other colors on future devices

Similar Questions

• How to add other colors in graphics

  Hey,.

  whenever I have create a graph, all my data is assigned a color of a group of only 6 colors. If I have more than 6 entries, the colors are repeated simply as

  red green blue yellow orange purple red green blue yellow purple orange and so on.

  How to assign other colors, or better yet, have it use a larger group/color scheme to mark data entries?

  Hi matanram,

  I don't see a way to increase or change the default colors.

  You can add new colors to each series after you create the chart.

  In this example, each category is a series.

  Open the window of color (shift control c is going to switch this on and outside window).

  Select a series (click on the graph and then click a series).

  Drag a new color to this series.

  

  Save as a template for the next set of data.

  Kind regards

  Ian.

• Lenovo - other hardware - Lenovo PM Device (1010ko)

  Hello

  My product:

  Lenovo X 1 carbon (A 20, 7)

  8.1 Windows 64 bit

  Microsoft offers me this update:

  Lenovo - other hardware - Lenovo PM Device (1010ko)

  What is this update and should it be installed?

  Thank you

  It's said like knihT power management driver.

  Personally, I prefer to use the versions of their proprietary drivers Lenovo. You can find it here:
  http://support.Lenovo.com/ca/en/downloads/ds032258

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• USB6363 DAQmx (reading and writing) calendar seems slower than other similar USB DAQ devices

  Hey people,

  I have currently a service waiting number with OR the subject, but I thought I'd post up incase anyone has ever dealt with a similar question pertaining to USB DAQ hardware.

  Try to understand why there is a difference of synchronization between the 6363 USB and some of the other less expensive USB devices like the 6525 or 6501.

  

  It's a watered the actual code that my team has noticed this difference in the simplified version.  The actual code is a reading analog daqmx (it's triggered hw, so we begin the task of analog playback, trigger, wait the time we acquire to and then run reading daqmx. who takes 6 ms to read a single 50 values of the buffer).

  Thank you

  -Pat

  Hi Pat,

  Try benchmarking of HAVE it read that way (with the wait timed by the software, it seems to me that the task is probably not yet made to the time you want to read - I guess that the question is relative between the event of the task performed and all the data is available in the DAQmx buffer, I don't have a series of X USB to see) :

  

  Try benchmarking your writing clocked by the software in this way (there no reason to include the check/reserve/validation/start sequence in your writing of reference when the task can easily be launched during initialization of your program):

  

  On my PCIe X Series as the two cases take< 1="">

  Best regards

• Black ink cartridge made. R there are 3 other color cartridges in the printer. I would use them instead.

  Black ink cartridge made. R there are 3 other color cartridges in the printer. want to use them.

  Hello

  • What is the brand and model of the printer?

  I suggest you to contact the manufacturer of the printer for assistance.

• XP SP3 cannot remove Windows Update: ITE - other hardware - UMass Storage Device (330). Causes BSOD when connecting memory card reader.

  Ativa AT-52N13 card reader worked fine until I installed the update from the window: ITE-other hardware - UMass Storage Device (330).  As soon as the card reader is connected I get a BSOD: BAD_POOL_CALLER.  Windows stopped not to damage your computer.

  Stop: 0x000000C2, 0 x 00000007, 0x000000CD4, 0 x 02040001, 0x8996A808

  The update is not listed in Add / Remove programs.  I don't know which driver I should delete.   Ativa, Office Depot, does not list the drivers for this device on their website and have been zero help.  Cannot find how to remove this update of any resource of Microsoft.  Any help would be appreciated.

  Windows XP device drivers using beats BSOD
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_july09.mspx

  Tip: Only get required updated driver from the download page of the manufacturer of the computer or device, NEVER of Windows Update (i.e., hide driver updates available through Windows Update).

• EPSON STYLUS CX4800 print the image comes out blue instead of the other colors

  Original title: printer

  Each time, I printed the picture comes out blue instead of the other colors, I have only blue. If I want to print a photo of family is blue spell. What can I do I have an Epson STYLUS CX4800

  Hello

  1. What is the color of ink cartridge in the printer?

  2. the problem occurs only in print images?

  You can search the print settings in the printer tool and select the color according to the requirement. Also make sure that the cartridges are properly ventilated and locked.

  Epson Stylus CX4800 all-in-One Printer

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQ&OID=58606&prodoid=56291067&FOID=63653&cat=30961&SubCat=30963

  You can watch the frequent question on the Epson Stylus CX4800 printer:

  Epson Stylus CX4800 all-in-One Printer - FAQ

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQs&OID=58606&prodoid=56291067

  Alternatively, you can contact Epson for more assistance on the same:

   

  Welcome to Epson support

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes&expansion=1000000

  Hope this information helps. If you need help with Windows, just tell me and we will be happy to help you.

• Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  This looks strangely like the good old 'false monitor via Windows Update profile'. If the selector of color shows the cream when it should be white, that's all.

  We won't know until the OP comes back with more information and perhaps a screenshot, but in the meantime (since I'm away from my main system) I can try to locate my standard screenshot of one of the countless other threads I posted it that...

  ah, it's here (last posted barely two weeks in Lightroom):

  

• Can Photoshop knock out of white (or any other color) yet?

  Is there a simple way to knock out white (or any other color) in Photoshop CS5?

  It is difficult for me to imagine that at this time, is not an easy method to do what this plug-in allowed us to do more than a decade.

  Of course, now I can stop install this plug-in (initially created for PS on Win95).

  I'm not in good links.

  What do you mean by 'knock out '?  You try to make a partially transparent image?

  You can select parts of an image in Photoshop by a variety of different methods of Photoshop, ranges of colours to manuel lasso, and then either remove through a layer or add a layer mask to make these transparent regions.

  I used Photoshop for 16 + years now and don't have not found a need for a 3rd party plugin to help me make selections yet.

  -Christmas

• HP photosmart b010a: every time of other colors

  printer prints well when I do a color copy of scan (e.g.) scaning photo) but when I try to print from pc photo is amazing... .with lines or missing colors or a different color than a color.

  I did a lot of head cleaning before I understand that the nozzles are ok because on scan-copy of color photos are normally.

  This printer is not slot that can read usb or card

  I did uninstall and install the software again.

  Printer interacts with pc, Solution Center hp even works, I can do all the stuff like cleaning the heads, the diagnostic page or test page; sure, they'll show me that this printer prints all colors CMYK.

  WHAT CAN I DO?

  Hi @babisd,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print photos on your HP Photosmart all-in-One Printer - B010a. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  First of all, I want to clarify what features are on your printer.

  NOTE: Scanning will not help you determine if there is a print quality issue.

  Here is a brief description of printing, copying and scanning.

  • Printing: Is when you send a print from a computer or other device to be print on the paper.
  • Copy:, that's when you make a physical copy of a printed page.
  • Scanning:, that's when you make a digital copy of a printed page.

  Looks like you have a print quality problems. Follow the steps in this guide:

  • E-all-in-one printers HP Photosmart (B010a and B010b) - solving print quality problems

  You will notice that the document recommends that you print a report of quality printer and check the report for defects.

  • All segments are missing in your report?

  

  If the report is printed with defects, you may clean or replace the print head.

  If you have a faulty cartridge or print head, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then review the information of limited warranty for your supplies.

  If the printer is out of warranty, you would try a manual print head cleaning. Please use at your own discretion.

  • Manually clean the print head on the HP Officejet 6500 printer

  NOTE: printhead replacement games are available to support HP customer or authorized service providers.
  ATTENTION: Wait until you have a new available print head Assembly before you remove the ink cartridges. Do not leave the ink cartridges out of the printer longer than 30 minutes. Can result in damage to the printer and ink cartridges.

  If the report printed without defects, there is probably a problem with the driver of printing or the application.

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Try to make a copy of a photo on the printer.
  • You print the photo of what application? Try another application, like Windows Photo Viewer, etc.
  • Try to print a different photo.
  • Try to print a document in color.
  • What were the results?

  If you have completed all the above steps and your product still has a problem, service the product.
  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

  I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

  Hello

  
  You did changes to the computer before the show?

  Method 1:
  Try the steps in the link and check.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  Method 2:
  You can update the drivers on the manufacturer's Web site and check.
  See the link to update the driver:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658
  Manufacturer link:
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Method 3:
  Try the steps from the link and check if you are able to print.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Unable to connect to other Windows 7 network devices - 0 x 80070035 and 0X80004005 error codes

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Developed a playbook app need advice now on the targeting of future devices.

  Hello

  I managed to develop a playbook using FB 4.7 and 4.6 Flex application (AIR 3.1). I use the latest version of the SDK which is 2.1.0. So my question is,

  1-will my app do support version 2.1.0 + of the playbook? or lower versions too?

  2 - this application even support other devices QNX? If so, what are these devices (I see 4-5 devices in the form of additional device) and how can I do same app also runs on these platforms.

  3 - my app is an application of children where children will be able b create avatars, now the requirment of content generated by the user in the submission form has 4-5 questions and I don't know what to write here, please advice! as my application should not have any issue with "unethical content creation" because he welcome children, now I can't stop users to write something bad in hindi, validate the image...

  Thank you

  clozertou wrote:

  Hello

  I managed to develop a playbook using FB 4.7 and 4.6 Flex application (AIR 3.1). I use the latest version of the SDK which is 2.1.0. So my question is,

  1-will my app do support version 2.1.0 + of the playbook? or lower versions too?

  As long as you don't use any what 2.1.0 - specific API, it should work on 2.0.0. If she does well in the Office AIR runtime, it almost certainly works on the camera too. Note that most of the PlayBook users quickly improve their OS. There are very few people running older versions. See http://news.ebscer.com/2013/04/playbook-users-still-on-newest-os/

  2 - this application even support other devices QNX? If so, what are these devices (I see 4-5 devices in the form of additional device) and how can I do same app also runs on these platforms.

  You have to adapt your user interface, graphics, splash screens and icons to work on various resolutions and reports l / h. New appliances BB10 have 768 x 1280 and 720 x 720 pixels and a much higher density of pixel resolution. Buttons should be about twice the size (in pixels). Try to avoid the absolute positions coded hard & sizes and rely more on anchor and percentage sizes. More information can be found here.

  To test, you can configure your AIR runtime desktop to emulate different resolutions, or use the simulators. Or better yet, try to get a real device.

  The 'other' devices are the BlackBerry Z10, Q5, Q10 (consumer) and devices of Dev Alpha A/B/C (developer). The A10 of BlackBerry rumor may still have a different resolution.

  3 - my app is an application of children where children will be able b create avatars, now the requirment of content generated by the user in the submission form has 4-5 questions and I don't know what to write here, please advice! as my application should not have any issue with "unethical content creation" because he welcome children, now I can't stop users to write something bad in hindi, validate the image...

  Don't know about it. Perhaps ask this above in the forum of developers to the BB world.

• My Windows 7 computer is no more can detect the wired network, but all my other wireless and wireline devices connect very well. Replace the network card and no change.

  Hello!  This morning my Windows 7 (the motherboard Acer) desktop ceased to recognize the wired connection to its network card.  In other words, it shows kind of connection, but notes "no Internet access.  It connects to a surfboard by Motorola through one Ooma hub, although I encounter the same problem when I connect to the desktop directly to the surfboard.  All other devices Wi-wired and that connect to the surfboard are functioning properly.

  Thinking that the Realtek NIC on the motherboard Asus was the problem, I installed a new Trendnet network interface card in the PCI slot.  I disabled the network card to the motherboard via the BIOS settings.  No change.  Always 'no Internet access.

  Time Warner Cable test the modem from their office and said it was working properly.  I also connected a laptop directly to the surf board using the same cable, and he was able to connect to the internet.

  Can someone help me understand what the problem is?  Thank you!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat