Memory Diagnostic tool

Similar Questions

• Closed during the operation "memory diagnostic tool"

  Using WINDOWS Vista HOME PREMIUM.

  When I run the 'memory diagnostic tool' the computer stops half way through the process.

  He stops at a different % of how the process every time.

  It also stops when I make a video file.

  The rest of the time it works OK.

  Can you suggest a reason or solution for this?

  Maybe it's overheating when you perform CPU intensive tasks. Check the dust accumulated around fans and heat sinks. A can of compressed gas can be used to remove items.

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• Windows memory diagnostic tools does not work

  Why doesn't windows memory diagnostic tools?

  www.memtest.org . for a free bootable memory testing utility

• Windows memory diagnostic tool does not work well

  Hello
  I have memory problem in vista, but I run the application above it works well, but after completion of this test and the PC is automatically restart, 1 - I don't see the icon of results on the taskbar. 2- Also, I don't see any action on event viewer

  does anyone have simillar problem or solution?

  (I suspect all lenovo neutralization process)

  Hi remi,.

  your solution was close but seems I have 3 m total asymmetrical memory, when I took 1 stick (Hyundai 1024 M) memory test took place with the display of the icon tray + report EV.

• Diagnostic tool memory stops near 40%

  I tied to run my Windows vista memory diagnostic tool and stop about 40%. What's wrong?

  Hello

  1. don't you make changes to the system before the show?

  2. where you try to run the memory diagnostic tool?

  Try the step mentioned in the link below and check if that helps the issue.

  Step: Check memory problems in Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If the diagnostic tool memory stops running or stops, we can try to change the RAM sticks. Could be a faulty RAM.

  Post back with the State.

• Memory will not work Diagnostic tool - black screen

  Hello

  I'm having a problem with my (relatively) new - an ASUS laptop UX - 21F. It worked very well for the first three months, but only in the last week has crashed several times on me with a BSOD. Unfortunately, Windows (Win7 Ultimate) does not create the memory dump file as it is currently specified to do so. (Yes, I checked, double-checked and rechecked re this parameter.) It simply does not create the image file.) Looking back through the event log, it does not match what is happening just before failure. It seems to be random.
  It sounded like a potential RAM for me, so I thought I'd run the Windows Memory Diagnostic tool. I chose restart immediately and... nothing. It restarts, messages and then it is a black screen and high enough system fan wind rising and the system gets hot enough. There is no cursor, or anything like that, and the only thing we can do is to hit the power button (it instantly stops, rather than having to four seconds). When it restarts, the system boots normally into windows.
  I tried to access the tool in many different ways and there seems to be no way to enforce. Each way I just get a black screen and a hot computer.
  What should I do here? I do a lot of development on this machine and I'm kind of falling ill to endorse things up to four times a day in case it crashes and I lose my job. Should I reinstall the OS and see if the problems go away? Or is there something less invasive than I do?

  Download and create the CD to boot from here:

  Memtest86 + http://www.memtest.org/

  If you have more than one piece of RAM in it, blow an and boot from the CD. If there are no errors, swap out with another room and boot on the CD again.

  Look in the event log at the time of the accident and see what are the entries for error there. This might give you a clue as to what is happening.

  Is the ' (relatively) new laptop "still under warranty by any chance? If so, you should also contact ASUS or the place you bought it from.

  SC Tom

• Satellite L40 - 14F: the Memory Diagnostics tool has problems with my hardware

  Hello!
  I have Toshiba Satellite L40 equipped 14F of Windows Vista.
  I did a memory test using memory diagnostic tool, bulid in Vista, because these last two weeks, I had two times a blue screen.

  Diagnostic tools noted memory problems with my hardware.
  Now what?

  My laptop is new, I bought it on 28.12.2007.

  If you have problems with your hardware then don t waste any time and contact huh ASP in your country for a control.
  If there are a few problems with the equipment the warranty should cover everything.

  Good luck

• Memory test tool

  Using my Vista 64-bit dvd recovery tools section I ran the test of memory. When the computer reboots, it went through the test, but at the end it starts just the test everywhere after the third time I restarted the pc, he went to the same point and started again the memory test, I checked the settings and the memory test is configured to only run two times but he wears only whenever he finnishes it again. Can someone tell me how to stop it?

  Hello
   
  Have you successfully completed the diagnostic test memory over WinRE (Windows Recovery Environment)?
  What was the result of the analysis?
   
  Start the scan memory as an administrator.
  1. click on start, type memory diagnostics tool in the search for text box, right-click on it and click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on restart now and check for problems or check the problems the next time I start my computer.
   
  Understand the results of the Diagnostic tool memory:
  If memory diagnostics tool ends the first pass and no error, your RAM is working no doubt. You can still run the diagnostic tool memory several times using the same settings to ensure that the Diagnostic tool memory cannot find any errors with your RAM. If you want to test your RAM more completely, you can run the test suite expanded by pressing T during the Memory Diagnostic tool is running. You should run for several hours and then Memory Diagnostic tool. Also, if you change the sequence of tests or one of the parameters of the Memory Diagnostic tool, the current test pass restarts.
   
  If the Memory Diagnostics tool detects errors that occur in your RAM, the screen is updated with information about the error. A "Fail" result for a test indicates this particular test has detected an error. If a test fails, your computer has for lack of material.
   
  If the memory diagnostics tool detects errors in your hardware, you must correct the errors and rerun the Diagnostic tool memory until no errors are reported. Then, you try to run Windows again. If you do not, it may be that Windows does not work properly.
   
  You can try to identify individuals without component of memory. However, if errors are found and that your computer is under warranty, we recommend that you contact the manufacturer for troubleshooting.
   
  Memory diagnostic tool information: http://windows.microsoft.com/en-us/windows-vista/How-do-I-know-if-my-computer-has-a-memory-problem
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Diagnostic tool hardware problems on Satellite has detected memory

  Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

  Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

  Is that what this has to do anything with overheating?
  Please help me immediately

  > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

  I would assume memory one or two failures of modules.
  I recommend you to check them both.

  Remove a module and try to use the laptop with a connected module.
  Then another module test. Make it as different memory locations.

  If two modules are corrupt, then you will need to replace both.

• Windows Memory diagnostic of hangman to halfway...

  Using Vista Home premium SP1, computer laptop lenovo Y430

  during the analysis of the diagnostic memory tool he successfully scan first part but hung on the second part @ 25%. Tried using the ESC key no response... After a while you press the power/button switch and he died.

  Was able to start again without any problems. However, when access some admin like computer Mgmt tools > service and application > an error msg appears and forces me to close.

  After the start, I scanned the two disk (C, D), no errors/bad sector, defragmentation = ok, ok = Sys file checker.

  I don't know smething wrong, someone at - it ideas?

  the error msg (WMI)

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  TKS.

  Since you memory diagnostic failed which may tend to indicate a memory problem.

  www.memtest.org has a free bootable memory utility test

• How can I know what that found Windows memory diagnostic?

  There is a small box that says.

  "your computer has a memory problem" "memory problems can cause the computer lose information or stop working." To identify and fix the problem contact the manufacturer of the computer "."

  Y at - it somewhere I can look and see what she got?

  I had all kinds of problems such as, blue screen memory dump, google chrome aw snap crash a lot, I was playing a game and it crashed to the desktop, so I couldn't run all the programs with reformulating them the computer, the computer no longer meets the Middle Windows up to date.

  When these problems started I thought ok I have this Windows 7-64 bit running for 3 years so I have re installed every thing and the same thing happened, I did it again but this time I used my XP disk to do the long format, it took 6 hours to do the 2 to hard drive if there are viruses that should have killed them and the reader should be as close to new as I can get it, but I still have the same problems.

  I ran scan disk, no problem, right now my CPU usage is 6%, RAM is 1.78 GB used out of 8 GB on the Task Manager.

  My computer performance scores are

  Processor 7.2

  7.4 RAM memory

  Chart 7.4

  7.4 games graphics

  Hard disk 5.9

  It says I have a memory problem, but I've never seen more than about 2.8 GB of RAM being used I think that my motherboard is wrong something to do with the LAN of the jury party because all the problems seem to have something to do with the internet, but I would like to know what she has in case it's the hard drive and not the Mo before as I have spend a lot of money on the bad parts.

  I have try ed out the RAM and put back in, run the test, but did not so bad yet lucky, so I took the RAM on another PC and TA-DA! She has passed the test and everything works now no more of accidents.

  It would have been nice if she was 'Diagnostic memory Windows (RAM)' instead of memory diagnostic Windows user so first like me knows just what memory it is testing, I found by chance and didn't know what it was.

  So if your browser blocks a lot especially google chrome "AW snap" crash and accident of programs on desktop to run this tool, it could be your RAM.

  I hope this may help others.

• PC Diagnostic tool does not

  Hello world

  I have a satellite M30, and the 'PC Diagnostic tool' utility does not work (nothing happens when I click on the program). I have windows XP service pack 1.

  I uninstalled and downloaded a new site of toshiba, but it still does not work.

  Nobody knows why and how I can solve this problem.

  Thanks in advance for any response.

  And HAPPY NEW YEAR

  Hello

  How do you start the PC Diagnostic tool? Start - PROGRAMS-... or with a shortcut on the desktop?

  Check the shortcut of your link? Click with the right button of the mouse on it, go to properties and check the location of the main file.

  Also, you should check in the C:\programs addressing Explorer PC diagnostics is installed! If you foud it try to start from this destination!

  Try and keep me posted!

  Sam

• PC diagnostic tool does not not on Satellite Pro L300

  When I try to run the utility Toshiba pcdiag.exe I get an error message.

  The details of this message say that the 'fault Module name is KERNEL32.dll.

  I uninstalled the utility programs original and downloaded the files updated on the Toshiba site, with the same result - I always get an error message.

  This fix is there for that?

  Thanks in advance for your suggestions.

  Hello

  Are you using Vista or Win XP OS?

  I checked the page European driver of Toshiba and the PC Diagnostic tool has been published only for Win XP.

  I think that might have something to do with your Windows operating system installed.
  All first as you should check if the PC Diagnostic tool is compatible with your operating system and secondly, you must update the OS before install you this tool.

  Good bye

• Directed here to find a diagnostic tool of performance cooling for my X 205.

  Hello

  I was looking for a software to monitor and control the fans in my X 205. I have an overheating problem when the games. The vents are clear, and I opened the case and he cleaned. The ventilation openings are not blocked. This problem occurred recently. I assumed it was a problem with XP get corrupted, so I reinstalled XP Pro. This did not help. The fan itself works, as I ran it on 5 volts when I opened the file. No problems. He justy lights when the GPU gets hot (75 degrees Celsius).

  A laptop forum referred me to this site and said: I'm looking for a utility called 'Cooling Performance Diagnostic tool', but I can't find anything.

  Anyone know where I can download this utility? I need to monitor and control these fans. I reinstalled the drivers from the Toshiba site and system Toshiba Utilities, but the fan does not seem to be controlled.

  Anyone got any opinions on this one?

  See you soon,.

  Rob

  As far as I know these tools does not exist.
  Maybe someone told you to check in Toshiba power saver settings for cooling method option.

  In any case, I assume you have the laptop model US so I have to redirect you once again. ;)
  Check Toshiba support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp US and look for information on all available tools and utilities.
  You can also visit the forum there, and chat with people who have models of laptop computers in the United States.
  On this page we are discussing in most cases on the European models and the support of Europe.