Similar Questions

• Load default settings from the BES server application

  Hello

  Is there a way for the BES to say my request that the default settings to use? Now, after loading my application a few textbox fields to be filled in before anything else happens, and I want load the default settings/text of the BES on blackberry. Each BES that will use the application will have different values by default, so hard-code in the application is not an option.

  I hope that this is possible before the BES can publish/push demand for blackberries.

  So far, I looked in the COMPUTER strategies, but have not found what I'm looking for (maybe I'm looking in the wrong place).

  Thanks in advance

  You can put custom elements to your TI-policy, aski your admin bes on the details.
  The ITPolicy class allows easy access to these elements with Integer, String, Boolean, Byte, and Bytearray being supported.
  I have successfully used this mechanism on a couple of apps.

• hibernation has disappeared from the list on my computer

  Hibernation had disappeared from the list on my computer, after that I downloaded an anti virus nod 32

  You can re-enable the file by using the tutorial below.
  Make sure you read two method that tells you where the file hibernation during the disk cleanup process.

  Use this tutorial:
  http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  Enable or disable Hibernation

  Excerpt:

  Information

  If you accidentally deleted theCleaner of Hibernationfile in disk cleanup and caused your mode standby or hibernation hybrid to stop working, then you accidentally disabled the hibernation file. The file hibernation (hiberfil.sys) size will be the same as the ofinstalled of the amount of RAM. For more information, see: Microsoft Help and Support: KB929658 andMicrosoft Help and Support: KB928897
  Note

  If you cleaned (disabled), allhybrid andHibernate settings will also be deleted from theAdvanced Power Options window. You will still be able to use normalsleep mode if.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• ORA-54017: excluded from the regime of virtual columns UPDATE Operation

  Referenced to

  ORA-54017: excluded from the regime of virtual columns UPDATE Operation

  There are problems with v4.0_4.121.1.0 knew?

  Thank you

  Sorry, but after setting StoreGeneratedPattern to Computed in the EF model I have the same problem.

  Thank you

• confusion on the default settings of the territory.

  During the installation of R12.0.4 should I do to select Saudi default of Arabiaas. I do the installation in Saudi Arabia with the Arab patch NLS.
  a characterset more thing if I select UTF8 it supports AR8MSWIN1256, otherwise I selects AR8MSWIN1256 for databases and application of defined character.

  Hello

  During the installation of R12.0.4 should I do to select Saudi default of Arabiaas. I do the installation in Saudi Arabia with the Arab patch NLS.

  Profile for the language and territory options are configured at the site level, when you run a quick installation. The language that you choose as the base language is used for the linguistic profile. The default settings for the date and number formats are from the territory profile setting. So, if you want to use the territory of Saudi Arabia, select here. Otherwise, keep it as it is (I would say you keep the default value and change later).

  In version 12, quick installation installs only American English. If you plan to use languages other than US English in your installation, read the information in the Oracle Applications NLS Release Notes and all the necessary measures for the installation of the translated software.

  Installation Guide for Oracle Applications: Quick help install - Page 5-6, put in place the national language Support (NLS)
  http://download.Oracle.com/docs/CD/B40089_09/current/Acrobat/120oaig.PDF

  Note: 550206.1 - Oracle Applications NLS Release Notes, version 12.0.4
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550206.1

  a characterset more thing if I select UTF8 it supports AR8MSWIN1256, otherwise I selects AR8MSWIN1256 for characters of database & application defined.

  UTF8 support Arabic characters, it should be OK to select the UTF8 character set.

  Note: 393861.1 - Guide of globalization for Oracle Applications version 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=393861.1

  Kind regards
  Hussein

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows Vista x 86, and Windows 7, losing by default settings of the printer after install updates day or end of remote session.

  We have been troubleshooting this issue for a while and we didn't have a patch even if it's a known issue.  When a workstation is set up as a network printer, even if the default settings of Windows (xps document writer) has been removed, the workstation will lose the default settings of the printer after that remote desktop sessions or windows updates have been installed.

  We tried MS FixIT and a registry mod that changes the order of the printers without success.

  We are hoping that there is a fix available before finalize us our Windows 7 image for deployment.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]
  "DebugOptions" = "2048".
  'The documents '=' '
  "DosPrint' = 'no '.
  "Load"=""
  "NetMessage' = 'no '.
  'NullPort' = 'None '.
  "Programs"="com exe pif bat cmd.
  "device"="no printer name1, winspool, Ne01:

  In our reg mod, we have changed the position of the device at the same time Ne00 and Ne01 without having an effect on the loss of the default printer.  The mod set the default printer, but the settings do not stick.

  I hope there is a fix for this, in addition to a logon script, because our users are on several remote sites.

  ISA1 MCSE

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  Hello

  We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• Restore the default value from the drop-down list

  Hyperion Inreatctive reports.

  I have an embedded in a dashboard report.  I drag the lists that filter the report.  Filter feed results and it works fine.

  I want to put a command button on the dashboard that restores the default values from the dropdown lists.  I have a selection in each drop-down menu, 'all '.  "All" is the default value.

  For example, for the year

  drop_Year

  for the region:

  drop_Region

  What command should I put on the command button that any value is displayed in the drop-down lists of this command, restore it to "all"?

  
  

  Watch the Select() method

  w

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium

• Can I access the guest from the server OS (virtual machine)?

  Hi all

  Can I access the guest from the server OS (virtual machine)? I mean, I would also like to start and discovers a guest OS (VM) directly in the server as in VMware Server 2.0. I would also like to see the graphic on the server management console to manage virtual machines.

  Or do I always have at least two computers? For example, the server ESXi without GUI / frontend access and the client with vCenter, vInfrastructure, blah-blah-blah,...?

  Thanks for the replies!

  Best regards

  Joao Araujo

  You will need the Client or another tool for access (RDP, SSH) a machine separate. ESXi is a very tiny BONES.

• How to restore the default values for the appearance of my computer settings?

  I was screwing my Windows 7 (64 - bit) advanced appearance settings Toshiba laptop and I can't understand how it get back all default settings.  Can anyone help?

  Right-click on your desktop and choose personalize, then click on the "Windows 7" theme in the Aero section.  It is the default theme and resets all other parameters related appearance - including colors, fonts, and styles.

• I restored Firefox to its default settings, but the slowness, crashing and nonresponse are not resolved

  Hello colleagues-Firefox users.

  I followed the Commission indicated in the Support article on the slow, crash, etc. by restoring Firefox to its default settings. But the problems go away. The remains of the slow browser and still gives me error messages on a non-compliant script or plugin and crashes. To make matters worse I don't see the menu on the top tool bar items, I was so used to using, such as file, editing, display, etc.. I very often used the display menu to zoom on texts that are too small for me to read. Now I can not do. I tried to drag icons in the menu on the upper right of the page on the top tool bar above the address bar, but it is not the same thing as what I used to use before, and there is no File, Edit, View, tools in the menu icons. So now I see my g-mail Inbox in tiny little characters. I tried to use the Magnifier suggested in the troubleshooting of support page, but it's too heavy so I gave up.

  Would someone kindly please help me with these questions? Thank you much in advance.

  Kind regards
  Tom Graciano (globmart)

  If the zoom is your problem so just try to use the keyboard.
  Hold down the control (Ctrl) key + "+" to zoom in any window.
  Otherwise if the crash occurs suddenly so just try to uninstall and reinstall Firefox with the update. You brought a lot of changes manually, it might create problem. So reinstall once and check whether it is at your service.

• How can I change the default settings of the line spacing in Word Pad to: unique, space no space after a paragraph

  I need to change the default line spacing values to: simple space and NO space after a point, but it doesn't seem to be a way for that.
  Thanks for the tips.

  Press Ctrl + A to select your entire file, and then click the paragraph Options (the button at the bottom right in the paragraph on the Home tab group).  Uncheck "Add 10pt space after paragraphs."

  To create new documents this setting is already selected, follow these steps:
  1 - Create a new empty file, then follow the steps above to disable the spacing option.
  2 - save the file in the folder C:\Windows\ShellNew with a file name as "new WordPad file.
  3 - follow the steps on this support page to create a link from the context menu to create a new file based on this template: http://support.microsoft.com/kb/140333
  4. whenever you want to create a file with this option already set, just right-click on your desktop or in a folder and choose New > WordPad file.