Optimization for internet, when exporting photos

Similar Questions

• When exporting photos, lightroom saves several versions of the image on my destination folder

  Hello

  I've been using lightroom for editing my pictures for about a year now.  First, I noticed the problem a few months ago, but did not bother to seek a solution so far.  Whenever I finish photo editing, I export it to my destination folder.  My problem is that when I go in the destination folder, I see several versions of the photo, even if I only export (save) once when I am fully satisfied with the modified final image.  For example, I'll see img_2222, img_2222-2, img_2222-3 and so on, sometimes up to 10 versions.  I also noticed that the images are a little different with the final image is the image with the largest number suffix (for example, img_2222-10).  I hope I am making sense here...

  As you can imagine, it's frustrating, because I end up spending an absurd amount of time to delete the versions that I don't need.  Is there any solution for this?  I searched all the settings and don't see even an option where I can record all the steps of my editing process images...

  Help!

  Hi cindymaya,

  Could you please share the version of Lightroom that you use?

  Could you please share the Lightroom export settings by using a screenshot?

  When you export an image, Lightroom displays the top progress bar left referring to the number of images that are exported.

  This progress bar says exporting a photo when exporting?

  suggest you try to export to a new empty folder, and then check if it exports several versions.

  Kind regards

  Claes

• No hard drives not found when exporting Photos

  I am under Lightroom 3.5 on Windows 7 64-bit.  I've been using Lightroom for about 2 years, it is a problem that has just this weekend.

  When in the development and selection of export module and selecting Export location and a folder to export, the dialog box now only shows me the office and my user folder - it shows not either of the two drives in my PC.  These drives appear in Windows Explorer and the library module is able to find these discs and upload pictures on them.

  Can anyone offer a tip on what went wrong and how to fix it?  Thank you.

  It is a problem to know when there are too many objects on the desktop. See here for solutions.

  Beat

• LRM-00121: "data_only;" is not an allowed value for 'content' when exporting in oracle 10 g

  I want to export data only. Here is my order export. But received error. Kindly give me the solution

  
  

  expdp master/master123@MASDB Directory= _pump_dir dumpfile= NEFTTable2.dmp logfile= NEFTTable2.log tablesN_BANK, NT_BO, NT_TYPE, NT_BTIME = content = data_only;

  
  

  Error:
  LRM-00121: "data_only;" is not an allowed value for the 'content '.

  Hello

  Remove the semicolon from the end of your command expdp:

  expdp master/master123@MASDB Directory= _pump_dir dumpfile= NEFTTable2.dmp logfile= NEFTTable2.log tables= NT_BTIME content = data_only , N_BANK, NT_BO, NT_TYPE

• When exporting photos to a smaller size, they become very blurry

  Since I updated to version export newest was interrupted. I normally export the photo full size, then use other software to harvest, and watermark. The enlarged picture is crisp and clear just that I edited, but as soon as I change the size (be it in LR or other software), it becomes extremely blurred. Suggestions?

  I exported just an image, the original had 4288 pixels on the long side. I exported specifying 800 pixels on the long side. I chose JPEG, 70% of quality. JPEG format that results has been equally strong and colorful than the original raw file. I saw similar to your reports, but personally have not been able to reproduce the problem. Can you post a screenshot of your export settings?

• Insufficient for resolution when exporting QuickTime from the first CS 5 and 5.5

  Hello:

  I'm trying to understand why, when I have a sequence first 1920 x 1080, I can't export a QT file to this resolution. OK, so I'm a FCP convert and what I usually do FCP is export a Pro Res QT at full resolution, and then to have compressor do the job. I still want to use the compressor as I could not get the card Matrox Compress HD to work either in CS5 or 5.5

  

• Do not export photos from my photo library

  When exporting PHOTOS, I get a message "Unable to load image (1 019)" but I can see them in the PICTURES? I need to export a whole bunch of pictures to a different folder for family history purposes. Most of the photos indicate that they are jpg, but I keep getting errors like this. Can anyone help with a reason and the solution?

  What version of the operating system and Photos? Using iCloud photo library?

  LN

• No Extension when exporting to flickr with Services to publish

  When you try to export photos to flickr via the Services option to publish the photos in my photo gallery of Lr3 contains the file name AND extension (.jpg). I chose the name of the file name to display when exporting photos, but I can't find the option to disable the display of the extension. My goal is to have only the name of the file without the extension that is visible to people. Is this a bug or is there something tha can be done on this subject? I can't find anything on the web about it!

  The field filename in the metadata Panel seems to contain the default file extension. I had a quick glance in the preferences, and I couldn't see anywhere to disable the display of the file extension. Even in the section File Naming, parameters of Service to publish to Flickr, it gives you only a choice of uppercase or lowercase extensions.

  You can get the result you are after by copying the name of the file without the extension, in the title field a little further down in the metadata Panel. Edit Service settings to publish to Flickr to export IPTC title rather than Filename. Extra work, but it will give you what you want.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• How to optimize the internet service from Verizon FiOs for Vista

  I agree with Verizon FiOs for internet and phone.  Recently, he was running very slowly, and when I ran a test of speed with the agent of Verizon, transfers came as ~4.96M download / upload de.758M.  In the details, he said the SendBufferSize is fixed to the Verizon Tech [8192] says size memory buffer to send should lie in the range of 6 numbers, but they could not optimize my system as it was a question of Ms.  He informed that he may be a workaround solution to improve the speed and suggested that our forum.  Can someone help me with this please?  Thank you.

  Hello

  I suggest you run the fix that he mentioned in the article below and check if the problem is resolved.

  You cannot use Verizon FiOS products at their full speed on a Windows Vista-based computer

  http://support.Microsoft.com/kb/939006

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Automatically log off the internet when the computer is idle for a few moments

  Why my computer (Vista) automatically disconnect internet when it is idle for several minutesand after downloading a file. The message that appears after downloading a file is something the performance data.

  Hi magicre,.

  (1) what is you receive the exact error message?

  (2) since when are you facing this problem?

  (3) remember you to make changes to the computer before this problem?

  Step 1: Disable the security software and then test to see if the problem persists. Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.
  
  Step 2:run Internet Explorer in mode "no Add-ons" and then check if the problem persists

  To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode To do this, follow these steps:

  1. click Startand type Internet Explorer in the box start the search .

  2. click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.

  3. test Internet Explorer to verify that it works correctly. If problems occur always,try step 2

  If no error occurs, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps mentioned in the link to determine which add-on is causing the problem

  Optimize internet Explorer
  http://support.Microsoft.com/kb/936213

  (See method 3-2 in the link)

  If the problem persists,

  Step 3: Start the computer in safe mode with network and test it. To do this, follow the steps below:

  Access the menu options advanced start by turning on your computer by pressing key F8 beforeWindows begins. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Let me know if the problem persists in this mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code: 0x80070005 when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

  can someone help me solve the following problem please? Error code: 0x80070005 is what appears when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

  Is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/last-mse-scan-was-two-weeks-ago-is-ok-whereas-my/05eba51d-95f6-4a5d-b313-da0994e57543

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA.

  Internet TV in Windows Media Center

  In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA. I checked the language settings and location, and they are set for English and the USA. I am running Windows Vista. Any help would be greatly appreciated.

  Barb thanks for all your help. I do not have it work, but I've upgraded to windows 7 and now it works.

  ~ James

• How can I optimize my Internet settings for BSNL (Bharat Sanchar Nigam Limited), the Indian Government Internet service provider and make sure at the same time?

  I would like to know how to optimize my Internet settings for the Indian Government Internet service provider and have a safe browsing experience.
  Hello
   
  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213
   
  Hope you will find many answers to your questions in this article: http://windows.microsoft.com/en-US/windows-vista/Why-is-my-Internet-connection-so-slow
   
  To secure your internet connection, install a security software on the computer.
  Introduction to security and computer security: http://windows.microsoft.com/en-us/windows7/Understanding-security-and-safe-computing
   
  Many internet settings are controlled by the Internet (ISP) Service provider. Therefore, more support on that, you can get in contact with the service provider at any time.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.