Organizer cannot see pictures

Similar Questions

• Cannot see pictures or video with the Explorer windows as a matter of fact, nothing works...

  I have searched the net but can't find my answer. I'm having a problem of windows Explorer is not a problem of IE I can not see my photos or can download photos from the internet or any device, I can't use the hotfix to resolve the problem because I can't open the files I can go on the internet of course and listen to videos and stuff but can not download anything... Need help :( I'm on a satellite toshiba C650D 5B129741Q not a virus problem, I hope... basically, it blocks when I opened my gallery just sitting there, saying does not, then it freezes and says Windows is looking for an answer, but I think it's a load of rubbish my windows will not get what is why I'm here essentially and I had the problem of update When it updates, then you go along happy go lucky and it says you need to update again, and it would be the same updates, I just install this problem well some how fixed itself, I think, or maybe I have done who knows at this point... I know it's a bit old and in the computer world my cell phone is essentially considered dead, but if I had to go and try to get my photos and videos out I would not be able to because it's time. He is 5 years old I think, but I don't think that would prevent me to go into my files I have windows 7 Home premium 64-bit system. I can't download anything I just download Avira for MSE and it was tampered with it turned on windows Defender, so I took out the MSE yesterday. I have AMD E = 350 processor and 4gig memory. now, my browser did not load so I could come back and list my processor and my memory this sux LOL. Even if I could download a photo or a video that I still cannot view or or even listen.

  Your hard drive is defective and will not last much longer and the more you try and use you'll more quickly to speed up his death (especially to see how many times you activated compared to how long it's on for on average)

  Your best bet would be to get a new hard drive and a new installation of Windows on it. Then connect your current hard drive as a slave/secondary drive upward and recover slowly from her files to your new hard drive

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore cannot see the bottom of the vertical pictures.  How can I get this problem to what it has always been - set of the workspace editing on

  My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore may not work on the bottom of the vertical photos.  How can I get that back to mount on display?

  Hi wassily.

  suggest you go menu window > workspace > reset Essentials

  and who needs to reset your workspace to the default.

  Kind regards

  Claes

• 10 iOS cannot download pictures

  Hello

  Since I've updated the iOS 10 dated my pc no longer displays my iPhone as a device when I attach using a USB key. I used to be able to connect my phone and open my pictures on my computer so I could save on my pC. Please help me understand how to get again my photos.

  Hello

  Your computer does see your iPhone, follow the steps detailed here:

  • On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

  More information:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• Cannot view pictures when I put the cd in the disc drive.

  I have pictures on a CD that I saved from my old computer. When I put the disc in the drive and I chose autoplay it I cannot see all of the photos. It shows the autoplay and then asks me to adjust these settings or revert to the default value. Once I put them and press on save the box disappears, and then I'm back and the control panel. I would like to know what I'm doing wrong.

  Hello bfiebiger10,

  Thank you for using Microsoft Vista answers Forum!

  What is the file format of the image file you are trying to open? I guess they are in .jpg format. You may need to use the default program features to set the program you want Windows to use for open your photo file.

  To set the default program to use the following steps:

  ·        Click Start > default program

  ·        Choose to associate any type of file or Protocol with a program

  ·        Select the type of file (file format) in the list, and then click Change Program

  ·        Choose the program that you want to use to open this file (e.g. Windows or MS Picture Photo Gallery Director) and click OK

  ·        Click close to exit from this window

  Try to open your CD again. Go to the computer; Double-click the CD icon to open it

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Cannot transfer pictures to gogear with media player 11 is it possible to install media player 10

  Cannot transfer pictures to gogear with media player 11 is it possible to install media player 10

  Niall CharlesHorgan Hi,

  1. what happens when you try to transfer pictures to your player? You get the error message?

  2. What is the model number of the player you are using?

  You will not be able to go back to Windows Media Player 10 in Windows Vista. Windows Vista comes pre-installed with Windows Media Player 11.

  The status is unknown the Philips GoGear compatibility in the Windows Vista Compatibility Center.

  Take a look at the following links and see if it helps:

  Set up a device to sync in Windows Media Player

  Windows Media Player sync: frequently asked questions

  The problems of synchronization

  In addition, you can contact Philips Support.

• see pictures in my pictures

  I have an old computer running windows 2000 Professional.

  In my pictures, I have pictures, but cannot see a picture of them unless I click on them?

  I can do something, or that I should up grade to a more recent version of Windows?

  Jim

  Here is the Vista Forums.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General&cat=en_us_22765189-A408-4423-8e95-f2050920b5e5&lang=en&CR=us

  Discussions in microsoft.public.win2000.general

  They will help you in the Windows 2000 Newsgroup at the above address.

  See you soon. Mick Murphy - Microsoft partner

• Machine of Windows 7 cannot see itself or other computers on the network.

  I work with a volunteer organization, is attempting to add a new computer to their network. Add the new computer is a laptop running Windows 7 Professional (32-bit, 6.1 build 7601).

  It is one of the three computers that connect via a wireless network, with the remaining three computers connected by Ethernet.
  One of the laptop is running Windows 7 Home Premium (64 - bit, 6.1 build 7601) and the laptop rest and three desktop computers running XP Professional (5.1, build 2600).
  The laptop running Home Premium has no problem with connectivity. He can see himself and all the computers on the network (with the exception of the new Windows 7 Professional machine). The XP machines can all be seen and also the machine Windows 7 Home Premium.
  The Windows 7 Professional machine, however, cannot see itself, or one of the machines running on XP. It may, for some reason, see the Windows 7 Home Premium machine.
  I can ping each computer on the network from him and he can ping other computers. I can even connect using his IP address and access the folders and files shared like this, but nothing I have seems to change him will appear.
  I tried to disable the Windows Firewall and Microsoft Security Essentials, neither of which has an effect any. The computers are all in the same workgroup and network machines Win 7 is set to work on both.
  I can't understand why this new computer should have these problems, I'm not a professional so there is probably something basic, I missed, but if anyone has any ideas I would be much obliged.
  Thank you very much.

  Hello

  The question you have posted is related to Windows 7 connected to an organization and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Thank you.

• Cannot see other computers on my workgroup

  I wiped my computer "arizonahp" and did a fresh install of Windows 7 Ultimate 64 bit.  Everything works fine except that it cannot see other computers on my working group (all current running xp) and they know more see 'arizonahp '.  I clear my name of working group "yorklan" in my computer.  Previously, arizonahp was a vista machine and he could see and be seen.

  What could be the problem?
  Thank you
  Gary .net developer

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• cannot see/import format RW2 (Lumix GX7) in LR 5.7.1

  cannot see/handle RW2 format after the upgrade to LR 5.7.1. Work in LR 5.4 on my old PC. Pictures of the Panasonic Lumix GX7. PC running windows 7. Any idea what is the problem?

  LR 5.7.1 is December 2014.  You need a version of LR newer than when a camera was released for sale in a country than Adobe tests cameras in, usually to the United States, I think.

• cannot see the bengali fonts correctly in a Web page.

  Presenty using Windows 10 and Firefox 41.0b5. Cannot see the Bengali fonts correctly in any Web page, but the edge or the Internet Explorer can display Bengali fonts nicely.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

  Hi all

  Newbie on this forum. I just bought the i5 8 GB of RAM Windows 8.1 Kira Ultrabook, a great little machine.

  I have a SanDisk 64 GB flash drive that has about 20 GB on it in a dozen files. These folders and the content can be seen by my Windows 7 PC, even my mobile phone and Tablet Tower.

  However, the Kira cannot see both files, even if in the properties of the drive, he sees the space correctly. Turned on all folders and no difference.
  My wife has a 32 GB flash - no problem.

  I reformatted the flash disk, run a virus on the disk and the Kira. The Kira can someone verify the maximum size flash can see it please? I can't find it in any documentation.

  Any help or suggestions appreciated - I ran support Toshiba without a response, so maybe someone here can help you.

  Mark
  Brisbane Australia

  The appearance of the folder is not in your laptop model or your system!

  I recommend you to check some common view windows Explorer settings:

  (1) to see the hidden files and folders reported as
  Click the view tab, and then click Show hidden files and folders.

  (2) to display all the system files that are usually hidden from view.
  Click on the view tab, and then clear the Hide protected operating system files check box.

  Here you will find all the information about the folder views and behavior
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

• Cannot transfer pictures for MacBook phone Virgin Mobile... Please help!

  Please tell me how to transfer photos from MacBookAir at a cheap Virgin Mobile phone... tried several times and nothing happens.  Is this possible?  Thank you!

  have tried several times and nothing happens

  With the amount of information you provided that it is impossible to offer a solution.  We cannot see your computer so we need to know the details of your problem and the configuration, i.e.:

  • What system version are you running?
  • What version of Photos do you use?
  • How have you tired to transfer, what methods?
  • who is the manufacture of phone?