Optical mouse USB Logitech MX310 6

Similar Questions

• Optical mouse USB drivers?

  I use a Dell USB Optical Mouse, M/N M-UVDEL1, with my Dimension 4700. The mouse does not seem to be working properly. I can't find a CD for the mouse supplied with the system, and when I check the Dell site for drivers in the section of the mouse and keyboard, it does not list all (for mouse or keyboard). How can I find the driver for the mouse, or alternatively, how to improve or repair, the behavior of the mouse? Thank you.

  Larry

  
  

• lost to microsoft wireless optical mouse usb connector - is it possible to continue using the mouse without the USB?

  I lost the usb connector for my 2000 microsoft wireless optical mouse for my laptop to recognize it.  Y at - it a download for my wireless laptop, so I can still use this mouse or is it still possible without the USB?

  Hi TA68.

  ·         Are you referring to transmitter/receiver for the wireless mouse?

  If so, you won't might be able to use the mouse, unless you have the device. See the following article for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

• Mouse USB Logitech HD webcam C270

  The webcam has been installed in my computer O > S > windows 7 pro. Skype said that it has not detected the webcam. I spent the USB ports without success. Logitech contacted and all they can say right now is it must be detected by Skype. Help, please...

  You have installed the latest drivers from Logitech?

  http://www.Logitech.com/en-us/support/HD-webcam-C270?CRID=405&OSID=14&bit=64

• Logitech G3/MX518 optical mouse

  I have a Logitech G3/MX518 optical mouse USB and it is constantly disconnect and reconnect.  I tried to connect the mouse to different USB ports now claim.  I have two of these mice and tried both of these as a Logitech wireless mouse, and they do the same thing.  I checked all my drivers (graphics card, keyboard and mouse) and they are all up to date.  I tried defragging the hard drive and went into the Device Manager (who says it's working properly).

  I have a nVidia SLI motherboard and twin nVidia 9800 GT graphics cards in SLI, 4 GB of memory at 800 mhz and a pentium 3 GHz core 2 duo processor.

  I noticed that sometimes, when the mouse disconnects my hardrive not 'deals' something.

  All three of my mouse work on both of my XP systems with no problems.

  Hi Stimyman,

  The pilots could have corrupt so uninstall and reinstall the drivers of.

  You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device and then double-click the device name.

  3. click on the Driver tab, and then click uninstall driver and follow the instructions.

  Click on the link to re - install the drivers manually

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: You can also run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  This problem can also occur if a particular dll file is missing or damaged. You can try to run a SFC (System File Checker) scan and check what is happening.

  Step 3: SFC scan

  (1) close all open windows.

  2) click on the Start, click on ' all programs"and click on"Accessories ". " "»»

  (3) with the button "command prompt" and click on ""run as Administrator ". "

  (4) in the window "Administrator: command prompt", type "sfc/scannow" (without the quotes) and press ENTER.

  (5) restart the computer after completing the analysis of the SFC.

  For more information, you can consult the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• For Microsoft basic mouse (USB) transmissions, are there no function ' point to a window and scroll it?

  I have the following functionality with Microsoft Basic optical mouse (USB) in Win7

  I have several windows open. I'll just move the mouse pointer to a single window and scroll with scroll wheel. Then, move the pointer to another window and scroll with scroll wheel. My old mouse under win XP was to have this feature.
  Now with Microsoft Basic Optical Mouse I can click ON a window and scroll the content, click ON another window and scroll the content. But the point and scrolling is more convenient. Does someone can tell how it is possible with Microsoft Basic Optical Mouse? Or this function is not available?
  I installed Microsoft Intellipoint 8.2 and use WIn7 Ultimate.

  Hello

  You should contact the hardware support for assistance. It would be better to post the question on the link below:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps!

• I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  Hello

  The unit just has USB slide out. If it is stuck, consult with a real computer store (the one that makes
  his own service in the House and not leeks and glances at a Best Buy or other stores) or gateway
  supported.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Logitech Optical Mouse "Wheel" can not be configured to scroll by rotating the wheel.

  Universal scrolling and automatic scrolling are the only choices in the menu. Windows XP Edition version family. Optical mouse on the PS/2 port. What needs to be done to configure the mouse so that the wheel can be made to scroll by turning?

  What to do and mouse model is? Have you downloaded and installed the driver and software from the manufacturer for it?

  SC Tom

• USB optical mouse is recognized but does not work.

  I use a computer portable 64-bit of windows 8 and I have tried to use all ports.

  The red light under the mouse appears upwards (the mouse is a mouse usb HP in the base address) but I'm not able to click or move.
  I read the previous posts about other people with this kind of problem and checked my device manager and uninstalled all my drivers and then re them installed for the mouse, but I noticed that when I uninstall the drivers mouse and plug it in again, it installs several things; under Human Interface drivers it installs the HID-compliant device and 3 USB input devices.
  It also installs "HID-compliant mouse" under "mice and other pointing devices".
  Every 10-20 seconds it will make noise that indicates it is be unplugged and plugged back in and all the drivers disappear and reappear.
  I tried to use another mouse that looks like this, and none of them work in my laptop. They both work in my PC and my laptop of brothers, they are both windows 7.
  Thank you

  Hello

  As you have tried 2 other mice in all ports of the computer and both does not work, but the same mouse works in any other computer shows that the problem is with the controllers USB (universal Serial Bus) of the laptop.

  I would ask you re-install Bus controllers and check if that helps.

  a: press the Windows key + R, and then click on Device Manager

  b. expand the Controllers of Bus USB section by clicking on the'+' sign.

  c. Uninstall each of the devices under the section USB Controller by right-clicking on each one, and then clicking Uninstall.

  d. close the Device Manager and restart your computer. Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.

  Answer please if you have any questions.

• Problem of wireless optical mouse.

  I have two problems with wireless optical mouse opportunities now encountered on my computer laptop windows 7, they will no longer work correctly on this laptop, tested both on another computer and they worked very well. The first time it happened with the mouse 1 it has been installed correctly and completely, the Device Manager also confirms, the issue that happened after I removed the usb receiver to move my laptop (done this before without problems) when I reinserted the receiver and turned on the mouse the mouse was completely insensitive. I changed batteries, uninstalled and reinstalled the drivers and still the same result, tried the mouse and the receiver on another computer and it worked fine.

  I then used a wireless mouse that worked well backup up to now and I'm having exactly the same problem after exactly in the same circumstances. A mouse by logitech and the other an i.t.works (ironically)

  I am confused now and any help would be appreciated as my computer laptop touchpad died a few months ago and not worth having repaired or replaced. I'll try and answer any questions you have for me better than I can.

  Correction of a problem. uninstalled all drivers mouse number two and reinstalled four times... Fourth time that the mouse works fine. I will try a number of mice when I get my hands on it. Must have been a problem with the driver moved.

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• HP wireless optical mouse: wireless optical mouse broken

  HI - My Mom just dropped the wireless optical mouse that came with the HP Envy 23 "touchscreen all-in-one.  The mouse no longer works.
  
  Both the keyboard and the mouse are wireless and use a shared USB receiver.  The keyboard still works but the mouse does not work.
  
  I guess it is not repairable, so here's my question: when I buy a new mouse, do I have to buy a new USB receiver as well?  Otherwise, the new mouse will automatically work with the current USB receiver?
  
  Thanks in advance for any help/ideas that anyone can provide!

  Belloc66

  Hello;
  
  Let me welcome you on the HP forums!
  
  A wireless mouse, you buy, in itself, will come with its own wireless receiver.

  When you buy a keyboard/mouse combo, they come with a single receipt that works for both.

  The new mouse MIGHT work with your existing receiver - the only way to know is to try it.

• problem mouse USB

  Hello

  I bought Tohsiba satellite a50-106.

  for this model, I bought the optical mouse A4 Tech AK-5, but after you have connected to comp, it doesn't.
  technicly mouse it's ok, I checked on my desk.

  After connection to the optical sensor usb in the mouse does not light, but there is new message device to find, then comes another message, which is device may not work correctly. Does not install the mouse drivers.

  When I get out the slot usb mouse comes another problem. USB slot is inactive (not see). When I connect diferent peripheral (floppy drive) system not to see too.

  I need to uninstall & then install the drivers for the usb hub.

  If any 1 know whwt 2 so that the work of memo please help me.

  Hello

  Do you have a few with this mouse driver CD? You have the same problem with all three USB ports? Can you also check the BIOS settings if there is option called the pointing device settings. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

• Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver

  * Need help to install a mouse optical usb on vista32 *.

  I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
  Vista search drivers on the disk and hard on the internet.

  "" looking software... looking for an online software.. "."

  Then says:
  "Windows encountered a problem installing the software driver for your device."
  Windows found driver software for your device but encountered an error trying to install it.
  USB Human Interface Device
  The system cannot find the specified file. »

  They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.

  I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.

  Help, please... Thank you!

  It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
  Did you check the homepage of the manufacturer for drivers?

  And have you installed all the latest updates for microsoft windows and SP1?

• My 2000 wireless optical mouse scroll wheel works intermittently-"mouse sigal is low."

  Original title: my 2000 optical wireless mouse scroll wheel works intermittently

  I recently bought a set of wireless with an optical mouse wireless 2000, office 100 wireless keyboard and a wireless desktop kit 3.1 receiver. After you have installed the drivers and the Intellitype/point than roulette software of the mouse does not work all the time, for example after clicking on my way in a 80 page PDF manual and long Web page that the wheel seems to not work in one direction, then the other way won't work. I tried new batteries, latest driver bouquet of microsoft site (intellipoint 8.01) moving to the receiver or away to "signal low mouse." Today, however, the mouse is 2-3 feet away from the receiver and it keeps popping up saying ' the mouse sigal is low you want to start the troubleshooter? Yes, I tried this and tried to move the USB without success. Can someone HELP please... Tired of drag and drop

  Same problem here, but I found a way to make this work (in fact there are two ways LOL)

  -Remove one of the batteries.  Believe it or not, the scroll wheel works perfectly when I remove one of the battery (any).  However, I do not know how long it will last since there isn't that one battery in operation.

  OR

  -Remove the lid of dough and remove the batteries.  Use a screwdriver to loosen the screw about 2 rounds (for some reason, I think that it is screwed in too tight).  Replace the batteries and you are or that you set.

  I can't guarantee that my methods will still work, but the fact is that it works for me since then.