Oracle 10 g in 32-bit oel and vmware
I am new to Oracle and I try to install oracle 10 g R2 (Single Instance) in OEL use VMWARE in my laptop. I now have a single host in my vmware.Can I install via DHCP or should I have to configure the IP address and correct in/etc/hosts
right now my hosts file contains:
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
ConcerningRenjith Malet
Renjith Madhavan wrote:
I am new to Oracle and I try to install oracle 10 g R2 (Single Instance) in OEL use VMWARE in my laptop. I now have a single host in my vmware.
Can I install via DHCP or should I have to configure the IP address and correct in/etc/hosts
right now my hosts file contains:127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6
Concerning
Renjith Malet
You must configure the IP address of your virtual machine.
Tags: Database
Similar Questions
-
Oracle 11 GR 2 64 bit and 32 bit client together?
Hello gurus, a question for you...
We install FINS 9.1 on tools 8.51 on Windows 2008 and with Oracle 11 g 2. Our issues, that's the best configuration?
-client 64 bits and 32 bits 11 GR 2 (for application / batch server)? It would work in reality?
-GR 11, 2 (even if she is not certified) 32-bit?
I would gladly appreciate advice or comments. Thank you.
AndyYou will need to install Oracle 64-bit (for database - database of 32-bit software installs not on a 64 bit OS), and since you are on Windows, you also need Oracle 32-bit client (unlike the previous version, there is no 32-bit libraries shipped in 64 bits 11 GR 2 database software). It is fully certified and works very well.
Nicolas.
-
installation 1oglinux on oel using vmware and vncserver
I am installing oracle 10g on OEL use vmware, winscp vncserver now the problem is with the oracle_base
How can I set the oracle using the export base command
I m by issuing a command to export ORACLE_BASE = / u01/app
but when I run the installer of the oracle is installed on the base directory?
Why is it so and how can I rectify?987018 wrote:
can you please type the command needed for thisas what I should write now?
and where should I issue the command export ORACLE_BASE = 01/u01/appThe same command line session where you launch runInstaller.
the oracle user? or the root user
You answered my previous question... If you were reading and following the Installation Guide, you'd know that you shouldn't do everything as root.
-
Migrate Oracle RAC 10 g 32-bit to 64-bit machine cold sauvegardΘ
Hi people,
For the moment I list possible migration strategies and one of the options I'm considering is to stop the Oracle 10 g 32-bit RAC on the 32-bit computer and copy data files to another machine 64-bit (oracle 10 g 64 bit RAC installed). Given that I have currently is the test installation available (will) be available later on this month, I would like to know if it is interesting to explore this method was further.
The documentation I've found is to a single node (http://docs.oracle.com/html/B13831_01/ap_64bit.htm#CHDCDAGE) - someone has already tried this for a cluster of more?
Thank you...Even if it of the CAR or not RAC, in my view, the tasks of database are same
(1) set cluster_database = false
(2) upgrade start
(3) $ORACLE_HOME/rdbms/admin/utlirp.sql
(4) start normally
(5) run ORACLE_HOME/rdbms/admin/utlrp.sql -
Migration Oracle 10 g 2 32-bit to Oracle 11 g 64 bit options
I have an Oracle 10 g 2 32 bit that needs to be upgraded to Oracle 11 g 64-bit:
What are some of the options of upgrade gr 10, 2 of Oracle 32-bit database to Oracle 11 g 64 bit?
Can I export 10 gr 2 32 bit and import it on Oracle 11 g 64 bit?
Thank youyakub21 wrote:
Can I export 10 gr 2 32 bit and import it on Oracle 11 g 64 bit?Yes
-
Connection from Oracle to Sql Server (64-bit on Windows 2003)
Hello
I want to install heterogeneous connectivity between our Oracle 10 g version 10.0.2.0.1 (on 64-bit Windows 2003) to a SQL Server on another computer on the network. I found that HSODBC is removed, and that this is is not supported on 64-bit Windows systems. So, I couldn't make it work obviously.
It is even possible to set up a heterogeneous connectivity in our situation (using DG4ODBC or something?)
If so, could someone point me in the right direction on where to start?
Thank you!
(I'm not a dba, previous attempt using hsodbc cost me two weeks before finding out that it doesn't even work...)
Edit:
Oh, and it is possible to display the Metalink notes as (Metalink Note: 361676.1, is generic connectivity available on The LINUX or Windows 64 - bit Platforms?) without a support contract? Or only customers with a support contract have the right to know that some features are not available?
Published by: user574699 on March 18, 2009 06:24According to your last update, your actions are:
1.) upgrade Oracle on SERVER1 to 10.2.0.4.0-online Yes
2.) DG4ODBC is not certified to run on SERVER1, then I should install on SERVER2 tell you? That there is no installed Oracle... ?
Yes, install it on the server of SQL Server 32-bit.The gateway comes with a complete Oracle SQL * Net listener. Just so install the 32-bit to SQL Server and configure the Oracle listener as well as the bridge and the ODBC driver.
Now on the Oracle database server adds a TNSNAMES file. Entry of ORA that points the listener to the Oracle of the gateway on the SQL Server computer. The link of database within the 10 g, which oracle databased then connects using tnsnames.ora alias in the SQL Server computer that has an active Oracle listener that generates connection DG4ODBC. DG4ODBC executable load DG4ODBC configuration file and connects to SQL Server you have configured.The Oracle gateway are very flexible. You don't need to install them on the Oracle database machine. They can be installed independently; even on a 3rd machine if you do not want to touch the SQL Server computer. In this case, the scenario is similar as described above; only difference now is the driver ODBC to connect to a SQL Server computer on a remote host.
-
I've just updated FF 14.0.1 (Mac 10.6.8) and now netflix won't work. He is asked to restart in 32-bit mode and I changed in the Get Info to 32-bit. No luck.
Yes, I have the same problem. Silverlight 4 does not work in Firefox 14.0.1. Used to use only "restarting in 32-bit mode", but now, who is caught in a loop without end. Silverlight 5 will work, but the video is choppy so badly that it is very bad. I think it's a fall frames in all directions.
Someone needs to fix this problem yesterday. -
Can I put an Equim A110-233 with a 64-bit processor and if so which?
Hello
can I put an equim a110-233 with a 64-bit processor, and if so which are compatible.
Thank you
DarrellHello
Update CPU is always a difficult history.
I think you have a good chance to upgrade the processor as long as you use the CPU of the same CPU family.You could check what processors have been used in other portable Satellite Equium A110 and then you could choose the most powerful CPU used in this series.
In addition, you should check your chipset type. On page Intel you can find details and which processors are supported by this chipset.
-
Portege R500 upgrade to Win 7 64 bit: lost and no scrolling touchpad driver
Dear all,
I have updated my portege R500 WIndows 7 64-bit OS and had the following problems:
1. as a first step the touchpad scrolling has worked well (with no driver installed) but then it works more... so I tried a driver but
2. There is no driver for the touchpad (Alps) which is recognized as a compatible mouse PS
BTW, uninstalling and reinstalling didn't work and I searched a lot on the web but found no solution.I downloaded the drivers for VISTA 64 bit, is it safe to use?
Appreciated advice, thank you.
Simone
Hello
> I downloaded the drivers for VISTA 64 bit, is it safe to use?
Yes, it s safe you can try to install the drivers for the touchpad for Vista in the worst case, you will get an error message that this driver is not compatible or will not work.But look man there is Win 7 Alps and Synaptics touchpad drivers for Win 7.
The drivers were released for other series of laptop.
Check the Satellite L500 area for exampleI have Win 7 64 bit drivers.
Synaptics v14.0.11.0
Alps Electric v7.x5.303.117Welcome them
-
I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.
lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.
I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.
So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.
-
I want to have both versions because my pc is 64-bit, but he can't function with
Module LabVIEW Control Design and Simulation
and
LabVIEW MathScript RT module
This funtion two apps with 32-bit lab VIEW 2014SP1
also, in the forum, I see that it may be possible, check on question number 6
"Q: I have 32-bit LabVIEW and LabVIEW 64 bit installed on the same 64-bit machine? ."
A. Yes. »http://digital.NI.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98
Help, please
I suspect that most of the facilities of LabVIEW on Windows consists of LabVIEW 32 bit running on an operating system 64-bit Windows (for the most part, Windows 7, 8 and 10). As you noted, all the toolboxes have 32-bit versions, and many do not have 64-bit versions (although that is changing). If you don't need the memory of the large model (and have the memory to support), I recommend sticking with 32-bit LabVIEW. You will have less room for error and Confusion.
Bob Schrede
-
Hello
I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please
Thank you.
Hi @SushmitMazumdar ,
Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.
Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.
I hope this helps.
Thank you.
-
Trying to get SCCM 2007 deployed. However, could not succeed prechecks for Management Point. Even though I have BITs enabled from IIS in Add / Remove components. This does not seem to fix this error. I have re-installed Win2K3 to see if that solves the problem, but no luck. Google search and exhausted. Now need some answers of MS. Pas able to determine the exact reason for the BITs not detected.
Here it is the errors
***********************************************************
(BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not installed and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or the Setup program could not verify the remote IIS settings because IIS common components were not installed on the site server computer. ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.
***********************************************************
(BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not configured properly and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the computer site server. ConfigMgr requires BITS be installed and active in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.***********************************************************
and below too although I sent this patch. Cable. :)This software update addresses several MMC errors that may occur when you run the Configuration Manager console. This update must be applied if one of the following conditions occur: Configuration Manager console stops responding when the host computer is low on available memory, display errors in context menu on the console home pages, or inconsistent after drag - move fail. More information on this update is available at: http://go.microsoft.com/fwlink/?LinkId=98349.
Hello
The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en/configmgrgeneral/threads
-
I have XP Pro 32 bit COA and I need to download & install XP Pro 64 bit
I have XP Pro 32 bit COA and I need to download & install XP Pro 64 bit
Please I need the link to download
Thank you
Cannot be done. The 32 bit license that comes with your PC is valid for a copy of 32-bit Windows.
-
I have a windows xp 32-bit sp3 and a 3CRUSB10075 com 3, which will not recognise wpa2-psk
I havea PC with Windows XP 32-bit SP3 and my 3CRUSB10075 Wireless will not connect to my modem that has wpa2-psk, it does not even as an option
I would hazard a guess that this particular wireless does not support this type of encryption. You should check your documentation and should confirm. You have no other choice than to set your router to a supported type.
I hope this helps.
Maybe you are looking for
-
I have a laptop Lenovo who was my daughters. I use it very well, but I can't figure out how to get Outlook Express on it as if I had on my old office. So, I was looking for how to do that I have seen that this version of Windows XP Professional SP3 w
-
search result opens by double clicking on a folder
Don't remember not when this started, I missed something
-
My DVDRW DRIVE will not write to disk
My DVD - RW drive will not write to disk, it is only recognized on my computer as a DVD ROM and CD - ROM only. I looked in Device Manager and there is no question mark by it and he says it's working properly, I had it works normally about 2 weeks ago
-
How to connect EA6500 to the phone line, but with no modem
Hi all I just bought an ea6500 to replace my old router billion and up to now all I had to do is plug my phone line directly into the port ' phone line in "on the back of the router billion. But according to me, there is no "phone line in" port on th
-
SL500 virtualization and hardware
I bought SL500 today, and to my surprise, I can't enable hardware virtualization in the BIOS. There is no option. Processor which is inside supports something like this (checked on the Intel Web site). Accordint to a few other test machine, takes car