envy dv7: need to change the boot sequence in the BIOS

Similar Questions

• USE FIREFOX WITH ENVY 5530 - NEED TO CHANGE THE PRINT SIZE OF LABELS

  PRINTING LABELS WITH ENVY 5530 IS FAR TOO SMALL. WINDOWS. I USE FIREFOX. HELPS TO PRINT ON LABELS BIGGER

  Hello

  For Firefox, please

  b click on print, you can see preview before printing

  (b) on the top, you can see scale (near Middle), you can increase or decrease in % to get the right size

  Kind regards.

• How to change the BIOS settings to read the Norton CD?

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

  1. the computer starts from the CD and you can follow all instructions you have Symantec.

  2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

  3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

  You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

• Satellite 2060cds: what I need to do to change the BIOS settings?

  I need help.
  I installed Windows XP Home, and now I can not access the toshiba hwsetup software, to change the password or other settings of the bios.
  What should I do to change the bios settings?

  Thanks for your help.

  Hi Paulo,

  Normal access to the BIOS Setup is by pressing F2 during the initial power of sequence.

  Kind regards

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• need to change the language to English - United Kingdom for English - United States

  Just upgraded to FF 7.0.1 and now change appears in the form of books. Need to change the language to English - United Kingdom for English - United States.

  Thank you

  Dennis

  You can check the order of the installed languages:

  • Tools > Options > content > languages > choose

• Re: I need to change the CD/DVD drive in my Satellite Pro P200

  Hello

  I need to change the unit of DVD - RW in my Satellite Pro P200, but I 'don't know remove the old unit.

  Someone help me?

  Thank you.

  (Sorry for my English: S).

  Hello

  I advise you to visit this side:

  http://www.irisvista.com/tech/

  Note, if you don't find your model, you can see for others, who may be similar. 1 last thing, remove the battery and use gloves for protection (due to static), be careful with the holders of hidden

  Good luck!

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)

• Satellite Pro A60. I need to change the cd/dvd drive

  I am a complete "newbie" to this kind of help is welcome. I need to change the cd/dvd drive the current one is as good as a horse rocker with a broken leg! I also need to buy one that won't break the Bank.
  Thanks in advance.
  Countryman

  Hello

  You will need a compatible CD/DVD player.
  Not all readers are supported due to different master/slave/c-salt settings.
  ODD, that uses wrong settings will not be recognized by the BIOS.

  You can buy a compatible player to a Toshiba ASP in your country.
  You can also consult your user manual.
  In my manual, I could find some information on the compatible sides

• Computer laptop need to change the HDD in the SDS?

  Have 3 questions related to the Toshiba SSD!
  1. what laptop need to change the HDD in the SDS?
  ATA, http://www.toshiba.com/taec/adinfo/ssdfacts/ so 1.8 and 2.5, I look at who is the same dimenssions and right?

  2. I have this model Toshiba R200-S2031, is it possible to change drive HARD 80-SSD 256 1.8 inches? I understand that my model has 1.8 IDE I can't take 2.5? But replace IDE ATA is possible that they are the same size?

  3. If I R500 with 64 SSD drive, can I replace it it with greater SDS and the same size of thumb? Let's say I have 2.5 64 GB SSD ich so I could replace it with 500 GB SSD?

  tnaks for answers.
  and Toshiba - thanks to make small laptops, really enjoy.
  you want to update faster, but I LIKE THEM!
  Thanks Toshiba!

  Husbands

  (1) as a general rule, all laptops can be upgraded to an SSD. If the connector on the SSD is the same as the original hard drive connector, it should work.

  (2) I believe there are 1.8 "PATA SSD available, google is your friend.

  (3) I think the R500 is using a connector ZIFF customized for the SSD drive, then you will not be able to install a standard SATA or PATA 2.5 "SSD Drive. I don't know if you can buy SSDS with the connector ZIFF, once again, google can help you.

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

• I need to change the note/endnote.

  I write my RESUME, and I have a large number of appendages, that I have to put in the body of the text.

  I tried to do in the pages and the best option is to use an endnote, but I need to change the Exhibitor in order to appear ' doc 1 ' ' doc 2 '' ' doc 3 "" doc 4 "instead of"1""2"'3' '4' only." ""»

  Is this possible?

  Y at - it another option in addition to the note?

  Thank you

  No one who wants to get hired puts notes/endnotes in their curriculum vitae. If you do this, you write a report, not a professional CV, which should be in a concise and standardized format (mainly for the very picky, the applicant tracking software). I suggest that you omit the end notes/notes and do research on what constitutes a professional cover letter and resume writing for your job sector target.

• Apple need to change the title of we are here in support we are here to listen to

  Apple need to change the title of we are here in support we are here to listen to

  Say to Apple.

  https://www.Apple.com/support/feedback/

• Need to change the palette display function

  Hello!

  I looked through the options, but don't not found how to do function pallet to be able open Subvi cumstom location. I have attached two photos - it displays what I and the second picture shows what I want.

  PS: I have LabView 7.1

  Oh, OK. Your photos have been somewhat misleading. I thought you wanted to just have the names of the categories. If you want to include a pallet to your own record, you need to change the palette as already mentioned. The Help of LabVIEW describes how to proceed. It is in the LabVIEW environment-> section of customizing your work environment.

• I need to change the DHCP Pool to the LIST of 'DECLINE' for WINDOWS 2003R2

  Applies to: Windows | Windows 7 | Security, privacy, and user accounts
  I need to change the DHCP Pool to the LIST of 'DECLINE' for WINDOWS 2003R2 - I am unable to view the file named MACLIST.txt in C:\windows\system32, even if the file system is open and I am the administrator with full user rights. I see this file name in the REGEDIT, but cannot display to open it and place it in the MAC addresses I want to REFUSE in the server pool. The operating system is Windows Server 2003R2 Standard - SP 2

  Please help

  PRyan

  Hi SummaCorp,

  Thanks for posting your question in the Microsoft answers Forum.  If you have questions about Windows Server 2003, please visit the Windows Server Community.