Similar Questions

• I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers. When I connect to internet I can't use photoshop on my main computer. Maybe it's that I had

  I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers I know. My desktop and my laptop. When I connect to internet, I am now unable to use photoshop on my main computer. It may be that I had photoshop on an old computer that I use is no longer, but I'm not sure. How can I get this sorting? Do I know if I have an activated copy on an old computer (which has been scrapped) and get it off?

  If you had Photoshop working already on the machine, then it probably isn't a problem of activation.

  If you do not have to Support Adobe disable to you it must be done for all installations since each machine cannot be targeted by them.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  This could apply: how we prevent cloud creative resume my perpetual license CS6?

  https://forums.Adobe.com/thread/1584746

• Proved the practical suggestion: physical to virtual (P2V) migration preparation and success - a guide to the real world experience.

  (Current and evolving paper)

  I propose to publish a paper on the key factors to do a P2V project run as smooth as possible and complete timely. The reason? According to me, there is a gap in the confidence of the SMB in the start-up of an operation of codification (in any form) of a Virtual Infrastructure.

  The document is not intended to be a step by step guide but to contain the following topics: by commercial considerations, operational requirements, review, target, during Migration, Communication tools and procedures P2V environment.

  This publication will be sprinkled with real-world examples of how a general text book approach doesn't always work with pointers on how to opt out of the most common misconceptions.

  Two high-pressure and successful migration (a merger and a disaster recovery / business continuity gap) will be the basis of the experience I'll shoot of.

  Comments and thoughts are valued for:

  The...

  (1) target audience.

  (2) the structure.

  (3) the style of output.

  (4) the notice of application for this document.

  Kind regards

  Darren.

  BUZZ!

• Difference between Oracle Designer and developer of forms

  Hello
  
  Could someone explain to me the subject
  
  
  Rgds
  
  sexy

  Oracle Designer is a complete computer-aided design tool and software development. It gives you a set of tools for logical design as an entity-relationship diagrammer, a Process Modeler and a stream Diagrammer. It has a set of design tools from database to physical database design. It can also help to design modules of Oracle Forms application, reports Oracle, PL/SQL Web Toolkit or Visual Basic (VB6, I think, but versions not later as VB.Net). It will then generate these modules. It stores your designs in a metadata repository in an Oracle database, and you can make some nice reports your design data.

  Oracle Forms Developer does one thing and does it very well - it allows you to design and develop modules of Oracle Forms. Note that Designer can do this too, but because the designer generates your forms, you don't have quite as much control over the way they look and work like you would with the Oracle Forms Developer.

  One last thing, these tools are considered to be "mature". For Designer, this means that not much has changed or improved for a while. Forms, however, is still a few changes and improvements with each new version. Nothing really important, but more designer. See the statement of management tools for more information.

• [ADF, JDev12.1.3] How to design and integrate PDF reports in my web application?

  Hallo,

  I would like to know if JDeveloper offers the functionality for creating visually (dependent or not data db) reports for which the client can see the preview and then print the PDF file.

  It would be very useful to design a report like UI (so for example drag attributes from VO instance to the report).

  Thank you

  Federico

  No, there are none of these available components. You will need to create one yourself (doable but complicated) or use another product the report design, and then call the report of your app engine to return the repost for example in pdf format. The user can to decide to print it or not. At this point, the report is already downloaded on the client as for example pdf.

  Timo

• Differences between Oracle Real Application Clusters 11 g 1 material and GR 11, 2

  Hi Experts,

  Please give me the differences between RAC Oracle 11 GR 1 material and GR 11, 2.

  Thanks in advance,

  Kalashnikoff.

  From GR 11 1 11 GR 2 material, there is not much on the side of the data base which is different with respect to Oracle RAC. Which means that anything like that again for a server Oracle 11 g RAC 2 is too new for an Oracle 11 GR one-time 2 server.

  On the side of the grid Infrastructure, the biggest difference is the introduction of the listener SCAN.

  See you soon,.

  Brian

• Model real world observer in the CF?

  I'll put together some course material for my companions to desktop on design patterns in ColdFusion. I'm having a hard time coming up with an real realistic example of what situations would be a good candidate to be resolved by a model of an observer in a CF web app.  There are certainly many examples of how to implement the model in the CF, which is great, except that I don't really find a lot of scenarios that the examples are based off of meaning in a web application environment - many of them are based on Java examples where references to the observer/observable objects are maintained for life (session) of the application.

  In a CF web app, this seems as it would only make sense if you were dealing with Singletons for objects of the observer and the observed so that their references to exist outside the scope of a single page from loading.  However, I'm having a conceptual block to come with a pressing problem on why you need an observer as part of a single page model CF.

  I'd like to hear other devs CF come into contact with any real world examples.  I'm sure that I could probably something like LogBox refer to as an example of the behavior, but I was hoping for a very simple example that I could use, put a code in front of my developers.

  Thanks in advance!

  -Michael

  A few years ago, when I, too, was grappling with design patterns, I found a few useful items from Microsoft MSDN. One of them, the paper by Doug Purdy and Jeffrey Richter on the model of the observer, is very good and contains an example of the stock market.

  I don't see how you arrive at singletons for observers. More on that in a moment. The essence of the observer model exceeds the programming language, syntax or implementation details. All what you need to know is in the scheme of traditional patterns (which I reproduce here of Wikipedia on the model of the observer).

  

  Indeed, the diagram itself is very suggestive and can help you find examples of your own. There are 2 main roles, the observer and the object. There is a dependence as little as possible (i.e. loose coupling) between them. This allows either to change their internal mechanisms without affecting the other.

  At its most simple, with only 2 roles, the observer observes the subject. The subject has to turn standby on a dynamic resource which the observer wants to know.

  In most practical applications, there is more than one observer interested in the dynamics of resources. The subject has the responsibility to inform each of the resource, or any change observer. To be able to do so, it maintains a list of observers. Each observer has a responsibility to be notified by the subject. That's all. It is said that any system that works in this way, apply the model of the observer.

  The example of most common practice is a newspaper publisher and the subscribers. The Publisher made the object, the observer subscriber, and news from the dynamics of resources. In fact, much like Hoover became synonymous for vacuum cleaners, so too has Publisher-Subscriber become a synonym for the model of the observer.

  Let go of the need for a coupling between the observer and the object means that none of them should use shared or global variables. These variables create tighter form of coupling possible. So back to the issue of giving observer using a singleton or not. I wouldn't do it. Absolutely not. A singleton is an application-scope variable, so shared and would be pairing.

  To keep the loose coupling, it is usually recommended to implement the observer and the object as an interface. Classes representing the actual topic and concrete observer would then be the attention of implementers of the respective interfaces. Each of these concrete classes could radically change its internal structure, and the outside world would not notice. This is because the respective interface for the observer and the subject remains intact.

  Now to the Enigma of a practical example of the observer model in the context of a future ColdFusion page. In the model of the observer, the subject is of necessity an earpiece, listening on a dynamic resource object. Therefore, the ColdFusion page that represents the object must be a listener CFC. There is already an example built into ColdFusion. It's the DirectoryWatcher event gateway. Use inheritance to adapt to the CFC to include features in order to maintain a list of observers in the database. Include, for example, requests to inform observers by email whenever a change occurs in a directory.

• Multisim to interface with the real world material

  Hello

  View of Lab is a completely new software for me... I'm trying to findout, is it possible to interface multisim with labview for harware reald circuit I need to design to test the operation and test the parameters of an operational amplifiers real automated using the events of the loop. Could someone help me please

  This is the response I got from the technical support of OR

  "Although it is technically possible to use Multisim and LabVIEW with real data, we do not recommend it."  Multisim is not a simulator in real time and even for a small circuit, it would take the Simulator several minutes to produce a second, a data value. Since then, Multisim is simply too slow when compare the time in the real world, your application will be not very reliable. »

• What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

  What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

  If you want to extend the pages of EBS, you need to use the OA framework for 12.2 version.  There is no native support for the extension of EBS by using ADF pages.

  If you want to build the ADF custom applications that integrate with EBS you can watch using the SDK of the EBS (see My Oracle Support) that offers a number of design patterns to allow you to do.

  With respect to the version of Fusion Middleware based on EBS 12.2, take a look at the notes 1911660.1.  11.1.1.6 is currently the base version supplied with 12.2.4 with the 11.1.1.7 version is the highest version supported.

• How to design and develop?

  How to design and develop?

  I know that it depends on many things such as knowledge, preference, purpose, resources, etc... but I'm curious how different developers (level of expertise) actually prefer or implement their Web sites. I decided to make this post after two rounds of various forums about 1. Templates and PHP, and 2. Development of the back-end.

  1. How do you generally approach a project?-wired, Freehand (because it is), model PSD, etc. - think - you have a specific 'methodology' or procedure?

  2. What are the 2-3 of your main resources / sites / apps etc you are using (and what for?)

  More precisely: what you use (and how) to get a Web site? (I know once again that depends on a variety of things, but in general..) * also if you want to comment on your expertise or maybe useful level.

  Would you rather (benefits / drawbacks of :)) What advice would you give to the topic below?

  • Built your own Script HTML/CSS/base site you have mostly (if not completely). (More control and original, but more difficult / tedious for beginners)
  • HTML Temlplate (change the HTML and CSS code) - type of not setting (quick and easy, but generally poor quality, obsolete?)- but some may servde as a good starting point.
  • WordPress (and others such as Drupal, Joomla) (pretty quick and easy access to wring a quality WP Theme with possibility for a large number of features - search, databases, forms, etc. (otherwise could have trouble with features without good knowledge og PHP and MYSQL, maybe others?) - but the kind of "bypass" real HTML design?)
  • Types of frames such as Foundation, Bootstrap, skeleton
  • A combination or hybrid methods? - or any other method, I forgot?

  Thank you very much for any idea that you can offer, hopeully, this will lead to a lively discussion. -.

  Not quite.   Don't forget there are client-side and server-side apps applications.

  AJAX is client, which means that the browser does all the heavy lifting.  If the end user has JavaScript disabled, nothing happens.

  PHP MySql & are server-side.  It doesn't matter what browser settings has the end user.  The bulk of the work is done by the web server.

  XML is NOT a database on the server side.  It is just a file text used by the browser.  Useful for storage of light data, but certainly not to a large scale CMS or blog for example.

  Apache is an application web server that is commonly found on Linux servers.  It has nothing to do with AJAX.

  Nancy O.

• example 2-channel oscilloscope VI using real-world signals

  I'm looking for an 2 oscilloscope channels VI that uses real-world signals, not simulated signals used by "two Chennel Oscilloscope.vi' I found under examples when I searched"Scope"or"oscilloscope ".

  I found on a site OR "One_Channel_Simple_Scope.llb".  I think he uses real-world signals.  I downloaded it but not able to run the VI.  When I tried to do, it didn't compile successfully.  The error messages were several subVIs are not found: DAQmx read.vi, DAQmx timing.vi, etc.  I have LV 8.6 and NI 6221 Multifunction DAQ card, installed in a standard configutration in an environment of Winows Vista.  I define a variable say LV path where to find these screws?

  Thank you.

  Not a sampling frequency is high, but this uses entries of the sound card on L and R for 2 channels:

  http://decibel.NI.com/content/docs/doc-4834

  Have you installed traditional data acquisition and not the more recent style DAQmx drivers? Maybe it's the source of your mistakes.

  -AK2DM

• All power back on "LabVIEW: [connected] A Real World integration Developer Guide.

  Any comments on

  "LabVIEW: Guide the developer in the real world integration [connected].
  "  ?

  IMHO, the course of LV connectivity and you know as much as the authors - perhaps more.

  Mike...

• FSX Real World Weather is not updated

  I noticed, for about 3 weeks now the real world the weather on my FSX is not updated, even if it's the connection to the server and time to load correctly. The time is the same that it was 3-4 weeks, but I'm looking on the outside and it is very different! I have cleared my history and the browser cache, deleted all of my temporary files and nothing seems to solve the problem. Now this is extremely frustrating - welcomed the help!

  Hi tombeckett2285,
   
  Please follow the steps described in this article, as this seems to be a known problem and the steps in the article should help you to solve the problem.
   
  Known issues with the Real-World Weather in Flight Simulator feature
  http://support.Microsoft.com/kb/841214
  
  Aziz Nadeem - Microsoft Support

• WRT1900AC: Determine the real world IP via Smart Wi - Fi?

  I have a router 1900AC. I can manage it remotely via Smart Wi - Fi (www.linksyssmartwifi.com). However, I have not discovered a way in the user interface to determine what is the IP of my router, when I'm out and about.

  You'd think something would be the State of the surface network widget frankly, or perhaps been under connectivity or Internet settings... but it's not.

  I can't find my IP 'real world' anywhere in the UI Smart Wi - Fi.

  Suggestions?

  Troubleshooting-online status-online report-Internet connection-online Internet address online

• LAN/WAN design issues: redundant network core design and equipment

  Dear all,

  I have a growing network that has inherited the reliability and scalability issues:

  (Example from my existing network)

  

  We pop connected with us through lines of CF, that LSPS are connected to our CF traverse on persistent organic pollutants.

  Now, it is necessary to make the core of switching (switch with "?" mark) redundant

  because this is the point of concentration of all connections outside.

  I got an appointment in order to study new equipment (now it's just Catalyst 3560) for this network block.

  Unfortunately, the budget is pretty low.

  I have the following considerations:

  I think that the main problem is that most of the connections is L2 trunk links and it is difficult to prevent this.

  It seems that I need to duplicate all the links to LSP FC, pop and branches (this seems doable) and rely on STP! (this seems bad)

  with all of these links.

  Currently, I have two options for the basic block:

  1. two Catalyst 3750 have duplicated links. (CSW1 LSP1, CSW2-LSP1) and rely on STP

  2. a switch Catalyst 4500 series with two redundant supervisors (probably, they allow to buy if there are strong arguments) have reproduced links and rely on STP.

  These two options do not look good because I have to rely on STP with LSP.

  I would use redundancy features and L3 protocols, but do not know how to avoid trunks

  I have no experience with the material of fantasy as a Catalyst 4500/6500 series.

  Could someone please advice me alternatives for options of design and of the hardware and confirmation or withdrawal of my options.

  Also, I would be grateful if someone could help me find strong arguments for the acquisition of Catalyst 4500 series light up the core.

  Thank you much in advance.

  Best regards

  Max

  Hi Max,.

  in the diagram and description that you provided the switch, you need to replace is a dashboard device that works only for the moment, in L2

  If you plan to go L3 communications in this device, you should review your design to the whole of the network and also review/discuss with MS how that can be converted into L3 communications

  If you want to keep the same as L2 and introduce it into the device or devices for redundancy, I'd rather have two redundant devices of a redundant chassis that I mean pair of 3750 is more reliable chassis 4500 with equipment redundant as soup, UPE however its a reliable option as well and again for sure

  If you rely on STP for redundancy, what is the problem here? It is time of convergence or what is your concern?

  hope this helps