Optical mouse USB drivers?

Similar Questions

• Optical mouse USB Logitech MX310 6

  According to the website it says that my 6 Logitech MX310 Optical Mouse USB driver software has been installed at the factory in Windows 7 64 bit, but I can't find how to change and customize the mouse buttons to place a custom order.  How can I change what are the functions of the buttons?

  Figured out, just download Logitech Setpoint software and then you can customize all the mouse buttons.

• lost to microsoft wireless optical mouse usb connector - is it possible to continue using the mouse without the USB?

  I lost the usb connector for my 2000 microsoft wireless optical mouse for my laptop to recognize it.  Y at - it a download for my wireless laptop, so I can still use this mouse or is it still possible without the USB?

  Hi TA68.

  ·         Are you referring to transmitter/receiver for the wireless mouse?

  If so, you won't might be able to use the mouse, unless you have the device. See the following article for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

• Logitech G3/MX518 optical mouse

  I have a Logitech G3/MX518 optical mouse USB and it is constantly disconnect and reconnect.  I tried to connect the mouse to different USB ports now claim.  I have two of these mice and tried both of these as a Logitech wireless mouse, and they do the same thing.  I checked all my drivers (graphics card, keyboard and mouse) and they are all up to date.  I tried defragging the hard drive and went into the Device Manager (who says it's working properly).

  I have a nVidia SLI motherboard and twin nVidia 9800 GT graphics cards in SLI, 4 GB of memory at 800 mhz and a pentium 3 GHz core 2 duo processor.

  I noticed that sometimes, when the mouse disconnects my hardrive not 'deals' something.

  All three of my mouse work on both of my XP systems with no problems.

  Hi Stimyman,

  The pilots could have corrupt so uninstall and reinstall the drivers of.

  You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device and then double-click the device name.

  3. click on the Driver tab, and then click uninstall driver and follow the instructions.

  Click on the link to re - install the drivers manually

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: You can also run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  This problem can also occur if a particular dll file is missing or damaged. You can try to run a SFC (System File Checker) scan and check what is happening.

  Step 3: SFC scan

  (1) close all open windows.

  2) click on the Start, click on ' all programs"and click on"Accessories ". " "»»

  (3) with the button "command prompt" and click on ""run as Administrator ". "

  (4) in the window "Administrator: command prompt", type "sfc/scannow" (without the quotes) and press ENTER.

  (5) restart the computer after completing the analysis of the SFC.

  For more information, you can consult the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• For Microsoft basic mouse (USB) transmissions, are there no function ' point to a window and scroll it?

  I have the following functionality with Microsoft Basic optical mouse (USB) in Win7

  I have several windows open. I'll just move the mouse pointer to a single window and scroll with scroll wheel. Then, move the pointer to another window and scroll with scroll wheel. My old mouse under win XP was to have this feature.
  Now with Microsoft Basic Optical Mouse I can click ON a window and scroll the content, click ON another window and scroll the content. But the point and scrolling is more convenient. Does someone can tell how it is possible with Microsoft Basic Optical Mouse? Or this function is not available?
  I installed Microsoft Intellipoint 8.2 and use WIn7 Ultimate.

  Hello

  You should contact the hardware support for assistance. It would be better to post the question on the link below:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps!

• I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  Hello

  The unit just has USB slide out. If it is stuck, consult with a real computer store (the one that makes
  his own service in the House and not leeks and glances at a Best Buy or other stores) or gateway
  supported.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Removed from USB drivers - no keyboard/mouse connecting feature

  Specifications of the computer:

  HP Pavilion P6 - 2327c

  8.1 Windows 64-bit

  8 GB (4 x 2) of RAM 1600 Mhz

  5550-A8-AMD Quad-cores to 3.2 Ghz, 3.7 Ghz Turbo

  Western Digital Blue 1 TB at 7200 RPM

  AMD Radeon HD 7750 1GB GDDR5

  Stock HP 300w

  -------------------------

  After trying to uninstall atalyst control C CAMD Center, I realized that I deleted my USB drivers during uninstall. What happened is that I did an uninstall Express instead of a custom uninstall. I had only to uninstall my driver display and CCC. Apparently, in this uninstall, there was an option to uninstall the so-called AMD USB filter drivers.  So, I have a computer that starts perfectly in Windows, but can not connect.

  Note: The keyboard and mouse work during the Advanced Startup Menu Windows 8.1.

  With this limited functionality, I tried the following:

  1. plug the mouse & keyboard in different USB 2.0 Ports & USB 3.0 Ports, but everything remained the same.

  2. I tried two different system restores. We've been when I uninstalled AMD Catalyst Control Center, and the second was on July 9, 2014. Two restorations failed due to the inability to access a Windows file.

  3. I tried to boot mode safe mode w / networking, but, oddly enough, nothing happened.

  My last option is to reset my PC to factory settings - which means that I will lose 600GB of data - or attempt a repair of the BONE. However, I have HP recovery discs. I bought last fall, and they come in 4 disks. But, the recovery discs aren't for Windows 8 8.1.

  My question is, is there a way to repair Windows (NOT RECOVERY, BUT REPAIR) with recovery disks despite them being for Windows 8 and 8.1 not, or I have to buy a disc of Microsoft? And if so, repair Windows will reinstall basic USB drivers for the connection?

  Any help will be appreciated.

  Hi mclightning88,

  Have you tried updating your Win 8.1 install in the Advanced Start Menu?

  Here the instructions on performing this task.

  If it works, you're in business. You lose third part of desktop applications and need to reinstall, but will retain the personal data.

  If you recover you can also create a custom refresh image of your PC after getting it setup the way you want. When updating from your PC in the future, simply reinstall the office applications installed after the creation of the image.

  You can also create a system image on an external drive whenever you like go in Control Panel - history file. Check the lower left corner of the history file for "System Image backup" dialog box.  Then, you create a Microsoft Recovery drive. The instructions are here. You can restore an image of the Win 8.1 system with the recovery disk.

  There are also a lot of good third-party imaging solutions that are available.

  Unfortunately you are unable to repair your installation of Win 8.1 with Win 8 HP recovery disks. If you use this method, you will lose everything. You must rebuild your Win 8 back to 8.1 Win install.

  As a last resort before a factory HP restore, you should consider this option to retrieve data.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  810-150se office
  17 t - j000 Notebook
  H8 1380t CTO Desktop
  560z Desktop

• USB optical mouse is recognized but does not work.

  I use a computer portable 64-bit of windows 8 and I have tried to use all ports.

  The red light under the mouse appears upwards (the mouse is a mouse usb HP in the base address) but I'm not able to click or move.
  I read the previous posts about other people with this kind of problem and checked my device manager and uninstalled all my drivers and then re them installed for the mouse, but I noticed that when I uninstall the drivers mouse and plug it in again, it installs several things; under Human Interface drivers it installs the HID-compliant device and 3 USB input devices.
  It also installs "HID-compliant mouse" under "mice and other pointing devices".
  Every 10-20 seconds it will make noise that indicates it is be unplugged and plugged back in and all the drivers disappear and reappear.
  I tried to use another mouse that looks like this, and none of them work in my laptop. They both work in my PC and my laptop of brothers, they are both windows 7.
  Thank you

  Hello

  As you have tried 2 other mice in all ports of the computer and both does not work, but the same mouse works in any other computer shows that the problem is with the controllers USB (universal Serial Bus) of the laptop.

  I would ask you re-install Bus controllers and check if that helps.

  a: press the Windows key + R, and then click on Device Manager

  b. expand the Controllers of Bus USB section by clicking on the'+' sign.

  c. Uninstall each of the devices under the section USB Controller by right-clicking on each one, and then clicking Uninstall.

  d. close the Device Manager and restart your computer. Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.

  Answer please if you have any questions.

• problem mouse USB

  Hello

  I bought Tohsiba satellite a50-106.

  for this model, I bought the optical mouse A4 Tech AK-5, but after you have connected to comp, it doesn't.
  technicly mouse it's ok, I checked on my desk.

  After connection to the optical sensor usb in the mouse does not light, but there is new message device to find, then comes another message, which is device may not work correctly. Does not install the mouse drivers.

  When I get out the slot usb mouse comes another problem. USB slot is inactive (not see). When I connect diferent peripheral (floppy drive) system not to see too.

  I need to uninstall & then install the drivers for the usb hub.

  If any 1 know whwt 2 so that the work of memo please help me.

  Hello

  Do you have a few with this mouse driver CD? You have the same problem with all three USB ports? Can you also check the BIOS settings if there is option called the pointing device settings. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

• Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver

  * Need help to install a mouse optical usb on vista32 *.

  I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
  Vista search drivers on the disk and hard on the internet.

  "" looking software... looking for an online software.. "."

  Then says:
  "Windows encountered a problem installing the software driver for your device."
  Windows found driver software for your device but encountered an error trying to install it.
  USB Human Interface Device
  The system cannot find the specified file. »

  They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.

  I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.

  Help, please... Thank you!

  It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
  Did you check the homepage of the manufacturer for drivers?

  And have you installed all the latest updates for microsoft windows and SP1?

• Pavilion 15-p229ax: usb drivers for Pavilion 15-p229ax

  Dear Sir/Madam,

  Hello.

  I have problem with my Pavilion 15-p229ax.

  It seems that my laptop doesn't have a USB driver.

  It cannot detect any USB (same optical mouse).

  I just bought a few days ago.

  It has been like that since I installed WINDOWS 7 x 64.

  So, I firmly believe that it is not caused by the virus.

  I installed my windows twice.

  Can anyone give me the answer?

  Thank you very much.

  Hello:

  Download and install the AMD Chipset drivers and restart.

  Who should install the smbus and controllers USB 3.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• My 2000 wireless optical mouse scroll wheel works intermittently-"mouse sigal is low."

  Original title: my 2000 optical wireless mouse scroll wheel works intermittently

  I recently bought a set of wireless with an optical mouse wireless 2000, office 100 wireless keyboard and a wireless desktop kit 3.1 receiver. After you have installed the drivers and the Intellitype/point than roulette software of the mouse does not work all the time, for example after clicking on my way in a 80 page PDF manual and long Web page that the wheel seems to not work in one direction, then the other way won't work. I tried new batteries, latest driver bouquet of microsoft site (intellipoint 8.01) moving to the receiver or away to "signal low mouse." Today, however, the mouse is 2-3 feet away from the receiver and it keeps popping up saying ' the mouse sigal is low you want to start the troubleshooter? Yes, I tried this and tried to move the USB without success. Can someone HELP please... Tired of drag and drop

  Same problem here, but I found a way to make this work (in fact there are two ways LOL)

  -Remove one of the batteries.  Believe it or not, the scroll wheel works perfectly when I remove one of the battery (any).  However, I do not know how long it will last since there isn't that one battery in operation.

  OR

  -Remove the lid of dough and remove the batteries.  Use a screwdriver to loosen the screw about 2 rounds (for some reason, I think that it is screwed in too tight).  Replace the batteries and you are or that you set.

  I can't guarantee that my methods will still work, but the fact is that it works for me since then.

• Aspire mouse usb and 603G problems

  Aspire 603G, win 8.1

  With the help of the optical mouse NSB

  I have problems with my mouse plugged in by USB.  The mouse will panic at random and I don't know how to fix it. When I click on a link in Google Chrome, it will open several pages.  If I am in a program, XCom enemy unknown, for example and click to move, shoot, or no matter what, he'll just keep clicking.  Other programs are the same.  Sometimes, maybe 2 out of 10 times, the mouse didn't not fit which is which is clicked, then it will be * taken * upward and I'm having a crazy amount of screens open. Try closing some tabs and eventually close all cause them the mutli-random clicks mouse.  So boring.

  I tried to go into the options of the mouse on the control panel and change the double click speed, but it's not helping. I moved the mouse to several usb ports and have the same problem.

  Thought it was the mouse, tried 2 other different brands and having the same problem.  Tried to uninstall and don't reboot, no help.  The only problem I see is the mouse uses a default Windows driver dated 2004, but Windows Update tells me that it is the most recent.

  Any help to limit what the issue is, or can be, will be appreciated.  I'm drowned in the tabs of the browser here.

  druidish,

  Well, here's the Windows 7 USB 3.0 drivers, we have posted.

  
  
  
  
  
  
  
  
  
  
  
  
  

  USB 3.0

  Intel

  USB 3.0 driver

  3.0.0.34

  5.2 MB

  28/04/2015

  Download

  I don't see the USB drivers loaded for Windows 8 or 10 of Windows, which means that it uses the standard Windows drivers. You can try to uninstall the mouse and have it reinstall to see if that solves it.

• Wired Optical mouse keeps freezing & has no lights

  My wired microsoft optical mouse keeps freezing & the red light turns off. At present, it will work only after first off the entire computer & its reboot. However it only works for a few minutes.  This may be due to my 3 year old grandson disabled showing a lot of interest with small fingers in the below & red lights this afternoon. Bless!  Suggestions please?

  If it flashes on and outside and dies at random... you probably need a new mouse.

  Don't know what has been rough on me pointing out what is obvious.  Direct - Yes.  Probably what you end up doing - Yes.  Rude - I can't.

  So, if I remember, the most expensive computer mouse was about $ 25,000 - yours is * definitely * an inexpensive mouse.  ;-)

  If you want to try something before replace you... Try the mouse on another computer for a few days - it has the same difficulty?  If the answer is Yes - replace it.  If not - you probably been--but try a Different mouse on the computer in question.  Does show the same symptoms?  If so, chances are two things (the latter is more likely): 1) issue software - install the latest motherboard chipset drivers.  (2) USB port bad equipment - try a different USB port and/or get your motherboard extracted for hardware failure.

• MS Wireless Notebook Optical Mouse 300 - no longer works

  I have a laptop with Vista as my current program.  I have a Microsoft Notebook Optical Mouse 3000 since the first day Wirless.  The mouse was working very well!  I use computer a day and the wireless mouse no longer works.  Green light on the USB key is on, red light on the mouse is on.  I'm in the peripherals - mouse and it shows active.  I even remove the USB and it shows then it isn't here.  Here's my question - why the mouse will not talk to the USB port and works now?  I even went out and bought a different MS Mouse and it didn't work either.  All known manufacturing, programming, software between MS and Vista mouse problems?

  Perhaps Windows does not recognize the mouse as real human interface device. If you go into Device Manager, highlight unfamiliar material, choose Update driver and then manually point it on either

  C:\Windows\System32\Drivers\mouclass.sys
  C:\Windows\System32\Drivers\mouhid.sys

  ... did allow the mouse to install?

  I am in no way affiliated with Microsoft. The information provided by me are unsecured and has no right. Use the information I provide at your own risk.