Oracle connection to MPE/IX using MINISOFT

Similar Questions

• not able to connect to the database using the oracle instant client

  Hello
  
  I am not able to connect to the database using the instant oracle from my local PC client. They use to connect to the database files and sqlnet.ora files LDAP.ora. If I want to test the connection, I found this executable tns wasn't there, so not able to tnsping. So I'm not able to solve this problem.
  
  Please let me know if a solution for everything
  
  Client Oracle: oracle 10.2bFAT client 32-bit
  
  Platform: windows 7 64-bit
  
  Thank you
  Veera

  There is little that tnsping can do sqlplus can't.

  Instead of
  tnsping mydb.myorg.com
  Try
  sqlplus-s-L /@mydb.myorg.com
  or
  sqlplus-s-L user/[email protected]

  If you get
  ORA-12154: TNS: could not resolve the connect identifier specified
  you know that the customer could not resolve 'mydb.myorg.com '.

  If you get
  ORA-12541: TNS:no listener
  then "mydb.myorg.com" could be resolved, but there is no listener it running.

  If you get
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  then "mydb.myorg.com" could be solved, the listener is in place, and the database is out of service.

  If you get
  ORA-01017: name of user and password invalid. connection refused
  you know that 'mydb.myorg.com' has been successfully resolved, and the database is running.

  If you want more details, such as how and what "mydb.myorg.com" is resolved, turn the tracking by adding the following to "sqlnet.ora:
  TRACE_LEVEL_CLIENT = ADMIN
  TRACE_DIRECTORY_CLIENT = C:\TEMP (a writable directory)

  Then you will find lines like this in the trace file:

  -THE INFORMATION SOURCE PARAMETER FOLLOWS-
  Attempt to load system pfile source C:\oracle\network\admin\sqlnet.ora
  Source of the setting successfully loaded

  Attempt to load the local pfile source C:\Dokumente und Einstellungen\lanadvall\sqlnet.ora
  The parameter source has not been loaded.

  This shows you which configuration files are read, followed by the settings real read.

  nnfgrne: will read if path adapters
  nnfgrne: switching adapter LDAP

  He's now looking for LDAP name resolution.

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVSSL = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  These are LDAP servers, he is trying.

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  nnfgrne: query fails, the leap to the next map

  Did not work. Try the other adapters:

  nnfgrne: switching adapter EZCONNECT

  snlinGetAddrInfo: name resolution failed for test64.test

  No luck.

  If the resolution is approved, it will look like this:

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVERS = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  niotns: the call to address: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dbserver.host.myorg.com) (PORT = 1521)) (CONNECT_DATA = (SID = DBNAME) (CID = (PROGRAM = C:\Oracle\ora1020\bin\sqlplus.exe)(HOST=pc247596)(USER=lanadvall)))

  Yours,
  Laurenz Albe

• Not able to connect to the database using OS othenticated user.

  Hi team,
  
  We use HP UX servers, recently we pass the passive node to active (cluster OS) after that we are not able to connect to the database using OS authenticated the user, but I am able to conenct by user oracle sunig... !
  
  Please suggest me.
  
  Thank you
  Maurel.

  Please copy - paste the screen indicating the connection attempt with the authentication of the BONE and the error message.

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• A little sleepy Internet - cannot connect to Skype by using my Microsoft account

  Hello

  Since this morning, when trying to connect to Skype by using my Microsoft account, I got a message that the Internet is a little sleepy and I have to try again later. It's using the desktop on Windows 8.1 version. However, I can use my Skype ID and I am able to use the account of MS on Skype on Android. I could also open a session using the Win 8 application using my account, Ms.

  I tried the option to completely uninstall Skype (including enforcement Win 8) as suggested elsewhere on the forums of discussion, but the problem persists.

  It's incredibly frustrating!

  Please give me an alternative or tips on how to get rid of this problem.

  Thank you

  I discovered the problem. For one reason or another in my LAN in Internet Explorer settings, I had ' configuration script automatically use "checked with a value for the script. Have no idea how it got there, but he stopped at IE to connect to the internet, but also this problem with Skype. I almost never use IE, I tend to use Firefox or Chrome.

  A little worrying that it unknowingly.

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• Satellite L300D: Unable to connect to a network using WIFI

  I can't connect to a network using WIFI on my new laptop (which seems to be fairly widespread)
  When I followed the advice of the Knowledge Base, he said I should see an unknown device icon when I click on the other peripheral icon instead there is an icon of Ethernet controller with a yellow label on it

  Any help would be accepted with gratitude,

  Kind regards
  David

  Hello!

  What section of the Knowledge Base do you mean?

  However, try to update the driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Sometimes, I read in the forum that a BIOS solve the problem too.

  Additionally, make sure that the wireless is turned on with the power button on the computer laptop and FN + F8.

  Good bye

• Equium L300 unable to connect to my router using wireless

  I have a laptop Equium L300 and can't connect to my router using the wireless option.

  I am told that the wireless feature is disabled on my pc but the switch on the front is activated.

  Can connect with the cable is the wireless.

  Anyone know what this could be?

  Try pressing Fn + F8, only the activated Wifi become?

  In Device Manager, the wireless device is reported to work ok?

  Try a BIOS update as well.

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• Sony STRDN1030 receiver, connected to the TV using the video components. But no Menu appearing

  Just got the new Sony STRDN 1030 and hung to the audio and video. Connected TV using component, because it is an option only with my Panasonic Plasma. But I am unable to get any video same menu to display on the TV. Help, please.

  Hi asingh98,

  You can display the GUI (Graphical User Interface) or to A menu screen / audio receiver on the TV not screen with an HDMI connection. Cannot display the GUI Menu if the receiver is connected to the TV using component cables.

  However, if there is no video signal at all from the receiver to the TV, then there may be a problem with the resolution of video output selected in the receiver. Select the appropriate video resolution and check if that helps.

  Ensure that you have selected the correct entry in the TV and the receiver.

  Connect devices to the receiver and check if the same problem occurs with other video cameras too.

  If the problem is not resolved, try using a different cable to connect the receiver to the TV. You can see the Sony connection guide for the instructions to set up the appropriate cable connection.

  http://eSupport.Sony.com/us/p/tutorial-display.pl?tut_id=438&MDL=STRDN1030

  If my post answered your question, please mark it as an "accepted Solution".

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D