Similar Questions

• How IMAQ to convert pixel to work in the real world?

  Hello

  I wonder how IMAQ to convert pixel to work in the real world?

  See the example for vision Calibration.vi Simple, is the actual formula used by "IMAQ convert from pixel to the real world" will receive the axis (mm) calibration of the axis of the image (pixel)? What calibration information is used in the formula.

  You are looking at this thing?

  https://zone.NI.com/reference/en-XX/help/370281M-01/nivisionlvbasics/perspective_and_nonlinear_disto...

• Real world VLSM?

  Hi guys

  I'm studying for my CCENT and need a little help. I am struggling with the concept of VSLM. I know how it works and I can set it up but I am struggling to find out when it would be used in the real world other than to the ISP.

  For example, if I had a 10 network VLAN and 200 guests by VLAN could ' t I just use the below?

  192.168.1.0/24 VLAN 1

  192.168.2.0/24 VLAN 2

  etc.

  I think small?

  Can someone give me some real world examples of when to use VLSM and why?

  Thanks in advance.

  Yes, of course if you have 200 guests, you can go with the model you specified above. World real VLSM, I can give you a base case for both routers. R1 and R2 are connected together, no other host has access to this segment because they are directly related. It makes no sense using a set of 24, which is 251 host addresses will lose, imagine a large-scale network, with many routers from point to point. Hmm, a lot of waste!

  So whereas we choose a 30, with only 2 host addresses, a subnet address and address of dissemination, and we can calve until our 24 or something else perhaps, more effectively.

  Regarding the public IP (no RFC1918) some ISPS and company go with 31, no network address, no broadcast address. Just two addresses to host. It's how tight, we now for IPv4 address space.

• Model real world observer in the CF?

  I'll put together some course material for my companions to desktop on design patterns in ColdFusion. I'm having a hard time coming up with an real realistic example of what situations would be a good candidate to be resolved by a model of an observer in a CF web app.  There are certainly many examples of how to implement the model in the CF, which is great, except that I don't really find a lot of scenarios that the examples are based off of meaning in a web application environment - many of them are based on Java examples where references to the observer/observable objects are maintained for life (session) of the application.

  In a CF web app, this seems as it would only make sense if you were dealing with Singletons for objects of the observer and the observed so that their references to exist outside the scope of a single page from loading.  However, I'm having a conceptual block to come with a pressing problem on why you need an observer as part of a single page model CF.

  I'd like to hear other devs CF come into contact with any real world examples.  I'm sure that I could probably something like LogBox refer to as an example of the behavior, but I was hoping for a very simple example that I could use, put a code in front of my developers.

  Thanks in advance!

  -Michael

  A few years ago, when I, too, was grappling with design patterns, I found a few useful items from Microsoft MSDN. One of them, the paper by Doug Purdy and Jeffrey Richter on the model of the observer, is very good and contains an example of the stock market.

  I don't see how you arrive at singletons for observers. More on that in a moment. The essence of the observer model exceeds the programming language, syntax or implementation details. All what you need to know is in the scheme of traditional patterns (which I reproduce here of Wikipedia on the model of the observer).

  

  Indeed, the diagram itself is very suggestive and can help you find examples of your own. There are 2 main roles, the observer and the object. There is a dependence as little as possible (i.e. loose coupling) between them. This allows either to change their internal mechanisms without affecting the other.

  At its most simple, with only 2 roles, the observer observes the subject. The subject has to turn standby on a dynamic resource which the observer wants to know.

  In most practical applications, there is more than one observer interested in the dynamics of resources. The subject has the responsibility to inform each of the resource, or any change observer. To be able to do so, it maintains a list of observers. Each observer has a responsibility to be notified by the subject. That's all. It is said that any system that works in this way, apply the model of the observer.

  The example of most common practice is a newspaper publisher and the subscribers. The Publisher made the object, the observer subscriber, and news from the dynamics of resources. In fact, much like Hoover became synonymous for vacuum cleaners, so too has Publisher-Subscriber become a synonym for the model of the observer.

  Let go of the need for a coupling between the observer and the object means that none of them should use shared or global variables. These variables create tighter form of coupling possible. So back to the issue of giving observer using a singleton or not. I wouldn't do it. Absolutely not. A singleton is an application-scope variable, so shared and would be pairing.

  To keep the loose coupling, it is usually recommended to implement the observer and the object as an interface. Classes representing the actual topic and concrete observer would then be the attention of implementers of the respective interfaces. Each of these concrete classes could radically change its internal structure, and the outside world would not notice. This is because the respective interface for the observer and the subject remains intact.

  Now to the Enigma of a practical example of the observer model in the context of a future ColdFusion page. In the model of the observer, the subject is of necessity an earpiece, listening on a dynamic resource object. Therefore, the ColdFusion page that represents the object must be a listener CFC. There is already an example built into ColdFusion. It's the DirectoryWatcher event gateway. Use inheritance to adapt to the CFC to include features in order to maintain a list of observers in the database. Include, for example, requests to inform observers by email whenever a change occurs in a directory.

• Multisim to interface with the real world material

  Hello

  View of Lab is a completely new software for me... I'm trying to findout, is it possible to interface multisim with labview for harware reald circuit I need to design to test the operation and test the parameters of an operational amplifiers real automated using the events of the loop. Could someone help me please

  This is the response I got from the technical support of OR

  "Although it is technically possible to use Multisim and LabVIEW with real data, we do not recommend it."  Multisim is not a simulator in real time and even for a small circuit, it would take the Simulator several minutes to produce a second, a data value. Since then, Multisim is simply too slow when compare the time in the real world, your application will be not very reliable. »

• Oracle real world ADF design and architecture main courses

  Hello

  Please consider the video "ADF Architecture TV - who is it for?"

  at http://www.YouTube.com/watch?v=_Fo2KdTjp-w

  In this video, Chris Muir mentions "...". What you may not know, is that Architecture ADF TV channel has developed a number of PowerPoint presentations or an internship at Oracle called "Oracle real world design ADF and guiding architecture courses. ..."

  This "course" is a course that can be taken by customers of Oracle (or partners)?

  Pointers to information or resources about this course are welcome.

  Thank you very much

  Jan Vervecken

  Jan,

  in fact you attended parts of this training to the Portugal earlier this year. We then deployed EMEA (Munich, Lisbon, Warsaw) and now the North American (inviting partners at these events - Munich was followed by 43 people, who for the most part where the partners).

  The training is developed by MP for everyone but we cannot deliver it in person as often as we need. Some Oracle employees attended a training of trainers event and will be re - run locally (PTS as far as I know think of doing a session - don't know where in the EMEA region)

  Chris and I, as well as others in the team currently save sessions (although brief because we do not have the chance to discuss topics on YouTube as we can in the classroom) to make the content available to the public. We hope to add value by the recording sessions and look for free content as quickly as possible. We started with the release 1 video per week, but as soon as our recording buffer fills up, will have of switching devices.

  Frank

• Proved the practical suggestion: physical to virtual (P2V) migration preparation and success - a guide to the real world experience.

  (Current and evolving paper)

  I propose to publish a paper on the key factors to do a P2V project run as smooth as possible and complete timely. The reason? According to me, there is a gap in the confidence of the SMB in the start-up of an operation of codification (in any form) of a Virtual Infrastructure.

  The document is not intended to be a step by step guide but to contain the following topics: by commercial considerations, operational requirements, review, target, during Migration, Communication tools and procedures P2V environment.

  This publication will be sprinkled with real-world examples of how a general text book approach doesn't always work with pointers on how to opt out of the most common misconceptions.

  Two high-pressure and successful migration (a merger and a disaster recovery / business continuity gap) will be the basis of the experience I'll shoot of.

  Comments and thoughts are valued for:

  The...

  (1) target audience.

  (2) the structure.

  (3) the style of output.

  (4) the notice of application for this document.

  Kind regards

  Darren.

  BUZZ!

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• All power back on "LabVIEW: [connected] A Real World integration Developer Guide.

  Any comments on

  "LabVIEW: Guide the developer in the real world integration [connected].
  "  ?

  IMHO, the course of LV connectivity and you know as much as the authors - perhaps more.

  Mike...

• FSX Real World Weather is not updated

  I noticed, for about 3 weeks now the real world the weather on my FSX is not updated, even if it's the connection to the server and time to load correctly. The time is the same that it was 3-4 weeks, but I'm looking on the outside and it is very different! I have cleared my history and the browser cache, deleted all of my temporary files and nothing seems to solve the problem. Now this is extremely frustrating - welcomed the help!

  Hi tombeckett2285,
   
  Please follow the steps described in this article, as this seems to be a known problem and the steps in the article should help you to solve the problem.
   
  Known issues with the Real-World Weather in Flight Simulator feature
  http://support.Microsoft.com/kb/841214
  
  Aziz Nadeem - Microsoft Support

• My flight simulator real-world weather is stuck 24/7. How can I solve this problem?

  My flight simulator real-world weather is stuck 24/7.

  Hi Jack,

  I suggest you post this question in the FSX forum here: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Thank you.

• WRT1900AC: Determine the real world IP via Smart Wi - Fi?

  I have a router 1900AC. I can manage it remotely via Smart Wi - Fi (www.linksyssmartwifi.com). However, I have not discovered a way in the user interface to determine what is the IP of my router, when I'm out and about.

  You'd think something would be the State of the surface network widget frankly, or perhaps been under connectivity or Internet settings... but it's not.

  I can't find my IP 'real world' anywhere in the UI Smart Wi - Fi.

  Suggestions?

  Troubleshooting-online status-online report-Internet connection-online Internet address online

• BlackBerry smartphones, why I can't use my world asks? It is said that it requires the latest version of blackberry id.

  What should I do? why I can't use my world asks? It is said that it requires the latest version of blackberry id.

  Use your browser to go to www.blackberry.com/appworld and download the latest version of AppWorld.

  who should also update your BlackBerryID.

• BlackBerry smartphones can not use APP World

  Hello world

  I have a problem with my BB tourch 9800 and I already have the blackberry service, but I can not use APP World when I open it I get this message (blackberyy APP World is not currently available in your country. Please check blackberry.com appworld for updates). so is there another way to download and install blackberry applications?

  not: iam in Iraq

  operator: Asiacell

  Hello and welcome to the community!

  Please check this page to ensure that you meet the minimum requirements (including if it is available in your country):

  • http://NA.BlackBerry.com/eng/services/appworld/download.jsp

  If it is available in your country and you feel you meet the requirements at the level of the device, and then contact your provider to make sure you meet the requirements of the plan (to them) access (via their network) service to AppWorld.

  In addition, the latest version of the AppWorld is currently accessible only through your corporate data network - WiFi is not used for access to AppWorld under any circumstances. Therefore, you must subscribe to a sufficient level data plan so that the AppWorld to function.

  • KB23854"a data plan is required to use this feature" sometimes appears in BlackBerry App World

  Further still, you should know that AppWorld is simply a portal, vending apps developed mainly by others. Therefore, it is not your exclusive supply source - there are others that you can try:

  • AppWorld in some countries
  • MobiHand worldwide
  • Handango worldwide
  • BPlay worldwide
  • GetJAR worldwide

  I found that there are very few applications that is exclusive to AppWorld. You can see the online catalogue and then look for other sources of supply, including quite often on the developer website.

  Finally, understand that RIM has no unilateral control over the availability of AppWorld. They must ensure that they and their partners meet local laws and operating a system of e-commerce legislation - and that can take time. AppWorld is in more than 110 countries now and adding more every month.

  Good luck!

• After purchasing the cloud creative and used for 2 months (for example), so I don't use it for 3 months. How is it? I don't have to pay the tariff for each month, or is it possible to only pay when I use it again? To resume: if I use it for 5 months a

  After purchasing the cloud creative and used for 2 months (for example), so I don't use it for 3 months. How is it? I don't have to pay the tariff for each month, or is it possible to only pay when I use it again? To resume: if I use it for 5 months a year, I have to pay for only those 5 or 12 months?

  No, if you have a subscription according to the type of subscription, you will have to pay each month or year until that you cancel.

  If you think you would use the apps for only three months, then you will not need three months, then our month to month plan would be best for you because it can be cancelled at any time it does not come with an annual contract for more information see the link below

  Adobe - General conditions of subscription

  Kind regards

  Bani