Operation of the remote instances on clustering Coldfusion?

Similar Questions

• Whenever I try to download I get this error message "a socket operation was attempted to an unreachable network. "This means that the local software knows no route to reach the remote host.

  Hi all

  I use windows 7. whenever I try to download I get this error message "a socket operation was attempted to an unreachable network. "This means generally that the local software knows no route to reach the remote host" what does that mean?  help solve this problem. Thank you '.
   
  Original title: proxy error

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories

  Hope this information is useful.

• Remote Desktop ceased operation using the enterprise 32-bit edition of Windows 7

  Hello

  Recently installed and configured Windows 7 Enterprise 32-bit on my laptop at home with great praise. Download and install all Windows updates. Currently connected to my home network with a wireless g Linksys router. I use AVG free anti-virus with firewall Windows is activated. I have a static connection to my internet and it set up locally on my machine. Port forwarding is enabled on the console of the router to open port 3389 on my static IP address. I am connected to a private network and you have configured the Windows Firewall to accept incoming connections to the RDP port on the only private networks (Public and domain are blocked by default). My remote desktop worked very well for about a week. No hardware or software changes on the laptop. I tried to connect a work day and the following error 'this computer cannot connect to the remote computer. Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer. »

  Since then, I have the router and modem power to bike. I double checked IP address external and my IP by pulling the gateway, which none have changed. No changes are made to the console of the router either. I ran the command netstat - n and port 3389 is no longer listening. I unlocked all inbound connections in Windows Firewall and disabled antivirus without success (I'm back since changes for security reasons) 3rd party. I am at a loss now to know where to check then. Has anyone else seen a similar question to mine with Windows 7 or any other OS?

  Thanks in advance for your time.

  Hi Kyle,.

  Try to clear your DNS cache and rebuild the TCP/IP stack by using commands.  Also try disabling IPv6 to see if it will help.

  netsh int ip reset c:\tcpiprebuild.log
  ipconfig/flushdns

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ColdFusion CFFTP copy of the file from the remote server and save to a local folder with the same file name

  Is it possible to copy a file from a remote ftp server to a local folder, while retaining the original file name? Please note: the file name on the remote server is not always the same.

  This article from Adobe might be useful.  (I was tempted to use LMGTFY; but I do not have).

  V/r,

  ^_^

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• MAX crashes when you try to connect to the remote server in VISA

  Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

  http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

  but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

  Hardware Dell with Windows XP Professional and SP2 computers

  The server computer has a 16 port Rocket port RS232 port Council

  I will access ports with a program written in LV7.1, but I haven't gotten that far yet

  Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

  Thank you

  CS

  Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

• NewSubproperty with a guy named the remote execution

  Hello

  I have a problem in TestSTand 4.1 with the help of the API NewSubProperty call on a remote system. I use it to create a StationGlobal on the fly with a named type. TestStand configuration is identical on both machines, and it includes the TypePalette with the type named in question.

  When you run the sequence locally on the remote computer (using the standard operator Interface), it works. When you run it under the engine remotely, it gives an error that the type is not known. NewSubProperty of other calls by using built-in types work very well.

  Any ideas?

  Best regards

  Peter

  It is a known problem that will be fixed in a future version of TestStand. Remote engine does not load files of type palette that is why the type is not found. To work around the problem, you should be able to load the pallets of type directly by calling the function LoadTypePaletteFilesEx of the remote your sequence engine API.

• An existing connection to be closed by the remote host.

  Since last week, I can't keep a connection to the server of vatsim or acars for virtual pilots micro flight simulator will for more than five minutes. the error message is that an existing connection had to be closed by the remote host

  not an expert of anymeans and all the answers I got on the net are well above my paygrade.

  Hi dva8377,

  Here are two additional methods you can try.

  1: Restart the computer by using a clean boot of the method

   

  When you start Microsoft Windows, other software may start with the operating system. These programs may include antivirus software and system programs that may interfere with the game. When you perform a clean restart procedure, you prevent these programs from starting automatically.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Method 2: Bypass the router

   

  If you connect to the Internet using a router, there may be a problem with the configuration settings, which requires that the updated settings. To determine if a network connectivity problem is caused by a bad configuration or a problem affecting the router, try bypassing the router by connecting your computer directly to the modem. Remember that this test will only check that the router is configured correctly. If the game connects to the Internet without problem when you bypass the router, plug the router immediately and contact the manufacturer of the router or your ISP for help configure the router correctly.

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  For more information, see: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• To find the details of connection of the remote user to my computer

  I want to know who is connected to my office using the Remote Desktop feature in Windows XP / Vista / windows &. is there a system where Windows saves the remote user connection logs

  Hi Roger,

  Remote Desktop connection is a technology that allows you to sit at a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location.

  If someone wants to connect to your computer, you need to enable remote desktop on the computer.

  For more information, see the links.

  Connect to another computer using Remote Desktop connection

  Remote Desktop connection: frequently asked questions

  If you suspect an infection of malicious software on your computer, see the link.

  How to stimulate your defence of malware and protect your PC

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Event Viewer is a snap Microsoft Management Console (MMC) that allows you to browse and manage event logs. It is an indispensable tool for the operation of systems for monitoring and resolution of problems when they arise.

  For more information, see the link.

  http://TechNet.Microsoft.com/en-us/library/cc766042 (WS.10) .aspx

  Please update us with the results and we will be happy to help you.

• "Error 638: the remote server is unresponsive in a timely way", when I try to connect to the Internet.

  Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?

  I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.

  I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.

• Windows 7 Clipboard stops working when it is connected to the remote desktop

  The two machines are Windows 7 SP1 with the latest updates.  Remote configuration is configured with the selected share clipboard.  The Clipboard works on the host machine until the remote desktop is started.  The Clipboard of the remote computer works without any problem.  Clipboard on the host machine starts working again when rdpclip.exe is interrupted on the remote computer.  If rdpclip.exe is restarted on the remote computer, the Clipboard of the host machine then stops working again.

  I had similar problems with Clipboard in the past, but getting the two machines on a fixed day.  It seems more recent updates have created a new problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  The question could arise if the process is damaged and should be revoked on the remote computer to restore operation. I suggest you to try the following steps on the remote computer and check if the problem persists.

  1. Open Task Manager (right click taskbar and select Task Manager)
  2. Go to the process tab
  3. Select rdpclip.exe
  4. Click on end process
  5. Go to the Application tab
  6. Click on the new process
  7. Rdpclip type
  8. Click OK

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I have problems with the remote (RDP) desktop sessions, I can't get the session to go full screen after being reduced to a minimum.

  I can't get the session go full screen after be kept to a minimum.

  I did the following things to make this work:

  1. Updated the operating system
  2. Check my RDP options to make sure that it is set to mode full screen
  3. I tried 3 different computers that it happens on both of them have every two Windows 7 Professional and both are 64-bit (XP Machines have that happen)

  Details:

  I connect to my company TS servers and application servers (all running 2003 OS). When I reduce the view full screen, via the connection bar, I go back to enlarge the window and I get a window view not a view full-screen. I've only been able to reproduce this on two machines and tested a total of 5 machines Windows 7 Pro. I also tested on a XP Machine and impossible to duplicate. The XP and 2 of 7 machines (who both question) are on a connection, the others are all on separate connections in separate locations. Is this a bug in the program or is their environment I'm missing? Still, full screen has been selected in the display area.

  Thank you

  "There is a kind of"bug"with some resolution which could refuse to full screen.
  the only way to force full-screen mode is by pressing Ctrl + Alt + break.

  Remote Desktop does not return to full screen
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/48d6cb3a-C743-404F-8411-6cedbb858c2c

  http://www.Google.com.au/search?q=remote+desktop+fullscreen+%22windows+7%22&SourceID=IE7&RLS=com.Microsoft:-to the: IE-address & ie = & oe = & redir_esc = & ei = oFmCTYufNIeKvQO-nNjHCA

  See if your problem is also related to video drivers?  He has other suggestions in the links, the first is XP, but the last one is Windows 7.

  "Hey Alshrim I thank you for your help. I've just updated my video driver and the remote connection started working: Dstrange and interesting! "Thank the people who helped me.

  Remote Desktop is not connecting
  http://www.Tek-Tips.com/viewthread.cfm?QID=1591106

  Issue RDP
  http://www.Tek-Tips.com/viewthread.cfm?QID=1593827

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.