OR Scan Engine is available by myRIO or sbRIO?

Similar Questions

• cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

  All,

  I have a cRIO-9068 I try to use the scan mode for. I have intalled all the latest drivers and software as explained. However, when I put my chassis to scan mode, then select deployment all, I get this error on my chassis and all my modules:

  "The current module settings require a NI Scan Engine support on the controller. You can use Measurement & Automation Explorer (MAX) to install a software package recommended NOR-Rio with NI Scan Engine support on the controller. If you installed LabVIEW FPGA, you can use this module with LabVIEW FPGA by adding an element of FPGA target under the chassis and drag and drop the module on the FPGA target element. »

  Everyone knows this or know why labVIEW does not recognize that the software is installed on my cRIO or is it not installed correctly?

  AGJ,

  Thanks for the image. I saw a green arrown beside all my pictures of chip and it seemed that meant that the software wasn't really being installed. I formatted my cRIO and did a custom install. My problem was that I had the two labview 2013 and 2014 installed and the cRIO put conflicting versions of software. After doing a custom installation and choose only the versions of 2014, my picture now looks like yours!

• Scan engine OR does not work

  Hello, I'm trying to deploy a program on the a compactRIO real-time controller. I decided to use the scan mode for now. However, when I try to start my VI I get the following error:

  One or more items in this deployment that the NI Scan Engine and the corresponding I/O driver (s) must be installed.  Go to MAX to install.

  If you continue to experience this conflict, see the topic "Deploying and running screw on year RT target" in LabVIEW help for more information on the deployment target conflict resolution.

  I time LabVIEW Real-time on my machine so I don't know what is the reason for this and I can't find it under MAX where to install the scan engine (again, I guess that it is already installed).

  I'm using LabVIEW 8.6.1 and the modules I use on my cRIO-9073 are 9477 module and the module AI 9205. Any help would be appreciated.

  Hi Pawel,

  You must install the NI-RIO driver on you cRIO (but first on your PC). After that, go to the MAX and select your cRIO. There is a point of software. Click on it and install the driver on your cRIO OR Rio. The latest version is 3.1.1.

  You will find here.

  Mike

• cRIO - Scan engine's hybrid mode does not

  Hello

  I have a cRIO project in which almost all my modules must operate in mode of scanning (high density, low sampling etc. requirements), however I 9870 module that requires the FPGA interface, so I will try to get cRIO to work in hybrid mode. I followed the instructions in the article on this subject without success. At the present time, everything works perfectly if I leave the chassis in the interface in scan mode, but when I go to the FPGA interface (deploy the change, compile my FPGA vi, download the bitfile and restart the RT vi) none of my data values are updated, and it's not just that they are stable, the timestamps on them are all zeros. The RT is Scan Engine State VI says the scan engine is in Active mode, but still it behaves as if it is not. Any suggestions?

  Thanks for the help,

  Jon

  Hello Jon,

  Can you explain your configuration a little more in detail?

  When you say download the bitfile tell you download the bitfile blinking to run at startup?  The FPGA VI is set to run at startup?

  Your code RT has an 'open FPGA VI reference' calling in?  If not, can you try that one?

  You are able to communicate with the 9870 in hybrid mode?

  Thank you

  Sebastian

• Scan engine mode on RT does not not with EtherCAT NI 9144 chassis

  Hello

  I have problem with communication of the cRIO-9074 RT with NO 9144 via EtherCAT.
  I add the expansion with a NI 9203 module chassis to my system running on the cRIO-9074.
  I use it in engine scan mode. My PC application communicates with RT by network data stream. When I run only asks to RT, the RT is the reading of variables EtherCAT I/O chassis with no problems, but when I run the PC host application, RT probably go into configuration mode and interrupts communication with chassis EtherCAT - I can see that the LAN LED on expansion chassis stops flashing. "" Then, with still running application I click in the LabVIEW Project Explorer, the item target and select utilities ' Mode Scan Engine "pass back"Switch to active"Configuration, then it starts to communicate. I tried to do the same thing programmatically work with the Scan Engine VI Mode Set but it doesn´t so Runt-time it does not work as well.

  The behavior described above happened when I added the chassis extension in the project and only the module place entries in this chassis are affected, the rest modules 8 places directly in the cRIO-9074 work withou any problem.

  System:

  Professional Win7
  LabVIEW 2013 SP1
  OR-Industrial Communications for EtherCAT 2.7
  OR CompactRIO 13.1

  Hello

  problem solved. The reason was function RT Set Date and TIme.vi what casues on NOR-9144 error and blocked EtherCAT communication. I found that this function is no longer supported in LabVIEW. After the removal of this feature of application of RT, everything works fine.

  BR, Jan

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.

• Scan engine access on CRIO protection?

  I'm running a production Tester high volume using the CRIO in a car factory, and my application uses the analytical engine.  I fell right on s analysis vi engine in the measures of e/s palette that allows you to target a CRIO and alter the scan engine.  Although very convenient, it seems that it is a very dangerous thing to leave unprotected or some kind of user access rights.

  Can password - protect the scan engine settings changes to avoid this kind of change?  Locking of the CRIO accomplishes this?

  Thank you

  Rob

  Hi Rob,

  I found a better way to protect the cRIO. In your project, right-click on your controller for cRIO, and go to properties. In the properties on the left side menu, you will see a list of Catergories. If you click on the user access, you can allow and deny access to certain IP addresses. Now, only the IP addresses in the list of the grant will be able to connect to the cRIO (and if you can not connect, you can not deploy any code). I tried this and I accidentally the cRIO locked out. If you never lock yourself out, you need to modify the nor - rt.ini, located on the RT controller. Because you can change the access to this file as well, you want to password protect the Max cRIO thus so that this file cannot be changed.

  Thank you

• Link to the variable of the scan engine

  I have the attached labview, the settings on a variable diagram and shared block.  In my project I have a cRio who is using the analytical engine and signals some time RTD.  in my computer, I have a shared variable that I have an alias to the scan on the cRio engine variable.  I thought that this would then make the variable shared on myComputer would report to the same as the engine to scan on the cRio variable; However, this is not the case.  In the front, you can see I get 0 for the myComputer shared variable while getting the correct value of the variable of cRio scanning engine.

  Binds a variable to a variable of scan engine means that it will keep the same value?  I have to do something more?  I want to do it this way because I have a VI that find all the variables in the file SystemParameter.lvlib and did things with them.

  

  Hey GreenRiver

  If I understand correctly, you bind the network variable to the ProcessInRTD indicator. If you put this code in a while loop with a stop button, what happens? You can have a race condition here, where he reads the network variable and puts this indicator and then reads the temperature of the unit and who refers to the indicator of RTD.

  A suggestion I have is just wire the output of IO functionality in the network within a variable period of time loop. Then, on your host VI, read the network variable.

• Trend Micro PC-cillin Internet Sec 14 for Dell - Scan Engine version

  Hi all:

  Can you people posting your current version of your engine for me?  My auto system updated to v. 8.550.1001 around December 07 and all was well with the program.  I check my version of template w / Trend Micro to check website I have the current template file and I always do.

  For some strange reason, my scan engine did not update to what's trending says is the 'current' version of 8.70.  I established a procedure for manually updating the scanning engine for this v.14Dell of the web site of trend, but it has dated 12/19/06.  Mentions XPsp2/XP/Vista, but I'm not comfortable with this old info.

  Anyone have the current version of the analysis of the engine 8,700 running on your computer?  If so, how did you get it?  The automatic update, or did you download the file from the engine and do it manually?

  I had a lot of luck with this version of Trend Micro, uninstalled the firewall to deal with other issues.  I am running Vista Home Premium, SP1 (sp1 really makes things more zippier noticed a pretty big difference).

  Any help is greatly appreciated

  Thank you very much

  Ted

  Message edited by Ted_C on 04/19/2008 05:49
  
  

• IPS scan engine

  Referring to the type of scan engine specifically signature 3030. Signature 3030 uses the scan engine. The unique value of the default value is 15. What is the component "hour" of the scanning engine? There must be a time component, otherwise you'd have GIS 3030 tire all the time (15 events per hour... triggers an alarm).

  There is a 5 second timeout.

• OfficeJet 4630: contrast on scan is not available

  When I scan the result has too much contrast, but the selector tab is not available, i.e. nothing happens when I try to move it.  I need to decrease the contrast.  How do I do that?

  I just found out on my own that the contrast only works with the shades of gray, not black and white or color.  Nowhere it says that.

• Series HP Photosmart Prem C310: Scan option not available in the scanners on Mac and Printers dialog box

  I had a problem with my connection Wireless to my printer. I deleted my printer to my preferences system (Printers & Scanners dialog box) by mistake. I was able to add the printer to my Printers & Scanners using the IP address of the printer dialog. The work of connection to printer and I am able to print. However, I lost the option of detection (the Open Scan option does not appear in the Printers & Scanners dialog box). I installed a driver from Apple and I also installed a driver of HP. The driver available for my printer model appears to be a patch only.

  Here is a screenshot of my Printers & Scanners dialog. Before I deleted my printer, she had a scanning tab.

  

  I tried to find a full version of the HP software for the printer but fails.

  Hello

  By consulting the user guide once more tried to locate all the other parameters that may apply, I could personally find not 1 but of course there might be there... as any router have different options and many...

  Have you checked with your ISP that you have the latest firmware for your router? any update of the firmware can help a lot with this kind of questions.

  It is the only router, right? It has no additional effect as a range extender. etc?

  You get power from the strong wifi signal for your printer and computer?

  Please let me know the results with the USB for the moment, the software is there as we have strengthened it even installed earlier...

  Please keep me with any change, I'll try to think of other measures to try while waiting...

  See you soon,.

  Shlomi

• Search engines not available, except in mode "Run as Administrator". delete the parent.lock file profiles did not help

  After the upgrade to 21 FF, search engines no longer appear in the bar at the top right of the screen, so no searches are possible. I can navigate to my favorites and apparently also to the links contained in the e-mails.

  If I right click on the FF icon and choose the "Run as Administrator" option, the search engines are there again. I tried to delete the parent.lock in the profiles folder, that this solution was solved a problem I've had recently with the previous version of FF (not being not able to open FF and getting the error message on another version of it running, which had to be closed in the first place - but there was no other version running.) In this case, too, before I discovered the solution, I could open FF using the option "Run as Administrator"). However deleting the parent.lock file does not resolve this issue.

  I would be grateful for your help, especially if a person not very computer like me can understand put in simple terms!

  You have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder?

  Try to remove the file search.json and a possible search.sqlite in the Firefox profile folder to reset the default search engines.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file

  Firefox will rebuild the file search.json from the default search engines in the browser\\searchplugins file in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

• Speech by scanning engine.

  Is it possible change the speech recognition engine on the keyboard, swype Vlingo to google? For some reason, it does not work after that I updated my Vlingo to the latest version.

  It's strange.

  There has been updates from Vlingo since then is that these help your question?

  Thank you

  J

• CRIO 9075 pilot to 9870 (use of the scan engine)

  Hello

  I want to use a 9870 (rs232, 4-port serial interface) on a CRIO 9075.  I also want my labview project to run on the analytical engine. (running on Labview 2010 SP1)

  I used this Setup several times using a CRIO-9073 very easily.

  But now I can't find the correct driver for the CRIO-9075 game to make this work.

  Can someone help me?

  The NI 9075 cRIO requires a minimum of LabVIEW 2011 to be supported if you use the real time module. I'm afraid to say you're stuck until you can get a newer version of LabVIEW. I think that's the reason why you are able to up your game to work on the 9073 but not the 9075.