other issues of masking

Similar Questions

• This is where other issues of quality and quality Plans are grown?

  This is where other issues of quality and quality Plans are grown?

  Ben

  As the quality is part of discrete manufacturing module that seems logical, but you might also find some useful discussion for the purchase or manufacturing process.

  JS.

• Satellite 2430-101: BIOS and many other issues

  Then... I had more than 1 question and I hope someone out there can answer...

  1 - is the new Bios (1, 60 - WIN) supports Hyperthreading? If not, is there an other BIOS that is compatible with the S2430-101?

  2. I want to replace the P4 2, 54GHz with a P4 2 8 GHz (800 MHz Bus, HT). If the Bios recognizes the new processor? The heat problem is not really a big problem for me, cause I plan to underclock (if its too hot for the old cooling system to manage) the P4 to 2.6. I want just the stuff (for example HT) of the new processor

  3. not the BIOS recognize a 120 GB HD?

  4. does anyone have experiences with the MSI mini-PCI combo (Blutooth/WLAN) card?

  5. the S2430-101 got a Geforce 4 420 go 32 MB... I was just thinking to upgrade to Geforce 4 440 go with 64 MB... Is this possible... His chip with several pipelines and so on... Its the same family... Has anyone tried replacing a laptop graphics chip? Perhaps a 'material-designer' Toshiba could give some comments to this :D Hey guys... Is this possible?...

  6 I need more power, I need more mAh: D... Do anyone know why the battery has more than 2 pins? Is there any material in the battery which tells the system information of the battery? If so, is it possible to build its own battery or system requires information from the battery in order to operate. If Yes, where can I get the specifications of this "battery pack material"?

  Thanks in advance... Stryker

  Hello

  I'm not an expert, but I'll try to help: :)

  1. There is no public list where you can read what each update BIOS contains or which issues are fixed. It is always recommended to install later and ONLY Toshiba designed update the BIOS.
  2. I can't give you specific information about CPU upgrade, but as far as I know, replacement of the CPU is often not possible. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and it is used in the interest of the miniaturization and heat dissipation. For more information try to contact the Service partner in your country.
  3. you will be lucky if someone has tested with the same unit. This unit is about three years old and it is not easy to say what is the maximum size of HDD supported by the BIOS. I found the info set comes with 40 GB and you can use 60 or 80 GB HARD drive, and I think that there should not be no problem. If you need more space, you can use external HARD drive (unit has USB 2.0 and data transfer speed will be fast enough)
  4. I don't think you can use any card combo on this device because of hardware architecture. WLAN is here but BT module is missing and you can use an external solution such as BT USB stick.
  5 update graphics card is usually not possible.
  6. sorry but this question is a bit stupid to me :) and I really put t know how you want to use the battery clean.

  Expensive Stryker at the end I just recommend you to buy a new laptop. Believe me it's much cheaper than all your projects for the upgrade. Please think about it!

• icon comments with other issues of icon and download arrow on this subject, on the Security tab.

  I'm on a laptop computer with dsl internet IE with another computer using the gateway. My os is Vista Home premium and service pack 2. I checked my settings on a regular basis and updated and scanned my system regularly. I periodically check the security settings for all the problems, and they are usually very good. However, I had taken a couple of times in administrator mode, I don't have the rights of security to certain files or programs. When I checked the security labels, I got a message that I could see the settings, but could not make changes. This should not be, as far as I know, because the administrator must have all the rights. I've never seen any icon like this on the Security tab, (or anywhere else) in the past. I went into the security on a folder tab and proceeded to bring up the list of groups and their safety features and found the icon comments soiled by a arrow pointing down. Guests (multiple) icon didn't. I can't bring up anything on this subject. I'm the only person on this computer, and I use the only admin account to do administrative tasks.  I have a personal account, which is a standard user account and both accounts are protected by Word. The guest account has never been activated. The curious to keep in mind another note is that other groups are listed under the name of my pc, but system and comments are not included, for a long time with others who are in the usual list of people or groups. I'm sure that the system must be included, because that always has all the rights. I don't have not find a way to change the icon, or find info for the customer. I searched your site and forums, as well as several other pc and tech support forums and can't find anything close to this issue, save the information on the Chameleon that MSN uses in their toolbar that makes icons from almost anything. Who is listed in my registry under MSN. It seems trivial, but I think it is maybe not so innocent, if it's way in. There are icons from two people on my printer files even if I checked them as not shared. I had checked to share, as well as the share folder normal, to see if anyone is on the network of the group to my computer profile. There was no evidence, however, I thought it would show the other computer on the local network, since the group is the same name. These icons came from. Everyone was listed as entitled to print and edit or delete parameters or printers and print on stations there. I couldn't do that. At most I would not have understood change or delete anything. In the group list, everyone was marked not with my pc name. Local service, I thought I was usually part of the active list is not marked either. System is not marked either. Here is a list of what it says:

  Administrator, administrators, ASPNET user to the debugger, distributed COM users, readers of the event log, the (acc't of the admin), comments, invited, IIS_IUSRS, IIS_WPG, Performance Log users, users of performance, (me), monitor users.

  I'm a little puzzled. Y at - it a simple explanation that I may have missed?

  In Vista, administrators have all the access rights as they did in XP.  NUMBER of cases do not have access.  There are records of point junction where everybody is seen to deny access.  This is intentional to decrease the chance that someone will change, move or delete something, they should not (even administrators).  Some of them can be modified in order to access and others require special modifications of access - which shouldn't be done without a VERY good reason (as told to do so by Microsoft Support).  What you missed is that the permissions have changed in Vista from XP.

  Here is some information on permisions and property in Vista that can help:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  A lot of general system groups are included by inheritance rather than be listed in each file and folder - that's why they are not always there - but they are.  If you select Advanced, you'll see permissions inherited from other folders.

  I have no idea on the arrow on the guest account - I don't know what that means.  It may have something to do with safety or you installed AV programs (I know that Norton did something similar with the files to show if they have been backed up).  Personally I don't use the guest accounts and recommend against them because they are too easy to use to hack the sytem (and other reasons).  I would keep the disabled guest account and delete the duplicates but one off a (in the start menu / control panel / user accounts / manage other users).

  I don't know why you can't see other computers on your local network - that sounds like a network or installation problem connection coming to redo the connection from scratch will fix (and then you can remove the one that isn't working right).  I don't know why your printer changed - rights but you can easily set them back to how they must be with the Security tab in the properties of the printer (and other settings in the start menu / control panel / printers).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photoshop CS6 will create not instant and other issues

  Recently, I had to update my computer and now works on Win10 (as 7) with the suite CS6. Just put the programs yesterday and noticed a few immediate problems. Two main issues I'm need a fix for and impossible to find on most of the files, I cannot choose to 'Save For Web'... "and now I know why. and when you use the Shift + Alt + Ctrl + E keyboard shortcut to generate a merged snapshot of layer in the layers panel, the shortcut doesn't do anything. I can create snapshots of history in the history panel, but that's all.

  I have checked the forums and help sections, etc.. The option "Merge a copy of all visible layers into target layer" is not available in my program for any reason any. I included a screencap of the relevant section of the default hotkeys for PS (from the photoshop reference guide) compared to what is in my program settings. I also checked to make sure that this control is not just 'hidden' - it is just not there.
  There may be other problems that arise, but for now, that's what I have. Can't find the answers elsewhere... I hope that someone else has had this problem and knows a good solution for it. I hope that this is just a step somewhere it's simple and I've simply forgotten... Thanks in advance.

  Unfortunately, CS6 is no longer supported and is not recommended with Windows 10. There are several posts on things, people have tried with CS6, but most of them seem to be hit or miss at best. Many users have downgraded Win 8 to continue using the CS6.

  These are only a few of them:

  CS6 works with Windows 10?

  Cannot install CS6 on computer with Windows 10

• ESXi 4.1, ESXi 5.1 - migration of data base and other issues

  Hello, we have a pretty small environment ESXi 4.1 Enterprise Plus
  with 3 guests. We have a standalone physical SQL server that hosts the database
  and a VM Server 2008 64 bit running vCenter. I wanted to use Server 2008 R2
  for the vCenter, so I intend to install a new VM running this OS. Is it possible
  the new basis of use 4.1 existing vCenter 5.1 (I guess he needs to)
  mise_a_jour/migration) and have 3 4.1 ESXi hosts to vCenter 5.1 report? I have
  then remove the vCenter 4.1 and upgrade the hosts of 4.1 to 5.1. The
  Another option Im contemplating implements the vCenter 5.1 with a new SQL
  database.

  Also there are issues keeping the hosts at 4.1 when using
  vCenter 5.1 for a few weeks?

  Thank you!

  Is it possible to have the new vCenter 5.1 using the existing base of 4.1

  Years: This is not possible, during the upgrade to vCenter Server 4.1 to 5.1, I saw the database schema changes. Schema be compatible freshly installing vCenter server 5.1 and connects to the 4.1 database and do not support.

  A report of hosts ESXi 4.1 3 Center 5.1?

  Years: It is possible, ESXi4.1 works seamlessly with vCenter Server 5.1. Once you upgrade to vCenter server 5.1 level, all the host esx4.1 will connect to improved vCenter Server 5.1

  The other option I'm contemplating implements the vCenter 5.1 with a new SQL database.

  Years: you lose all configurations and need to connect ESX4.1 to the new host Server 5.1 and reconfiguration

  Also is there any problem keeping the hosts to 4.1 using vCenter 5.1 for a few weeks?

  Years: As mentioned above, it works and it is compatible.

• Cp1252 Txt and other issues

  Hi all, before I tell you: Yes, I've seen other threads

  Version: InDesign CS4, with the latest updates. (it broke down with and without these applied)
  Operating system: XP sp 3, freshly reformatted and updated

  Question: InDesign installs well, updates very well, then after 1-2 use crashes. It serves to plant and require reinstalling for different reasons before reformat, now it just gives: "lack required file cp1252.txt" and need to reinstall.

  -If I try and uninstall in Add/Remove, it is said that it is already uninstalled.
  -If I run the suite cleaner, it says that nothing is there

  -Is adobe still clearly in the files.
  -It is installed on another computer. end (win 7 I think)

  
  Before reformat, it's the liscencing breaking. The same results happened over him now is something else.

  issues related to the:
  -T-32 or 64 bit versions has something to do with it. I don't have a program file (x 86), being an old PC, so everything is in the same place...

  -Is this a conflict with any other adobe products (only other facility other than what was on the CD of indesign is reader and flash plugins for browsers) or is it just a metter of move the files to the location?

  -What is the legality of lighting adobe HQ on fire?

  -Is it just my bad luck, or am I doing part of the only handful of people who run these programs very well on an older computer/OS?

  It's very frustrating, because I sank more than 12 hours last week (most of it on hold) to the Adobe customer service, and now all of a sudden they say they stopped supporting Cs4. GAH! I run a local weekly newspaper, and this is really bumming me out.
  Thank you forum hero!

  Similar topics:
  http://forums.Adobe.com/message/1318199#1318199
  http://forums.Adobe.com/message/3218720#3218720

  I refuse to spend several hundred dollars on a programme of work perfectly just because it's the DRM to malfunction.

  I fully support your reluctance to upgrade. In addition, it is well known that FlexNet is garbage. FlexNet is the protection of the license for another tool that I use on a daily basis, and so I'm really used to fight with her. It's a nasty piece of work, and part of its Magic (TM), is that when someone tries to remove it illegally (to break the protection license, I mean), it falls badly enough to require a disk format hard until you can get back to work. Which you already know, of course. (Thank your lucky stars that you don't need to feed the serial number of your hard drive or motherboard, for these kinds of FlexNet install, it'll never work on this new material.) Version of Adobe fortunately does not do this.)

  Two questions, one of which is a repetition:

  (1) you install an installation program downloaded, or a DVD?

  (2) have you tried all the things in this article? Reset rights on files related to FlexNet often works.

• Adobe Production Premium CS5.5 installation and other issues errors

  Hello

  I have just installed CS5.5 Adobe Production Premium on my computer and had a few errors pop up at the end of the installation.  I will paste the summary below.   I tried to install Procction Premium a couple of times.  I used the Adobe cleaning tool.  What I did the research, the Flash issue is a false error given that Flash was already installed on the computer.   The rest is connected to the program as well Flash?

  Thr programs all appear to work except for the below question well.

  My other question is that when I'm in Windows Explorer and I am entitled to say a .jpg file and select open with...  I am not able to choose Adobe Photoshop or Illustrator for this question.  I have Dreamweaver CS4 and who is presented as an option.  I went through the process of trying to add the Adobe Photoshop .exe file, but it still does not work.  However, if I open Adobe Bridge, I can select Photoshop or Illustrator to open a file.  Is this related to my setup or is there something else?  I uninstall an older version of Adobe Photoshop 7.0 I've had for years, but it was prior to the installation of Production Premium CS5.  Could that have caused a problem?  I read that uninstalling an old Photoshop can cause problems like this.

  Any help would be greatly appreciated.

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 2 warning (s)

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current

  Status: Exit Code 0: 0 Service specific exit Code: 0 (Seq 1)

  -Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -.

  WARNING: DF035: file CreateAlias:Icon does not exist in C:\Program Files (x 86)

  \Adobe\Adobe utilities - CS5.5\Pixel Bender Toolkit

  2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.7E8FC6P-

  1021rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a28 97e9da68fce for 2.6.lnk C:\ProgramData\Microsoft\Windows\Start Start Production Premium CS5.5\Adobe Pixel Bender Toolkit icon with target C:\Program Files (x 86) \Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe (Seq 89)

  -Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0.

  ERROR: Error 1722.There is a problem with this Windows Installer package. A program running in the framework

  installation did not complete as expected. Contact your provider to support personal or package. Action

  NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe, command: -.

  install the plugin - msi

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error: 1722.There error is a problem with this Windows Installer package. A program managed

  as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  Action NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe,.

  control: - install the plugin - msi

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Flash Player 10 Plugin: installation failed

  -------------------------------------------------------------------------------------

  Post edited by: rynohose

  Yes, your installation errors seem to be false harmless errors associated with the brain dead install Flash. If the programs seem to work fine, don't worry in this regard. As much as not being only unable to open images with Photoshop from Windows Explorer, I recommend you to take this issue to the Photoshop forum.

• Refresh after Windows10 resembles the old Firefox; all pages in FF look 'safe mode' and other issues.

  Hello

  I recently downloaded Windows 10 and noticed FF goes really slowly. So in some way I have refreshed it. I knew that this would erase some bits of data, but now I am unable to restore things.

  It looks like an earlier version. When I go to any page FF, everything appears in a list. I can't choose a new theme, for example, b/c the Mozilla page cannot display graphics. In addition, I'm typing this in Chrome b/c there is no text box when I open this page in FF. I don't want to go back to Chrome.

  Thank you!

  Thank you, in this case, please turn off https scanning in avast, as it is known to cause various problems:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• I recently installed 29,0 FF and found a lot of problems with it, Noia 4 does not work, neither does Fox clocks and other issues. Have they been corrected 29.1?

  Is FF 29.1 that FF 29,0 where we users lose control of our browser and can not customize to our liking. If Yes, how do I stop the noise annoying ups tell me to install because of security issues or not I stay with 28.0 FF. Thank you people for any answer, they are much appreciated cheers.

  set the correct time zone, the date and time on your system: time.is

• I continue to receive requests to upgrade to Firefox 25, but then he said that it is not compatible with Kapersky. Other issues. How can I talk with a real person?

  I keep getting windows pop up on my screen to update, but it still says that it is not compatible with Kapersky, I just update. Makes me nervous. In addition, belongs to Adobe of Mozilla? I can't seem to update that. However, it seems like if I can't download the videos at all and a large number of photos. I'm not computer savvy, and it's frustrating trying to navigate through it all.

  You need to update Firefox 25.0.1. The real Kapersky Antivirus does not work in Firefox so it will still work, the only thing that will be disabled will be especially useless Firefox Add-on e kapersky. Remaining on older versions of Firefox actually leave you vulnerable to security problems.

  Adobe is not a part of Mozilla. You can go to http://get.adobe.com/flashplayer/ to install Flash (don't include other software)

• I can't see a message from my Union because of problems with the address changed for pop-upwindows and some other issues

  Hello
  I am from Sweden and I have problems with a Web site that has my Union. I could see messages from them before, but they changed their address and on the site, they say people that they must put the new address on the approved list of the pop-up windows. I did but it still does not. Maybe I did wrong, I don't know, but it's annoying as hell that I can't see the messages they send.

  I really need help with that.

  Best regards
  Lena

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can delete all data stored in Firefox with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• YouTube videos does not (yet) - searched all the other issues, none of the fixes seem to help. I have cleared the cache, disabled Ad Block, updated etc.

  As indicated, I have updated Java, Flash, all my plug-ins, deleted those I don't need, cleared my cookies and history, no dice.

  Why are there so many compatibility problems with YouTube?

  Works very well in any

  My YouTube was working fine, then one day just decided to stop working.

  I found the answer: http://forums.adobe.com/thread/1018071?tstart=0 it's a conflict with RealPlayer. Furthermore, in order to find this thread again, I had to use a google search. Is there really no way to find a person own issues through our own profile?

• Problem with iTunes gel preferences and other issues.

  I don't know why, but the week last iTunes randomly decided to not work: whenever I try to open the preferences panel it hangs and release only randomly after a few minutes only to freeze again when I change the tabs. Also, all devices that I connect so that open freezes iTunes, yet once it thaws in itself rarely after waiting an hour or more but crashes again soon after.

  I tried everything short of wiping the disk and start from scratch (not an option to be honest): followed every single link help I found on Apple's site, used several malware scanner, defragmented, made several clean install iTunes and its components.

  I'm on an ASUS N53SV win 10, latest version, all the updated drivers. I don't really know what else remains.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I don't see all my pages recently marked a bookmark and when I try to erase some of see more clears both the original and the copy of other issues when I want only one referenced recently disappeared.

  I have twenty bookmarks in my section recently marked with a bookmark, I copied and their fate. But when I start to remove it Mozilla will remove the copy and the bookmark recently how can I fix that so I can get to the other stuff recently marked with a bookmark?

  If you copy a bookmark in a list of smart folder and paste in another folder, then you create a copy, and you have the bookmark in two folders.