Options of Touchpad disappeared on Equium A200 with Vista

Similar Questions

• 1IZ satellite A200 with Vista crashes every day without no reason

  Hello guys,.

  I have a Satellite A200 with Vista Home Premium installed. In the past months, the BONE is suspended every day, I was not able to detect the reason. nothing is having replied to the questionnaire, not even Ctrl-Alt-Delete, the only solution is to stop from the power switch.
  I do not found something wrong in the system log, so I do not know what to do. Toshiba PC diagnostic shows everithing OK.

  What can I do? Perhaps a cooling problem? A guide for cleaning?

  Thank you.

  Hello

  So to be honest, it's hard to say what are the really causes your system to hang. Possible reasons:

  HIV 1-infected
  2 problem of file system Os including drivers, programms...
  3 had to be clean
  hardware problem 4

  I recommend:

  1 search for viruses
  2 reinstall the drivers (especially as a vga and chipset drivers). Check installed programs
  3 use compressed air jet to blow off the dust from the cooling module.

  If this does not help, do a fresh install of the operating system. Then we will see what to do

  Welcome them

• Equium L350D with Vista won't mode 'sleep'

  Equium L350D with Vista will not 'sleep' in the mode I just reinstalled windows and sleep worked but now the screen just goes but its clearly not on 5000mAh
  Help, please

  > I figured it
  Can you please tell us how?

• Re: Equium A200-1V0: Vista won't load - system restore does not

  Toshiba Equium A200-1V0, purchased January ' 08
  Vista Home Premium

  Upgrade office 2007, rebooted fine, saved all the files. I went looking for vista security updates & Office including. Net3.0 - pc crashed during installation. F8 to repair pc & system restore to front office installed. everything seemed well & rebooted ok so I have backed up all critical files.

  reinstalled office 2007 & vista hanging on the required reboot.

  Try to load in safe mode & vista hangs at crcdisk.sys. It was suggested to remove all pcmcia & 1394 drivers, but the switches/s/p do not work in command prompt so I can't be sure enough to find them all to delete or rename.

  F8 for pc repair & while the menu appears, it is very slow to get there.
  Startup Repair detects no problem, System Restore won't work, so assuming that restore lost points (there were a few elders before the one I went to). Command prompt will run.

  Toshiba has provided a system restore disc, but crashes after language selection. It was suggested that the disk was duff, so I downloaded the ISO to a disk of vista without the extras toshiba restore & that said it is loading & then sits right on the blue/green screen of vista.

  I have a basic family official OEM of Vista editing copy for a new machine, I do build, so tried to boot from a full installation of windows (without formatitng) - this also hangs on the blue/green screen of vista. This is my first to face with a laptop without a correct installation disc, so if I format & reinstall the will I lose the recovery partition?

  Any other ideas of what to try?

  Hello

  I think that it s nothing wrong with the software, but with the hardware
  If the reinstallation of Vista is not possible then this could be caused by a hardware problem
  I can only suggest on the malfunction of HARD, RAM disk. Everything is possible

  If I you would be then I would format the whole HARD drive I would be to delete all partitions and would try to reinstall the operating system from the recovery CD

  If it is not possible, then you should ask the ASP in your country for a control from laptop s!

  Good luck

• Dual boot on Satellite A200 with Vista-XP?

  Computer details: * Satellite A200 PSAE6E... *.
  The laptop came with Vista... I managed to install Windows XP (with new drivers etc...) and it ' s working fine * BUT * after reboot, Acronis OSS does not recognize Vista and the computer starts directly with Win XP only. (I need two BONES...)

  I'm looking for a lot of instructions now of hours * dual boot *, but everyone takes for granted that I have an Installation DVD for Vista... I don't!
  Toshiba came only with the product recovery CD, so all the instructions of MBR and solutions that even Microsoft gives me (E:\boot\bootsect.exe/nt60 all...) it does nothing!

  Is there anyone out there?
  Please... If you can give me no hint at all... it would be just a miracle... Thank you

  Hello

  have you heard of 'Vistaboot'-> http://www.vistabootpro.org/

  A program that allows you to change the bootoptions, so if you want to change the boot settings, then try this program.

  Otherwise, you can also consult the "UBCD4Win" program which is a live cd of windows xp with many tools, you may find something to change the Boot Manager.

  Good luck

• Satellite Pro A200 with Vista is not another mobile network XP

  I have the Satellite Pro A200 Toshiba and I have some problems with the network.
  The Inernet is upp and go, but I can't find the other computers on my network.

  Im having 3 other computers on the network. The A200 is having Vista and the other has just XP - pro and XP-Home Edition.
  The network of the stand-alone tree works well but the laptop is not present in the network.

  I have checked the task force if it even.
  Y at - it anyhone who is having an idea how or what is the problem?

  Have you tried to use the option of network discovery in network and sharing Center?

• Equium A200 PSAF5E - Vista does not load

  Having a problem with my laptop, got a nasty static shock out of it the other day and since then windows Vista don't is not loading.
  I tried the reinstallation disc, but it only that load files windows then you get the loading screen for windows for an hour then just a white screen with a cursor on it.

  I'm stuck for ideas if reinstall drive does not work and I really don't want to format :(

  Hello

  You are able to access the BIOS?
  If Yes check if the HARD drive and the CD/DVD has been recognized correctly.

  If the HARD disk is not recognized HARD drive malfunction is possible!

• Can't fix Equium L350D with Vista

  When I try to repair my computer, I get an error message saying not installed programs not

  Help

  You really think someone will be able to help you if you post only this small sentence?

  If it s not too complicated for you, then I would like to know a portable model, windows OS and something more about your question

• Equium A200 Vista upgrade to Windows 7

  Want to know if it's OK to upgrade Equium A200 with Vista to Windows 7
  I ran the "Windows 7 Upgrade Advisor. It lists several Toshiba applications and/or drivers with the comment "we have no information on this version of the program compatibility. It usefully links to the site of Toshiba Windows 7 Upgrade and finally at this link.

  http://APS2.toshiba-tro.de/KB0/KBA9A02PX0000R01.htm

  "For the Toshiba PC models listed below, Toshiba provides support 'Limited pilot' on a new installation of the operating system Microsoft Windows 7.

  No Equium model is listed.
  That hell "limited support" means in what concerns the Equium A200 + Windows 7. IOW, is it OK to upgrade to Windows 7?

  TIA,
  Peter

  > That on Earth "limited support" means in what concerns the Equium A200 + Windows 7. IOW, is it OK to upgrade to Windows 7?

  This means that not all or no drivers Win 7 for models that are not included in the list would be released.
  There are two possibilities to install win 7.

  -You can do a clean install.
  This means to format the entire HARD drive and reinstalling Windows 7 on a fresh formatted partition or HARD drive.
  In this case, you will need to install all the drivers

  -You can do an update from Win Vista to Win 7
  In this case that would be installed Windows 7 over Vista and that provide a benefit. Vista installed drivers (not all but a lot) can be used by Win 7.
  As you know, many Vista drivers are compatible with Win 7 and it is why some Vista drivers can work on Win 7.

• Touchpad does not at all on Equium A200-1VO

  Hello people out there, this is the first time im making a comment on a forum!

  I'm in a bit of a mess right now.

  Here's the story

  * I bought this laptop about a week ago 2nd hand
  * delivered with only the laptop and the charger
  * NO RECOVERY CD
  * To upgrade my version of vista frm Home premium Ultimate!
  * Everything was going well, I downloaded updates
  * THE TOUCHPAD NO LONGER WORKS
  * I reinstalled Vista premium edition again, and the problem was still there.
  * checked in Device Manager and it says that the device is correctly workin
  I TRIED THINGS *.
  Re-installation of Vista
  UN-installing and reinstalling drivers
  Download the latest drivers
  Change touchpad settings
  tried the function keys (FN + F9)
  still no joy!

  It's really bothering me now because I know that he worked at the beginning
  I tried to 11hours altogether to get the touchpad to work

  someone help me please!

  Hello

  This laptop seems to belong to the series of PSAF5E.
  I wonder where you found the drivers for this series?  :|

  However, I checked the Toshiba European page and didn t find the driver for the touchpad Vista especially for this series.
  BUT the page provides a few (two drivers) touchpad for the Equium A200 PSAEE.

  I recommend to install the Alps Electric Touch Pad driver v7.0.301.4 and the driver Synaptics Touchpad v. 9.1.14.0.

  By the way; It s always advisable to reinstall the operating system with the Toshiba Recovery CD. If you n t have these CDs you could order it from the ASP which is responsible for you country.

• Equium A200-1V0 - cannot create the hibernation file

  Equium A200-1V0, Vista Home Premium (SP2)

  Hibernation has disappeared recently. I just did a cleaning disc. I have tried to go to the command prompt and enter powercfg / hibernate on, but I get a message saying that the system could not create the file of hibernation with a specific error code: 0xc0000022.

  Suggestions, please?

  Thank you.

  Hi Peterspragge,

  You have enabled hibernation in Vista power management?
  What happens if you press the FN + F4 key combination to enter hibernation mode?

  I never had a problem with the Hibernate in Windows mode and I think that his Microsoft more related question.
  Have you looked on the forums of Microsoft solution possible?

• Equium A200-15i: I can't use the touch pad - no response

  I can't use the touchpad in my equium A200-15i.
  When I press the button, there is no response at all.

  Please help me to solve it.
  I tried to uninstall the program and reinstalled, but the problem persists.

  Hello

  Have you checked if the touchpad is properly activated?

  Using the FN + F9 key combination, you can disable and enable the touchpad feature!
  Please check this function if you have not disabled the touchpad accidentally!

  Last but not least, I would recommend checking settings the touchpad mice control-> Advanced-> advanced settings panel.
  You will find different options that can be configured to use all available touchpad features.

  Best regards

• Tempo service crashes on Equium A200

  Equium A200, Windows Vista.

  Tempo service crashes whenever I start the computer.
  I did a search of file Version.txt and minidump.mdmp but can't find them.
  Can anyone help?

  Details below.

  Description:
  Laptop Performance Tuning Service service hung on starting.

  Signature of the problem
  Problem event name: ServiceHang
  Service name: TempoMonitoringService
  "Name of the image: TempoSVC.exe.
  Image Version: 0.0.0.0
  Type of service: 10
  Startup type: 2
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 2057

  Files helping to describe the problem
  Version.txt
  minidump.mdmp

  Hmm I m really don't know why this service is suspended, but you can disable it.
  This could be the * msconfig.
  Then restart and check whether or not the service has started.

  Good bye

• Sync of Smartphones blackBerry with vista calendar and address book

  Hi, I am new to the Blackberry curve 8310 and Windows Vista.  I can't get my info from my Blackberry to engage contacts and the timing of Vista because it is not recognized by Blackberry.  Any suggestions are appreciated!

  Hello. I am afraid that I did not understand all options regarding the synchronization of my 8310 with Vista calendar still; However, I had success sync my Blackberry with Contacts in Windows Vista, the other day.  After you load the Blackberry Desktop Software, go and click on synchronize, and then click the Configuration tab.  On this tab, click on the button "configure Synch... ».  This brings you to a screen that allows you to choose which office program you want to use to synchronize your info.  Select address book and then click on the "Settings" button... ».  Select Microsoft Outlook Express and click on "next >".  Select what kind of synchronization that you want to perform (if you want a clock 2 channels or just for the synchronization from your phone to the computer or the computer to the phone) and click on "next >", and then finish.  Go out and return to the Configuration tab, click the Sync tab and tap sync now.  Even if you have selected Microsoft Outlook Express for synchronization, to synchronize automatically with Windows Contacts for Vista.  (Or at least mine did).  I hope this helps!

• Satellite A100-13O - option to disable tapping touchpad disappeared

  Hello.

  I have Toshiba Satellite A100-13O bought in Slovakia (I guess they have different numbering here, because I have not found this model on your website) with Vista and Synaptics touchpad.

  After the regular updates, the option "disable listen" has simply disappeared from the touchpad menu. When I go to the properties of the mouse and try to set the touchpad it gives me just the right/left button options, but not 'disable tapping' more. The combination Fn + F9 does not work no more.

  I tried to uninstall and reinstall the Synaptics drivers, but nothing has changed. The touchpad works fine, only the tapping is quite annoying. I use the mouse most of the time, but I don't want to disable the touchpad completely, because I need to use it sometimes too. I tried searching for an answer in the world, but it seems that nobody seems to be an answer to my problem. Thank you very much for your help!

  Z.

  You write about updates to Microsoft?

  To be honest on my laptop I check the list of all offered updates them before the start of the update and it is also listed * option Synaptics input Synaptics PS/2 Port TouchPad *. Logically I disabled it because I have no update for it.

  Have you tried to roll back OS to an earlier time using System Restore tool?