Optimization of memory with several screens

Similar Questions

• Bug in several windows in the finder with several screens

  When you use finder on several screens (with separate spaces) there is a problem when you enter fullscreen.

  Steps to reproduce:

  1. open finder on a screen.

  2. open another window in the finder on a different view.

  3. full screen or finder window (any).  You will be able to observe a Visual problem where the finder window that you do not use maximizes and enters full screen then go back to normal, just before the finder window you use between full screen.

  4. at this point your finder window full screen is missing in the top navigation bar.  To reveal it, open your mission control and the space finder-click and you will see.  Basically, the navigation bar is on the finder space expanded while the rest of the finder is on office space.

  5a. If you try to exit the full screen, your finder window will freeze.

  5. before going back to full screen, if you go to the mission control and drag your space viewfinder on the screen where your other window finder is currently on, you will be able to leave the full screen and the finder window will not freeze.

  Cause of the error:

  Still, the problem occurs if the following conditions are met:

  -You have two or more finder windows (if you have only a window of finder, you can always expand it without any problem)

  -You maximize a window of finder, and it's the only finder window on that office space

  For example, if you have three screens and you have 2 1 1 finder windows in offices respectively, you will encounter the error when you maximize the window of the solitary finder on the monitors of 2nd or 3rd.  Maximize a window in the finder on the first monitor has no questions.

  Please try to reproduce.  I hope that it is easily reproduced on any machine and I hope this will be fixed as soon as possible.

  Can not repeat to aid by end 2013 15 "rMBP and Asus 24" external display connected DisplayPort cable.

• How to adjust the website to work with several screen resolutions?

  http://www.allenkey.com.au/

  Hello, I recently designed this Web site and the formatting isn't correct when read with different screen resolutions

  Help please sélectionner!

  Hello, I recently designed this Web site and the formatting isn't correct when read with different screen resolutions

  Just so you know, and to keep clear wire, the resolution got nothing to do with the result by your page or is formatted.  A given page appear exactly the same on any screen resolution requirement to retain the same value in pixels the width of the browser.  This is the variation of the width of a screen to another resolution which causes the difference.  And Yes, it's the fact that you used absolute positioning as a method of main layout that is the problem for the reason that JTANNA has already been mentioned.

  Now - how do you want your page to behave?  Do you want to be centered and fixed width (that would be the easiest).  In this case, change this.

  on this subject.

  and this-

  on this subject.

  Now, all your containers AP reposition so that the page is again aligned the way you want, and you're done.

• Photo Screensaver with several screens

  I have long used both monitors (such as extended desktop) and the slideshow of pictures my Windows XP as the screen saver and a great way to enjoy a collection of ten years of family photos. I could not make the offerings of Windows 7 to use two monitors; only the main shows of photos, the other is dark. Someone has found a way or software that uses the full desktop; i.e. both views. Both computers have the NVIDIA graphics card.

  Hi all

  Thanks for that bring to our attention. There was an error with the message is marked as an answer in this thread, and our process now include additional measures to help prevent this from happening again.

  The problem addressed in this thread about the screen saver picture showing only on the primary monitor and Windows 7 works as expected. There may be some third party software that allows a photo screen saver to display on multiple monitors.

  If you wish to leave a comment for Windows 7 and request this feature in future versions, you can do so here.

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• Problem with multiple screens

  I added a second monitor to my iMac. The iMac seems to have difficulties to recognize the second monitor when it comes out of power saving mode. Sometimes I have to restart the computer one or more times before the second screen begins to receive the signal.

  I use a cable thunderbolt and the second monitor is a BenQ GW2760HS

  Any suggestions?

  Unless your external display is equipped Thunderbolt you probably have the wrong cable. Please use an adapter (VGA, HDMI, etc.) mini-Display in the Thunderbolt port on the computer and then connect the appropriate cable. Then follow the directions of the Apple in use several screens with your Mac - Apple Support

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Vista on Qosmio G20 - impossible to activate several screens

  Hi all!

  I have a QOSMIO G20, and I put on him, with very hard work, WIDOWS VISTA ULTIMATE.
  Everything work ok, just one thing make me in trouble... I have a Gforce GO 6600 graphics card and when I want to activate SEVERAL SCREENS, don t want detect my TV.

  I try to change your driver, but Vista say NO, this IS THE BEST DRIVER.
  I'm trying to change all the options in the NVIDIA Control Panel... nothing!

  Please, I need help! Maybe my graphics card is damaged? Is too old?
  When I connect the laptop with TV, I have sound on TV but no picture.
  All ideas are welcome and thank you!

  >... and when I want to activate SEVERAL SCREENS, don t want detect my TV.
  Can you please describe to us what you want to do exactly and how do you do that?

  It's a running application when you try to use several poster?

• Problem with matrix/screen in Qosmio F55-Q502

  Hello

  For a few weeks, I have a strange problem with matrix/screen of my laptop.
  The matrix flickers very often - no matter if the power cable is plugged in or not.
  The screen is full intensity and all of a sudden it starts flashing - it gets darker, lighter, usually for a few / dozen seconds. It does when no one touches or when I'm working on it.
  This very annoying and making eyes tired - he does it very fast and there is few levels of screen brightness.

  In addition, sometimes the screen turns off - you can see what is on the desktop but the screen is very very dark (but not empty or completely off). No reason - sometimes just in the workplace, sometimes for example when I touch (not pull) the power cable between the laptop and the power supply.
  Then, the only way to return to normal brightness of screen id to close the lid just for half a second and open it
  -matrix comes on normally, but can 'turns off' moment later and I have to do it once more - sometimes even several times...
  After 'action' with cover screens it seems that nothing ever happens...

  Anyone an idea what is the cause of such behavior or how to diagnose in details?
  Or maybe solve this problem?

  Best regards
  300 m

  Sounds like the backlight or inverter fails, or there is a bad connection.

  Is the unit under warranty? Send it to an ASP for repair.

  You should avoid to repair yourself, the backlight is very high voltage!

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?

• I'm stuck with several GB of music files on my phone and I can't get down them!

  The other day I tried to install an application on my phone, but I didn't have enough memory.  My phone is full of music via iTunes synchronisation dock. So I connected it to my computer to try to make some more room. But there is a problem.

  (1) Apple does not play nice with Palm. Synchronization is no longer permissible or possible. I can't use iTunes to manage/delete music.

  (2) in USB Mode, there is no way to access/view the library. It's just not there.

  I tried Palm support, and they confirmed that the USB Mode is not working. I guess that the library is located in a hidden folder or directory. They suggested that I downgrade my iTunes. Goal that is unacceptable to me because one) it forces me to break the license Apple, b) it is not taken in charge, and c) if there is still a remote chance it will mess up my iTunes library, I won't.

  I'm ready to get off at Palm headquarters and throw my phone to their building.

  Can someone tell me how to delete my library without hacking iTunes?

  I thought about it. Support, put this in your KB. Everyone who was sync via iTunes on a Mac is currently STUCK with several GB of music on their phone that they cannot manage or remove, which makes the Palm Pre a lot less useful than announced.

  USB mode is a waste of time for people on a Mac. These hidden files are never going to be visible, and the library cannot be removed. The solution: go through a PC. Anywhere, any PC will do. Connect your phone to the PC, go to the USB drive Mode and show hidden files, then delete them from there.

  I got an old laptop lying around at the bottom, and the problem was solved lickety split.

• Optimize/defragment memory?

  Hi, have just bought the Sansa Fuze 8 GB (great bit o ' kit!) Am running windows XP, using windows media player using the MP3 format and MTP mode.
  My question is I've seen deleted a lot of tracks from different CDs, I loaded to the device, I wonder - is it necessary to defragment the memory to optimize the gaps in that causing?
  I tried to use my pc Defragmenter but cannot access a memory of the rocket with my Defragmenter.
  Is it possible to optimize the memory at all or or is the "rocket" optimize its self when titles are deleted?
  Thanks in advance.
  Kind regards
  Youric.

  Flash memory, being solid state, takes up no more access to scattered areas he done for access areas. It may be possible to defragment but it is completely useless. In fact, I think I read that it would do more harm than good. Flash memory has a limited number of writes per sector (but the number is still quite important), so defragmentation "wears" the faster memory.

• X carbon 1 with QHD screen

  Hello

  I'm trying to connect my X 1 carbon to a HP ZR2740w QHD, but it will not show the correct resolution and it is not possible to change it (the drop down menu is grey). I tried to use a docking USB3 and the MiniDP-> DVI connector. Both docking and the MiniDP connector works fine with other screens. And other computers works very well with the HP ZR2740w screen with a resolution of maxmium. The display came with a DVI Dual-Link cable that I use, I also have another cable I tried.

  I can't seem to find any other post anywhere in this regard, so I hope it's an easy fix, and I actually ask a stupid question

  But well I installed the USB3 docking station drivers and also all the drivers available with update system. And I tried with 2 different X carbon 1.

  BTW, I'm on Win7

  I welcome all the help I can get.

  Thank you.

  The Port on the dock's DVI - I Dual Link, but it does support single link DVI - I resolution. I tested several times. I also asked Displaylink thereon, and they confirmed that the ThinkPad USB 3.0 dock not supported resolution single link DVI.

  http://www.DisplayLink.com/shop/docks

• Windows 7 x 64 - physical memory dump blue screen

  I got the blue screen a few times now. It seems that the physical memory dump blue screen starts to appear after the last window update.
  Could someone help me please understand this?
  I have attached a link to the dmp files.
  https://SkyDrive.live.com/redir?RESID=FF2F42C35A4D3A3D! 141 & authkey =! AJvPvE7o7Z3rUmI
  Windows error:
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 4105
  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA800A734F60
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\041513-11824-01.dmp
  C:\Users\Yonsu_Kim\AppData\Local\Temp\WER-21060-0.SysData.XML
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  Thank you.
  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.

  
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Configuration of memory with 1 processor Dell PowerEdge T710

  We have a Dell PowerEdge T710 server with 1 single processor and we look at the installation of 2 x 16GB of RAM.

  The server is configured for optimizer mode. With this configuration, we can install only the 2 sticks of RAM or will we need to purchase a third?

  Blueboy84,

  Yes, you can use 2 X 16 GB memory under the optimizer mode.  Informing the banks of memory A1 A2 & (recommended) on separate channels reach you speed supported up to 1333 MHz as opposed to the speed of 1066 MHz when using A1 & A4 banks.

  To extend memory future I recommend that you use the Single Rank DIMMS or double RankDIMMs as opposed to Quad Rank DIMM. Quad Rank DIMM use only two of the stores available in the channel.