or 2 but com a mesma LUN hosts um storage

Similar Questions

• Target is disconnected, but my goal is the host, I'm

  I just started using NI Veristand today, and I was trying to interface a Simulink model compiled into a LABview signal producing VI. I did the two files compatible with NI Veristand.

  I followed the tutorials online and got to the point where I can run my project. However, whenever I have started my project running. It does not reason because NI Veristand cannot the handshake with the target. I looked at my goal and saw it was disconnected, but my goal is my host.

  Does anyone know why this might be and how to fix it?

  I use LABview with NI Veristand 2015 2015.

  Thank you

  
  

• lost the piture on my laptop screen, but comes to TV

  Hi could someone please help me regarding my installation/connection hdm11 it was all works well, but I accidentally pressed a wrong key (do not know what) when iconnect cable I lost the piture on my laptop screen, but comes on tv hellllpppp ok, thanks.

  OT:

  hdm11

  Hello

  Windows operating system you are using?

  Check if the settings are correct.

  http://Windows.Microsoft.com/en-us/Windows/connect-computer-TV#1TC=Windows-7

• How have the guest OS disk cleaning disc space come on for the host operating system hard drive?

  People,

  Hello. I use VM Player 3. The OS is Windows 7. Guset OS is Windows Server 2003.

  Because the host OS Windows 7 C drive is nearly full, I need disk cleanup for drive space in Guset OS Windows Server 2003.

  Guest OS Windows Server 2003 VM hard drive parameters:

  Size current 92.5 GB,

  Maximum size of 150 GB.

  I use Disk Cleanup tool to clean C:\Document and Settings\Temp\ and temporary Internet Files\ administrator to get 32 GB of disk space. Now my computer in Windows Server 2003:

  Used space: 59.2 GB

  86.2 GB of free space

  145GB total space

  But when I check again Windows Server 2003 VM hard drive settings, its current size is 92.5 GB and is not afraid to 59.2 GB after cleaning. Host operating system Windows 7 disc does not come more disk space after cleaning.

  My Player VM VM-> settings is not a function of "Shrink" and the program does not "vmware - vdiskmanager.exe" file to run the function of 'shrink '.

  My question is:

  How to get the approximately 32 GB (92, 5-59, 2 GB) of disk space happen on Windows Server 2003 VM settings and drive hard host operating system Windows 7?

  Thank you.

  People,

  Hello. VMware Tools has tab Shrink to reduce the virtual disk. But the free disk space hard host should be larger that the size of the virtual disk you are reduced to shrink.

  The problem is solved by myself. Thank you.

• Category {' * hidden * "} works for plug-in on 32-bit hosts but fails on 64-bit host - Alternative?

  I'm experimenting with a simple plugin that is supposed to run one specific task in combination with a panel of PS.

  So the Group interface is written in Flex that calls my plug-ins via jsx (PS scripting) and transfers some parameters that can be set on the Panel for the plug-in via its scripting abilities - good. The real filter PS plug-ins used in it is executable in this way and I would so it appears in the menu filters at all.

  I tried the solution proposed in this thread: http://forums.Adobe.com/message/3854157#3854157

  To summarize I specified "category {' * hidden *"} "in the plug-in file Rémi and was then still be able to call the plug-in through jsx using its functions plugInUniqueID and jsx such as stringIDToTypeID() and executeAction(). In any case, that has worked well in 32 bit PS on the PC (I tried CS4 & CS5). I have it has not built on the Mac and its various platforms still because it failed on the PC in 64 bit PS (I tried still CS4 and CS5).

  On 64-bit hosts problem seems to be that as soon as I specify category {' * hidden * "} the plug-in not loaded more. If I makes it visible in the menu it works fine, but as soon as I do so hidden are not accessible by jsx more debugger says that no symbols have been loaded to my source files when you try to set break points.

  So obviously the category {' * hidden * "} solution does not work on all platforms.

  Is there an alternative approach to this?

  Thanks again. I really don't understand why this would be a requirement for x 64 on the PC but making the plug-in hidden filter in the PIPL solved the problem. When persistent that it works when being hidden by x 64 on the PC if it works if not being hidden...

  This is the relevant section of the PIPL should someone at - it never having the same problem. :

  #else / / we are under Windows

  #if defined (_WIN64)

  CodeWin64X86 {'PluginMain'},

  Persistent (),

  #else

  CodeWin32X86 {'PluginMain'},

  #endif

  #endif

• Mac Pro freezes but comes back

  The following usually happens in a specific application (Digital Performer), but I think it's because I spend 99% of my time on this computer in this application. However, for completeness, the app usually plays audio and film QT, more often too.

  What is happening is that the freezing of the app and I get a beachball. I thought that the app had crashed and would force quit and restart, but I have since learned that, if I wait it out, it will come to its normal operation. It may take 10 to 30 seconds (ish).

  If I open the Console immediately gel product (still works Spotlight, correct Console launches, the app switcher and still works), the last two entries are always:

  SpotlightNetHelper [330]: [SLSUGGESTIONS] managed placement failed with the error Domain = kCLErrorDomain Code = 0 "the operation could not be completed. (error 0 kCLErrorDomain.) »

  Console [40665]: Unable to connect (_consoleX) out of (NSApplication) (ConsoleX): missing setter or instance variable

  It doesn't seem to be any pattern to how many times it occurs. Sometimes, I do not see for hours, sometimes it is every few minutes.

  Anyone know what is happening here?

  Thanks in advance,

  Steve =: ^)

  I posted this a couple of weeks, but it was the weekend and the middle of the night in the United States, and I commented in the hope that it could be someone with something to offer that missed the first time. It is slowly driving me batty.

  Thanks in advance,

  Steve =: ^)

• tried to send an email but said: the e-mail host address is not found correctly enter the server never did this before but now it's

  The host ' * address email is removed from the privacy *' is not found. Please check that you have entered the server name correctly.
  Subject ' Emailing: 3n73k23pfZZZZZZZZZ96r29a70b32ee1112d3', account: ' * address email is removed from the privacy *', server: ' * address email is removed from the privacy *', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11003, error number: 0x800CCC0D

  I must say, it's pretty funny from my perspective.

  T-4-2, our system deleted servers because he recognized them as an e-mail address. To protect user information, he removed them.

  Jaz, the problem is that instead of using a server, you use your e-mail address.

  Since you use Yahoo Mail, you upgrade to the paid Yahoo Mail Plus to access POP3 servers service. You can learn more about it here: http://overview.mail.yahoo.com/enhancements/mailplus

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Remote access VPN client to connect but cannot ping inside the host, after that split tunnel is activated (config-joint)

  Hello

  I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.

  is hell config please kindly and I would like to know what might happen.

  hostname horse

  domain evergreen.com

  activate 2KFQnbNIdI.2KYOU encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  ins-guard

  !

  interface GigabitEthernet0/0

  LAN description

  nameif inside

  security-level 100

  192.168.200.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description CONNECTION_TO_FREEMAN

  nameif outside

  security-level 0

  IP 196.1.1.1 255.255.255.248

  !

  interface GigabitEthernet0/2

  Description CONNECTION_TO_TIGHTMAN

  nameif backup

  security-level 0

  IP 197.1.1.1 255.255.255.248

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  management only

  !

  boot system Disk0: / asa844-1 - k8.bin

  boot system Disk0: / asa707 - k8.bin

  passive FTP mode

  clock timezone WAT 1

  DNS server-group DefaultDNS

  domain green.com

  network of the NETWORK_OBJ_192.168.2.0_25 object

  Subnet 192.168.2.0 255.255.255.128

  network of the NETWORK_OBJ_192.168.202.0_24 object

  192.168.202.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  the DM_INLINE_NETWORK_2 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any

  access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any

  Access extensive list permits all ip a OUTSIDE_IN

  gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  backup of MTU 1500

  mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-645 - 206.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  !

  network obj_any object

  dynamic NAT interface (inside, backup)

  Access-group interface inside INSIDE_OUT

  Access-group OUTSIDE_IN in interface outside

  Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10

  Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.200.0 255.255.255.0 inside

  http 192.168.202.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  monitor SLA 100

  type echo protocol ipIcmpEcho 212.58.244.71 interface outside

  Timeout 3000

  frequency 5

  monitor als 100 calendar life never start-time now

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  backup of crypto backup_map interface card

  Crypto ikev1 allow outside

  Crypto ikev1 enable backup

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  !

  track 10 rtr 100 accessibility

  Telnet 192.168.200.0 255.255.255.0 inside

  Telnet 192.168.202.0 255.255.255.0 inside

  Telnet timeout 5

  SSH 192.168.202.0 255.255.255.0 inside

  SSH 192.168.200.0 255.255.255.0 inside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 15

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntunnel strategy

  Group vpntunnel policy attributes

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntunnel_splitTunnelAcl

  field default value green.com

  internal vpntunnell group policy

  attributes of the strategy of group vpntunnell

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl

  field default value green.com

  Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password

  attributes of user name THE

  VPN-group-policy gbnlvpn

  tunnel-group vpntunnel type remote access

  tunnel-group vpntunnel General attributes

  address VPNPOOL pool

  strategy-group-by default vpntunnel

  tunnel-group vpntunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group vpntunnell remote access

  tunnel-group vpntunnell General-attributes

  address VPNPOOL2 pool

  Group Policy - by default-vpntunnell

  vpntunnell group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns migrated_dns_map_1

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the migrated_dns_map_1 dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565

  Hello

  1 - Please run these commands:

  "crypto isakmp nat-traversal 30.

  "crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.

  The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.

  Please let me know.

  Thank you.

• Try to import photos, but come in white

  I'm trying to import pictures from an SD card, but it is showing empty. I know there are raw images on the card because I moved to a folder on my computer, thinking that he may have been a problem with my card reader. Now, try to import all the photos in my computer in lightroom, there is nothing it's just empty. It's just a recent problem, because a month ago I'm importing fine many times my files on my computer and my SD card. There is no XMP. files in folders. My computer was me invites to upgrade to windows 10 and I him have not done yet, this could be a part of the problem?

  This thread is a duplicate to try to import photos to come in white, refer to this thread for replies.

• ESX4 missmatch incompatible cpu but very strange behavior of host cpu!

  Hello

  We have a very strange problem, I have 4 ESX host, each hosts have the same hardware and same configuration of BIOS (enabled on virtualization and no.-Execute Page Protection),

  but I'm not able to migrate some (my 25 vm´s 8) online to another host, offline no problem?

  do you have someone has an idea what for the problem?

  image of the error message wouled be attached.

  BR/mfg

  Andi

  Check on the CPUID mask for these virtual machines and reset it by default.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• cannot not power off the virtual machine, but don't think the host it is running!

  I have two clusters VI3. An older cluster to 3.02 hosts and a new cluster with ESXi hosts. Level of current patch on ESXi hosts. New guests and old presenters sees the same storage, but I have additional storage which can see only the new virtual machine.

  Most of the migration to the new cluster went very well. A few questions. But a VM just GIVES me fits.

  After the failure of attempts to migrate the virtual machine to the new storage, I thought I just migrate the virtual machine to the new host and leave it on the old storage, for now, until we could find something later. VCenter events logs show that the migration has expired. However, the virtual machine appears in the new cluster and is no longer in the old cluster. Also, he turned on itself for some reason any. Turn off in Vcenter gives the error "the operation failed because another task is underway." Having the VM that I could put it off in before Vcenter, and no no unsure of how to use the RCLI for this, I have connected to the host directly mode "not supported" and has run vm-support - x to get the list of running virtual machines and their ID's so that I could kill him. However, the host does not include this virtual machine in the list of virtual machines. So I think a virtual computer that runs Virtual Center, but he thinks the host it runs on is unclear if I can't kill the process.

  Help?

  Have you tried to restart ESXi management officers, as well as the vc service is restarted?

  -KjB

• ESXI 5 and I created a virtual server, now I want to install the OS on the host, but cannot get the virtual host to recognize the CD/DVD where I have the installation disc.

  I have tried the option "edit" for the VM., changed devices, no luck, tried the bios option to create the primary boot device CD, no luck.

  any ideas?

  I think I have this problem myself, had to return to editing, CD/DVD and check the box that had 'host' not the 'customer '.

  seems good now.

• result should be modify the table GRADE_CONVERSION MODIFIED_DATE add but "("come and why?

  Result:

  ALTER table GRADE_CONVERSION add MODIFIED_DATE (/ / result should be alter table GRADE_CONVERSION add MODIFIED_DATE but "(" entrée ) ")

  ALTER table GRADE_CONVERSION add CREATED_BY VARCHAR2 (30)

  ALTER table GRADE_CONVERSION add CREATED_DATE (/ / result should be alter table GRADE_CONVERSION add CREATED_DATE but "(" entrée ) ")

  ALTER table GRADE_CONVERSION add MODIFIED_BY VARCHAR2 (30)

  QUERY:

  CREATE TABLE 'ERHAN. "" GRADE_CONVERSION ".

  (VARCHAR2 (2) "LETTER_GRADE",)

  NUMBER (3.2) "GRADE_POINT" DEFAULT 0,

  NUMBER (3.0) "MAX_GRADE."

  NUMBER (3.0) "MIN_GRADE."

  VARCHAR2 (30) 'CREATED_BY. "

  DATE OF THE "CREATED_DATE,"

  VARCHAR2 (30) "MODIFIED_BY",.

  DATE OF THE "MODIFIED_DATE".

  );

  CREATE TABLE "SARIGUL. "" GRADE_CONVERSION ".

  (VARCHAR2 (2) "LETTER_GRADE",)

  NUMBER (3.2) "GRADE_POINT" DEFAULT 0,

  NUMBER (3.0) "MAX_GRADE."

  NUMBER (3.0) "MIN_GRADE".

  );

  with the CBC as

  (

  Select src.table_name src_table_name, src.column_name src_col_name, src.data_type src_data_type, src.data_length src_data_len, src.data_precision src_data_precision, src.data_scale src_data_scale,

  CBC. Nullable src_nullable, decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as src_cons

  all_tab_columns CBC

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = Src.Column_Name

  where table_name = 'GRADE_CONVERSION' and owner = 'ERHAN.

  ),

  As TGT

  (

  Select tgt.table_name tgt_table_name, tgt.column_name tgt_col_name, tgt.data_type tgt_data_type, tgt.data_length tgt_data_len,

  TGT.data_precision tgt_data_precision, tgt.data_scale tgt_data_scale, tgt.nullable tgt_nullable,

  Decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as tgt_cons

  from all_tab_columns tgt

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = TGT. Column_Name

  where table_name = 'GRADE_CONVERSION' and owner = 'SARIGUL.

  ),

  col_details as

  (

  Select src.src_table_name, nvl (tgt.tgt_table_name, first_value (tgt_table_name) more (order of nulls last tgt_table_name)) tgt_table_name;

  SRC.src_col_name, src.src_data_type, src.src_data_len, src.src_data_precision, src.src_data_scale, src.src_nullable, src_cons,

  TGT.tgt_col_name, tgt.tgt_data_type, tgt.tgt_data_len, tgt.tgt_data_precision, tgt.tgt_data_scale, tgt.tgt_nullable, tgt_cons

  the CBC

  outer join full tgt

  on)

  SRC.src_col_name = tgt.tgt_col_name

  )

  )

  Select *.

  BeO

  Select the case sensitive option

  When tgt_data_type! = src_data_type or tgt_data_len! = src_data_len or tgt_data_precision! = src_data_precision or tgt_data_scale! = src_data_scale or tgt_nullable! = src_nullable

  then 'alter table ' | tgt_table_name | 'Edit ' | tgt_col_name | ' ' || src_data_type | ' (' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then nvl (to_char (src_data_len), ' ') | ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  ||

  cases where tgt_nullable = 'Y' then 'null '.

  of another end 'not null '.

  || tgt_cons

  When tgt_col_name is null

  then 'alter table ' | tgt_table_name | 'Add ' | src_col_name | ' ' ||  ' ' || ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then nvl (to_char (src_data_len), ' ') | ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  || tgt_cons

  When src_col_name is null

  then 'alter table' | tgt_table_name: ' drop '. tgt_col_name

  end alter_statement

  of col_details

  )

  where alter_statement is not null;

  Result:

  ALTER table GRADE_CONVERSION add MODIFIED_DATE (/ / result should be alter table GRADE_CONVERSION add MODIFIED_DATE )

  ALTER table GRADE_CONVERSION add CREATED_BY VARCHAR2 (30)

  ALTER table GRADE_CONVERSION add CREATED_DATE (/ / result should be alter table GRADE_CONVERSION add CREATED_DATE )

  ALTER table GRADE_CONVERSION add MODIFIED_BY VARCHAR2 (30)

  Erhan, you need to change your script a little

  with the CBC as

  (

  Select src.table_name src_table_name, src.column_name src_col_name, src.data_type src_data_type, src.data_length src_data_len, src.data_precision src_data_precision, src.data_scale src_data_scale,

  CBC. Nullable src_nullable, decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as src_cons

  all_tab_columns CBC

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = Src.Column_Name

  where table_name = 'GRADE_CONVERSION' and owner = 'ERHAN.

  ),

  As TGT

  (

  Select tgt.table_name tgt_table_name, tgt.column_name tgt_col_name, tgt.data_type tgt_data_type, tgt.data_length tgt_data_len,

  TGT.data_precision tgt_data_precision, tgt.data_scale tgt_data_scale, tgt.nullable tgt_nullable,

  Decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as tgt_cons

  from all_tab_columns tgt

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = TGT. Column_Name

  where table_name = 'GRADE_CONVERSION2' and owner = 'SARIGUL.

  ),

  col_details as

  (

  Select src.src_table_name, nvl (tgt.tgt_table_name, first_value (tgt_table_name) more (order of nulls last tgt_table_name)) tgt_table_name;

  SRC.src_col_name, src.src_data_type, src.src_data_len, src.src_data_precision, src.src_data_scale, src.src_nullable, src_cons,

  TGT.tgt_col_name, tgt.tgt_data_type, tgt.tgt_data_len, tgt.tgt_data_precision, tgt.tgt_data_scale, tgt.tgt_nullable, tgt_cons

  the CBC

  outer join full tgt

  on)

  SRC.src_col_name = tgt.tgt_col_name

  )

  )

  Select *.

  de)

  Select the case sensitive option

  When tgt_data_type! = src_data_type or tgt_data_len! = src_data_len or tgt_data_precision! = src_data_precision or tgt_data_scale! = src_data_scale or tgt_nullable! = src_nullable

  then 'alter table ' | tgt_table_name | 'Edit ' | tgt_col_name | ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then ' (' |) NVL (to_char (src_data_len), ' ') | ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  ||

  cases where tgt_nullable = 'Y' then 'null '.

  of another end 'not null '.

  || tgt_cons

  When tgt_col_name is null

  then 'alter table ' | tgt_table_name | 'Add ' | src_col_name | ' ' ||  ' ' || ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then ' ('| nvl (to_char (src_data_len), ' ') |) ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  || tgt_cons

  When src_col_name is null

  then 'alter table' | tgt_table_name: ' drop '. tgt_col_name

  end alter_statement

  of col_details

  )

  where alter_statement is not null;

  Concerning

  Mr. Mahir Quluzade

• Text is displayed not in 'design', but comes in the form of 'live view '.

  I created the web page < http://www.visions2200.com/CivilWar/WmGraham.html > in "Adobe Golive. I was now in Dreamweaver CS5.5. A text is not visible in the 'design' format so that I could change. All the text appears in the format 'live view '. Most of the text on the page is visible for editing. How do the text hidden in some visible cells for editing?

  Right.  Open your page in code view and scroll down a bit until you see this:

  Save your page.  Switch to the Design mode.  Not better?

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Patch KB2656369 says he installs, but comes back eager to install again. On the PC, it shows not installed, but it shows on the WSUS server, installed OK.

  Have tried everything I can find on the Microsoft website to obtain this security patch installed without success.  Patch was released on 12/06/12.  Patch is for .net Framework 2.0 Patch fails on several XP machines.

  Seeing how Microsoft Answers is for the side Windows and not on the side of the business consumer, I would recommend post on the Microsoft Technet forums, given that their community is more tilted to the professional field.  You can also try posting on the Site of the Support of Novell.