  var pageArray:Array = ['page 1', '2', 'page 3', 'page 4'];

  for (var i: int = 0; i< btnarray.length;="" i++)="">
  btnArray [i] .buttonMode = true;
  btnArray [i] .addEventListener (MouseEvent.CLICK, onMouseClick);
  btnArray [i] .addEventListener (MouseEvent.ROLL_OUT, onMouseOut);
  btnArray [i] .addEventListener (MouseEvent.ROLL_OVER, onMouseOver);
  }

  function onMouseClick(event:MouseEvent):void {}
  for (var i: int = 0; i< btnarray.length;="" i++)="">
  If (event.currentTarget is {btnArray [i])}
  btnArray [i] .mouseEnabled = false;

  lastClickedButton.gotoAndPlay ("out");

  lastClickedButton = MovieClip (event.currentTarget);

  page = pageArray [i];
  Play();
  }
  else {}
  btnArray [i] .mouseEnabled = true;
  }
  }
  }

  function onMouseOut(event:MouseEvent) {}

  {if(lastClickedButton!=Event.currentTarget)}
  event.currentTarget.gotoAndPlay ("out");

  }

  }

  function onMouseOver(event:MouseEvent) {}
  event.currentTarget.gotoAndPlay ("over");
  }

• Sub - VI does not open (error 3 could open the front panel)

  I work for the VI (the version of Labview 2011 trail), I created a Subvi. At the same time, I opened this Subvi to adjust terminals connection - what I've done before - and after saving the file and its closure, the Subvi is remained unadjusted. In fact, I am not able to open the Subvi more. And when I want to open the file in a VI (e.g. running VI in windows), I get "' load the error code 3: could not open the front panel." "

  I can't also preform any task for example the recording of the main program for an older version, because this Subvi is present in the program.

  Nevertheless, the VI still works as a Subvi in the mainprogram I wrote - in how it worked until I adjusted the connection terminals.

  Is it possible to solve my problem without having to rewrite the entire Subvi? The Subvi about is attached in this post.

  I thank in advance

  PS. After the closure of Labview, it sends an internal report of the caveat.

  Hi all

  I added this issue to an existing bug report (what we call a request for Corrective Action); There was one reported with Labview 2010. I added this matter to him. The reference of this application is CAR #251753. With this reference, you can always ask the status of this bug report.

  Best regards

• Cannot change the sidebar of windows to its transparent State

  Original title: Customize windows sidebar

  I can't return my sidebar of windows to its transparent State. It is now opaque and a distraction. How can I make transparent again?

  Hi Bhoionbykke,

  1. who is the edition of Windows that is installed on the computer?
  2. don't you make changes before the show?
  3. what exactly happens when you customize the sidebar?

  If you use Windows Vista or Windows 7, then we recommend you to make a right click on the sidebar and change its opacity.
  See Customize Windows Sidebar

  Also run convenience store Aero and check the result (if you use Windows 7)
  See Open the Aero Troubleshooter

  For Vista, see , solving problems with Windows Aero

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to bring back the .dll files to its original state?

  Hey there's good people!

  Today by chance I opened a DLL with notepad now all my files are changed in the Notepad file. How can I get my dll file returns to its original state on how it was before? Where I could see the two bolts of small image on each dll file?

  Thank you very much!!

  0ne love

  Vally Pally

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Move the slider to its current location with the Windows Vista speech recognition?

  How is a moves the cursor from its current location with the Windows Vista speech recognition?

  What is happening with this example?  -What are you talking about?

  "You must get the cursor in front of the word 'harder' by saying 'Move to harder' and then say 'open quote', then move it to the end of the strongest with 'move after harder' and then 'close quote.' »

  Vista speech recognition
  http://www.ExtremeTech.com/Article2/0, 2845,2109977,00.asp

  Is there something to this?

  "You can move the cursor anywhere on the screen and tell your mouse to"Click". This, together with the mousegrid. Say:

  MOUSEGRID. "

  Transcript of speech recognition demo Windows
  http://www.Microsoft.com/enable/demos/windowsvista/trans_speech.aspx

• Hi, I inserted my USB key, but it does not open because it shows the shortcut symbol

  Hello

  I inserted my USB on my pc, but it does not open because it shows the shortcut symbol and I also tried another

  pendrive.it too do the same (does not open) I also scanned the computer, but it shows no virus.

  What can be the problem.pls help me recover from this very urgent problem.its

  Hi Arul,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you are unable to open the USB on the computer.

  I would appreciate it if you could answer the following questions to help you best:

  1. the pen drive recognizes on the computer?

  2. what happens when you try to open the USB?

  3. do you get an error message?

  4 have you checked the question in different USB ports?

  5 have have there been recent changes made on the computer before the show?

  This question could be corrupted USB drivers. Here are some methods that you can try in order to solve the problem.

  Method 1: Run the hardware and devices Troubleshooter and check.

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  a. click Start, and then type Device Manager in the Start Search box, and then click Device Manager.

  b. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  c. Once complete, restart your computer. Your USB controllers will automatically install.

  d. check the issue.

  For more information, see the link.

  Updated a hardware driver that is not working properly

  If the problem persists, or you have questions about Windows Media Player, do not hesitate to let us know. We will be happy to help you.

• vmrun start leads to a "error: operation failed because of the current state of the system.

  Hello

  I am running the vmrun like this on the console command.

  / usr/bin/vmrun t CR h https://ourhost/sdk u ouruser Pei ourpwd start ' build001/build001.vmx [datastorename] '.

  I get the error text:

  Error: The operation has failed because of the current state of the system
  

  When I opened the Vsphere client, I see that the operation began, but also with an error: the operation is not allowed in the current state.

  I'm running on VMWare Vsphere Server Version 4.1.0 Build 258902

  How can I make sure via command line that the State of the system is correct. Is there a way to get corrected through an order status?

  When I try to power to the top of the image within the user interface, it works, but I need to know the opposite effect.

  Thank you.

  Hello and welcome to the forums.

  check via the State of the line of command of this virtual machine if necessary, unblock the process using vmsuport x how to show in this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004340 Ko

• Reference to the control on the main façade fails the Subvi front is closed?

  Hi all

  I meet a strange bug. In my code, I use a Subvi to control a piece of hardware. The Subvi has commands for all functions of my hardware.

  I changes the value of one of these controls in my main façade by running a reference to a button on my main façade in the Subvi, grabbing the value of the button with a property node, then update the value of the Subvi control using a node property signage.

  This works very well when my Subvi front is open, but does not work the Subvi front closing.

  I am new to labview, so any help is appreciated.

  Thank you

  Rachid

  This event triggers a series of writing for the real hardware. The material is sent only a command when something changes.

  My code is made up of handlers inside functional global variables. In this way, I can send different parts of code of different orders (example: reset and reset) with the events generated by programming.

  The value of the wheel of the page main itself, according to my probes, getting through. It's the Subvi button that is having a problem.

  I work under a certain pressure of time pretty important, so I managed to convince the boss that the front panel of the Subvi open does not violate the requirements of the application. I guess this has solved my isse.

• In front if I did wee one button, I have to open another front

  My question is the façade in LABVIEW hand, if I press a button, I have to open another front...

  Is this Possible?

  Thank you

  Double post.

  anyway. Find three attachments.

  Main.VI: Run the vi. Press "open Subvi.

  "" Sub vi.vi: this vi will open when you call him vi hand by "opening Subvi" button.

  Third attachment is an image.

  Place your Subvi (Vi whose façade to be opened by a button click) on the block diagram of main vi.

  Right-click on the icon of the vi, you get this pop-up, select the two options as shown in the picture. Run the main vi.

  I hope that now you can reach your goal.

• Factory reset for Windows 7 will restore my BIOS too to its original state when I bought it?

  I now use Windows 8, I bought my laptop in JULY 2012. It came with Windows Home Premium and I have the recovery disc for Windows 7. I intend to factory reset my laptop because of my disappointment with Windows 8 and supprt for Windows 8.

  I want to know if the "factory Reset" will restore the BIOS of the laptop in its original state. I mean I have my BIOS set to update to the latest. I want to return to its former State. How long is the factory reset also takes? I own edition HP DV6T Quad 7000 with 32 GB WSSD.

  Intel RST does not have anything, my HARD drive is shown in non-RAID and there is no way I can change it to RAID. My last option is to try the Factory Reset and see if it helps. I'm sure that TSRI will work if my BIOS is restored to the original condition with everything so it starts to detect my HDD in RAID.

  Hello

  A factory image recovery will not affect the version of BIOS or current settings. The duration during which the factory image recovery takes wil depend on what type of recovery media that you have. If you have a usb recovery media that it will probably wait maybe thiry minutes. Use you a recovery value disk while recovery might take a few hours to complete.

  Once you start the recovery not to touch the keyboard.

  Make sure that the wireless is turned on before commit you to the recovery.

  Best regards

  ERICO