Operating repair of windows CD installation problem - win 2 k 3 Dell poweredge servers

Similar Questions

• Satellite L300 - perform a repair of Windows Vista installation

  Hello
  I have a Satellite L300. I have NO dvd of windows vista, the seller told me that the dvd of windows found in the pc.

  Now I have to solve a problem of windows update (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I do not know how to perform the steps in method 3, because I don't have a vista dvd.
  Can you help me???

  * Method 3: perform a repair of Windows Vista installation *.
  * When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.*

  * To perform a repair of Windows Vista installation, do the following: *.

  * Restart the computer
  * Insert the Windows Vista DVD in DVD of the computer dur.*

  * Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the search box, and then click Configure in the list programs. Then, click install maintenant.*
  * Click go online to get the latest updates for installation (recommended). *
  * Insert the product key if you are prompted for it.*
  * Click to accept the Microsoft software license terms
  * On the type of installation you want screen, click Upgrade.*
  * When the installation is complete, restart the computer and try again to install updates again.*

  Hey,.

  I m a bit confused now
  What exactly happens on your laptop? You can start Windows?

  I think the article MS says it all: to repair Windows you need a disc of Microsoft Vista.

  Alternatives to reinstall the entire system use the Toshiba recovery disc that contains a picture of the factory settings. Have you created this disk?

• When you try to run a repair of Windows XP installation I have no option to select R for repair.

  original title: installation of xp home repair

  I'm doing a repair of XP Home installation, but I don't get the option in the settings to select R to do the repair install why is - this? Is there anything we can do about it?

  Hi CharlesQuagliata,

  • What type of Windows XP CD you use to perform the repair facility?

  Check and make sure that you follow the below method to perform the repair installation on Windows XP.

  To perform a repair of Windows XP installation

  (a) Insert your Windows XP CD into your computer.

  (b) restart your computer. If you are prompted, press a key to start from the CD-ROM.

  (c) when the Welcome to Setup page, press enter on your keyboard.

  (d) on the Windows XP licensing agreement page, read the license agreement. Press the Page down key to scroll to the bottom of the agreement. Then, press F8.

  (e) when you are prompted, press R to have Windows XP try to repair Windows by reinstalling important components of Windows.

  The relocation and repair process may take more than an hour. Finally, the installation program invites you to answer the questions as if you were installing Windows XP for the first time.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Trying to install a new installation of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes.

  win xp install

  Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX marty

  Thank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty

• Buy a windows server license R2 ROK 2012 for a Dell PowerEdge 2950 bought in 2008 [MS]

  Hello

  I have a Dell PowerEdge 2950 with windows server 2008, I bought it in 2008.

  I want to upgrade to the new windows server R2 Foundation, purchasing a license ROK 2012.

  Is this possible? Where can I buy one of these?

  Thank you

  OTO Tortorella
  TeleType.it
  
  

  Buongiorno,

  He endured of Poweredge 2950 come sistemi al massimo do it 2008 server (even he 2008 r2).

  Speaking saluti

  Manual

• Repair Windows 7 installation problem

  I want to try a repair installation on my computer running W7 Pro x 64 SP1 to see if it will solve a problem that I think is related to a problem with the OS.  I have a version of Windows and a valid product key, activated.   I have my original W7 install disk (it was actually an update of XP) as well as a separate drive that is the update SP1 of W7 (NOT an installation disc).

  Despite having valid keys, I am unable to download the image of recovery of Microsoft software, receiving a message that the language is wrong and that I should choose another language.  I went to tech support and they said it was because the product key was used 20 times - I only used it once, and it was obtained directly from MS during a support for the problem to upgrade installation.

  In any event after hours of troubleshooting including calls and conversations and an initial statement that my only recourse was to buy a new key technical support referred me to MS shop, telling me that they would give me a new key. After more chat, the MS store tech referred me to the reception of the answer; so, after hours of support not I dropped.

  With the resources I have, is it possible that I can build a drive that I can use to repair/installation, without having to download a picture of MS?

  Well, more hours on the phone with various divisions of MS support and FINALLY got someone who gave me a link where I could download an ISO of Win 7 Prof x 64 legitimate, installable to my system.  It took many more hours than I would have had to spend, this copy is legitimate, but, at least, I can now use this to do a repair/install of my dysfunctional W7 program.

• Try to do a repair of Windows 7 installation, receive the message error "the following problems prevent upgrade Windows"

  Hi, I got problem with IE 9 RC.  I posted here, but there is no solution! (I can't send mail to Hotmail).

  I tried the final version of IE9, but the problem didn't slove. I tried to fix the Win7 + sp1 (upgarde) but it shows me this message:
  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue.
  Your current version of Windows is more recent than the version that you are trying to level to. Windows is unable to complete the upgrade.
  Windows needs to be restarted if necessary to system files can be changed before you continue.
  The upgrade of Windows will affect the following programs or devices:
  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  USB Virtualization: Stub virtualization USB driver
  These programs may not work properly after the upgrade. We recommend that you uninstall these programs before upgrading. Cancel the upgrade, open Control Panel and search for "uninstall a program". (Note: programs marked as * can be reinstalled securely after the upgrade.)
  Age of Empires III
   
  and thank you.

  I tried wake SP1 with windows installation, but it did not work, I installed clean.

  Thanks to you all.

• Windows xp installation problems

  Unfortunately I have no error message as such, first of all the toolbar menu bar and start disappeared in an irreversible way, at the same time that no executable programs would work, no sound would not play and only internet browser as well as wading through my folders and files was the only operational things. After an attempt to remedy this situation, I was told (online) to reinstall windows xp, this seemed an idea without danger at the same time, as I did before attaching unrelated problems, however, when reinstalling (or should I say before installation was complete) in one of the many process, the pc would restart and get to the device registration screen , from there, it's been jammed indefinitely, and flashing icons of many colors and forms have appeared and in some cases, replace a word or a number. (placement and Visual icon seem to be completely random)

  I also read (before attempts to reinstall) it could be a malware problems, well that sounded rather difficult for me, as the malware program would not start let alone clean all the above questions. I have redownloaded malwarebytes and again, unsuccessfully, to get any .exe program to initialize even. An error appeared in keeping it (unfortunately silly me, I had not planned this far ahead and has not copied the error name/numbers)

  I have tried many various difficulties through the system recovery and repair, but without success, I know it's not good to go, but any help at all would be greatly appreciated.

  * note * my usb ports are both issues and was not able to get the most recent of my files on an external hard drive etc, I would really like to come out of this with my hard drive in tact.

  Alternatively, you can attach your hard drive as 2nd drive or slave for other PC work and then just copy the data off the coast.

  Because of the strange characters and colors I would always start the recovery console

  Unfortunately it did not work and the same colors and icons appeared at startup boot via the controls proved to be without success either.

  I have yet to try this another recovery disc, I'll try that now, other then that, it seems that it would be a fixed format.

  Respectfully, that you try many different things absolutely without success. I encourage you strongly to create this live cd, following the instructions on the link in my previous post, recover your files, reformat, re-install and do with it.

  Any method allows you to retrieve your files get and do. You have re-installed windows 10 times since your first post and have been without headaches. It's just my recommendation of course.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• repair a Windows 7 oem, with win 7 retail disk

  Hi all

  our dell workstation has a loop when starts up after a power failure: raid 1 with intel it'ok, Member of disc 2 are green, post OK, windows starts with the logo, but after a few seconds, the blue screen and reboot ever, claim compensation... not possible to auto repair.

  the COA said... Dell Windows 7 Professional OA so I guess this is an OEM installation with preactivated license, we have no dell installation dvd disc and we do not have the time to ask him to support, we must return to production if it is possible with a REPAIR not a facility CLEAN, then YES only with iso downloaded from retail to your links.

  I also tried the first solution, same question:

  last knon good congiguration.

  safe mode,

  repair online of F8 and startup repair, online and system restore also the chkdsk command (I see System D partition so I can access disks seems are ok, like raid 1)

  Start with vga... .Nothin same issue, to the point of boot. We will also try to "disable automatic restart after system failure" to see the blue crash error, but I think that the latter is a REPAIR of a win 7 pro x 64 retail dvd offline, I downloaded your link and burn it.

  MY QUESTION:

  If I boot in detail don't drive not oem dell disk and I try INSTALLATION offline repair, after this test, a start-up repair and select the system partition, if the pc starts OK, must reactivate my copy of windows? or the file with other files local license certificate OEM Dell is deleted?

  If YES, all ok, but I have to activate again my win 7, can I do that only with the product code to change with my phone COST and MS? or I need to install my dell with slmgr.vbs certificate first and THEN change product code with key COST? So the question is WHERE can I find this backup file?

  and if restart fails too, you can also try the system restore of the retail dvd, what about activating windows in this case?

  Another suggestion if everything breaks down?

  Thank you for your attention

  See my Windows reinstallation Guide / a Clean Install of Windows 7: http://en.community.dell.com/support-forums/software-os/f/3524/t/19480753.aspx

  You can use the retail .iso image file to try a repair installation if it works you should not be prompted to activate the product.

  If you perform a new installation, you can do this by using the retail .iso image file, in this case, you will need to enter the 25-digit number on the COA product key and activate it by phone to Microsoft. The guide provides complete instructions on how to do this. In the worst case that you can not activate your product at all that you can use a non activated version of Windows 7 as a 30 day trial, which should be ample time to ask the DVD from Dell.

• iMac 27 end of 2012 windows 7 installation problems.

  Dear Apple community.

  First of all I know that the topic was discussed a few more times, but after I tried to follow the instructions and directions and patterns almost everywhere on the net I am a blind spot.

  I have an iMac 27 "end 2012. I managed to install Windows 7 with Bootcamp through a combination of different methods, on line. (downloaded the Bootcamp Support 5.1.5621 software as described in many forums)

  But I am stuck because I always have problems with my UBS3 ports that do not allow my keyboard and graphic tablet to work (I had to uninstall the app in safe mode to return to UB2) and the resolution of the screen that is only 1280 x 720 at the arrow, trash and other stuff that appear distorted.

  Since I'm on some architecture and 3D modeling programs in Windows I want to ask for help because I don't really know where to look further.

  When I solve the problem, I promise to write here a detailed method to install win7 on iMac late 2012 for those in need.

  Can anyone help me to finally get a solution? Thanks a lot for your time and looking forward to hear that here you.

  Hi Polfus,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your Boot Camp installation. If you continue to have unexpected behavior of port connections and display resolutions in Boot Camp, you can find the troubleshooting steps in the following article useful (my apologies if you've seen elsewhere / fact them):

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

  You can also check that you are running the 64 bit version of Windows 7, as shown here:

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Concerning

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Windows Update installation problem

  When I turned off my laptop Windows Vista Home Premium, the system entered into mode "install updates". It has been the installation of update 3 of 8 for more than an hour. The display does not turn off and unplug the machine. The disk led is on continuously.

  Do I have a problem? Should what steps I take? Thank you.

  Hi jayalan,

  Welcome to the Microsoft Answers site!

  The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

  Once done with the step above after starting the computer on the desk. I suggest that reset you Windows Update components and perhaps that should take care of the updates. install the updates by selecting two both than some updates system needs to reboot for the changes to take effect.

  Access the link below to reset the Windows Update components automatically.

  http://support.Microsoft.com/kb/971058

  If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. Once you are in the office, do a system restore which will take the computer to a time where it was working fine.

  Go to the link below for the procedure to start in Safe Mode and system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Let us know for if you are unable to boot to the desktop or to get help.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.