Oracle connection non-oracle

Similar Questions

• FIPS. You can configure an ASA in accordance with FIPS to reject all connections non - FIPS Anyconnect

  Hi dude, is he not automagically to refuse any connection Anyconnect an ASA compliant FIPS if the Anyconnect client is non-FIPS compatible?

  Any help, ideas or thoughts are appreciated because I can't seem to find something to think about as you can.

  Kind regards

  Paul.

  Hi Paul,.

  By default, the ASA specifies the non-compliant FIPS RC4-SHA1 for the connection. To comply with FIPS, you must make sure that a compatible encryption FIPS is the first specified in the list of SSL encryption. Otherwise, the DTLS connection fails. In addition, we recommend that you remove all non-FIPS list ciphers in order to ensure that the connection failed does not occur.

  In ASDM, go to Setup > remote access VPN > advanced > settings SSL to specify the types of SSL encryption. In the encryption area, move a FIPS compatible encryption at the first position in the list.

  If you use CLI, use the encryption ssl from the global configuration mode command to order the list.

  Kind regards

  NGO

• Slow connection, non-persistent desktops... of roaming profiles?

  OK everyone I have a good, we use view 4.0.1 build-233023 and when we use no sticky Windows XP Pro 32-bit desktop computers, we run into the question of a slow connection during the period where Windows applies the user 'custom settings '.  The delay is not terrible, but it will cause colic.  I'm assuming that this delay occurs because the user does not have a profile on the newly created virtual machine.

  We experimented with roaming profiles AD and so far there is no help.  Does anyone have ideas to avoid the "custom setting event?  We would really like to non-persistent work stations, like those persistent management is not really feasible in view 4.0.

  Thanks for the help everyone!

  I had this problem and it took me about two months to get my picture gold until I was satisfied by the research, the trial & error and much rebuilt.

  I used a combination of non-persistent computers, folder redirection, of roaming profiles and I have disabled all the tricks of custom setting (http://support.microsoft.com/kb/238441) and now my pictures are very alive and work perfectly for my environment (school).

  I suppose that you have set records in your goldy and optimized it for sodomy.  Because before I did that my image has been sluggish on login.  The performance difference between my old image and the new image is like night and day.

  Good luck!

• Type of connection NONE

  Why when the connection to the database of the client computer using tnsnames.ora without defined the SERVER parameter in tnsnames.ora connection, my connection type is listed as NONE when looked at in session$ v?
  
  If the connection type is not meant to be SHARED so DEDICATED is not defined and shared server is available?
  
  
  Here the tnsnames.ora
  
  PROD_SHARED =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (Host = 192.168.1.45)(Port = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = PROD)
  )
  )
  
  
  
  # Select user name, the server session $ v where lower (username) = "IVsWebBrowserUser";
  
  IVSWEBBROWSERUSER NONE
  
  
  Linux x 86, 10.2.0.4, SqlDeveloper 2.1

  Hello

  If you run a dedicated server, SERVER value will always be DEDICATED, involved, you have a dedicated server process at your session. If you run a shared server, your session is sharing the server with other sessions process and if your session is not currently in a call to the database, the SERVER will be ZERO, indicating that the session is not currently have a process server allocated from the pool. If you are looking for while this session makes a call to the database, you will see that the value of the server is SHARED.

  Hope that helps,

  -Mark

  Published by: mbobak on February 1st, 2010 19:21

• I can not connect to or finding wireless networks

  I really appreciate any help you can give me for this problem.
  While I tried to include all the relevant details, please let me know if you need more.
  I have these specifications or running programs
  • Sony Vaio VGN-FE865E
  • MS Windows Vista Home Premium 32 bit SP2
  • A/b/g/n wireless D-Link router
  • Intel (R) PR0/Wireless 3945ABG Network Connection, version 10.6.0.29
  • Spybot S & D
  • AVG Free Antivirus
  Recently, I removed these products with REVO Uninstaller:
  • All click DVD products
  • Windows Media Player

  I will have these disorders:

  • When I "manage network connections", none are present now while 10 + networks should be there.
  • When I "diagnose and repair" the wireless network it says: "this computer is set to connect manually to"Netgear F8"" is not a router I know or preferred my network
  • When I press the update under "connect to a network", the thing that looks like a trash icon, but turn it show it is refreshing, not is nothing more

  I did:

  • under the command prompt, I did a sfc/scannow (full audit; Protection of resources found no breach of integrity ;)
  • I tried to diagnose the connection, it keeps telling me to change the network settings
  • Wireless adapter found under "Device Manager": device is turned on, works fine, up-to-date and has no resource conflicts
  • I have reset, turned on and off and enabled the network card

  PS. connection to the preferred network via LAN internet gives computer problem

  OK, so it has been set to 0 (the DHCPNode) and I changed it.

  What strikes me as odd, however, is that earlier tonight the problem cleared up. I don't know what has changed.

  I noticed it happened because I was playing a game online (with LAN) and jumped rope, but I was able to continue playing.  During the inspection of more I noticed that all the saved networks were back and I connect to my local network.

  I then remove the Netgear network recorded, that I didn't.

  Again, thank you for your time and help,

  Sincerely,

  Lance

• mgmt vCenter/vCSA and non routable network

  How are they managing get you all vCSA connected non-routable management network without burdening the network mgmt vCSA? I have the VLAN for all networks (mgmt, vmotion, storage) and network of the vm on VLAN 0. When install vCSA you use a routable IP address, but after that, I have to add the network mgmt to the vCSA in order so that it connects to the host, but it does not seem like the right way. vCSA with extra vnic is not supported.

  How do you manage this?

  Well, you need to sort out why one needs a management not routed network. In case it is a safety requirement, you would probably violate it by multiple your vcenter.

  In order to manage your vCenter inventory you would be obliged to get in this isolated NET or create a safe / trust / hardened machine multi-homed "jumpbox" that could be used for management activities.

• ADDM report is not produced by SQL DEV if connected 4.0 user is not SYSDBA privilege

  Hello-

  SQLDEV 4.0 (early adapter), I logged in as a user with SYSDBA privileges. But ADVICE given and run DBMS_ADDM granted and "select any dictionary" granted, etc..

  Then I go in the menu view-> DBA--> Performance-> automatic database diagnostic monitor

  Select report ADDM in the choices available.

  Off the menu 3 options: summary, results and report ADDM, I can see the first two, but I get a grey screen for report ADDM.

  ^^^^^^^^^^^^^^^^^^^^^

  If I do exactly the same thing but connection as SYSDBA, ADDM report can be produced and can be seen. So, the question is the lack of subsidies and privileges.

  ^^^^^^^^^^^^^^^^^^^^^^

  The goal we are pursuing in our shop is to give developers to work with reports of the ADDM by connect non-SYSDBA user.

  ^^^^^^^^^^^^^^^^^^^^^^^^

  Please tell us what privilege must be granted to get this working for a non-SYSDBA connection

  The same user can successfully run $ORACLE_HOME/rdbms/admin/addmrpt.sql and produce files with ADDM full report. But not able to get the ADDM of SQL DEV 4.0

  Thank you

  VR

  Hi RV,.

  The security model for the DBMS_ADVISOR package means that a database user can only generate reports for ADDM tasks created by this user. To create a task SQLDev ADDM, invoke the action "Performance / automatic database Diagnostic monitor-> run ADDM. Once this is done, you should be able to generate and view report 'ADDM' for the new task.

  In order to accomplish the above, you should probably add the following privileges to your user name: -.

  Executer run on dbms_workload_repository, Advisor, select any dictionary and select_catalog_role

  I hope this helps.

  Best regards

  Phil Richens.

  SQLDev development team.

• need to configure a connection wireless network with static IP address to make a panasonic wireless display of work on the virtual machine

  Hi, I'm new to macs and Fusion. I have a MacBook Pro 13 mid-2009, running 10.5.7 and Fusion 2.0.5, running Win XP Pro SP3 as the virtual machine (not in a bootcamp partition separate). I added a second network as a bridged network adapter (first one is set to NAT). I'm trying to connect my wireless panasonic (802 11b) to the virtual machine display, as I do on my old sony PC. Normally, I turn on the wireless on the PC, find the network wireless in Win XP and configure my SSID and necessary of static IP address and configure the NIC to search only ad-hoc connections (non-infrastructure). I also turn off the firewall so that it can work. There is a panasonic program runs on the PC (which I also installed on the virtual machine) makes it all happen once I have the connection. So the place that seems to be stuck, it's that I can't find a wireless to configure network adapter since--what the VM is a NA standard, so there is no place to specify the SSID, ad-hoc and disable the WEP key. Someone has ideas how to go beyond my current state?

  In addition, the panasonic only works at 800 x 600 for the display resolution, so it will automatically change the graphics settings. I guess that's not a problem on the VM, but thought I would ask in advance in case someone sees a problem with it.

  Thank you very much.

  Larry

  If the only way you can connect to the device is via WiFi, then you will need to provide your own WiFi USB network adapter to the virtual machine because Fusion presents only the network card Ethernet wired to the Virtual Machine, regardless of the host network adapter is the main map.

• SQL dev to connect via odbc to non-oracle db

  Question asked to me regarding the use of sql dev to connect to a Turbo Image databsae running on a HP-3000 through odbc.  They have odbc drivers, but the front-end client is no longer supported and are looking for an alternative.  I've never used Dev of SQL to connect to a non-oracle database, but it seems as it should, maybe with the OTG for odbc.

  Ideas?

  We are a java application. Yes JDBC.

  And we offer only 3rd connectivity to help migration of Oracle. Currently we do not support Turbo-Image of database migration to Oracle.

  There are however several ODBC database generic tools out there.

• dblink oracle to postgres with dg4odbc. ORA-28500: connection between ORACLE and a non-Oracle system returned this message: ORA-02063: preceding line

  Hi, I am creating the database link from a database of Oracle 11 g PostgreSQL with DG4ODBC and unixODBC

  My configured for /etc/odbc.ini

  [PostgreSQL]

  Description = Test to Postgres

  Driver = psqlodbc

  Trace = Yes

  Trace file = /tmp/sql.log

  Database = danieldb

  ServerName =

  UserName = SA

  Password = password

  Port = 5432

  Protocol = 6.4

  ReadOnly = No

  RowVersioning = No

  ShowSystemTables = No

  ShowOidColumn = No

  FakeOidIndex = No

  My configured for /etc/odbcinst.ini

  [ODBC]

  CommLog = 1

  Debug = 1

  FileUsage = 1

  Layout common = No

  Trace = 1

  [psqlodbc]

  Description = PostgreSQL ODBC driver

  Driver=/usr/lib64/psqlodbcw.so

  CommLog = 1

  Debug = 0

  FileUsage = 1

  My configured for /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora

  HS_FDS_CONNECT_INFO = PostgreSQL

  HS_FDS_TRACE_LEVEL = 0

  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so

  Set ODBCINI=/etc/odbc.ini

  My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora

  Listener =

  (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PostgreSQL)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)

  (PROGRAM = dg4odbc)

  (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib')

  )

  )

  My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora

  PostgreSQL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))

  (CONNECT_DATA =

  (SID = PostgreSQL)

  )

  (HS = OK)

  )

  I'm trying to created public database link:

  CREATE DATABASE LINK PUBLIC 'orapos' CONNECT to 'HIS' IDENTIFIED BY 'password' USING 'PostgreSQL ';

  When I used tnsping

  [root@oracle-poc admin] # tnsping PostgreSQL

  AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on May 16, 2013 20:34:19

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/XE/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))

  OK (0 msec)

  and finally, I try to use the database link:

  "SQL > select * from tabel2"@orapos ".

  2;

  Select * from 'tabel2"@orapos '.

  *

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  ORA-02063: preceding the line of ORAPOS

  What wrong with my setup?

  Thank you and best regards,

  Daniel

  Daniel,

  The problem is that you are using the ODBC Postgres driver for the HS_FDS_SHAREABLE_NAME parameter, but this must be an ODBC driver manager and not the driver ODBC Psotgres.
  Go to the.

  http://www.unixODBC.org/

  Click the 'Download' and follow the instructions to download the 2.3.1 pilot and make libraries and programs.

  Once this is done, then use the driver as parameter HS_FDS_SHAREABLE_NAME Manager, for example-

  HS_FDS_SHAREABLE_NAME =/home/odbc64/unixODBC/2.3.1/lib/libodbc.so

  Depending on where you install it.

  Kind regards

  Mike

• Unable to make the connection with oracle (database sqlserver) non-oracle

  We are unable to connect with the database of sql server after you have created the dblink to the oracle server.

  tnsping everything works very well between the oracle and SQL Server for database, database

  Please provide us with the solution for this problem.

  The problem is that the HS_FDS_CONNECT_INFO in theinit .ora bridge was not properly configured.

  Using the format-

  HS_FDS_CONNECT_INFO =//.

  has permits the connection works.

• Forgotten password URL in OIM 11 g 2 PS1

  I want to launch the IOM has forgotten the flow of a form of connection non-Oracle password.  I can't understand what this URL should look like to start this workflow.

  Doc ID 1503343.1 talks about the URL for password forgotten in 11.1.1.5. These URL does not work in 11 GR 2 PS1. I heard that they worked in 11 GR 2 PS2. I need to understand where they could have fixed this bug. Can anyone confirm? Can you tell me if there was a BP or a temporary patch where I can apply the patch for this version?

  Check the Doc ID 1548656.1 it says that the url should be as follows:

  http://oim_hostname:oim_port / identity/faces/forgotpassword

• I need to install a full standalone version for a system on the internet.

  I have a requirement to install FireFox on the internet connected non-systemes. I SCCM 2012 and want to use it. However, for the test, a complete stand-alone single version is good at the moment. Not necessary for working with SCCM. But must be fully usable for a system logged off the internet. Windows x 64 (specifically the Server 2008 R2). doesn't not have to be 64-bit, 32 will work as well.

  Offline installers are here:
  https://www.Mozilla.org/en-us/Firefox/all/

• Can I have a unique password and ID authentication for accounts and FireFox Sync?

  I can't keep my ID and password held for accounts of Firefox, Firefox Sync and Mozilla. Some how I have used two different e-mail accounts, and they have different passwords.
  I use a MacBook with OS X 10.1.1 and FireFox 34.0

  Sync and Firefox accounts use the same e-mail (user name) and the same password. There is a service - Sync uses Firefox web logins.

  The extent of the "Mozilla", do you mean this forum?
  You can use the same e-mail address and the same password, but different Mozilla Web sites and services use separate record and data connection; none are connected with other sites.

• HELP the real trouble, suppression of icloud for new account.

  Hi all.

  Had a MENTAL time trying too resolve this issue.

  Basically, I have my iPhone constantly asking me the password of my icloud under my old e-mail account, I can't log on, can't remove it because find my IPhone is on, I can't access this email address and I am so insistent on its amazing.

  I have read the discussions relating to this question many times here more and rude people side, the same old tired thing guard thinks so please read all this explanation before telling me the same old enough, thank you.

  IPhone5 - changed AppleId e-mail that my former email linked to a very bad access provider I didn't leave, no problem with the help of new Apple to buy apps or anything else ID, but ICloud keeps popping up asking for the password to the old e-mail address.

  I tried, oh so many times with the old password I also tried my current password after reading here about the glitch that allows a combination of the old password of e-mail/current connect; None of these work, at all.

  I can't connect to my old emails, however I tried anyway, I opened a session in manage my apple ID and tried to change to old email address - once again, repeated on all of these discussions, and, as other people have said it does not audit once again, I bloody well know my own accounts old and new, and all the passwords I've ever used, but if my old email that I haven't used in more 18 months does not connect with the security password or the password I had for her and won't accept my postcode in the forgotten password settings how the * can I connect to my old email to retrieve a code audit to configure this email as apple so id I can connect to the former iCloud on the phone, turn off find my iPhone, delete the account, go back to manage my apple ID and change the primary e-mail address in the current?

  Now, I just bought the 6s, but the problem remains.

  What I get now is constant pop-up windows asking me to connect on the old iCloud account, when I try, repeatedly with the old and new passwords, it now appears that my account has been locked and I need to check my apple ID, well, then it flashes up to this [email protected]- the old email I can not connect to , I want to delete, isn't an Apple ID - DURGH valid is because I changed it successfully to electronic current-(sûrement l'ordinateur est assez intelligent pour que si cet e-mail n'est pas un ID valide il devrait cesser surgissent et me demandant de vous connecter en utilisant elle?!)

  So I have my guest at 'search' as ID apple using my name and email - so obviously, I'm looking for with the details current, valid and he finds me and just told me to wait 8 hours;  then 2 seconds later a different pop up asking me to connect with the old e-mail address.

  So in summary he asks me the password from an old account that they don't even have on their system as an Apple ID valid, so I could get into any old rubbish and it will never, never connect BECAUSE IT DOESN'T EXIST ANYMORE.

  I want the old icloud account, the phone is off, then I can simply login with the new email that works perfectly.

  If you have the original receipt and a photo ID, try to take it to an Apple Store or dealer to see if they can help you. You can try to contact support Apple ID to see if they can straighten out the old problem of the e-e-mail and password.

  There is a contact link.

  Apple ID support

  Apple ID support (2)