Similar Questions

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Printer is not recognized by the computer

  I have a Dell V715W printer that is properly connected to the computer. When I start the computer, the printer is online. However, when I tried to print a document to an email, I received this message: "Communication not available. Printer cannot communicate with the computer. "I ran the program in case of problem, and there is no result. Also, I unplugged the power cord and the USB cable and rebooted with the same error message. What should do?

  I have a Dell V715W printer that is properly connected to the computer. When I start the computer, the printer is online. However, when I tried to print a document to an email, I received this message: "Communication not available. Printer cannot communicate with the computer. "I ran the program in case of problem, and there is no result. Also, I unplugged the power cord and the USB cable and rebooted with the same error message. What should do?

  A few questions to clarify the situation...

  • What operating system do you use?
    -Windows _ Edition
    -32 - bit or 64 - bit?
    -Level of the Service pack of the system in question?
  • You download and install the drivers from the manufacturer (Dell) for this device (Dell V715w All In One Wireless Inkjet Printer) already?
    - Dell V715w all-in-one wireless inkjet printer drivers )<-- link,="" click="" on="">
  • Is it a new issue?  By that I mean this work once day and does not not the other?

• Color Laser Jet MFP M177fw Pro: Printer is not recognized by the devices.

  When connected to a computer via the usb - B to usb at the back of the device connection, computers do not get a signal telling them that they are connected to anything. The computer windows 7 behaves as there is nothing plugged and a Mac running 10.9.5 simply gives the error message "the disk you inserted is not readable by this computer. When I try to download the drivers for the device manually, the installation of HP can't find the printer in the devices, even when it is plugged. Both computers have been restarted, several cables (who work for other printers and are located in the length of HP limit) are the same exact behavior.

  Solution has been found, windows 7 update, but a driver do not go along, while some things have worked when it is plugged. HP partner, effects no side windows just weird.

  For those who read this topic after googling their problems: updated all the drivers. EACH OF THEM.

• LaserJet M1122: Printer is not recognized by NAS LenovoEZ

  Hi guys, I have buy a new brand Laserjet and I plugged it in the center of storage of LenovoEZ USB to share the printer on the network.

  Instead to recognise the Lenovo shows a 'shared device' as if the printer was a USB key with some drivers.

  The printer is not recognized as a printing device, and I have all the Office on my neck.

  I'll wait your comments.

  Mariano

  Hi Mariano,

  I recommend that you check with Lenovo,

  As you mention, the printer is fully functional with your WIndows XP and 8.

  There are different factors to conseeder on a print server.

  It is the driver for the specific printer?

  Support a printer based on the host as the M1132?

  Lenovo may be able to provide a better response to those as being familiar with possible configurations and capabilities of the print server.

  Shlomi

• Support for Microsofts and printer is not recognized and said that it must be declared

  Original title: Declare the printer in vb

  Hello

  Follow-up

  HOW to: Trigger and control Visual Basic print dialog boxes

  Support Microsofts and printer is not recognized and said that it must be declared. I tried their code for the example and it still says that this printer is not declared

  Thank you

  Dan

  Hi Daniel,.

  Thanks for posting your query in Microsoft Community.

  I appreciate the effort you have taken to solve this problem yourself.

  This problem is better suited in the MSDN forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in MSDN forum.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Thank you.

• my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  original title: printer driver

  my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  Is what printer? Where did you get the driver?

  That you download and install the * good * driver for him? It must be for Windows 7 and Windows 7 32-bit or 64-bit Windows 7, depending on what you are running.

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• TV not recognized by the server-&gt; 40L 73

  Hello

  My problem is already listed on this forum but I can't find a solution or explanation.

  I recorded with a Toshiba account in order to use the "smart" features of my incl. TV services VOD as Maxdome etc...

  Whenever I push the button 'cloud' I get the message: "your TV was not recognized by the server. Press OK to re - connect to the server... »

  When I press OK, it will start to accept T & C, privacy, user name, password, etc... The connection will work with my current username and password...
  But unfortunately he will not stay for the next time.

  Call the hotline they suggest to send the unit for repair... I can't believe that there is a problem with my TV... But server.

  Any suggestion? May be related to an IPv6 Internet connection?

  In addition, even, I would say I'm a fan of Toshiba, my TV's performance are simply bad. When I have the cloud works, it takes two minutes until Maxdome should be started.

  And can someone tell me WHY I need to get into the clouds to access my saved content? Or Media Player? This content "offline" should be much more quickly accessible.

  Thanks for your help and your comments in advance.

  Maybe you should just a few solutions of circumvention of the Commons:
  First, you must set the default TV.
  Then configure the internet connection once more and then try to connect to the cloud to accept all of the terms and conditions, privacy and other things.

  By the way: you should also check if your firmware is up to date. This can be checked here:
  http://www.Toshiba-OM.NET/firmware.php

• Portégé R700 - 15L - 3 G is not recognized by the system

  Hello

  I already bought this laptop and I have problem with 3G driver to work.

  I downloaded the latest drivers from the website, but the device was not recognized by the system?

  Any ideas how to fix?

  Best way to fix this is to install the original OS, you got with this portable Portege. Original recovery image contains all the necessary drivers and tools and utilities.

  When you use the FN + F8 key combination what options are available?

• External hard drive is not recognized and the Table to Partition GUID (GPT) partitioning scheme has message is required (-69773)

  Hello!

  I have an external HD that has been unplugued without eject by mistake. Since then, the HD is not recognized by the finder or disk utility.

  When I list the disk in the Terminal, the drive is listed.

  But when I tried to check or repair, a message appears: "failed to check this disc: a Partition GUID (GPT) partitioning schΘma Table is required (-69773).

  I can access the files using programs such as Seagate File Recovery, but I want to extract data and repair the disk without using 3rd party software.

  Is this possible?

  If you have access to the files - a possibility would be to get the files off the disk and then reformat using disk utility

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• Hard drive is not recognized in the BIOS - Equium A60

  Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

  This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

  Thanks in advance.

  Hi Neil,

  Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

  Kind regards