OSPF and balancing

Similar Questions

• Very Urgent how responsibilities should restrict access to specific accounting and balancing of the segments.

  Hi all

  In fact I want to limit the new responsibilities for books and balancing of specific Segments. How can I achieve this. Pls Help Me.

  Thanks and greetings

  Sudhir

  BSV can be limited by safety rules.

  great books can be restricted through assigning profile GL options: book name, MO: operation unit & MO: security profile.

• The financial accounts and balance, recurring balance, Data Types and type

  Hi one can me claire for the following?
  
  1. in HFM account Types, we can find balance and Balance of what it means? is it completely related to finance and accounts topics? If yes give me some good examples of
  
  understand in what concerns to HFM where this need will come from?
  
  2. What are the financial accounts that we use in HFM? do we use to load? If yes what is the format, like Excel or data form?
  
  3. What is the number of head? what his purpose in what concerns the HFM? in what situations we must think and remind about it, means in making the activity which HFM we can understand
  
  on this subject simply?

  (1) balance and Balance recurring contain data that is not from one period to the other accumulated and are not translated. Effective is typically a balance, such as Square Footage, to provide information to real estate, for example.

  (2) non-financial accounts are usually those who are not focused on the currency, such as the staff, units sold, the number of customers, days sales outstanding, numbers fo new customers, etc. These data entry can be no other data is loaded,-either directly by loading in HFM, through forms, grids, reviews, smart view or FDM, among others that I am sure.

  (3) effective is often a metric for growth. It is often used in reports, such as revenue or margin by staff. Even if you buy a company, remains a ratio between revenue and the staff, so it's a good measure for organic and acquired growth.

  -Chris

• PIX / ASA - OSPF load balancing

  Hello

  I read the balance a route via OSPF equal cost load the PIX. It will send packages via per package, or is there another method for distibuting the traffic to the break following equal cost?

  Thank you!!

  Lee

  Hello Lawrence,.

  PIX 6.3 now supports the NLB using OSPF only (up to 3 default routes)

  The PIX can receive up to 3 doors by default (all the same metric) 3 different routes of entry, and

  balance the load on a per destination basis. Currently, there is no way the PIX to

  determine which carries a package will be sent to. You cannot currently use static routes

  for load balancing.

  The used hash algorithm is not simple, it is very difficult to determine which

  Route (next hop) a package will be given an IP Source and Destination pair. Basically,.

  the PIX takes the source and destination IPs (two 32-bit numbers) and axe in one

  16-bit unique number. Then the number of 16-bit (0x0000 - 0xFFFF) is divided into thirds.

  The first 1/3 goes to the door of entry 1, the next 1/3 goes to the door of entry 2, and the last 1/3 goes to

  Gateway 3.

  I hope this helps! If Yes, please rate.

  Thank you

• Satellite L850-147 - Audio problem with output jack and balance

  Hi all

  When I plug in my headset on my laptop (Satellite L850-147) and try to listen to music, I hear music (instrumental parts)... by far, I can hear the voice of the singer.

  I found a turnaround with the adjustment of balance in realtek HD audio manager 100% or 100% left...
  But this isn't the way that music have to play...

  I have reinstalled the Realtek HD Audio Manager but without success...
  Any idea?

  Thank you

  Hello

  And have you checked the settings in the software you use to play the sounds?
  Of course the Realtek HD audio Manager supports the sound configurations and you can change different sound effects such as environment and Equalizer but the same or similar options are supported by each software reading and I also recommend to check this!

  By the way: Toshiba laptops are pre-installed with a HD Audio SRS Premium application. To access this, go to:
  Start-> all programs-> SRS Lams-> SRS Premium Sound Technology
  Here, you will also get some options that could be interesting for you.

  Also recommend checking Audio improve
  Make a right click on the icon of speakers in the taskbar then on playback-> speakers devices->, click Properties
  On the development tab, select the sound effect you want and click on apply.

• Redistribution of Routes between OSPF and EIGRP

  We have a network of test with the topology below.  We have two networks connected to a L3 switch.  Both networks have an ASA firewall with a tunnel from site to site between them.  They also have a connection in conjunction with each other.  We want to implement a scenerio where the concert connection is the main route but if that route fails, then it switches to the routethat is above the tunnel from site to site.  We have eigrp running on two basic switches so that the roads on the concert connection function properly.  However Networking cannot be learned on the second road that goes over the vpn tunnel.  We have running ospf on the asa and we are redistrubuting routes in eigrp.  Which apparently correct?  Look like the SAA they learn on ospf routes correctly however when we go to basic switches and show ip eigrp topology we do not see the routes possible successor.  Any ideas on how to make this work?

  

  Hello

  The initial Setup looks that you have summarized automatic enabled on core switches, also to the asa eigrp process your redistribution measures doesn't look right about the delay/load/reliability-whats the reasoning behind this? Could you try the following:

  Switch main 1 & 2

  Router eigrp 100

  No Auto-resume

  ASA 1 & 2

  Router eigrp 100

  Redistribute ospf 1 100000 1 255 1 1500 metric

  Could you also post the out-of - show ip eigrp topology all-links

  RES

  Paul

  Please do not forget to note all messages that have been useful.

  Thank you.

• OSPF load balancing

  Hello

  Does anyone know how to deploy load balancing in OSPF area 0?

  Any suggestion for documentation would be apreciated.

  Thanks in advance for your help

  Hello

  OSPF is only the equal cost load balancing, so you must have two channels with equal to the destination charges.

  This command must also be set to more than one:

  maximum-paths

  under router ospf configuration.

  I think you also need ip cef enabled.

  See this link for more information:

  http://www.Cisco.com/warp/public/105/loadbal_cef.html#beforecef

  Aaron

  Hope that this help - remember to note messages :-)

• OSPF and redundancy

  Hi, I'm studying for my CCNA exam and using tracers package I designed a network such as configured below. OSPF works well sense that I can ping all devices from any network. However, if I remove a serial interface in any router, there is no failover (redundancy) which means I can't ping all devices more. OSPF does not redundancy? My setup is false? Help, please. Thank you

  Anil
  Trinidad and Tobago

  ROUTER1

  interface GigabitEthernet0/1
  IP 192.168.1.1 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/2
  no ip address
  automatic duplex
  automatic speed
  Shutdown
  !
  interface Serial0/0/0
  10.1.3.2 IP address 255.255.255.0
  !
  interface Serial0/0/1
  10.1.1.1 IP address 255.255.255.0
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  router ospf 1
  Log-adjacency-changes
  network 192.168.1.1 0.0.0.0 area 1
  10.1.1.1 to network 0.0.0.0 area 1
  10.1.3.4 network 0.0.0.0 area 1

  ROUTER2

  interface GigabitEthernet0/1
  10.1.4.1 IP address 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/2
  no ip address
  automatic duplex
  automatic speed
  Shutdown
  !
  interface Serial0/0/0
  10.1.3.1 IP address 255.255.255.0
  !
  interface Serial0/0/1
  10.1.2.2 IP address 255.255.255.0
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  router ospf 1
  Log-adjacency-changes
  10.1.4.1 network 0.0.0.0 area 1
  10.1.3.1 network 0.0.0.0 area 1
  10.1.2.2 network 0.0.0.0 area 1

  Router3

  interface GigabitEthernet0/1
  IP 172.16.110.1 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/2
  no ip address
  automatic duplex
  automatic speed
  Shutdown
  !
  interface Serial0/0/0
  IP 10.1.1.2 255.255.255.0
  !
  interface Serial0/0/1
  10.1.2.1 IP address 255.255.255.0
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  router ospf 1
  Log-adjacency-changes
  network 172.16.110.1 0.0.0.0 area 1
  Network 10.1.1.2 0.0.0.0 area 1
  10.1.2.1 network 0.0.0.0 area 1

  Hello

  On Router 1 to correct the network return 10.1.3.4 0.0.0.0 area 1 network 10.1.3.2 0.0.0.0 area 1.

  Cordially. Aref.

• Scan the number of listeners and balancing the result

  Hello

  within the analysis of the docs 3 listeners are usually qualified.

  But is it accurate to say that with this configuration, only 2 node RAC, you normally an asymmetric cluster and a single node with two connections on the other?

  Because if you use Robin DNS, you will get 2/3 of the resolutions at a node (the one who got two of the IPs associated 3 related) and 1/3 to the other.

  So in the case of 2 knots, would it be better to have only 2 scan listeners, or define a 4th one finally?

  Thank you

  Gianluca

  It is not an asymmetric cluster, scan listeners will only lead the incoming request to the listener node of the instance with a lesser charge.

  All headphones scan will have all instances clustered registered with it and therefore every listener know which node the connection request must be sent to balance the load.

  Even in the case of a 10-node cluster, 3 listeners scan would be sufficient, it is not necessary to have listener ongoing scan of running on each node to send connections to that node.

  http://www.Oracle.com/technetwork/products/Clustering/overview/scan-129069.PDF

• Periodic reviews with the impact in the flow accounts and balance

  Hello
  
  We want to get reviewed in HFM regularly (zero adjustments to the periodical view). This will allow a review last 1 month to influence for all the months in terms of CDA.
  
  The question that arises is as follows:
  -There are a few magazines who have one leg of the flow and the other leg in the accounts of type balance.
  
  - So a good figure for one YEAR for the DEBIT account, but the account balance is not the impact as well as balance SHEET accounts don't wear en the frm of adjustments of the previous months as FLOW accounts in the following months, we
  -This causes an imbalance in the balance of this measure.
  
  
  PPL know about this problem and how they can be sorted.
  
  To address this, we have made all adjustments CDA and poster of subscription sheets. But it creates a lot of reviews that will be displayed and is not an optimal solution.

  Yes that's correct.

  Varun

• Orientation page and balance are grayed out when I "print booklet" as a PS file

  I'm using CS5 (it's old, but it doesn't have me given all the problems yet) and running OS Mavericks.

  I need to print and bind a 10x13cm book that I'm working on.

  The book will be bound in the sections of 16 pages, then m goal is to produce a PDF for each section of book 16 pages.

  Each PDF page will consist of the two places "spreads" impression (i.e., pages 1-16, then 15-2, then 3-14, etc.)

  As the book is smaller than the A6, I can hold each Board on a page of A4 format, printed as 'landscape' orientation
  

  
  

  I will then send this PDF to someone who will then print on a laser printer double sides on A4 sheets.

  I'll fold, bind and cut out the resulting pages and make a model.

  My problem is the following:

  > I go to "Print booklet" and select "2-top shot on horseback" (gives me the page layout, I need)

  > I click on 'Printer setup' and select "PostScript file" from the drop-down list (I will then distill the PS file)

  However, when I go to installation, orientation and position of the page are all grayed out.

  Therefore, when I print and distill the file in PS it is sitting at the bottom left of a sheet of 'portrait' (not centered on the sheet)

  You know another way to get around this?

  If I print directly to my inkjet, then I can control all the centering, etc., but as I need to create a PDF file to send to someone else, it is not much help.

  Any help would be appreciated!

  If you bind in 16 sections of page, you must choose 2-upper bound and specify 16 page signatures. Stitching horse assumes that all the pages are folded together in a single section.

  For the options on the page, you must install and use the ADPDF9. PPD file. You can download it from my drop box on download - Hightail

• How can I solve the problem of a pop window that appears whenever firefix titled load [Javascript Application] and said: "balance.balance is undefined".

  The little ' [Javascript Application] and balance.balance is not defined ' pop-up window is followed by a pop up that shows a sign of prudence and the number 3. They repeatedly pop up when I click on the button OK or X, I have to click 10 times until they disappear. Then, Firefox seems to work normally until I exit and try to come back later to Firefox.
  I uninstalled Firefox and reinstalled without effect. I also ran a convenience store that seemed to refer to distance to this problem with no effect.
  This does not happen when I load Internet Explorer or Google Chrome. Except for this issue, I prefer Firefox over one or the other.

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, probably an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Can this load balance and HA cluster with vsphere?

  Hello community!

  Really new on this type of subject, so forgive me if IAM iam do or say something wrong. I'm here to try to understand better this amazing tool so I apreciate your time and knowlodge!
  Im trying to create a failover and balancing cluster with Vsphere, the goal is try to install an MSSQL DB server where the customer can access more quickly and do not have downtime when a node is down.

  I read a lot but still I can't have a full understand abt, so if anyone tries to explain something, please be patient and explain with precision.

  All doing wrong if you really work at home as a LABORATORY, and I can do it, hurt trying to use it to get a job because I don't have and I really need one soon!
  Here is my diagram is possible?

  

  Well ill to explain it, I have clients that will send a work for my DB load process, which will affect on MSSQL Server installed on the 12 TB logical drive created from the union of all methods virtual storage. Each virtual storage is just a virtual disk created on a virtual machine that is hosted on the physical server (node).

  So I have 4 physical server which have 1 VM each with 3 TB of virtual disk, the goal is the customer can send the process of workload on 4 nodes to have a quicker response, and if a single node fails for any reason, the other node can operate withow problem.

  physical server Medley: don't know yet if I have to use one or install VMWARE directly.

  Sagna VM: Windows Server 2008 (don't know if necessary or if I can just install SQL Server directly)

  MSSQL Server VM: 2008 Enterprise (still don't know if I have to use this one)

  Well I can't think right now on the other details, but if you tell me ill be happy to write it.

  Sorry if my writing or semantics is false but English is not my first language.

  Really thanks to get to this point and share your knowlodge!

  Best regards, josh of Argentina!

  Josh, please correct me if I'm wrong, you have 4 knots of MS - SQL, and you need to read/write at the same time in a shared database of 12 to.

  If this is the case check the following documents:

  VMware KB: MSCS support improvements in vSphere 5.5

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004617

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1034165

  Clustering using VMDK sharing between virtual machines

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2009226

  https://www.VMware.com/PDF/vsphere5/R55/vSphere-55-configuration-maximums.PDF

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2003813

  The above covers the part of the diagram which includes 4 nodes SQL and the shared database, the other part of the client to the SQL nodes that segments the loads on the nodes, I think you should see Microsoft options.

  I found a few relevant links below:

  https://ask.SQLServerCentral.com/questions/51824/cluster-with-more-than-2-nodes.htm l

  SQL server 2008 r2: how? Several active node SQL Cluster (not) - database to stack Exchange administrators

• Hiding the balance and the payroll

  Hi all
  Version of the EBS: 11.5.10
  
  If a balance adjustment is done in March 2011, then he is not let me to run quickpay now (Jan 2012) even if the date is set for June 2011. He complains that there is some future missions pending.
  We can run a fast compensation for the month of March 2011 in now?
  
  Please suggest.
  Thank you
  Chavigny.

  The process is the same as any term payroll, Express
  Data are.
  pay_payroll_actions
  pay_assignment_actions
  PAY_RUN_RESULTS
  PAY_RUN_RESULT_VALUES

  And balances see the tables above to get the value.
  See the following tables - for a Sql for a balance
  pay_balance_types
  pay_balance_dimensions
  pay_defined_balances
  ff_database_items
  ff_user_entities
  ff_routes

  see you soon,
  VB

• payment methods and cancellation?

  Hello!

  Please, can someone explain this to me.

  I plugged my mastercard prepaid card to itunes. I didn't buy a single, but on my bank statement application, there are two elements:

  iTunes.com/Bill - payment with prepaid card

  and

  iTunes.com/Bill-cancellation-payment with prepaid card.

  they take $ 1 (bit more) and returned.

  the only thing that I guess they are a few card health check and balance. as paypal do after the first entry.

  I'm wrong, or some glitch that happened?

  Thanks in advance!

  Vanja.Krk

  That's how companies to check if the information provided is accurate. He called a shim and is quite normal.

  Any payment holds card authorization in the iTunes Store - Apple Support