Operators of regrouping and consolidation of ASO

Similar Questions

• Can I use Boolean operators, nested expressions, and generic expressions in the search function of the outputs of the HTML5?

  I come to the world CHM HTML5. Is there a way to enable/activate my audience to use:

  • Advanced (i.e. other than AND & OR) of the Boolean operators, e.g., CLOSE or NOT
  • Nested expressions, for example, newsletter AND ('formula design' OR 'form')
  • Generic expressions, for example, network * or MD5?

  I am currently using RoboHelp 10.

  This version runs (and if not, then don't RoboHelp 2015) support the ability to activate one of these in RoboHelp (via a parameter of GUI or even by manually changing the search.js or another file in the output of HTML5)?

  At present, RoboHelp (2015) only supports simple AND & OR operators if I'm not mistaken. If you need an advanced search, I advise you to look in the Zoom website search engine

  You can edit the mhfhost.js file. The search mechanism is quite complex, so I don't think it's a viable solution. Of course, please fill out a request for functionality with Adobe Adobe - feature request/Bug Report Form

• Subcube and consolidation.

  Hello Experts,
  
  
  A new forecast Scenario dimension is added. Our method is to retrieve data, the data can be extracted from an existing script, then use it as an input in the new scenario and consolidate.
  Once the consolidation is completed erase us and reload with valid data.
  
  We find that if we do this process until we charge valid data, processes of consolidation (when valid data is loaded) is going much faster than if we had to run the time of first consolidation with data valid...
  
  Can prepare you a new subcube (new) in order to make the process of consolidating initial running more quickly.
  
  Example:; If we do not run a preliminary consolidation of the text on a new scenario and perform a first consolidation process takes 35 hours...
  If run first before the consolidation (no valid data), then consolidation that we do when we have valid data takes 17 hours...
  
  We can do the consolidation before the weekend, and then we're ready to load valid data, the time is right. Since a first consolidation would take to long, (customer unhappiness) we decided to perform a pre consol.
  
  Any suggestion would be appreciated.
  
  Thank you
  Charles Babu J

  From a SQL perspective server, but I would think similar Oracle works...

  I disagree that it is necessarily index. If your fill rate is too tight, you will get the index fragmentation when you add a large amount of data. Essentially, the index is built out of use and a reconstruction should happen. Unless you have some sort of automatic index rebuild run continuously (unlikely) is not the immediate question. I can confirm that the consolidations will certainly fragment index. As for the fill factor, essentially you're leaves one empty in the index so that when you add new entries, these can be placed in the right order. If your fill rate is too high, there is no room for the new entries and they go all the way. If your fill rate is really low, the index will take more space and be slightly ineffective, but they shouldn't be fragmented as well.

  I think that maybe the database is get expanded ('cultivated auto') getting data added. When you create a database, you specify a size for the log files and data. What happens when the data added to the database hits the maximum size of the database? You cannot add more data and boom. To resolve this problem, the autogrow feature is available. "Auto-pousser" essentially will be re - allocate disk space for the database as needed. How much it adds? It is up to you. Most systems allow you to set the automatic growth in MB or percent of the current size.

  If these settings are too small and you add a large amount of data, the database server must constantly grow the database which is a tedious process. Say that your database has 65 GB allocated to data, your application is 60 GB and a scenario takes over 10 GB. If you start to copy a scenario for a new (empty) scenario, your database will eventually be 5 GB short! Now... lets say you have 1 MB autogrow (* by DEFAULT in SQL SERVER 2005 *), you're in BIG trouble. SQL will automatically increase the database of thousands of times in 1 MB increments. It will absolutely kill performance.

  If this happens, you will see on the database log entries automatically increases.

  With all that said, design of appropriate database file is essential as well as automatic growth parameters.

  You should be proactively examines your data usage and estimate where you will need as implement you new features, etc. If you know you're going to add 10 GB of data to your system, you should just manually grow the database at least that amount.

  If you want to rely on autogrow, you must consider autogrow settings. the amount of auto-grow should be enough that he rarely has to run.

• ASM, SAN and Consolidation of LUN

  We lack a couple because with 11 GR 1 material clusterware and ASM. We have an HP EVA SAN on the back end and we arrived at a point where the number of LUNS allocated to our CARS will be ridiculous. I want to do is to consolidate the number of LOGICAL units to a more manageable (a max 8) number. Did anyone done this before? All good tips/tricks that I can look at? We are already looking to the possibility to upgrade to 11 GR 2 and if there is additional support for San with ASM on 11 GR 2, it's going to make this decision a lot easier.
  
  Thank you
  
  John

  I have another question: in the future, can we just expand the LUNS in the SAN and ASM will be pretty smart to pick that up, or is there another step to get this expansion detected?

  Well, I've never tried. But the steps required will involve something like this:

  1 expand LUNS on the storage site
  2. change the partition table on LUN exported to the database server to accommodate the new size
  3. reboot (because on disks used [in your case by ASM] changes of presentation of the score are seen after a reboot only)

  -now, I - assumptions

  4 ASM will detect the new size

  OR

  4. you must remove and re-add the updated disk the

  If you want my recommendation: just add new LUNS if you need to expand the space. Make sure they are of equal size. If the number of LUNS can test too large, you can rearrange them like you do here.

  --
  Ronny Egner

  My Blog: http://blog.ronnyegner-consulting.de

• Consolidation and calculation of minority interest

  Hi people. I'm new to HFM. I'm kind of stuck with calculation minority interests and consolidation of it. Now after watching the various messages on the calculation of minority interest here, I'm still confused if we can use the expression of calculation for calculation of minority interest in Sub Consolidate() or should we include it in Sub calculate (). Please find below the script I'm working on.
  
  SCRIPT:
  
  Void Consolidate()
  
  HS = method. Node.Method("")
  HS = PCon. Node.PCon("")
  HS = POwn. Node.POwn("")
  vMIN = 1-HS. Node.POwn("")
  PMin = PCon-POwn
  Dim strAccount, I have
  
  
  
  Set DataUnit HS =. OpenDataUnit("")
  NumItems = DataUnit.GetNumItems
  For i = 0 to NumItems-1
  Call DataUnit.GetItem (i, strAccount, PKI, Custom1, Custom2, Custom3, Custom4, Data)
  
  If method = "Holding" then
  Dial the HS. Con("",PCon,"")
  End If
  
  
  
  If method = "Global" Then
  
  If StrAccount = "281100" then
  
  Dial the HS. Con("A#281100",PMin,"PMin")
  
  "Call HS." Con("A#281000",vMIN,"")
  
  On the other
  
  Dial the HS. Con("",POwn,"")
  
  End If
  End If
  
  
  "If HS. Account.IsConsolidated (strAccount) and Data0 then
  "If Data0 then."
  "" HS. "." «' Con ' has # "& strAccount, POwn,»»
  ' If StrAccount = "281100" then
  "HS. «' Con ' ", PMin,»»
  "End If
  "End If
  "End If
  
  Next
  
  EndSub
  
  
  Void calculate)
  
  HS. EXP ' a 281100 # = a #CapitalStock - a #Investments.
  
  End Sub
  
  My doubts:
  
  1. is the correct expression for the calculation of minority interest?
  2. If so, can we use it in Sub Consolidate()?
  3 If the minority interest to its parent using PMin consolidate? If he is kindly provide the appropriate expression.
  
  Looking forward to some help. Thanks in advance.

  1. the dimension of value about: no doubt, he must see as other members of the value you include in the statement if as below:

  If vValueMember = "" or vValueMember = "" or SH or. Value.IsTransCurAdj () or vValueMember = '[Adjs Parent]' then

  It is essential to control which members of value, your code applies, since it would not be the case where it applies to everyone (as in the case of [percentage] that excluded us in the code that I sent you)

  2. information on parent members: If the minority interest account is a parent account, you must apply all the calculations on the basis of accounts (his children). HFM rules cannot write the results of the calculations of dimension members of parents (accounts, PIC, and custom dimensions). Parent dimension members always get values by bringing together the children of HFM.

  -Kostas

• How to use as and between operators at the same time

  Hello
  
  I want the result form
  
  (1) two digits between 80-90 member_number
  
  I tried this
  
  Select * from mbr_account, where member_number like "___80" union
  Select * from mbr_account, where member_number like "___81" union
  Select * from mbr_account, where member_number like "___82" union
  Select * from mbr_account, where member_number like "___83" union
  Select * from mbr_account, where member_number like "___84" union
  Select * from mbr_account, where member_number like "___85" union
  Select * from mbr_account, where member_number like "___86" union
  Select * from mbr_account, where member_number like "___87" union
  Select * from mbr_account, where member_number like "___88" union
  Select * from mbr_account, where member_number like "___89" union
  Select * from mbr_account, where member_number like '___90 ';
  
  
  It works fine, but I want small query to get the same result
  
  Is it possible to use 'like' and 'between' the operators or 'in' and 'between' the operators at the same time?
  
  
  
  Thank you
  Praveen

  Hello
  If that helps?

  select* from mbr_account where substr(member_number,-2,2) between 80 and 90
  

• webDAV and WireShark

  Hi all

  I noticed "NI_WebDAV.lvlibirecotry Listing.vi ' ~ 45 seconds back with the remote server lists, while Internet Explorer performs the same task in 1.3 seconds.

  I ran a wireshark with capture filter "computer host and .

  During the capture of the traffic of Internet Explorer, I get packets of 1821 and wireshark capture file is large ~2.7MB.

  When I capture "Directory Listing" LabVIEW traffic (using a breakpoint immediately before the VI so I can start the capture after the WebDAV session is created), I get 9316 packages and the capture file is 14 MB.

  Curiosities about two things:

  (1) why the labview function is screw up the network that request data both to get more or less the same information (perhaps a 'base Directory Listing.VI' must be created and that returns the same information than Internet Explorer, in other words: list of all files and folders, date and time of files, size of files (, file names) and nothing else?)

  (2) in BOTH cases, I can't for the life of me find ALL the packages from the laptop TO the server?  -J' have even extended by capturing ALL traffic from all interfaces in promiscuous, from the VI mode after the capture was on, wait the full VI (opening of webdav session, request the inclusion in the directory <...43 seconds...="">close the webdav connection, then by using filters to show me all the traffic display with eth.dest == and I'm still not the packets to THE Server!   So HOW are sessions/connections to a webDAV server and how the queries/commands are sent to the server how can I capture that traffic!

  To answer my own question:

  Several types of "on the network" communication exists at a level very deep down in the OS kernel. These (outgoing) packets are not visible to the software running on the same computer.  This is why wireshark is unable to see these packets.

  The solution is to get something like the SharkTap network sniffer for ~ $70, or use an old school HUB (with absolutely no capacity of switching, so in other words nearly impossible to find these days as weven products labeled as hubs are really primitive switches), OR switch you can do different types of worms the front of a 'service' of the switch port managed a costly.

  I ended up using the SharkTap.  So now I can do a WireShark capture "man in the middle" using my laptop out of the "Harbour Centre" on the SharkTap with another device (PC, cRIO, etc.) and the network/server on the other two ports and voila, I can now see Journal of WebDAV, WebDAV and other low level (windows remote desktop applications windows network fileshares etc.) packets to destination between my "client" and "Server". "»

  Regarding the filters capture and tips I found useful:

  You can use Boolean operators such as AND and OR with (parentheses) to build filters developed, however, I found I especially need just a few and what I do anyway.  I usually only filter by 'destination' of the MAC using MAC of sender and receiver addresses.  It cuts all random ARP and other programs that I fear not (usually) with, while ensuring that get ALL the rest... If it's too much, I add in the filters of port or Protocol to reduce further messages.

  Configures this capture filter to capture only the packets going to the MAC or MAC:

  dst XX or XX dst ether ether (for source, or ether host of variations of this filter, you can use CBC ether).

  Keywords

  WebDAV wireshark

• whenever I try to use the windows fax and scan, I have this message:

  whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?

  Hi Mohamed

  Thanks for your posting in the Microsoft community

  You can check if you have my documents in C:\Users\ (username) \My documents correct location.
  If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.

  You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.

  See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  OR

  Just find a hidden file called 'fax' at c:\users\rich\Documents\. I have
  delete the file and create a directory named "Fax" to
  c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
  "Personal cover pages. You click Windows Fax and Scan

  It will work

• defraging disk c said its consolidation

  that means consolidate and why he did it 2 times

  That's the term for organizing files for each application as close as
  possible later fragments have been removed to make it faster.

  With the old XP deragementer there is a bar chart that gave a very good Visual
  interpretation of the movement and consolidation of files. It would display fragments,
  Red, removed and files in blue being grouped into large blocks instead of
  many small blocks or lines, but Win7 likes to keep mysterious;).
  It will be more than twice if you don't defrag often, or in some cases, such as after installing a game.
  It is an improvement on the XP Defragmenter. If you want better consolidation
  with XP, you had to run the defrag more than once.

  .

• Stupid MDX script takes more than 10 hours to run in ASO

  I inherited a stupid MDX takes more than 10 hours to run in ASO. This formula is member of the map called forecast scenario & real scenario.

  This is the equivalent of ASOsamp of it:

  

  I think I can shorten it to:

  

  (1) are the following equivalent?

  

  IIF (([ActualScenario],[Expense]) + 0 <>0)

  can be replaced by

  

  IIF (NonEmptySubset ([ActualScenario], [Expense])

  ?

  2)

  The reason I can remove almost all the lines for the PERIOD - his first line, it is already check if [period] is zero. Then, it updates level 0.

  So why would we want to write the code to update (period) levels 1, 2 and 3?  ASO is supposed to automatically consolidate all other levels 1 to 3. So why is this MDX aggregating levels 1 to 3?

  (3) in fact, I don't know why we need this Case statement:

  CASE WHEN ISLEVEL ([period]. CurrentMember, 0)

  I thought THAT MDX in Member roadmap scenario only works on members leaves (zero level).

  PS.

  The time dimension is simply

  Year

  -T1

  -Jan

  -Feb

  -Mar

  -Qtr2

  etc.

  Thank you and Merry Christmas / happy holidays!

  PS. I changed my name to "SEEP limits."

  Rolling up the quarters is the real problem. Since you have a verification statement to see if you are at level 0 do the math, you're cutting everything above level 0. Yes, it's fast - but it's because you're excluding senior level members.

  I don't know how this cube is great, but you can possibly use this formula with a procedure calc to write the data to another Member. In this way the aggregation would work without any formula.

• Restructuring of ASO failed

  Hello

  I'm trying to save the contour keeping all data. After launching this save action, I get the error below.

  
  

  "[cannot extend table space [temp] please see application log for details]".

  
  

  I set maximum disk size for unlimited (4294967295) and maximum file size to unlimited (134217727). These values are the same for the default and Temp.  I am new to ASO. So need your help.

  
  

  I will add an entry in file more by clicking Add a location, and if I do, what will be the impact?
  

  Hi TimG/i-need-my-FIX,

  Thanks for your clear explanation. Now the question is as you say, there is a lack of disk space. In fact, we created the application in a base directory and sharp tablespace ASO to the base directory.  Now the DBA suggesting us to change the way the table of that particular application space, as they are not allowed to have more space in their repertoire.

  Here's how to change the path of the space table my query?

  My table existing space path: / home/hypadmin/Oracle/Middleware/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app

  My new path should be: / hyperion-app3/app

  I saw in SER60 that we cannot change the table space unless we the cube. To achieve this, I realized that it must follow the steps below:

  1. take the full backup of the ASO cube data.

  2. turn off the whole cube.

  3. remove default location and temporary tabs.

  4. Add the location of the new path. for example, / hyperion-app3/app in default and temp.

  5 load the data again.

  Please correct me if I missed a few steps or if I am mistaken.  If not is there any other alternative means to achieve this.

  Thanks in advance

• Backup of the WSA * and restore *.

  Hello

  I'm trying to understand how we should maintain regular backups of a request for ASO and restore in case of data loss/server failure, etc..

  I read the Database Administrator Guide that says "to save and restore global storage applications, you must use manual procedures."

  In looking at Backup and Recovery Guide we explained that a backup of ASO method to stop the application and copy the relevant application files. It lists under "to back up a database of global storage:" but there is no corresponding section "restore."

  So - not - where can I find explanation of how restore a backup of ASO taken this way. For example, if I 'accidentally' delete the application and then try to copy the saved folder app back to where it was, EAS does not list the application even after refreshing the list of applications.

  What very obvious step I'm missing?

  I know I could do various export of data and recreate the DBs by MaxL and applications, but this seems a very random way of doing things. There are on Oracle RMAN, TimesTen it y ttBackup/ttRestore - what is the 'good' way to backup and restore on ASO?

  Thank you, Robin.

  There are two ways to do

  1. to restore the backup, the application and the database of EAS, stop the application or restore it

  2. restore the files to the correct location, and then of EAS make a creation of the application and it must acknowledge your application

  Note that if you remove the application, then restore, you will lose the security associated with the application and will have to rebuild.

• Failed to load several files to Essbase using generics and MaxL characters

  I have several data files to load:
  
  
  Files:
  Filename.txt
  Filename_1.txt
  Filename_2.txt
  
  
  According to the following link, Essbase is able to load several files to the BSO via MaxL databases using wildcards:
  
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_tech_ref/frameset.htm?launch.html
  
  However, when I try to run the following, I get the following error:
  
  
  MaxL:
  import data from database MyApp.DB of data_file text Server "... /.. '. /MyApp/filename*.txt' using the rules_file server 'L_MyRule' error add to '\\Server\Folder\L_MyRule.err ';
  
  Error:
  ERROR - 1003027 - failed to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB /... /.. / Filename*.txt].
  ERROR - 1241101 - Essbase unexpected error 1003027.
  
  
  I can run the following fine without any problems, but it deals only with the first of several files, and I'd rather not hardcode several files as the number may vary in the future:
  
  MaxL:
  import data from database MyApp.DB of data_file text Server "... /.. '. ' / MyApp/Filename.txt "using Server rules_file error ' L_MyRule' add to '\\Server\Folder\L_MyRule.err ';
  
  
  Any ideas? And what about ASO databases?

  Good point John, concatenate the files don't get you all that. Not sure about post of James it is fair after the wildcard for the usability or performance option.

• Precedence of operators for the increment operator

  Hi guys,.
  
  When I try an example for working with the increment operator (pre increment or post-increment operator), I studied in a book that the associativity of the increment operator will be from right to left. And I tried an example to confirm, but apparently works left to right associativity.
  
  Here's my example

  public class RightToLeft 
  {
       public static void main(String[] args) 
       {
            int i = 5;
            int j = ++i * i++;
            System.out.println(" i value :"+i);
            System.out.println(" j value :"+j);
       }
  }
  
  Ouput : i value : 7
              j value : 36 

  Here, if java works with right of associativity of left in handling operator increment the value of j would be 35, but it gives 36 by evaluating the expression from left to right.
  
  Can you please let me know if I believe in a bad way.
  
  Thank you
  Uday

  Increment operators are monadic and monadic operators bind more closely than any diadic. The associative property does not apply to monadic operators.

  So you get the equivalent of (++ i) * (i ++). Associativity is related to the * operator, but it only applies if you have more than one driver of diadic of the same priority.

  Associativity determines the order in which, for example 'i + j + k' is evaluated. It's like (i + j) + k or i + (j + k). (Either way it is always evaluated left to right).

  Published by: malcolmmc on May 31, 2012 12:00

• Difference between groups of ports and VLANS

  Hi guys

  I read ESX Admin guide 2 times till now, but I still don't know what exactly is the difference between groups of ports and VLANS? I understand, but if someone asks me this question I will not be able to respond with confidence.

  Network also label: my understanding is that it's just label No technical significance in configuration?

  Thanks in advance

  One VLAN is one of the many settings that you can configure for a group of ports, you also have the tabs security, Traffic Shaping and consolidation of NETWORK cards.

  Port group name, you associate you a VM port group must be placed systematically on other hosts if you want to migrate or virtual failover from one host to another.

  Scott.

  -