Similar Questions

• Cookies should exclude from the deletion of LSO Better Privacy addon?

  I want to install the addon Better Privacy. In your discussion, you point to the frequently asked questions for warnings on the erasure of large cookies. I couldn't see this addressed in the FAQ. Which cookies should be excluded from the deletion of LSO? Help, please. Sorry not a computer person! Thank you.

  Sorry, do you remember what FAQ is that you have read? Could you give a link to it?

  Cookies are normally at your convenience by having Web sites remember you and your preferences. If rinse you your cookies every day, usually the worse thing that could happen is that you must always connect to sites, and if the site saves your preferences in a cookie, you get the standard default site settings rather than you saved your custom settings.

  There are some cookies that are a pain to re - create. For example, online banking sites often you will need to enter a code that you have received a text message or fill another challenge. If you do not keep this cookie, you will need to fill the extra step every time.

  LSO flash can be used for similar purposes and more. Some sites may use the data as your place in a game.

  I guess what I'm saying is, there is no way for us to know what is in your cookies and how important it can be to you. We could provide only general guidance on what offers the best compatibility of site (keep the cookies) relative to the protection of personal information (clear cookies) and maybe a good balance to preserve your sanity.

• HP envy 5530 Wireless: print only on the left excluded from the page. The right part shows a gray rectangle. Preview looks right

  My new printer works, but although I've marked the parameters for the letter and print preview appears correct, that the printed pages are coming on only the left excluded from the page.  On the right 1/3, there is a gray rectangle.  I really need to fix.

  Thanks again for your response.  It turned out that the printer was not to blame.  I was using the word 2016 and he had a setting of markup that was running.  When I turned is disabled, gray Panel went out.  Unfortunately, he seems to be the default setting and returned.  But until I figure out how to fix I just check the section of markup on the Ribbon and make sure it is off.

• How to exclude from the SOUL of the rules if the invoice distribution amount is < 0 (i.e. the negative amount) to the existing rule

  How to exclude from the SOUL of the rules if the invoice distribution amount is < 0 (i.e. the negative amount) to the existing rule.

  Requirement: I have an obligation to send the invoice approval group approval specified when the invoice distribution account is 4567 and charge the amount of distribution > 0

  Finished configurations:

  1. Set condition: the string value to using 4567 supplier_invoice_distribution_gl_account attribute
  2. The condition set: SUPPLIER_INVOICE_DISTRIBUTION_AMOUNT is greater than or equal to 0
  3. Definition of new rule setting the terms of the 1st and 2nd stage and also group attached to this rule approval

  Note: Approval is not required is defined for invoices IN. matched in SOUL.

  Test case:

  1. Corresponding invoice with PO (PO amount is 8000)
  2. Amount of invoice header 5000
  3. Distribution account invoice 5568 as well as the amount is 8000
  4. Inserted 4567 distribution and quantity is - 3000

  Behavior of real: system sends the approval of the Bill for approval related group account 4567

  Expected behavior: invoice approval status should be 'Not necessary', since it is a corresponding purchase order invoice and 4567 account amount is < 0

  Kindly let me know how to set the rule to exclude the ve - amount distribution associated with lines

  Hello

  Then set a rule all 3 conditions:

  If attribute SUPPLIER_INVOICE_DISTRIBUTION_PO_MATCHED = No. and the SUPPLIER_INVOICE_DISTRIBUTION_AMOUNT attribute is less than the 0 attribute and supplier_invoice_distribution_account = <> then no permission.

  Concerning

  Yvette

• Can I access the guest from the server OS (virtual machine)?

  Hi all

  Can I access the guest from the server OS (virtual machine)? I mean, I would also like to start and discovers a guest OS (VM) directly in the server as in VMware Server 2.0. I would also like to see the graphic on the server management console to manage virtual machines.

  Or do I always have at least two computers? For example, the server ESXi without GUI / frontend access and the client with vCenter, vInfrastructure, blah-blah-blah,...?

  Thanks for the replies!

  Best regards

  Joao Araujo

  You will need the Client or another tool for access (RDP, SSH) a machine separate. ESXi is a very tiny BONES.

• Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

  Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

  Hi B',.

  Buying and selling in column B

  Price of entry in column c.

  Exit in column D price

  Formula (and outcome) in column E

  If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

  E2: = IF (B = "Buy", D - C, C - D)

  If you want to delay the calculation until the amounts entered in C and D, use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

  If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

  Third version used in this table.

  

  Kind regards

  Barry

• See 5.2 management "Files and folders excluded from the roaming" Persona of the wildcards and special characters

  We want to exclude the character of AppData\Roaming\test_*.doc or AppData\Roaming\Macromedia\Flash Flash #SharedObjects and we have added to the list of exclusions, but they keep ending upward in the repository. Other exclusions are working as expected. What we should expect?

  If wildcards work, it would also be nice to be able to exclude AppData\Roaming\Mozilla\Firefox\Profiles\ * \minidumps

  Hi Eric,.

  Character does not currently support the use of wildcard characters in the configuration options.  For example, "AppData\Roaming\test_*.doc" and "AppData\Roaming\Mozilla\Firefox\Profiles\ * \minidumps" will not work.  However, I myself have tested 'AppData\Roaming\Macromedia\Flash Flash #SharedObjects' with 5.2 and it works very well.  Please note that "Files and folders excluded from roaming" not delete all existing files in the remote folder.  It simply prevents the files in the remote folder to be created in the local folder during logon, and it prevents any changes in the local folder from replication to the remote folder.  This allows to turn off the setting and return the original data if you need to.

  Please let me know if you have any other questions.

  Thank you

  Erik

• 'CREATE JAVA' error: ORA-29506: derived from the USING clause invalid query

  Hello
  
  I created a table with the following attributes:
  
  name varchar2 (200);
  LOB_DATA blob
  
  
  I loaded a java source file in the lob_data blob.
  
  I then called the SQL:
  
  create or replace and compile the java source named "RemoteCommand" using blob
  Select lob_data from str_blob_table where name = 'RemoteCommand.java ';
  
  and I get the error:
  
  ORA-29506: invalid query from the USING clause
  ORA-00936: lack of expression
  29506 00000 - "query invalid derived from USING clause.
  * Cause: The USING clause does not form a valid query.
  * Action: Correct the USING clause.
  
  
  
  If I simply copy and paste the query part of the USING clause:
  
  Select lob_data from str_blob_table where name = 'RemoteCommand.java ';
  
  I get a valid result in SQLDeveloper.
  
  
  Any thoughts on what is happening here?
  
  A few notes:
  1. it is a 8i database.
  2. it works very well on a 9i database, but according to the SQL reference for 8i, it should work as well.
  
  Thank you
  Brent

  Try to delete "select" in the USING clause, that is to say change the SELECT BLOB SUPPORT... for BLOB to HELP... The original form of the syntax of JAVA to CREATE did not expect the SELECT token must be explicitly provided. Somewhere between 8i and 9i the parser was changed to try the provided text as well as what, with SELECT prefixed. So a CREATE JAVA statement you tried working in 9i but in 8i fails because SELECT would always be added before you try using the clause as a query, resulting a SELECT duplicate token.

• NAS Lenovo IX2 disappeared from the network after a Windows update 8.1

  I have guys, after update my PC for Windows 8.1 Lenovo IX2 NAS work good for a few days, but for some reason he disappeared from the network.

  I do not have any IX2 or windows setting change. I is accessible from a browser like IE, by IP address or name (typing IX2), also the Media Center is recognized by the PC and the SmartTV.

  Windows Explorer does not show the IX after networks as usual and I can't access the mapped drives (shared forlders). Error 0 x 80070035 appears when I try to add a new network connection.

  This problem is driving me crazy for weeks! You have any how?

  Concerning

  Mariano

  

  Hello

  Thanks for posting your query on the Microsoft Community.

  I understand that you are not able to access the drives mapped network (shared folders).

  Before we continue, we need to know if you have made any changes on the computer before this problem.

  I suggest you disable the settings of the firewall and antivirus software to see if it helps.

  I suggest you check out the link below to fix the problem.

  https://social.technet.Microsoft.com/forums/Windows/en-us/028a3d13-f571-49E0-abe7-1ca61fb92082/error-code-0x80070035-the-network-path-was-not-found?Forum=w7itpronetworking

  : Referring link for problems of collective housing in the Windows below

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Please let us know if you need help with Windows. We are happy to help you.

  Thank you.

• ORA-00904 on CREATE TABLE with a virtual column based on the XMLTYPE content

  Hello
  
  This is another one for the gurus of the syntax...
  
  Try the following, fails with ORA-00904: "MESSAGE". "' GETROOTELEMENT": invalid identifier

  CREATE TABLE XML_TEST_VIRT
    (
     MSG_TYPE         GENERATED ALWAYS AS (MESSAGE.GETROOTELEMENT()) VIRTUAL,
     MESSAGE  XMLTYPE             NOT     NULL,
     IE906    XMLTYPE             DEFAULT NULL
    )
     XMLTYPE COLUMN MESSAGE STORE AS SECUREFILE BINARY XML
     XMLTYPE COLUMN IE906   STORE AS SECUREFILE BINARY XML
  /

  While it succeeds

  CREATE TABLE XML_TEST_VIRT
    (
     MSG_TYPE         GENERATED ALWAYS AS (EXTRACT(MESSAGE, '/*').GETROOTELEMENT()) VIRTUAL,
     MESSAGE  XMLTYPE             NOT     NULL,
     IE906    XMLTYPE             DEFAULT NULL
    )
     XMLTYPE COLUMN MESSAGE STORE AS SECUREFILE BINARY XML
     XMLTYPE COLUMN IE906   STORE AS SECUREFILE BINARY XML
  /

  The GETROOTELEMENT from SYS member function. XMLTYPE is stated as "PARALLEL_ENABLE DETERMINISTIC" the method called is not the problem, as evidenced by the 2nd case.
  Using the MESSAGE column that is of type XMLTYPE directly seems to be the problem. But the question is "why." The result of the EXTRACT function is of type XMLTYPE and call his works of members, the column is also of type XMLTYPE still call its members fails...
  
  Thanks in advance for any ideas on that.
  
  Best regards
  Philippe

  Going on the means to go far, far back.

  2003 re: function getRootElement ORA-00904

• Get the VM from the list of virtual machines serial number?

  Property.  I have been breaking my head against that for hours and finally gave up and ask me for help.  I have this function below that I found at http://www.peppercrew.nl/index.php/2011/04/get-virtual-machine-bios-serial-number/.

  It works fantastic for an individual VM, however I have a list of 250 VMs that I need this information, because our management software requires a unique serial number for each virtual computer.

  I tried to edit the script to import from a .txt file and information through a foreach loop and am just not having any success.  What I am doing wrong?

  function Get-VMSerial{
  
  $VMList = Get-Content C:\VMList.txt    foreach ($VM in $VMList){
          $VirtualMachine = Get-VM $vm.name
  
      param([VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]$VirtualMachine)
   
      $s = ($VirtualMachine.ExtensionData.Config.Uuid).Replace("-", "")
      $Uuid = "VMware-"    for ($i = 0; $i -lt $s.Length; $i += 2)
      {
          $Uuid += ("{0:x2}" -f [byte]("0x" + $s.Substring($i, 2)))
          if ($Uuid.Length -eq 30) { $Uuid += "-" } else { $Uuid += " " }
      }
   
      Write-Output $Uuid.TrimEnd()}
  
  
  
  }

  How to watch your CSV?

  You have a header of column in there? Something like

  Name

  VM1

  VM2

  In this case, you can change the last line

  Get-VM (Import-CSV C:\VMList.csv | Select -ExpandProperty Name) | Select Name,BIOSNumber
  

• Update updated the columns with null are excluded from the DB adapter

  Hi all

  My fusion system interacts with DB2 using the DB adapter.

  I have a script that I need to update a flag in the table after completing my bpel workflow. But by updating the value of indicator to "Processsed", there are other columns with a NULL value.

  How to solve this problem. I don't want to do, the other columns should not be alerted.

  Thank you

  Richa

  Hello

  The issue has been resolved. In fact, I've updated the update statement, excluding items that couldnot be updated top link mappings. I had to create a new adapter and it worked.

  Concerning

• How we can print the page numbers for the shape of the TABLE OF CONTENTS when her excluded from the form page count?

  Hi Experts,

  We have the TABLE OF CONTENTS, followed by 100 forms totally 215 pages.

  We checked in the exclusion of the option of number of form page SUMMARY form at the level of the group.

  Followed forms of TABLE OF CONTENTS forms all use FORMSETPAGENUM rule at the bottom of page.

  the first form followed by TABLE OF CONTENTS form the number starts page 1 of 215 and the last form closes at 215 215.

  Now, I want to print the Page number of SUMMARY form only.

  How can do us?  Any thoughts?

  Kind regards

  RAMAN C

  Hello Raman,

  I guess that you included "Exclude the number of pages" option in the form of table of content (TOC).

  There is a limitation in the studio. The functions of page number (PAGE NUM OF FORM / FORMSET PAGE OF NUM) will be ineffective when we choose the option "Exclude the number of pages" in the form of table of contents. Therefore, you was not able to print many pages of form as a table of contents.

  The only way to print the number of pages is to deselect the option "exclude the number of pages. Then you can print the number of pages in the table of contents in the form of table of contents normally. However, this number of pages in the table of contents will add to the Total number of pages form set. The number of pages all forms can be controlled by Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]

  Kind regards

  Mahesh

• Default settings from the create a virtual computer Wizard

  I still want to see the addition of models to use with the creation of a new virtual machine. Size of the disk and the type of network, etc. If nothing else I would be grateful to have the opportunity to set the checkboxes and radio buttons to the way I ALWAYS create a new machine. I don't use NAT for the network. Never use 2 GB pieces etc.

  Feature request is open. Thank you.

• How a page can be excluded from the number of pages but still displayed in the order?

  I want to include a few pages in pdf format, but not include them in the number of running pages so that I can sychronisé real page numbers with the page running, count and therefore go to correct page. Is this possible?

  All pages in a PDF file must have a number, but you could affect pages "excluded" a different pattern (for example, Roman numerals), and then renumber the rest in order to exploit where you left it. Keep in mind that pages will still take their logical position when you specify ranges of printing etc..

  Not normally a separate paging standard is made by software to create the PDF file first place, but you can do this via the menu options/context on the page thumbnails Panel in Acrobat.