Oracle DB - passwords Impossible 12 c

Similar Questions

• Owner of software Oracle (installation): password

  Ive installed 10GEX and worked a little inside. Now, I work in the implementation of backup process. I want to set up a crotab to run the same script which is used through the GUI (Centos 5.4 - "RedHat"). I run the script manually with success.
  
  Read on crontab, each user can have its own set of jobs. and by using the crontab-l command you can list the work in the queue of the user you are logged in as. The 'oracle' user exists, but I do not have a password for it... in order to log in to the operating system by using this user and set up a cron job under his name.
  
  What is the right way to go? backup using the oracle user tasks? Can I know the oracle user - this would allow successful for the oracle user, crontab entry, or how to determine what is the password.
  
  I could always change the oracle as a 'root' user password - but that would break something?
  
  Thanks in advance for some background information (for you) and really need information for me.
  
  Rich

  Hello

  (1) If you set the oracle user password, it do not affect DB or Apex.

  (2) if I understand correctly, default password is not set for the oracle user, so you can't use it to connect.
  If you set the password using the passwd command, then you can log in with this username.
  Some Linux forum can give the best answer to this question.

  BR, Jari

• Oracle user passwords

  Hello
  
  Is anyway to see the current passwords for all users in oracle, including the SYS, SYSTEM, SW_POOL etc after logging in as an administrator?
  
  
  Thanks in advance,
  Pascale

  Pascale says:
  Hello

  Is anyway to see the current passwords for all users in oracle, including the SYS, SYSTEM, SW_POOL etc after logging in as an administrator?

  Thanks in advance,
  Pascale

  No, you can see that the hash value of home users

  Select the username, password from dba_users;

  but, you can see which are users with sysdba privilege sysoper using the view

  v$ pwfile_users;

• lost password impossible to activate the phone after resetting

  in fact, my concern is, my sister-in-law gave his iPhone 4S without deleting its icloud account, when I reset the phone I can't activate it asks password of the icloud account who forget my sister-in-law and she does everything to remember the password, but unfortunately it was unsuccessful the icloud account is * and IMEI or serial number of the phone is * the unit is shipped from the United States , of the State of Alaska, is there to turn it on, can you help me to activate by removing the account or you can help me to reset the phone, what do I do? I want to use the phone, thank you very much

  There is no way to activate the phone without the AppleID and password and Apple will not bypass it. Your sister should contact technical support Apple ID in order to get the password reset. We can not help you on this forum, because we do not work for Apple.

  Contact technical support here:

  http://www.Apple.com/support/appleid/

  Click contact Support on the left.

• Problem to install Oracle 11 g - impossible to establish a remote connection

  In short:

  I just installed Oracle 11 g and created a data base and the headset, but I'm unable to connect remotely with a customer database.

  My environment:

  Oracle 11g is installed on a VirtualBox (4.3.18) Red Hat Linux 6.5 VM.  The host operating system is Mac OS X Yosemite.  Linux VM is assigned a static ip address and the host and vm have host entries to resolve this name server:

  192.168.58.152 rhel65opdev-vm

  I am able to ping rhel65opdev-vm from these two places.

  Host: 64 bytes from 192.168.58.152: icmp_seq = 0 ttl = 64 time = 0,287 ms

  VM: 64 bytes of rhel65opdev-vm (192.168.58.152): icmp_seq = 1 ttl = 64 time = 0.027 ms

  I am also able to ssh into the Linux vm without problem.  If I try to telnet to the virtual machine on the port of configured database:

  = > telnet rhel65opdev-vm 1521
  192.168.58.152 by train...
  Telnet: connect to address 192.168.58.152: connection refused

  Telnet: unable to connect to the remote host

  Login as a user other my oracle on the same VM user, can I tnsping data base successfully:

  tnsping $ OP

  AMT Ping utility for Linux: Version 11.2.0.4.0 - Production on 16 January 2015 13:47:10

  Copyright (c) 1997, 2013, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = rhel65opdev-vm)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = OP)))

  OK (10 ms)

  The same user non-oracle, I am able to do appear SQLDeveloper and establish a connection with the database and check its schema.  But on the Mac, I am unable to use (the Mac version of) SQLDeveloper to do the same.  I get an error: IO error: the network adapter could not establish the connection.  Code 17002 provider.

  I have another Red Hat 6.5 virtual VM from where I'm modeling this new machine, which has the same version of Oracle on it, installed and working (which I myself installed without problem, but a long time ago).  I am able to connect remotely to this base since my Mac using Toad and SQLDeveloper without problem and I can telnet to port of database and there is no problem.

  I point out that I recently removed from the database and reinstalled.  I have created only one service: OP, but the OPXDB see below seems to be a previous installation, which can contribute to my question - not sure.

  Here are a few releases of various orders, I tried following suggestions I've seen on different threads, I found through research:

  • lsnrctl service $

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 16 January 2015 13:59:32

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  Summary of services...
  "OP" service has 1 instance (s).
  Instance "OP" READY State, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service 'OPXDB' has 1 instance (s).
  Instance "OP" READY State, has 1 operation for this service...
  Managers:
  "D000" put in place: 0 denied: current: 0 0 max: 1022 State: loan
  DISPATCHER < machine: rhel65opdev-vm, pid: 2116 >
  (ADDRESS = (PROTOCOL = tcp) (HOST = rhel65opdev-vm)(PORT=23707))

  The command completed successfully

  • $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 16 January 2015 14:00:49

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
  Start date 16 January 2015 13:19:05
  Uptime 0 days 0 h 41 min 44 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /opt/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
  The listener log file /opt/app/Oracle/diag/tnslsnr/rhel65opdev-VM/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = rhel65opdev-vm)(PORT=1521)))
  Summary of services...
  "OP" service has 1 instance (s).
  Instance "OP" READY State, has 1 operation for this service...
  Service 'OPXDB' has 1 instance (s).
  Instance "OP" READY State, has 1 operation for this service...

  The command completed successfully

  • $ iptables-L - v

  INPUT string (policy ACCEPT packets 0, 0 bytes)
  pkts bytes target prot opt in to the source destination
  2146 229K ACCEPT all - none none no matter where, no matter where the State RELATED, established
  2 168 ACCEPT icmp - any any anywhere anywhere
  576 34560 ACCEPT all - lo any anywhere anywhere
  7 448 tcp - all all no matter where no matter where State ACCEPTING NEW tcp dpt: ssh
  all 21 3688 - REJECT any any anywhere anywhere reject-with icmp-host-prohibited
  
  Chain forward (policy ACCEPT packets 0, 0 bytes)
  pkts bytes target prot opt in to the source destination
  0 0 all - REJECT any any anywhere anywhere with reject icmp-host-prohibited
  
  Chain OUTPUT (policy 2307 ACCEPT packets, 259 kb)

  pkts bytes target prot opt in to the source destination

  • $ cat /opt/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  tnsnames.ora # Network Configuration file: /opt/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  OP =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = rhel65opdev-vm)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = OP)
  )
  )

  • $ cat /opt/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    listener.ora # Network Configuration file: /opt/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    
    OP_LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = rhel65opdev-vm)(PORT = 1521))
    )
    )
    
    

  ADR_BASE_OP_LISTENER = Oracle

  • My ORACLE_HOME is set to /opt/app/oracle/product/11.2.0/dbhome_1
  • On the Linux VM on which Oracle runs correctly (host name rhelopvm), I have the log queue listener and start SQLDeveloper on the host Mac:

  $ tail-f /opt/oracle/11.2.0.4/diag/tnslsnr/rhelopvm/listener/alert/log.xml

  < time msg = "2015-01 - 16 T 14: 19:02.286 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr'"
  type = 'UNKNOWN' level = host_id = '16' "rhelopvm".
  host_addr = '192.168.57.152' >
  < txt > 16 January 2015 14:19:02 * (CONNECT_DATA = (SID = OP) (CID = (= SQL Developer PROGRAM) (HOST = __jdbc__) (USER = sellis))) * (ADDRESS = (PROTOCOL = tcp (PORT = 50158))(HOST=192.168.57.100)) * establish * OP * 0
  < / txt >

  < / msg >

  When I have the same tail on the defective VM log, the connection request is not that much (and so nothing is seen in this newspaper).

  In conclusion, I am of ideas on how to diagnose and correct the network error.  I would be grateful for any help.

  Thank you

  Scott Ellis

  This can prove to be worthless, consider that on some * nix systems 'iptables' is enabled as part of the base operating system installation.

  your symptoms may change if you turn off or disable iptables on the virtual machine

  IPTABLES (8) IPTABLES (8)

  NAME

  iptables - administration tool for IPv4 and NAT packet filtering

  LOGBOOK

  iptables [-t table]-[AD] chain rule-specification [options]

  iptables [-t table]-I chain [rulenum] rule-specification [options]

  iptables [-t table] r chain rulenum rule-specification [options]

  iptables [-t table] d chain rulenum [options]

  iptables [-t table]-[home] [string] [options]

  iptables [-t table] chain n

  iptables [-t table] X-[string]

  iptables [-t table] string Pei [options] target

  iptables [-t table] name old-chain-new-name-of-chain E

  DESCRIPTION

  Iptables is used to set up, maintain and control intellectual property tables

  Linux kernel packet filtering rules.  Several different tables can

  be defined.   Each table contains a number of built-in chains and may

  also contain user-defined strings.

  Each string is a list of rules that can match a set of packages.

• Oracle SYS password

  Hello
  
  Applications need to use one of these user accounts?
  Shouldn't the application have a configuration of the user on the database or server, and not use these.
  
  SYS
  SYSTEM
  ORACLE

  Hello

  SYS and SYSTEM are not thin application.

  Is ORACLE user/schema of your database application? It is not a standard administrative user.

  Best regards
  Jean Valentine

• Impossible to change the password of COMMENTS

  Hello
  
  I'm trying to change GUEST password by editing the context file (s_guest_pass) and then running the autoconfiguration service.
  If automatic configuration is done correctly the log file has errors such as
  
  Impossible to update GUEST_USER_PWD in the database for the COMMENTS/NEWPASS - unable to access the ORACLE application password
  
  Cause: Object Library Application could not access your ORACLE password.
  
  Action: Contact your technical support representative.
  Impossible to update GUEST_USER_PWD in the database for the COMMENTS/NEWPASS - cannot access password ORACLE application.
  
  (Note: the above messages are generated when the autoconfig call adgendbc)
  
  Also both the sql ' select fnd_web_sec.validate_login ('GUEST', 'NEWPASS') from dual;
  
  "select fnd_web_sec.validate_login ('GUEST', 'ORACLE') from dual;
  
  returns N.
  
  Which means that the password of COMMENTS is not changed.
  
  I checked the dbc file and profile GUEST_USER_PWD option, two of them have the new password.
  
  If I go back the password (i.e. reset s_guest_pass to ORACLE), autoconfig succeeds with no message and the SQL ' select fnd_web_sec.validate_login ('GUEST', 'ORACLE') from dual; "returns"Y ".
  
  Can you please advice if Miss me something?
  
  Appreciate your help
  
  Thank you
  Nikhil

  Hello

  What is the version of the application?

  If you have followed the steps as stated (how to successfully Change The Guest password in E-Business Suite 11.5.10 and R12 [443353.1 ID])? If so, please see if these documents help.

  Cannot change password user comments in the Oracle 11.5.10 Applications [ID 316277.1]
  After upgrade to Atg_rup6, we are not able to change the password of user comments [ID 553083.1]

  Thank you
  Hussein

• How to change the password of a schema by using Oracle SQL Developer

  Hi need to change the password of a schema by using Oracle SQL Developer, how can I do?

  or maybe http://www.thatjeffsmith.com/archive/2012/11/resetting-your-oracle-user-password-with-sql-developer/

• to change the password of oracle 11 g R2 RAC

  Hello
  I need to change the password or oracle. in a thread, it is already listed there be no effect to the environment of FCAC
  I agree to that, but I fear for ssh we need to reconfigure it or any what steps for ssh to manage the new oracle user password? Please guide me for the same thing.
  Thanks in advance

  Hello

  I agree to that, but I fear for ssh we need to reconfigure it or any what steps for ssh to manage the new oracle user password? Please guide me for the same thing.

  You can change your password of user oracle (sagna), no impact on ssh, SSH does not use the password of the user oracle (sagna).
  SHH information are based on hash keys and the password for SSH (own), not password of the Oracle user's operating system.

  If you have a ssh problem. Visit the link below.

  http://levipereira.WordPress.com/2010/12/07/configure-SSH-for-user-equivalence/

  Kind regards
  Levi Pereira
  Please close your message when you get the solution to your problem.
  
  Mark responses replied 'useful' response or 'correct' answer which will help others with the same problem.
  
  Thank you for doing your part to make this community as valuable as possible for everyone!
  

• need to change password for root and oracle Linux

  Dear all,
  
  We have installed Oracle RAC server configured a year back. now, due to security reason has to change the root and oracle user password.
  so before changing the password, we want to know is there any impact on live server due to change password for the user root and oracle RAC.
  
  as we so oracle user equivalence if we change the password, it will work very well.
  
  Thank you
  Shir khan

  SHERKHAN wrote:
  Dear all,

  We have installed Oracle RAC server configured a year back. now, due to security reason has to change the root and oracle user password.
  so before changing the password, we want to know is there any impact on live server due to change password for the user root and oracle RAC.

  as we so oracle user equivalence if we change the password, it will work very well.

  No, there is no impact of the change to the password of user oracle/root on the equivalence of the user and RAC.

  Also check similar posts in the past:

  User OS password Oracle RAC environment change

  Concerning
  Rajesh

  Published by: Rajesh on August 25, 2010 11:26

• Oracle password verification script

  Hi all
  
  I'm under the utlpwdmg.sql of script file verification of password Oracle SYS user to allow Oracle DB password checks. Such a check is the current password is different from the previous password at least 3 characters. However when I try this using sqlplus commands as below, I am unable to generate an error arising from this control.
  
  SQL > @utlpwdmg.sql
  
  The function is created.
  
  Modified profile.
  
  The function is created.
  
  SQL > alter user aparajit identified by abcd1234;
  
  Modified user.
  
  SQL > alter user aparajit identified by abcd1235;
  
  Modified user.
  
  Can someone tell me why the new password works although it is identical to the old password with the exception of a single character?
  
  Later, I logged in as a user with Aparajit
  Sqlplus Aparajit/abcd1234\ @ < DBname >
  
  And the password command used to change the password manually. Only when I did this it gives me the error: "ORA-20011: password should differ from the \".
  old password at least 3 characters"
  
  I guess that the error cannot be generated if you are logged in as superuser. Is this true?
  
  Thank you
  Aryan

  utlpwdmg. SQL is a very simple script.

  Please read to understand what it does.

• Setup error Oracle Service registry 11.1.1 with no release to clear the log

  I get the following error during the installation of the OSR, I am new to ORACLE can we all please let me know solution. The log file lists these vague lines. How can I troubleshoot it. I have Windows 7 and 12g of Oracle is installed. I created a schema user "OSR" as well. Can anyone help?

  ================================================================

  Java returned: 1
  Failed installation. If available, see 'C:\Oracle\Middleware\Weblogic\registry111\log\install.log '.
  For correct installation settings and the installation of curriculum vitae, click recovery.
  .
  #
  #Mon 22 dec 18:51:03 2014 PKT
  porting. Context = Registry
  DB. System.Name.condition = Oracle
  install. Server.Operator.Name = Oracle
  porting. WebLogic.deploy.Mark =
  Oracle.Server.Host = localhost
  install. Server.SMTP.port = 25
  alldb. Create.DataSource.Name=JDBC/registryDS
  porting. WebLogic.admin.Password = *.
  install. Server.SMTP.Password.confirmation = *.
  install. Server.admin.mail=admin@localhost
  install. OS.is.win.AndCondition = true
  Create.Desktop.Icons = no
  porting.support.multihost = true
  porting. WebLogic.Home =
  Setup.Skip.Marker =
  porting. WebLogic.deploy.type.condition = Domain
  install. Server.SMTP.default.sender.Name = NAB
  porting. WebLogic.admin.port = 7001
  install. Server.SMTP.Password = *.
  porting.HTTPS.use = no
  Account.backend.type.condition = Database
  install. Server.SMTP.title =
  alldb. Advance.condition = false
  install. Server.admin.Name = admin
  alldb. Create.DataSource.WebLogic = Yes
  install. Server.admin.Password.confirmation = *.
  Dist.version = 11.1.1
  install. [email protected]
  alldb. Create.DataSource = Yes
  install.type.condition = standalone
  alldb. JDBC. Custom.uribox = no
  install. Server.SMTP.Host = localhost
  Create.menu.Items = no
  alldb. Create.Drop.condition = Connect
  Oracle.Database.Name = ORCL
  porting. WebLogic.admin.Host = localhost
  porting. WebLogic.https.port = 7102
  install. Directory = C\:\\Oracle\\Middleware\\Weblogic\\registry111
  install. Server.admin.Password = *.
  Oracle.Server.port = 1521
  porting. WebLogic.http.port = 7101
  DB. ShowAll.condition = false
  porting. Server.type.condition = standalone
  alldb. JDBC. Custom.urifield =
  alldb. JDBC.drivers.Paths=C\:\\app\\nkhan\\product\\12.1.0\\dbhome_1\\jdbc\\lib\\ojdbc6.jar
  porting. HostName = Oracle - nkhan.xavor.com
  porting. WebLogic.admin.Name =
  porting. WebLogic.java.Home =
  porting.type.condition = weblogic11g
  install. Server.SMTP.Account.Name =
  Oracle.Database.User = OSR
  install. Windows.menu = Oracle 11.1.1 Service registry
  Oracle.Database.Password = *.

  [java] BUILD FAILED
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:785: The following error occurred during the execution of this line:
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:390: The following error occurred during the execution of this line:
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:207: The following error occurred during the execution of this line:
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\db\oracle\installOracleDB.XML:184: Java returned: 1

  [java] Total time: 3 seconds
  Java returned: 1
  Failed installation. If available, see 'C:\Oracle\Middleware\Weblogic\registry111\log\install.log '.
  For correct installation settings and the installation of curriculum vitae, click recovery.
  =============================================================================

  I had Oracle database 12 initially. I was not aware that Oracle Service registry currently supports 10g or 11g database. So, I uninstalled the 12 database and installed 11g. Then installed the Service registry and the fixed number.

• Gives the Script import FDM of oracle RDB to import - import has failed. Data not valid or empty content.

  Hi all

  I create an FDM interface to extract data from Oracle RDB and onto an essbase database. I feel that if you have to shoot the script import data of RDB, you must create an integration. So I created a script to import integration based on the example given in the FDM Document admin.

  The Script is as below:

  Function PSIP_TEST (lngCatKey, dblPerKey, strLoc, strWorkTableName)

  '------------------------------------------------------------------

  "Import oracle Hyperion FDM integration script:

  '

  ' Created By: admin

  "Creation date: 18/02/2014-18:00:33.

  '

  ' Object:

  '

  '------------------------------------------------------------------

  Dim cnSS ' ADODB. Connection

  Dim strSQL ' SQL string

  Dim rs ' Recordset

  Dim rsAppend ' tTB table add rs object

  'Initialize objects.

  Define the cnSS = CreateObject ("ADODB. Connection")

  Set rs = CreateObject ("ADODB. Recordset')

  Set rsAppend = DW. DataAccess.farsTableAppend (strWorkTableName)

  "To connect to the Oracle database

  CNSS. Open "Provider = OraOLEDB.Oracle.1; Password = PSIP_TST; Persist Security Info = True; User ID = PSIP_TST; Data Source = PSIP.

  ' Create the query string

  strSQL = "SELECT YEAR, COST_CENTRE, PROGRAMME_CODE, PROJECT_CODE, ACCOUNTS, AMOUNT FROM VW_PSIP_EBUDGET_ESTIMATES.

  «Get data»

  RS. Open strSQL, cnSS

  "Locate the data.

  If rs.bof and rs.eof then

  RES. PlngActionType = 2

  RES. PstrActionValue = "no records to load!

  Exit Function

  End If

  ' Loop through records and add table APCs to place DB

  If it is rs.bof and not rs.eof then

  While Not rs.eof

  rsAppend.AddNew

  rsAppend.Fields ("PartitionKey") = RES. PlngLocKey

  rsAppend.Fields ("CatKey") = RES. PlngCatKey

  rsAppend.Fields ("PeriodKey") = RES. PdtePerKey

  rsAppend.Fields ("DataView") = "CDA".

  rsAppend.Fields ("CalcAcctType") = 9

  rsAppend.Fields ("Account") = rs.fields ("ACCOUNTS"). Value

  rsAppend.Fields ("Entity") = rs.fields ("COST_CENTRE"). Value

  rsAppend.Fields ("UD1") = rs.fields ("COST_CENTRE"). Value

  rsAppend.Fields ("node2") = rs.fields ("PROGRAMME_CODE"). Value

  rsAppend.Fields ("UD3") = rs.fields ("PROJECT_CODE"). Value

  rsAppend.Fields ("Amount") = rs.fields ("Amount"). Value

  rsAppend.Update

  RS. MoveNext

  Loop

  End If

  "Loaded files

  RES. PlngActionType = 6

  RES. PstrActionValue = "import successfully!

  'Assign the return value.

  SQLIntegration = True

  End Function

  When I run the Script in the Script Editor, I get the following error:

  Error: An error occurred while running the script:

  -2147467259-data access error.

  Online: 19

  If I see in the error log, it is as follows:

  ERROR:

  Code... - 2147467259

  Description... ORA-00903: invalid table name

  Process... clsDataAccess.farsTableAppend

  The component... upsWDataWindowDM

  Version.......................................... 1112

  Thread........................................... 41900

  Nude of the line. 19 is as follows: Set rsAppend = DW. DataAccess.farsTableAppend (strWorkTableName) and, therefore, I thought that perhaps this is when I run the script in the Script Editor, perhaps that the value of the variable "strWorkTableName" does not get filled it is why it gives an error.

  So I ran the import stage in the Workflow, and Got the following error:

  Error: Failed to import. Data not valid or empty content.

  and there is no entry in the error log.

  I'm lost, need your help please.

  One last thing, I would like to ask is kindly please post if my connection string is correct, either:

  CNSS. Open "Provider = OraOLEDB.Oracle.1; Password = PSIP_TST; Persist Security Info = True; User ID = PSIP_TST; Data Source = PSIP.

  I read that FDM is a 32-bit product and will require a connection 32-bit oledb provider.

  FDM here is installed on a 64-bit computer and the provider that is used here in the connection string is 64-bit.

  
  

  Please help, my work here came to a fixed support. Kindly help
  

  That would mean that your 32-bit TNSNAMES. ORA file does not have a good connect descriptor for what you provide in the UDL file.

  Check your TNSNAMES 32bits. ORA file and make sure you have a good connect descriptor for the Oracle database.

• pass the query to oracle

  Hi all

  How can I send a query to oracle using cfstoredprod?

  Try this:

  < datasource = "" #application.dsn # cfstoredproc "procedure =" #importTable #">"

  < cfprocparam type = 'in' cfsqltype = "cf_sql_refcursor" value = "#myQuery #" >

  < / cfstoredproc >

  The Oracle code:

  Procedure importTable (v_table IN SYS_REFCURSOR) is

  Error: [Oracle JDBC Driver] impossible to determine the type of the specified object.

  Any ideas?

  Thanks in advance.

  Get your drives and put them in a query object (if they aren't already), let's call it getRecs, and:

  
  INSERT ALL
     
        INTO schema.tableName(columnA, columnB, columnC, etc)
        VALUES (,,,)
     
     SELECT * FROM DUAL
  
  

  You must include the "SELECT * FROM DUAL" after the loop to exit.  Connect it to your database (Oracle), insert all the lines and disconnect.  Place it in a CFTRANSACTION tag to make sure that they are all inserted or all cancelled.

  HTH,

  ^_^

• Configure the new Oracle with HFM SSP database

  Hello
  
  We have upgraded the oracle database to new version 11g. We use HFM 11.1.1.3 version. When I tried to configure the new database oracle with existing shared Services HFM, the EPM Configurator is suspended. Please could you clarify the below a few questions before starting the configuration of the database.
  
  1. don't we want to modify properties or configuration files before starting the EMP Configurator?
  
  2. If we want to edit the file reg.properties, which is the password shows in the file reg.properties (here is the structure of the reg.properties file)? If I have to give password of Oracle database schema?
  
  JDBC. URL = jdbc\:hyperion\:oracle\: / / xxxxx;
  password =?
  JDBC. Driver = Hyperion.JDBC.Oracle.OracleDriver
  local. Value = #.
  username = schemaname
  
  Thank you
  Michel K

  Is it a new database server that you want to configure? As if he was just updated, you should not need to do anything.
  If this is a new database server, then have a read of the doc within Oracle Support - "How To Change Shared Services repository database in EMP 11 [ID 976279.1]".

  See you soon

  John
  http://John-Goodwin.blogspot.com/