ORA-03135: connection lost contact
HelloI encountered the error: ORA-03135: connection lost contact if I let on during connection > 30 minutes (or so I think)
I'm actually access the data through a dblink.
Please indicate where I could check to see if it is a matter of settings
TKS & rgds
Hello
Check the SQLNET. EXPIRE_TIME in sqlnet.ora on client-side, or when you connect from, and it is not set, then set it to recommneded in 9i
For more information, see this document for 9i http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/network.920/a96581/sqlnet.htm
SQLNET.EXPIRE_TIME=10
Concerning
Tags: Database
Similar Questions
-
ORA-03135: connection lost contact for a single user only
Hi gurus,
I am puzzled to this problem, no one else is having problem connecting to the database except a user who always gets "ORA-03135: connection lost contact" when you try to connect to the test and Prod environment.
Oracle@PATEST > sqlplus user@testDB
SQL * more: release 10.2.0.3.0 - Production Wed Dec 23 13:21:08 2015
Copyright (c) 1982, 2006, Oracle. All rights reserved.
Enter the password:
ERROR:
ORA-03135: connection lost contact
Get the same error when you try to connect via EDIVIEW (application) or the prompt of commands or cygwin terminal directly.
tnsping works fine and return connect credentials
Here's what I did troubleshooting:
1. make sure that the user is not locked in the database
2. place the database restricted and provided this user mode access restricted and tried the connection as long as that user, not luck.
3A bounced the listener
4A rebounded from the database
5. some online forums suggest to increase the timeout setting in sqlnet.ora, in our environment, we use the OID and the sqlnet.ora is the central directory. If this cannot be the issue that everyone can connect.
6. I checked the sqlnet.log file and there seems to be no incoming connection from this user or machine.
Information system and database
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
Mna3dbts SunOS 5.10 Generic_150400-27 sun4u sparc SUNW, SPARC-Enterprise
Any advice would be appreciated
Hello world
Thanks for everyone came, surprisingly, the problem is solved by simply changing the user password in the database. As soon as the password is reset, I was able to connect using the assigned user name.
-
ORA-12547: TNS: lost contact
Hello
That's what I did on my AIX unix server to meet the problem.
I had Oracle 10 g 10.2.0.4 installed binaries and a DB running on this mobile.
I got to level it to 11g.
Downloaded and installed 11.2.0.4 version on the AIX server successfully.
Updated 10g DB 'mobile' version 11g dbua utility.
all tested fine and good connections.
Now the next day today, I have to cleanup and delete the binary 10g of the server.
And YES I used to clean it.
Apps/opt/oracle/Products/10.2.0/dB/oui/bin/RunInstaller
After this was done, I deleted manually the files of
RM - r apps/opt/oracle/products/10.2.0
Now, I see only binary 11g instead of ORACLE_HOME.
I'm trying to connect to the database 'mobile' now, and it gives this error.
hostname > sqlplus / as sysdba
SQL * more: Production of the version 11.2.0.4.0 Mar 8 15:23:49 Apr 2014
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Failed to load oracle program:
rtld: 0712-001 fc_softc symbol was referenced
module oracle(), but a definition of runtime
the symbol could not be found.
rtld: 0712-002 fatal error: leave.
ERROR:
ORA-12547: TNS: lost contact
Enter the user name:
Help, please!
I see my ORACLE_HOME, path of all the other variables are pointing to the correct location of g 11.
I had a smooth ride that follows the blog below.
I have relinked the executable and was able to start back again Sqlplus session.
DBA - Oracle.com: how to create a link to the database software Oracle under UNIX
I'm also pasting the material here, so that it is useful to others.
with an Oracle installation program provided.
-A set of patches Oracle has been applied via an Oracle supplied Installer.
Reissue of links manually Oracle suggested in the following circumstances
(even if the OS vendor can not required):
-An upgrade of the OS has occurred.
-A change was made to system OS libraries. This can occur when you apply a patch to the BONE.
-A new installation has failed during the relinking.
-An individual Oracle patch has been applied (However, to recreate an explicit link
instructions are usually included in the Readme or integrated
the hotfix installation script)
Step of restoring links:
[Step 1] Log in the UNIX system as the Oracle software owner:
==============================================================================
This is usually the user 'oracle '.
[STEP 2] Ensure that your $ORACLE_HOME is correctly set:
===============================================================================
For all platforms and the Versions of Oracle, performs this check of the basic environment
first:
% cd $ORACLE_HOME
% pwd
This will ensure that $ORACLE_HOME is set properly in your current environment.
[Step 3] Check and configure the UNIX environment for a reissue of appropriate links:
===============================================================================
For all Versions of Oracle and UNIX platforms:
Generally, the specific environment variables of platform LIBPATH, LD_LIBRARY_PATH and SHLIB_PATH are already defined to include the locations of library of the system as "/ usr/lib. In most cases, you need only check they are defined first, and then add the directory of $ORACLE_HOME/lib to them as appropriate.
for example: setenv LD_LIBRARY_PATH $(ORACLE_HOME) / lib: ${LD_LIBRARY_PATH}
[Step 4] For all Versions of Oracle and UNIX platforms:
===============================================================================
Make sure you have correctly completed the step 2:
Make sure you see the absolute path for
$ORACLE_HOME in the definitions of variables.
[Step 5] For all Versions of Oracle and UNIX platforms:
===============================================================================
Check the umask is set correctly:
umask %
This should return a 022. If it is not the case, the value of umask 022.
% umask 022
umask %
[Step 6] Run the OS in question Oracle commands:
===============================================================================
Important notes:
* Before the restoration of the Oracle links, close the database and listener.
Following commands out lots of text in the window of your session. To capture this release for download in support, redirect the output to a file.
* If the re-establishment of links an installation of the client, it is expected that certain aspects of the following commands will fail if the components were not initially installed.
For all UNIX platforms:
Oracle 8.1.X, 9.X.X, 10.X.X or 11.X.X
-------------------------------------
NEW TO 8i AND MORE *.
A "reissue" script is provided in the directory $ORACLE_HOME/bin.
% cd $ORACLE_HOME/bin
relink %... .This will display all the options for the command.
use: re-edit the link
accepted parameter values: all, oracle, network, client,.
interMedia, precomp, utilities, oemagent, client_sharedlib, ldap
You can bind again most of the executable that is associated with an Oracle Server Installation
by running the following command:
% to reissue all the
11.2.x special instructions (11.2.0.1,11.2.0.2 etc...)
--------------------------------------
(A) starting at 11 GR 2 the script to repeat will not accept 'everything' as argument (it is also
explained in: Oracle 11 g 2 connect new feature).
See c) the traditional 'make' commands that can be executed independently.
You can use the following command which will display only errors to the screen, as appropriate,
but will capture the entire repeat the link in a log file:
$ORACLE_HOME/Yes/bin/runInstaller - reissue - waitForCompletion - maketargetsxml $ORACLE_HOME/inventory/make/makeorder.xml.
ORACLE_HOME = $ORACLE_HOME 2 > & 1 | Tee $ORACLE_HOME/install/relink.log | grep-i error | WARNING - iv grep
(C) running the commands ' do ' independently:
For executables: oracle exp, imp, sqlldr, tkprof, mig, dbv, orapwd, rman,
svrmgrl, GMO, ogmsctl
% make install f ins_rdbms.mk
NOTE: After the restoration of the links the oracle executable, make sure that the
permissions on executable are 6751 (- rwsr - s - x). If they are
not, run the following command as the Oracle software owner:
% cd $ORACLE_HOME/bin
% chmod 6751 oracle
For executables: sqlplus
% cd $ORACLE_HOME/sqlplus/lib
% make install f ins_sqlplus.mk
For executables: isqlplus (Oracle9i and above)
% cd $ORACLE_HOME/sqlplus/lib
% is install_isqlplus ins_sqlplus.mk f
For executables: dbsnmp, oemevent, oratclsh
% cd $ORACLE_HOME/network/lib
% make install f ins_oemagent.mk
NOTE: After the restoration of the links the dbsnmp executable, it is necessary to run
the following commands as root (so that the ownership/permissions on)
the executable file is correct):
# cd $ORACLE_HOME/bin
# chown root dbsnmp
# chmod 6750 dbsnmp
For executables: names, namesctl
% cd $ORACLE_HOME/network/lib
% make install f ins_names.mk
For executable files: osslogin, trcasst, trcroute, onrsd, tnsping
% cd $ORACLE_HOME/network/lib
% make install f ins_net_client.mk
For executables: tnslsnr, lsnrctl
% cd $ORACLE_HOME/network/lib
% make install f ins_net_server.mk
How to Tell if Relinking was successful:===============================================================================
If the restoration of links has been a success, order brand will eventually return to the operating system
ask without an error. It will NOT be a type 'successful rebinding.
Message.
If you receive an error during the reissue of links:
===============================================================================
Check that the message that you have received a fatal error itself says, not a warning. Reissue of links errors usually complete the relinking process and contain the verbiage that is similar to the following:
"Fatal error", "Ld: fatal', 'Exit Code 1'"
While the warnings will look like: ' ld: WARNING: choice - YP appears more than once, first affecting decision-making '
and more often can be ignored.
If you receive an error that terminates the process of relinking, your first step
should be to extract the relevant information about the error to do
output:
This can be broken down into three basic steps:
1. determine the usefulness of the BONE that returns the error.
'ld', 'make', 'cc', 'mv', 'cp', 'ar' is the common sources.
2. identify the type of error:
"Permission denied", "Undefined Symbol", "File not found" are common types.
3. identify the files or the involved symbols.
-
Error message ' ORA-12547: TNS: lost contact "in dbca
Background info: I am building a cluster RAC test 11.2.0.3 running on a hardware IBM pSeries with AIX 6.1 operating system level. I need to create a cluster, and then adding a new node later practice. Due to availability limited hardware, my initial cluster will be node 1 and I'll add additional nodes later.
I installed successfully grid Infrastructure. GI and ASM are online and seem to function normally. Today, I installed the 11.2.0.3 database software. Now, I'm trying to create a test using DBCA database. After you have entered all the information database (SID information, where must reside files db, sizing of memory, etc.), the creation of the database starts, then immediately emits the error message ' ORA-12547: TNS: lost contact. "
I searched MOS (Metalink) and also reviewed a few sites using Google. All the information indicates that this problem most often occurs when you try to connect to an existing database using sqlplus. I have not found that everything about this error message when the database was created.
Does anyone have advice on how to troubleshoot the problem? Can you point me to some documents that could help with this issue?
Any help is appreciated. Thank you!Search MOS for "ORA-12547 dbca" and you will get a few hits - see if those who help.
PL also spent the last 100 lines in the Setup log - http://docs.oracle.com/cd/E11882_01/install.112/e24332/app_ts.htm#i1090466
HTH
Srini -
How can resolve ORA-12547: TNS: lost contact
I have two database (DEV AND CLONE)
HOW TO CONNECT A COMMAND PROMPT SQL AND RMAN FOR EACH
OS - aix and oacle 11g
whenever I connect with clone
then gives error
SQL * more: version 11.1.0.7.0 - Production kills Apr 19 01:10:59 2011
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter the user name: / as sysdba
ERROR:
ORA-12547: TNS: lost contact
Published by: amal on April 18, 2011 23:12Amal wrote:
I try with the oracle userbash-3. $00 ls-l $ORACLE_HOME/bin/oracle
-rwxr-x---x 1 clonedb s/n 209848956 Mar 09 23:15 / u02/oracle/CLONE/db/t
ech_st/11.1.0/bin/Oraclebash-3. $00 ls-l $ORACLE_HOME/rdbms/lib/config.o
-rw - r - r - 1 clonedb s/n 685 10 Mar 03:45 / u02/oracle/CLONE/db/t
ech_st/11.1.0/RDBMS/lib/Config.oowner of these files is "clonedb".
You need go to clonedb and then sqlplus:
$ su - clonedb
$ slqplus / as sysdbaOr you can change the owner of these files.
-
ORA-12547: TNS: lost contact... How to solve
Hello
I just got back my database to the original server. But while he brought to the DB, I get this error:
++++++++
exec(): 0509-036 cannot load program because of the following oraclePCUS01:
0509-130 symbol resolution failed for usr/lib/libc.a[aio_64.o] because:
0509-136 symbol kaio_rdwr64 (number 1) is not exported by
module load/UNIX.
0509-136 symbol listio64 (number 2) is not exported by
module load/UNIX.
0509-136 symbol acancel64 (number 3) is not exported by
module load/UNIX.
0509-136 symbol iosuspend64 (number 4) is not exported by
module load/UNIX.
0509-136 aio_nwait symbol (number 5) is not exported by
module load/UNIX.
0509-136 symbol aio_nwait64 (number 6) is not exported by
module load/UNIX.
0509-136 aio_nwait_timeout symbol (number 7) is not exported by
module load/UNIX.
0509-136 symbol aio_nwait_timeout64 (number 8) is not exported by
module load/UNIX.
0509-026 system error: error 0
0509-192 review .loader section symbols with the
command 'dump - Tv.
ERROR:
ORA-12547: TNS: lost contact
++++++++
The operating system details > uname - a
AIX 3 5 00C11C654C00 DOXDB1
Oracle version: 10.2.0.3
Please suggest. I tried to rebind the libraries, but without success.
All the settings as ORACLE_HOME, ORACLE_SID, SHLIB_PATH or LD_LIBRARY_PATH are set correctly
Regds,
MalikaThanks for sharing.
You can close the thread as answered. -
ORA-01565: error in identifying spfile / ORA-12547: TNS: lost contact
Hello
just installed 2 node rac rac 11.2, but the instance that b fails to climb!
SQL > startup;
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/db/spfile/mydb.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/db/spfile/mydb.ora
ORA-12547: TNS: lost contact
SQL >
SPFile exists and the DSO is mounted and upward. same pfile/spfile works fine on the other instance
Thank youIn which group is the user to network?
What group you chose in the group administrator of the ASM?
Authorities who have your oracle executables (in the House of the grid and Oracle Home)?If you cloned Oracle Home, then it is very likely that the oracle Oracle executable Home is owned by oracle: oinstall, but it must be owned by oracle: asmadim (or prabably s/n) in your case.
Use setasmgidwrap on the oracle executable in the House of the Oracle and this should solve your problem.
(DBCA imlicitly calls it).Concerning
Sebastian -
connection lost contact when idle too long
Hello
We have our Oracle server on a single segment of network, which is guaranteed by the firewall,
every time when I log on to the Oracle to another network segment, and if the session is idle for 10 minutes.
It will be "lost contact". The connection can keep connected do not left idle too long. (that is, query the database)
This thing will not happen if I move my pc to the same network segment as the Oracle server, the connection will not be lost even if I
It remains inactive for two days.
Is there anyone have the same experience?
What could be the cause of the problem? Oracle server or network?
Thank you
VincentFrom what you describe sounds more like the firewall has an idle time-out. Have you discussed this with your network administrators?
-
ORA-12547 TNS: lost contact confusion
Hi all
We have 15 client linux server with 11gxe each.
We have installed the database in the Group of 'oracle' userid 'dba '.
We have an another userid 'apps' apps group "apps".
I connect on apps and
Export ORACLE_HOME, ORACLE_SID, PATH
The I can sqlplus HR/hr and connected ok.
All 14 servers can connect except 1:(avec perdu contact erreur ora-12547 (mais c'est pas grave si j'utilise l'ID «oracle»))
They are all configured the same and why making this mistake.
Help, please...
Thank youJohnny Siad
I thought that it is appropriate
Johnny tells Molly
"I will now leave you."
And be not afflicted
At my will disappear
In addition, we separated
We will be always true at heart
And yet once I come back
In the mild month of May.Johnny tells Molly
"Oh I'll cry for you".
And I will be saddened
To your will disappear
Because you know very well that
Your absence cry me
I'm afraid that we burn
In some strange countryI hope I get a spanking for being off-topic
-
ORA - 12547:tls lost contact. Intermittent
Some time, I have the ora-12547 on my dblink of database 11g to a remote database to 10g. Someone can help me. The 11g is on a solaris machine and the 10g on windows server.
Here is the log
Fatal OR connect error 12547, connect to:
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host) (PORT = 1522)) (CONNECT_DATA = (SERVICE_NAME = mydatabase) (CID = (PROGRAM = oracle) (HOST = hostname)(USER=)))
VERSION INFORMATION:
AMT for Solaris: Version 11.1.0.6.0 - Production
Oracle leaves NT Protocol adapter for Solaris: Version 11.1.0.6.0 - Production
Protocol TCP/IP NT to Solaris adapter: Version 11.1.0.6.0 - Production
Time: 02-AUG-2008 09:42:18
Tracing not lit.
AMT error struct:
NS main err in code: 12547
Best regardsEnable SQL * Net follow-up on both servers.
Also - try Telnet to ip: $listener_port to ensure that it is not a physical network problem.
Let us know if you anything from the trace.
-
Data Guard Broker fails with ORA-16635 and ORA-03135
Hi all
I configured Oracle RAC with 11.2 Dataguard on Windows 2003.
I have already configured standby without Data Guard Broker and everything works fine, but when I try to use Data Guard Broker, it cannot synchronize the files of the Data Guard Broker.
I tried everything, including MOS, but not found anything.
I get this error.
Primary
Sleep modeDG 2011-02-11-09:15:41 0 2 0 NSV1: (MIV = 57) Start sending metadata file: "+DG_DATA/orcl/dgbroker/dg_config_file1.dat" DG 2011-02-11-09:15:41 0 2 0 NSV1: Sending block #1 (containing MIV = 57), 67 blocks DG 2011-02-11-09:15:42 0 2 0 NSV1: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken. DG 2011-02-11-09:15:42 0 2 0 NSV1: (MIV = 57) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138532) DG 2011-02-11-09:15:42 0 2 0 NSV1: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-09:15:42 0 2 0 NSV1: Error is ORA-03135 connection lost contact DG 2011-02-11-09:15:42 0 2 0 NSV1: Current network link for metadata resync is broken.
DG 2011-02-11-08:35:39 3001000 3 1825138419 for opcode = CTL_ENABLE, phase = RESYNCH, req_id = 1.1.1825138419 DG 2011-02-11-08:35:39 0 2 0 NSV2: Error sending block #1, size 67 blocks. Error is ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: (MIV = 11) End metadata file transmission: opcode CTL_ENABLE (1.1.1825138419) DG 2011-02-11-08:35:39 0 2 0 NSV2: Can't send CLOSE message to DRCX. Network error is: ORA-16635. DG 2011-02-11-08:35:39 0 2 0 NSV2: Current network link for metadata resync is broken. DG 2011-02-11-08:35:39 0 2 0 NSV2: Metadata Resync failed. Status = ORA-16635 DG 2011-02-11-08:35:39 3001000 3 1825138419 DMON: Database ORCLSTBY returned ORA-16635
Hello
CISCO firewalls have a configuration option 'inspect sqlnet' or 'deep packet inspection '. This setting can affect the transfer of certain data on the network and the result in malformed packets or down.
Check if this option is enabled, if it is turn off the option "inspect sqlnet" at the firewall level.
And try again...
Kind regards
Levi Pereira -
I put my cRIO 'DHCP' to 'local connection' and lost contact with her.
I put my cRIO 'DHCP' to 'local connection' and lost contact with her.
I changed the location setting labelled '2' to post a link-local only, so I think I hit save to '3 '. So, I have had no contact with my cRIO network.
I tried;
Hit the reset button
A MAX of opening closure
Go to safe mode
Lift the switch to reset IP
Power cycling the cRIO
Directly from the host to my target of cat 5 cable running
None of it worked, and I have no contact with my cRIO.
This is what MAX looks like now. How can I fix?
It turns out that I had more of a problem. Corrupt drivers, 255 in many in my subnet mask, overly complex LAN, use server control... you get the idea. So I just deleted all software, disassembled everything and more from scratch. Now back to the top and work.
Thanks for the tips everyone, all the pieces and peace where it is useful to help me see the bigger picture.
-
ORA-03135 not in alertlog?
Oracle Version: 10.2.0.4
OS: RedHat 5.5
Hi all
recently, we had a problem with a delete statement, which was triggered by a JBoss server. This statement has not finished, so I started it follow-up because I couldn't find any ora - alerts log. But curiously, I found an ora-03135 in the trace. I was wondering why this error was not in the alerts log. Y at - he of known bugs or is it the behaivior WAITED? I couldn't find anything on MOS
BTW, I have another question about the trace file. After the error in the trace file, I see a lot of:
WAITING #1: nam = 'db file sequential read' ela = file No. 13 = 5 block #= blocks 1341871 = 1 obj #=-1 tim = 1281712953742918
Is it correct to say that it is the price drop? That means obj #=-1. We also have lines with obj #= 0.
Thanks in advanceHello
in your case, your session is still alive, but lost the contact to the application. This looks like a firewall. As your server process is still alive, he cancels all your changes (different case, if your server process dies). So, you should see the cancellation directly after the error.
You will see not ora-03135 in your log file alert, since it is an error to the user. See the link above.
HTH...
-wiZ
-
Hi, I am creating the database link from a database of Oracle 11 g PostgreSQL with DG4ODBC and unixODBC
My configured for /etc/odbc.ini
[PostgreSQL]
Description = Test to Postgres
Driver = psqlodbc
Trace = Yes
Trace file = /tmp/sql.log
Database = danieldb
ServerName =
UserName = SA
Password = password
Port = 5432
Protocol = 6.4
ReadOnly = No
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
My configured for /etc/odbcinst.ini
[ODBC]
CommLog = 1
Debug = 1
FileUsage = 1
Layout common = No
Trace = 1
[psqlodbc]
Description = PostgreSQL ODBC driver
Driver=/usr/lib64/psqlodbcw.so
CommLog = 1
Debug = 0
FileUsage = 1
My configured for /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora
HS_FDS_CONNECT_INFO = PostgreSQL
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so
Set ODBCINI=/etc/odbc.ini
My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener =
(ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PostgreSQL)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)
(PROGRAM = dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib')
)
)
My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora
PostgreSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))
(CONNECT_DATA =
(SID = PostgreSQL)
)
(HS = OK)
)
I'm trying to created public database link:
CREATE DATABASE LINK PUBLIC 'orapos' CONNECT to 'HIS' IDENTIFIED BY 'password' USING 'PostgreSQL ';
When I used tnsping
[root@oracle-poc admin] # tnsping PostgreSQL
AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on May 16, 2013 20:34:19
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Use settings files:
/U01/app/Oracle/product/11.2.0/XE/network/admin/SQLNET.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))
OK (0 msec)
and finally, I try to use the database link:
"SQL > select * from tabel2"@orapos ".
2;
Select * from 'tabel2"@orapos '.
*
ERROR on line 1:
ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
ORA-02063: preceding the line of ORAPOS
What wrong with my setup?
Thank you and best regards,
Daniel
Daniel,
The problem is that you are using the ODBC Postgres driver for the HS_FDS_SHAREABLE_NAME parameter, but this must be an ODBC driver manager and not the driver ODBC Psotgres.
Go to the.Click the 'Download' and follow the instructions to download the 2.3.1 pilot and make libraries and programs.
Once this is done, then use the driver as parameter HS_FDS_SHAREABLE_NAME Manager, for example-
HS_FDS_SHAREABLE_NAME =/home/odbc64/unixODBC/2.3.1/lib/libodbc.so
Depending on where you install it.
Kind regards
Mike
-
Hello
Version RHEL 5.3
Oracel11g 11.2.0.2.0
status of $lsnrctl
AMT-12547: TNS: lost Contact
AMT-12560: TNS: Protocol adapter error
AMT-00517: Lost Contact
Linux error: 104: connection reset by peer.
is this error because there is no static IP address or because of some other questions... Please suggest.
978487 wrote:
Hello
Version RHEL 5.3
Oracel11g 11.2.0.2.0
status of $lsnrctl
AMT-12547: TNS: lost Contact
AMT-12560: TNS: Protocol adapter error
AMT-00517: Lost Contact
Linux error: 104: connection reset by peer.
is this error because there is no static IP address or because of some other questions... Please suggest.
When was the last time SQL * Net worked without error?
What has changed since then?> Linux error: 104: connection reset by peer.
Indicates the wrong OS/networking configuration
post the results of the controls of the operating system
ID
env | Sorting
uname - a
host name
cat/etc/hosts
/ sbin/ifconfig
Maybe you are looking for
-
Upgrading CPU for IdeaPad N585?
Hey everybody! First time poster here. So I recently bought a N585 and updated RAM 8 GB, hoping to get a performance gain, given the slow super 64-bit AMD E1, but it is still a serious lack in power and crashes a lot. I was wondering if someone could
-
Computer keeps jumping to white page then back to sign in page
Loads of my XP computer is going to sign in page loads icons I can get online but when I try to click on a program in the list of programs all the screen goes back to a blue screen and I loose all icons and need to start over? I'm not his life the co
-
How to make files in the private folder Accessible again
I use Windows XP Media Edition and made a private folder. I saved the file at a certain point and then later made the public folder again. Then, I moved the folder to the shared folder. I then deleted the user who had originally the private folder
-
UI settings printer error an error has occurred when troubleshooting
My problem is with the 'settings' not 'State '. W8 tells me to close the program, (add a printer - print a test page), and it will look for a solution. I have 2 printers, both in network, a lan cable to the router, the other wireless. The without lin
-
parent ID column in the outbreak of the child
HelloIt's Jean PhilippeI use a sequence to generate the primary key column in the table empbut I continue in this mode for n1.dept_id | Seq.nextval in emp_id(IE dept_id + sequence becomes the employee id)and I also, child tablein the child table that