Oracle Linux installation problem

Similar Questions

• I-Learning self-study Oracle Linux installation

  Hi all;
  
  I prepare a documentation on the Installation of i-learning step by step Oracle Linux.
  
  Its available at:
  
  http://heliosguneserol.WordPress.com/2010/05/25/step-by-step-Oracle-i-learning-installation-on-Linux/
  
  It may be useful to the users of the forum
  
  Respect of
  HELIOS

  Helios,

  Thanks for sharing this with us!

  Thank you
  Hussein

• Oracle 9i installation problem of the Red Hat Linux 3.2.3 - 20

  Hello
  
  With the Oracle user, I try to install Oracle 9i.
  
  ERROR:
  
  Target error reissue of makefile /opt/oracle/OraHome1/precomp/lib/ins_precomp.mk
  
  Installation stuck at 62%
  
  All the ideas!

  You run 32-bit linux.
  uname-m will show architecture, 64-bit, there will be x86_64.
  You can run
  [oracle @... lib] file $ / usr/bin/leader
  / usr/bin/file: ELF 32-bit LSB executable - this will show as well it is 32-bit or 64-bit.

  Published by: Laura Gaigala February 3, 2009 14:19

• Satellite L650 - 10 M - Fendora Linux installation problem

  Hello

  I have an urgent problem.
  I tried to install F8, F9, F10, F11 and F13 direct but all gave the same problem which is I can't install the operating system.

  the problem is that Fedora can not communicate with ATI Radeon HD 5145... the installer crashes just straight up
  sometimes crashes when it tries to run anaconda...

  Now F10 X86_64 was installed normally, but after the first reboot... he become crazy... and started posting garbage... going to init 1 and you try to run the GUI I have X Server error.

  also the ubuntu worked too much

  My laptop is
  Toshiba Satellite L650 - 10 M
  Processor Intel CoreTM i3 - 330 M (2.13 GHz, FSB:1066 MHz, 3 MB level 2 Cache)
  2 048 MB of memory DDr3 (1066 MHz) of system RAM memory
  320 GB disk sata hard
  Mobility of the ATI Radeon HD 5145, dedicated 512 MB up to 2 810 MB Graphics
  Wireless 802.11 a/B/G built-in Wi-FiTM; Bluetooth

  Help please

  Have you tried to visit a few Linux forums and the search for solutions?
  As you know Toshiba doesn't support Linux on the laptop model, and you'll be really lucky if someone has the same model of laptop and the same problems of Linux.

  On Linux forums, you can chat with others about installing Linux on different laptops, but with a similar hardware configuration.

• OraDB 11g 2 on Oracle Linux installation

  Can someone help me with the installation of Oracle Database 11 g in Oracle's Linux!

  The Oracle supported only on Linux 6.x database currently is 11.2.0.3, which can be downloaded from https://support.oracle.com - see my post above

  Srini

• document db Oracle Linux installation

  Salvation is a clear documentation of OBIEE put in place under linux, from the outset we hear oracle under LINUX, informatica, and DAC database configuration.

  Hello

  I installed OBIEE on linux...  You can check out my blog

  How to install OBIEE 11.1.1.1.6 on Linux OEL5 update 8 - part-6

  Thank you

  Vincent

  OBIEEDeveloper

• Oracle 10G installation problem: DISPLAY PRAMETER

  Hello
  
  I created a solaris VM using VMWARE. While trying to install oracle 10g of loging directly in the virtual machine, I get the following error.
  couldnot execute auto check for display colors using command/usr/openwin/bin/xdpyinfo(1). Check if the display variable is set
  
  I use VNC or humming bird? Is it not possible to install directly using solaris CDE
  
  
  I tried by the display setting, but the same error is thrown
  
  Please let me know any work around for this problem.

  I bet that...

  you connected to the desktop as root, open a terminal, su was at oracle and started the runInstaller.

  In which case the office belongs to root and disadvantaged poor oracle is not a desktop computer can be written. The solution is not to connect to the desktop as root. Indeed, in the real world most DBA trying to do this will get their fingers slapped.

• Oracle 10g on Oracle linux 6.2

  HELO
  
  I'm planing to install Oracle 10.2.0.1 on an Oracle Linux 6.2 64 bit hosted on VMWare workstation.
  
  I found places that describe Oracle linux installation process, but most of them are for linux Redhat 5 or company 5. The main resource I found for Oracle Linux 6 is here:
  
  http://www.Oracle-base.com/articles/Linux/OracleLinux6Installation.php
  
  But it's not specify Oracle database product package dependencies. The package dependencies are listed [and here | http://docs.oracle.com/cd/B28359_01/install.111/b32002/pre_install.htm#CIHFICFD], but even for linux Redhat 5 and the company 5.
  
  Is there an official documentation explaining the process of PRECAUTIONS, including dependencies, for version 6.2 of Oracle Linux?
  
  Thanks in advance!

  Salvation;

  1 there is no any oracle product approved for * version 6.x unix
  2. you must use * version 5.x unix

  See:

  Oracle database on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1]

  Respect of
  HELIOS

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• The Oracle Linux 5.10 ADR 11.1.1.6.0 installation problem

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to create the web page application online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  I just finished installing Oracle ADR (Application Development Runtime) 11.1.1.6.0 with Weblogic 10.3.6.0 in Oracle Linux 5.10 Server machine. In step 3 of 8 required checks, impossible to pass the 2 items below:

  (1) verification of recommended operating system Packages (no pass)

  (2) verification of the parameters of the kernel (no pass)

  Oracle Linux 5 is certified with ADR and prerequisite verification certificate of operating system is spent, so, I keep the installation to the end successfully.

  My question is:

  2 items not moved will not affect the development of applications or performance later? If so, how to fix?

  Thanks in advance.

  (1) the parameters are necessary, but the system is running with a lower number. Right in the middle of the execution of your application, enter you the maximum and your system stops. It is best to set the values for the given numbers. When you run the Setup program and go to the test page and the test fails, you should be able to click the test below and the installation should continue. If the continue button is not active, you must correct the error.

  (2) I don't have an oel5 system. Missed, you have not all if necessary values in your limits.conf file? The syntax for the Scriptures is essential. Look at the other lives in the files. How do they look like?

  I guess you need to add a space after the * who would set the setting for all users, or set you it only for user oracle, which is the one you normally install the software with. Check out the tutorial I posted the link with my last post. You may need to add the line /etc/pam.d/login and etc/pam.d/sshd.

  Timo

• Conflict Version Java problem on ADR 3 Linux installation.

  Hello

  
  

  I installed 3 ADR in vmware in Oracle Linux 6.5 64-bit. It works fine, no problem. Now in my production server, I try to install 3 ADR in Oracle Linux 6.2 64bits. Oracle HTTP Server 11 (web tier) is also installed in the same server. I can't wait to move from ESO of Glassfish/ADR REST Full web services Apex 4.2.6 support. Now I have also installed Glassfish Server 3.1.2.2 successfully.
  

  
  

  When I run the command

  
  

  Java $-ords.war advanced pot installation

  Suite error indicates:

  Java $ [oracle@myserver ords3] - installation of ords.war advanced pot

  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle, dbtools, jarcl, Entrypoint: version unsupported major.minor 51.0

  at java.lang.ClassLoader.defineClass1 (Native Method)

  at java.lang.ClassLoader.defineClass(ClassLoader.java:634)

  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142)

  at java.net.URLClassLoader.defineClass(URLClassLoader.java:277)

  to java.net.URLClassLoader.access$ 000 (URLClassLoader.java:73)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:212)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:205)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:321)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:294)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:266)

  The main class is not found: oracle.dbtools.jarcl.Entrypoint. Program ends.

  I suspect it's the Java version number so I checked the version

  Java-version

  Java version "1.6.0_22".

  OpenJDK (IcedTea6 1.10.4) runtime environment (rhel - 1.41.1.10.4.el6 - x86_64)

  OpenJDK 64-bit Server VM (build 20, 0 - b11, mixed mode)

  Then I installed the jdk 1.7... and control changes in fact file installation in bash_profile as follows:

  JAVA_HOME=/usr/java/JDK1.7.0_79; Export JAVA_HOME

  Path=$path:$JAVA_HOME/bin:/usr/java/JDK1.7.0_79/JRE/bin; export PATH

  but the version of java is always 1.6.0.22. Now, since ORDS3 requires jdk 1.7... I think the problem is with the version of java. But I can't do the update java as the default jdk. How can I do it. Help, please

  
  

  Thank you

  Hasan Al Mamun
  

  Problem is resolved a little, or it was done one way or another.

  I created another server in vmware with OL6.0 64 bit. Java version is jdk1.6...

  Now, I have

  1 tar - vxzf jdk-7u79-linux - x 64 .tar .gz

  created by /usr/jdk1.7.0_79

  in the bash profile

  export JAVA_HOME=/usr/jdk1.7.0_79

  PATH="$path":/usr/JDK1.7.0_79/bin; export PATH

  2. now installed server Glassfish 3.1.2.2. then it took the JAVA_HOME for Installation.

  3. now, I issued the command

  ords.war advanced pot /usr/JDK1.7.0_79/bin/Java-installation

  Done with success.

  4. now, I could deploy deployment ords.war and i.war in Glassfish Server

  It works fine now.

  If the key was to install JDK 7 and set JAVA_HOME to java to update location prior to the Installation of Glasfish.

  Thank you

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• Oracle 11g R2 on Oracle Linux 7 loading problems

  It drives me crazy!  I use VMPlayer (6.0.4 build-2249910) to load the Oracle 7 and have no problems at all.  However, when I install Oracle 11 g R2, that's when I encounter problems (just loading software; not to create a database at the moment).  First of all, let me tell you, I'm not some process that I found on the internet several times.  There are slight differences in some of them, but essentially, I used the website below to install Oracle 11 g 2 on Oracle Linux 7:

  ORACLE-BASE - Oracle Database 11g Release 2 (11.2) Installation on Linux Oracle 7 (OL7)

  When running through the installation, I first encountered the ctx error:

  

  I could find anything on this subject, so I continued in this way.  To learn more about this later...

  The next error I get is:

  

  This second error was easy to be supported by the following:

  During the connection phase, you will encounter an error invoking the file 'ins_emagent.mk '. To resolve this problem, change the "$ORACLE_HOME/sysman/lib/ins_emagent.mk", do a search and replace the line below.

  FROM:
  $(MK_EMAGENT_NMECTL)
  TO  :
  $(MK_EMAGENT_NMECTL) -lnnz11
  

  Click 'Retry '.

  Now took care of the issue emagent.

  On the issue of CTX, I can't find anything on this at all!  I looked in the log file and found the following detail:

  INFO: mv /u01/app/oracle/product/11.2.0/bin/ctxlc /u01/app/oracle/product/11.2.0/bin/ctxlcO f

  INFO: mv ctxlc /u01/app/oracle/product/11.2.0/bin/ctxlc

  INFO: chmod 751 /u01/app/oracle/product/11.2.0/bin/ctxlc

  INFO: gcc o ctxhx-m64-L/u01/app/oracle/product/11.2.0/ctx/lib/-L/u01/app/oracle/product/11.2.0/lib/-L/u01/app/oracle/product/11.2.0/lib/stubs/ /u01/app/oracle/product/11.2.0/ctx/lib/ctxhx.o-L/u01/app/oracle/product/11.2.0/ctx/lib/ - lm-lsc_fa-lsc_ex-lsc_da-lsc_ca - lz - lctxhx-Wl,-rpath,/u01/app/oracle/product/11.2.0/ctx/lib-lsnls11-lnls11-lcore11-lsnls11-lnls11-lcore11-lsnls11-lnls11-lxml11-lcore11-lunls11-lsnls11-lnls11-lcore11-lnls11 ' cat / u01/app/oracle/product/11.2.0/lib/sysliblist

  INFO: '

  INFO: /lib64/libstdc++.so.5: refers to 'memcpy@GLIBC_2.14' the undefined

  collect2: error: ld returned 1 exit status

  NEWS: make: * [ctxhx] error 1

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in invoking target 'install' of makefile ' / u01/app/oracle/product/11.2.0/ctx/lib/ins_ctx.mk'. See ' / u01/app/oraInventory/logs/installActions2014-11-28_12-45-46PM.log' for details.

  The exception severity: 1

  It seems to be hung on the reference to "memcpy@GLIBC_2.14".  I found a few web references on this, but I don't think that they apply given that sites speak other Linux distributions.

  What bothers me the most about it is that I use everything which is Oracle (except VMPlayer), but I get errors that I don't think that should be the case because there is nothing else than the Oracle!

  Is there something I can add to the command 'gcc' or the make file that will get this work?

  BTW: I think that I will not use CTX with my DB, then will I get in trouble if I create a database with this error CTX?

  Thanks in advance!

  It drives me crazy!

  That's because GR 11, 2 is not certified or supported on Linux 7 (no matter what claim of third-party sites or blog-see the subheading of the blog). Only 12cR2 is http://docs.oracle.com/database/121/LADBN/toc.htm#LADBN101

  So, you can either 12cR2 (1) installation on Linux 7 by following the steps of the official installation guide or (2) downgrade your operating system Linux 5 or 6 of Linux to install 11 GR 2 (Linux 6 requires 11.2.0.3 or higher - http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm#CHDFHIEA)

• Installation of Oracle RAC with Oracle Linux 5.8(64bit) and 11 GR 2 on EXSI 5.5

  Well, I'm trying to install oralce RAC on oracle Linux 5.8(64bit) with 11 GR 2.

  After installation oracle Linux package required by it I m is problem for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm.

  I triyed with rpm - Uvh oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and the result is rpmlib (FileDigests) and (PayloadisXz) rpmlib need for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm

  I triyed with yum localinstall oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and get an error of public key for 2.0.4 - oracleasmlib - 1.el6.x86_64.rpm is not installed...

  I tried on 3 machines and same result.

  With 32-bit I m not getting any problem

  Found the solution

  the inadequacy of the kernel version and oracle asm

• R12 Quick Installation on Suse Linux or Oracle Linux fails

  Hello

  I tried several combinations of operating systems to try and install correctly using the Oracle R12 / quick installation but I could not. My last attempt was on Suse Linux 10. When the installation wizard is complete, database checks are successful but HTTP server is unresponsive and all subsequent checks fail.

  The reading of google and the various threads on this forum, I found that for Oracle Linux, we must apply the patch that contains libdb.so.2. Since then, I do not have an account to support oracle, I cannot get this fix and based on rules, no body can send it in an email, which means that we can not install this distribution on Oracle Linux without having to pay for the supported. Since then, it is a learning exercise without the use of serious production of R12 apps, we do not have any arrangement with Oracle support.

  For Suse, I also have the same problem, but when I try to start the opmn manually using opmnctl beginning, she responds with message, began. But when I use opmn stopall, the computer stops responding. Now, I don't know yet how to start debugging this problem.

  I would give just to try to install it or there at - it a hope?

  Thank you.

  Hello

  I finally managed to install R12 on Suse Linux Enterprise 10 SP3. I decided to start again after a repair for the past two days. Here's the process:

  a. install Suse Enterprise 10 SP3 with office and all development packages offered in the facility.

  b. click the computer--> install the software--> search for the 'db1 '. It will give you two or more packages. Install db1_185xx (from Berkley). This provides a required libdb.so.2.

  c. then go through the installation as outlined in the instructions using rapidwiz.

  It fills correctly and I can see the login screen now.

  Now, I need to know how to put in place to automatically start all services after startup.

  Thank you for your help.

  Kind regards

  Sohail naima.