operating time

Similar Questions

• operating time of virtual machines

  Hello

  I went tho a lot of notes. as

  Get-VM-location xxx | `

  where {$_.} PowerState - eq "Receptor"} | `

  Get-Stat - sys.uptime.latest Stat - MaxSamples 1 - in real time. `

  Select the entity,

  @{Name = "Start";

  Expression = {(get-date).} AddSeconds(-$_.value). ToString ("yy/MM/DD hh: mm :")}} | ") export-csv c:\temp\sf-Pete-VM-uptime.csv

  	$report = @)
  	Get-VM-location xxx | Get-View | %{
  	$row = "" | Select name PowerState, LastBoot, LastSuspend, TotalSuspend
  	$row. Name = $_. Name
  	$row. PowerState = $_.runtime.powerState
  	$row. LastBoot = $_.runtime.bootTime
  	$row. LastSuspend = $_.runtime.suspendTime
  	$row. TotalSuspend = $_.runtime.suspendInterval
  	$report += $row
  	}
  	$report

  But they do not work...

  Someone has a final script & work, to get the time of operation of the virtual machine?

  Thank you

  You can also use something like below, requirement is VMware tools should be present on requested VMs, you require the same username password for windows and also have on the root of Linux or any other username password must be the same., it will directly pull Uptime and distribution of inside the virtual machine.

  $report = @)

  Get - VM | Where-Object {$_.powerstate - eq "Receptor"} | {ForEach-Object

  $os = $_.extensiondata. Guest.GuestFullName

  If ($os - matches "Windows") {}

  $test Invoke-VMScript - VM = $_ - ScriptText "(Systeminfo) [11]" GuestUser - GuestPassword - password for user domain\username

  $test = $test. ScriptOutput-replace ("starting system:", "" "")

  }

  else {}

  $test Invoke-VMScript - VM = $_ - ScriptText 'uptime' GuestUser - Root - GuestPassword password

  }

  $row = "" | Select Name, distribution

  $row. Name = $_. Name

  $row. Boottime = $test

  $report += $row

  }

  $report

• Satellite Pro L550-17R - battery operating time

  I am looking to buy a Toshiba Satellite Pro L550-17R. I'm afraid that the battery life is not enough for my needs. I looked at the option part: -.
  Battery high capacity - Li-ion 12 cells 9000mAh PA3727U-1BRS.

  Does anyone have an idea (realistic approximation for average use) how long the run time would be with this improved battery used in conjunction with the specified model laptop?

  Thank you.

  G.

  Hi mate,

  I think that it of quite difficult to say something about it. Remaining time depends on many factors:
  -Screen brightness
  -The software you use
  CPU usage-
  -etc.

  But I think a battery 12 cells should give you a good time. As far as I know this would be the maximum of cells at the moment.

• How to measure my each operating time blocks

  Hi, guys

  I will measure my each main blocks, duration, are totally five large blocks in my final VI, the last four of them were in a while loop

  Thank you

  What exactly do you mean by "block"?  Is this a Subvi, primitive LabVIEW, a piece of LabVIEW code?

  You can use several functions of number of cycles.  If you put your code in a flat sequence structure with Tick account in settings in the meantime, you can subtract the values from each other and to relative time of each piece of code.

  Why are you worried about the execution time?  Problems of particular clock?  Most of the LabVIEW primitives will run so fast, you'll probably see no or very little change in the number of cycles before and after them.

  Here is an example to show how measuring the execution time for a section of code.

• Internal operating time

  What are the temperatures that are acceptable to the GPU and the CPU? I have a CPU E5300 and a processor Nvidia 9500 GT graphics. I only use the GPU for purposes of multi-monitor. I'm writing this, shows 49 oC, EVGA precision with a speed of 70%. PC Wizard displays a CPU of 19 ° c temperature, with hearts of execution of 32 and 26 oC repsectively. What is a good/bad range? If not, what should I do abot it? (BTW EVGA shows about 46 to 50 oC at any speed of 50 to 100 %.) fixed fan  TIA. WalterL

  Hello

  All those who are within a reasonable range. Those who are really nice time CPU. GPU is made to run much hotter than this.

  Then... relax.

  Kind regards

  ERICO

• Virtual computer repair operation time-out period

  Afternoon everyone,

  After you run a recovery test, some VMS in the placeholders on the recovering site have not been restored. They´re that appear as unavailable virtual machines, always pointing to the instant data store (which no longer exists) and so on.

  This date marks the respective virtual machines in groups such as the need to repair (not very many, only 7).

  I clicked on the button fix everything and let it run... but what is happening now for nearly 48 hours and it won´t I would like to cancel the operation.

  What should I do?

  Restart vCenter and MIS services.

  Unsubscribe VMS pointing to non-existent LUNS.

  Rescan HBAS.

  Try the repair option again.

• Mainenance mode - operation times out when VMs powered - HA question?

  Hello

  I want to update our two guests to esx server 3.5 with Manager running on vCenter 2.5 update. (Mamaged through the Infrastructure Client 2.5)

  On the two hosts vm is turned on. When I start sanitation on the single host an error occurs (operation timed out). When I set up the answer for the failure to "Power Off and try again" the powers of the host in the broad all VMs and update work.

  My question is: shouldn't the host use HA to turn off the virtual machine, move them to another host and turn it on again? Or vMotion is required for this operation?

  I forgot to ask you one thing, you play with setting HA? (Leave the machine market, stop, stop). This could be a different result!

  Should move the virtual machine automatically with vMotion & DRS

  System engineer

  Zen Systems Sdn Bhd

  Malaysia

  www.no-x.org

• Operating time of game bar

  I am using Captivate 5 on a Mac Pro 5.1. If you look in the Table of contents, obviously see you in the current time of your presentation and the total time, but anyway are also having this information above the PlayBar? I want to keep my OCD hidden, but I didn't know if there was anyway to insert execution times on or around the game return fast/fast-forward etc buttons. Is this possible? How?

  Thank you

  Mike

  Hello

  If you don't have any break during the file, the time as shown in the table of contents is also the real time, but is not very common. If the user clicks on the bar reading some button the real time will NEVER be the time because it is calculated from the length of the slide. I hope that you realize that! If you have a PlayBar, the user has a large number of control, can pause, rewind, go to the next/previous slide.

  You can easily add the variable v_elap (or v_elap_min) and v_total (or v_total_min) in a text caption that position above the playback bar. But what I explained, is that it is not possible to have the minutes and seconds, or you have (decimals) minutes or seconds. What you want is currently impossible in Captivate if you do not want to use the table of contents or write a widget yourself of the written by someone else. I explained what is possible within Captivate.

  And it starts automatically if you read the post. Rewind is also possible, if initialize you variables of new him reinstating the first slide.

  Please, pay someone to create a widget for you. Flash what you ask is easy to do in Captivate I offered you what is possible, after all this is the forum of Captivate.

  I just hope that the time I spent on the creation of this blog will be useful for other users.

  Lilybiri

• AMT: operation time out when you try to debug via vs2005 Server Explorer

  using v110621 of ODP.net
  
  I have a valid connection to an oracle 9i DB. If I set a breakpoint in a stored procedure then click right sp in Server Explorer and to "start debugging".
  
  the immeadite window reads: -.
  
  The PL/SQL debugger starts.
  PL/SQL Debugger is listening on the port 49152.
  The database cannot connect to the PL/SQL debugger.
  Ends of PL/SQL debugger
  
  I get the following popup error message
  
  Server Explorer
  
  An error has occurred during execution of the procedure/function:
  ORA-30683: failure connecting to the debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  
  So im not sure what I should be specifying where to the debugger attaches?
  
  found this on the cshays blog, but I still don't understand if its something that I need to define locally or on the server?
  http://cshay.blogspot.com/2006/10/debugging-PLSQL-from-ASPNET-and-Visual.html
  
  Any help is greatly appreciated.
  
  See you soon

  In my case the problem was caused by multiple NICs on my development machine.
  ORA_DBMS_JDWP has been set at ip_address of wireless adapter which was on the other network segment as the oracle server.
  Rotation of the wifi adapter and then restart visual studio solved the problem.

  If you are using vmware workstation that ora_dbms_jdwp can also be assigned to the IP address of the virtual map of vmware.

  Sebastian

• Reduce the operating time

  Hi, is it possible to make the following codes to run a lot faster without changing too? The goal is in the code.

  OK, looking at the code, you seem to use the sieve, but there are a lot of very inefficient buildings.

  Here are a few ideas:

  • To find the first digit different from zero, there is no need to rattle on the table in its entirety in a loop just to look for the smallest index, simply use table research and research for REAL. No need to loop. You can start searching for the last position found, no need to search the position 0.
  • Instead of squaring for the condition of the root square before the loop end loop, and compare without squaring
  • There is a primitive for "+ 1".
  • Do not autoidex on the edge of the loop, you can carry the cumulation in a shift register.
  • Except for the 2, you can make the table with only odd numbers.
  • You don't need to do the research in the inner loop. The indices to be reset can be calculated from first principles. even the number of replacements can be calculated, so you can use inside OF the loop. It would be easier to design the initial table, if the value is the index.
  • ...

• Time of operation or availability of a platform and a server

  I would like to control the availability of a platform (like linux box), but DO not quite understand how the availability.  How to follow a "platform"for uptime. " If I use the agent and show its availability, which may NOT be the same as the availability of a platform if for some reason the agent has not started.
  
  In the same spirit, I would like to monitor availability in percentage for a web site. What is the best way to do it?  Should how much I follow? Once again if the agent falls down and does NOT start the % OPERATION time for the web site is going to be affected and show more downtime if the agent is NOT running... It seems that everything depends on the precision agent running.
  
  Also:
  
  1, are how long the saved data for the monitoring of availability or
  Web access. Is - this configurable? \
  How can I know how much I have left of disk space or the room in the postsql internal datbase? Where to look for it?
  
  Post edited by: hypermike

  If the customer (agent) is down, then the server will consider the platform as being down.

  It's a little hard to answer your question about how long the data is kept.  Compress us the data and store min/avg/max on windows in different tables, each in different range and size of the window.  Overall, the oldest data in the central administration will be eliminated after 1 year.  This is configurable in the database.

  You can check the space by monitoring the database used by HQ :-).

• Control the simulation time to align the time system

  Good so maybe it's blindingly obvious or just simply a ridiculous question but here goes:

  I run a dll that I produced from a .mdl file. My goal (among others!) is to get the dynamic response of the exact model of 'real world' calendar (date system). The tuning for the appearance of the control of this model is based on the duration of simulation with produced in simulink and so it is desirable for me to define the duration of the simulation to run when the system.

  The problem I have, if you open the workspace and produce a template control, the simulation shown time is much faster than the time system.

  For example, one iteration of the model takes a fraction of a second. What I imagine happens, it is immediately restart (and progress of a time step). I guess I want the model to wait until it is in harmony with the system time before iterate again.

  Is there a way to solve this problem, and do anyone know if this problem will be resolved in Simulink or Veristand 2009.

  Any information would be appeciated, my trawl of the help files OR have not really answered the questions yet good

  Thank you
  James

  The models are running in sync with the rest of the system. Unless you specify a decimation factor for your different model of 1 for each tick of the primary control loop your model put once, too. The difference between the model and system duration that you see is due to the fact that the model time is based on its time not Delta T compiled, not any of the wall clock time. Every time that the model is Ticktock, it adds its own Delta T to its operation time string.

  The time channel system is based on the Delta T of the primary control loop. Thus, it corresponds with the rate you specified the system to run at. If these Delta Ts are the same, are aligned at the same time. If you want the time to model to match an actual wall clock time, you can adjust the flow of the loop of the primary control loop to match the Delta T, or adjust the factor of the decimation of the model so that it gets only checked once for every N the primary control loop iterations.

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• Unable to locate labview run time engine

  Hi all

  I have a problem while trying to run a simple labview software on a Tablet PC.

  My development machine is under win 7 64 bit with labview 2010 sp1 10.0.1

  My computer is a win 7 32 bit based tablet.

  I installed labview runtime engine TEN 2011 standard 32-bit sp1 but I get the following text: «unable to locate labview run-time engine...» "

  I tried to install sp1 64-bit of the 2011 standard RTE because one of the items suggested, but windows is not allowing to install 64-bit applications...

  Should which version of the Runtime I install!

  You did not say, but I'm assuming that you are using LabVIEW 2010 sp1 32 bit to develop and build the application.

  You can include the 2010 sp1 Runtime when you build the Setup program, or you can download it (here) and install it separately.

  (The runtime version must match the development system, so time to run from 2011 will not work. Even the 2010 (non - SP1) could cause problems)

  Kobi Kalif wrote:

  I tried to install sp1 64-bit of the 2011 standard RTE because one of the items suggested, but windows is not allowing to install 64-bit applications...

  Can you tell me what position suggested to install an operating time of the wrong version of 64-bit. That makes no sense at all! Please provide a link.

  (You can only install the runtime on a 64 bit OS, 64-bit, and he will agree only if the application has been developed in 64-bit LabVIEW to the same version.)

• delay in response time when answering calls so that the screen is active (xperia z5)

  When a click 'reply' during the screen is active, it fails the call as expected. It sometimes takes a few attempts. There is a known issue on Android 5.1.1 (Build number 32.0.A.6.200)

  Developer the activated options. See the option key is enabled. I can see to the touch, but answer the phone software is delayed.

  I ran the following tests:

  Operating time

  The screen locked (idle screen): immidiate response

  Screen in use (youtube): 4 keys (4 seconds) to answer or refuse

  Screen in use (whatsapp): 3 keys (3 seconds) to answer or refuse

  Active Screen (home screen): 1 touch (3 seconds) to answer or refuse

  Links: https://support.sonymobile.com/gb/xperiaz5compact/userguide/Receiving-calls/

  Is there a fix or is there an update to correct the offset.

  Thank you

  @z5_sach

  then its probably a third-party app act up