Order of installation during upgrade of patch in the deployment of small ACS
Hello
I am upgrading to 2 ACS of 4.1.4.13 for 4.1.4.13 patch 20 devices. They are configured as main and secondary. In the documentation, I don't see any restrictions that should be the first machine to be upgraded. Must a be the first to be placed on level and therefore, the 'new' primary backup?
Thank you very much.
Assuming that all devices are the primary ACS IP-oriented, you must stop the replication, upgrade the backup, then upgrade the primary and then enable replication. Although I see no problem with upgrade from the first primary after replication has been stopped.
HTH,
Atif
Tags: Cisco Security
Similar Questions
-
Is the installation of upgrade (DVD) depending on the language support?
Hello
I live in Germany, but possess an English 10 PSE. I want to upgrade. Is language-dependent upgrade installation media? There are a lot of specific offers as 'English update' / 'upgrade German' in internet shops, but is - this correct? Or is the installation of upgrade multilingual DVD anyway and simply existing software is automatically entered?
Kind regards
Matchay
It is not a problem. Normally, you select your working language during installation.
-
Meet the error code during upgrade to Windows 10 Windows 7
I encounter an error code: 0xc1900204 during the upgrade of Windows Windows 7 10. Anyone has idea what the code refers to, and how it can be fixed?
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Make sure your machine name is simple not periods or hyphens or dashes.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
How to: upgrade previous versions of Windows using the file ISO for Windows 10
How to download official Windows 10 ISO files
You can try other things:
-
In despair because of the constant failure of Windows updates, I resolved to follow the suggestion of Microsoft with an 'install-> Upgrade' from my original installation disk.
After a short so that I get a message that it is not possible because my version is newer than the one on the CD.
Issues related to the:
- Why Microsoft finally proposes an update (patch) procedure that works correctly?
- Why Microsoft suggests a repair procedure (the upgrade of the installation disk) that does not work?
- Is there a way to force the upgrade procedure to do its job properly?
- Win 10 will have the same function of shit update?
I am running MS Windows 7 pro/64 SP1
Thanks for any helpful info
Ed
Hello
It would seem that your original DVD came without Service Pack 1.
Over time, you installed SP1 that makes the operating system newer than the one on the DVD.
Uninstall SP1 > do the installation of upgrade repair > reinstall SP1.
See you soon.
-
Hello, I'm Michael.
I'm a guy who lives in Hong Kong, I bought a laptop that comes with Chinese traditional x 64 Windows 7 Home Preium. I want to use this laptop as a computer professional. Because I don't want to use Chinese as my default language in my computer, so I'm going to upgrade my computer I have subscribed the TechNet, so I downloaded an iso file from the Microsoft TechNet Web site. I downloaded an English x 64 to windows 7 Ultimate. I hope it would work, but an error message is skipped during the upgrade. It is said: you can do an upgrade using an installation disc that's different from the language installed on your computer. Go online to see how to install Windows 7 and keep your files and settings.I tried to press the hyperlink (go online) and it does not at all. I have to ask this question to the Microsoft Answers and see if if anyone can give come me advice because I do not want to click on the custom button because there are some files saved in my computer. So I need answers as soon as possible because I could die without a PC! Thanks for all those who read this and you time.No direct path to the evolution of the Chinese language to English. But you can upgrade your version of Home Premium to Windows 7 Ultimate (upgrade Express). Ultimate has support for English and a number of other languages.
=================================================
If you have a retail version of Windows 7, then use the "Anytime Upgrade":
When you use the "Anytime Upgrade" option, all what you need to do is enter the product Windows 7 upgrade key has been purchased. Do this by clicking on: start/search and enter: upgrade ExpressUpward to a more powerful edition
http://www.Microsoft.com/Windows/Windows-7/get/anytime-upgrade/Home-Premium.aspxUpgrade to another edition of Windows 7 by using Windows Anytime Upgrade
http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-UpgradeA 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
http://windowsteamblog.com/blogs/Windows7/pages/the-Windows-Anytime-Upgrade-experience-for-Windows-7.aspxPaths to upgrade Windows 7 (supported upgrade scenarios)
http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspxWindows Anytime Upgrade is supported only in the following countries:
Australia, Belgium, Canada, France, Germany, Italy, Japan, Netherlands,
Spain, Sweden, Switzerland, United Kingdom and United StatesWindows 7 Starter to Professional upgrade Express
http://www.Microsoft.com/Windows/buy/Windows-7-upgrade-Starter-to-professional.aspxMost likely the best option and the most popular will be the Home Premium upgrade to Windows 7 Professional, which includes Windows XP Mode. The extra $50.00 for Windows 7 Ultimate will only give you two additional features, bitlocker (for security) and the ability to switch between any of 35 languages.
Windows 7 - Anytime Upgrade - frequently asked Questions:
http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questionsWindows 7 - upgrade Express features:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-UpgradeWindows 7 - version comparisons:
http://Windows.Microsoft.com/en-us/Windows7/products/compare-editionsMS Windows 7 store price:
http://www.microsoftstore.com/Store?defaultKeyword=Search&siteid=msstore&action=list&CategoryID=38336300&Keywords=Anytime+Upgrade&result=Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
The Express Upgrade "may" not always work for users who have system integrators and or OEM product keys, this applies also to VL (Volume License), MSDNAA or key teaching will not work with the Express upgrade. KMS users consult your administrator before attempting to perform an Express upgrade.J W Stuart: http://www.pagestart.com
-
During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!
MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.
I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled. Make sure that you use the serial number that ends in 7886.
If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade. If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation. You can contact our team of support directly in Contact with the customer. You can try to install a web browser, you have not previously used. It of probably a toolbar or other software applications affect your ability to access the media cat successfully.
If you are unable to reach our support team, then please check your account information is accurate. If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.
I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.
-
patches after the installation of EBSR12.1.1
On the Oracle metalink document after you install the EBS R12.1 on windows, you must apply the
following hotfixes
p8327888
p8421008
p8510377
Are these necessary package
If I don't do this, influence on current installation
or what effect they made during installationHello
It is strongly recommended that you apply these patches according to Note: 761567.1
These patches solve the following:
-Perl regression test failure
-Patch Application Wizard (admsi.pl) cannot start GUI
-Element of Configuration failing AutoCreateIf you're not going to patch this facility and it is only for learning purposes, you can jump to apply these fixes.
Kind regards
Hussein -
Tecra A10 - order of Installation for XP
Hey all,.
I'm looking for an install command for the Tecra A10 for 32-bit Windows XP Pro. Do a clean install of an image and want to do things.
Any help would be great.
See you soon,.
Dave
Hi Dave
You must install Windows XP Home edition and all the stuff of Toshiba following this order of installations:
Windows XP Professional SP3
Chipsets Intel (r) software installation utility
Intel (r) Matrix Storage Manager (iMSM)
Intel Cantiga Vista driver
or
NB9x Vista NVIDIA display driver
Realtek HD Audio Driver
TOSHIBA common modules
Effect of Mic TOSHIBA
ALPS Pointing-device Driver
TOSHIBA dual pointing devices Troubleshooter
OnOff TouchPad utility
TOSHIBA software modem
Driver Intel internal LAN
AMT of Intel(r) Management Engine Interface AMT4001089BC
Intel Wireless LAN driver
Atheros Wireless LAN driver
Battery Bluetooth for Windows
Logon Key TOSHIBA wireless
RICOH Media Driver
O2Micro smart card reader driver
TOSHIBA HDD Protection
TOSHIBA SSD alert
TOSHIBA SD Memory utilities
TOSHIBA SD Memory Boot Utility
TOSHIBA Hotkey Utility for display V3.4.5.5 for Intel VGA devices
V3.4.7.0 for nVidia VGA
TOSHIBA screen utility unit of change
180 degree TOSHIBA Rotation utility
TOSHIBA zooming Utility
TOSHIBA Power Saver
TOSHIBA Mobile Extension
TOSHIBA utilities
Password TOSHIBA utility
Wireless keyboard shortcut
TOSHIBA ConfigFree
TOSHIBA management console
PC Diagnostic tool
TOSHIBA Assist
TOSHIBA controls
Sleep USB TOSHIBA and service charges
TOSHIBA PC Health Monitor
TOSHIBA cooling tool Performance Diagnostic
CD/DVD Drive Acoustic Silencer
Infineon Trusted Platform Module utility
AuthenTec fingerprint utility
Chicony Camera Assistant Software
TOSHIBA security assistPlease let us know if you have installed Windows XP Home edition and all Toshiba stuff correctly.
I hope that everything will be OK. ;)Good luck!
-
Satellite U400 - 138 (PSU44E) - order of installation of drivers for Windows XP
Hello
I have the Satellite U400-PSU44E. I had to install Windows XP Professional. Under XP I have problem with installing the drivers. I downloaded Windows XP drivers from the Toshiba web site.What is the correct order of installation of drivers for this model?
Best regards
Hi mido_92,
I can give you the order of installation of my Satellite U400 installation and it worked:
Windows XP SP3
Windows updates
Sun Java 2 Runtime Environment
Intel Chipset driver
Intel driver
Audio driver Conexant CX20561
Driver LAN Marvell 8040/8055
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem driver
Modem region Select utility
Intel Wireless LAN driver
or
Atheros Wireless LAN driver
or
Realtek RTL8187B Wireless LAN Driver
Chicony camera software
Bluetooth Stack for Windows by Toshiba
Software/driver of fingerprints
TOSHIBA common modules
TOSHIBA SD Memory utilities
TOSHIBA ConfigFree
TOSHIBA Assist
TOSHIBA Speech System
CD/DVD Drive Acoustic Silencer
Toshiba HDD Protection
TOSHIBA PC Diagnostic Tool
TOSHIBA Touch ED
TOSHIBA Hotkey Utility
TOSHIBA utility
TOSHIBA control utility
TOSHIBA Power Saver
Toshiba zooming Utility -
Order of installation satellite P755-11U own Win 7
Hello world.
I want to perform a clean installation of Windows 7 on my laptop and to navigate on the driver page toshiba and forum for the correct order to install drivers & utilities, but without success. Could someone help me please?
Hello
May I ask why you n t use disc recovery Toshiba which already contains all the drivers and tools?
In General, the order of installation is not so important. Just start with the chipset driver installation, then graphics card, LAN, etc.
Check some similar topics and you can find some useful information and advice. ;)
-
The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
The version of this file is not compatible with the version of Windows that you are running.
I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
Maybe nobody knows what could be the problem?Hi Hal K,
Thank you for visiting Microsoft Answers.
If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.
If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.
You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows
http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
Swati K - Microsoft support technician
Visit our Microsoft answers feedback Forum and let us know what you think. -
Engine performance and the order of installation NOR-DAQmx
Hello fellow developers:
I'm looking at a product manual which contains instructions to install the driver OR-DAQmx, a software product installer created with LabVIEW 2009 SP1 full, then the 2009 LabVIEW runtime engine in that order.
This seems wrong - especially if a LabVIEW 8 (or previous) Run Time Engine is already installed.
Because I need to test the installation of my builds prior to distribution I will need to install on machines that have never had any product NOR and also on machines that can have previous engines run.
In my view, the correct order is to install the engine time run, OR-DAQmx and THEN the application. Before running the application USB device should be plugged in so the "Add Hardware Wizard" may install the USB driver.
What is the consensus on this?
Best regards,
Saturn
Dear Roman:
I know that the standard installation order. The product manual that I referred to is a published by a customer for their installation, not a OR Manual of the product.
I'll ask my customer to change their manual.
Kind regards
Saturn
-
Installation of upgrade or clean! Can I get a replacement product key?
I bought an upgrade to vista for my pc after that I tried to reformat from the original disc that came with the pc. My pc says that the"NTLDR is compressed" I tried many suggestions but nothing worked I learned that I needed to upgrade. I installed the update from XP to vista, but now it says that my product key is not valid, because it isn't an upgrade a clean install. I was not asked what kind of facility, I held at the beginning of the installation.
Can anyone help?
If the system does not detect an operating system (as for a startup problem), he made a clean installation - if an upgrade was possible, he would have given you this option (there not because he has not seen this option).
You must reiinstall the operating system of origin and then activate, then install the upgrade and then enable that. That you run under Vista. You cannot use an upgrade disk to do a full install - it willl allow you to do, but it will not activate the product.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Order of Installation of drivers from R3 Alienware 17, Windows 10
I understand that this question has been asked repeatedly by many people, but I know questions and wishes to confirm again the installation order more later to identify if I have a related question of drivers.
Please provide me with the list of drivers in the order of installation based on the names of the drivers on the support page, as it will be easier for me to understand.
Thank you
I have a 17R3 and I used the installation order proposed by Dell support page, with no problems.
HOWEVER, I do not use the graphics drivers from Dell; I used the screen to uninstall the utility driver and installed the drivers directly from Nvidia and Intel and continue to update these sources that Dell was so far behind in the early release of Skylake and Windows 10.
And you go to update your graphics drivers regularly so probably anywhere in the order that update you.
(BTW what direct installation of Nvidia, I do not install all the other stuff (GeForce experience, servers, etc.) that I never use.) Even with the Dell stuff, I don't bother with anything irrational
I also removed the Dell network drivers and use the driver on-line Rivet, had no problem with the networking since that.
It is possible that all of the current drivers of Dell are now very well, but at the end of last year, they were pretty useless.
See en.community.dell.com/.../19659262 and some of my other posts.
-
Order of installation of Windows 7 drivers
Hello! I'm hungry install Windows 7 Ultimate on a HP of one of my friends laptop and I was curious to know if there is an order to install specific drivers. I have a Dell laptop and it's really annoying because I read that the drivers must be installed in a specific order.
The order of installation should start by installing the CPU chipset device driver, after installing the chipset CPU I would install the SATA drivers (is it y to install) followed by the USB driver and driver graphic, after that the remaining drivers can usually be installed in any order.
Some of the factory can specify a different order I listed above, this could and most likely based on the design of the motherboard, if its an Intel or AMD processor and which in the feature on a separate chip (is not part of the CPU chipset), for example Audio is usually a separate chip on the motherboard.
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
flickering screen on startup after upgrade of macOs Sierra
My kind of paper paints of glitters at startup. It started to happen after I installed the new sierra of MacOs. Help, please.
-
How can I retrieve a deleted program? (DBMS)
We have a HP G50 laptop. He started running extremely slow about a week or two ago, so I went in programs/features and the only thing that has been installed in the last 2 weeks has been a microsoft program. Fearing that it was a type of virus, I d
-
32-bit Windows Vista is installed on the Satellite A210 - 10 c 64-bit processor
Hello I bought satellite a210 - 10 c with amd turion 64 X 2 processor, but I determined that I have * 32-bit * windows vista preinstalled. Does anyone know why?Could I get the 64 bit instead of 32 bit version?
-
I started with windows 3.1, upgrade to 95, place leveled for XP and 98 so all my records are updated. I don't want to go to win7. any help will be greatly appreciated.
-
I have a Zip Clip with USB MSC mode. (Especially!), I have no problem at all by dragging files through and listening to them. But some mp3 files are not recognized by the player. I don't think it's a problem of DRM, the problem occurs on a free conte