Out-of-phase record

Similar Questions

• How can you change the style out of your records

  Hello

  Is there a way you can change the style or the icon off all your records

  Thank you

  Goryon

  Hello

  If you are referring to the customization of the folder that includes the display of folders, the etc folder icon change, then you can check out the link below.

  Behavior and change folder views

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-thumbnail-size-and-file-details

  How to modify your folder view settings or customize a folder

  http://support.Microsoft.com/kb/812003

• Why is the data synchronized out of phase

  I'm trying to sync my calendar with a NEITHER-9237 and a NOR-9244 in a C chassis - daq 9178. When I'm not synce synchronization using BD1 (block diagram) it produces this Chart1 XY (data in phase I research). However, to change the data to synchronize acquisition BD2 (block diagram) it produces this Graph2 XY (not the same XY data figure 1).

  All the information to fix this error would be appreciated.

  Just answer for the most recent message - no time now to carefully dissect any advance information.

  First and it of quite a nonfunctional nitpick, but would it not less confusing to put the

  initials HAVE config calls * Sub * the encoder configuration calls so that you would not have to cross the streams?

  Secondly, it seems that youv'e ' e configured your task of coder to make its sampling based on the

  «"" "Sample clock of IT.»»»"  Good so far.

  The call to perform Nulling incur the subsystem HAVE.  I'm assuming that it uses your

  other settings for config task (for example, the sampling frequency) in the process, so you start generating

  Sample of AI clocks implicitly generating in turn encoder samples.

  Sides are the Nulling operation will then stop the sample clock when it's done - it's the

  normal behavior for automatic start-up operations DAQmx.  So here's what * I * will try:

  Perform removal * before * starting the encoder task so that the task of the encoder collect

  samples while you null your bridge.  As a precaution, call DAQmx Stop for your task to HAVE

  just after deletion.  * Then * start your task of encoder, and then finally (re) start your HAVE

  task.

  -Kevin P

• Laptop screen out of phase, only in normal when starting the operating system loaded, how to fix?

  My laptop screen guard flicking down, as if she were in phase opposition when the normal mode is responsible, when I use the modes safe, that the screen is fine and authorized to use, what can I do to fix this?

  Thank you
  Jack

  Try updating your graphics card:

  Go to the support site for your computer manufacturer and download the latest driver for your graphics card specific to your operating system (Vista 32 or 64 bit). Looking for instructions on the site of support on how to uninstall and install the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Find out how to record things I don't want to remove it from windowsold

  I would like to know how to record some of my stuff before you remove old windows

  Hi, Cathy,.

  If you are in the folder and you know what documents you don't want to delete,

  Hold down the CTRL key, and then select all the files you want to keep clicking one by one.  Now keep the Ctrl key while selecting the files

  Right-click on the last selected file and select move to folder

  Move the items window will open

  Navigate to where you want to move documents

  If you do not have a folder prepared for these documents, click on create a new folder

  Once you have created the folder, click on move

  You have completed

• User out without using record & LOGOUT_URL.

  This should be pretty easy I think.
  
  I have a "Logout" link in the upper right corner using the & LOGOUT_URL. variable so that the user can disconnect and return later to log back in. The & LOGOUT_URL brings back them to the login page (page 101).
  
  After the user has completed this rather long form, multiple page, on transmission, I process the form, block their account (just a flag in their files so that they cannot connect to) and then I want to log them and redirect them to a page "your account has been locked and you have been logged out."
  
  So I don't think I can use the & LOGOUT_URL. variable because that redirects them to the login page (page 101) and I want to keep it there.
  
  I need another way to log them that fires on the submit button.
  
  I guess my problem is that I know how to create a branch to the & LOGOUT_URL when the button submit comes in the QUERY. But now that I want to create a branch to one page other than the login page 101, I don't know how to do this.
  
  Gee, I hope that makes sense 8-)
  
  Thank you.

  If your current page, where you have placed this button requires authentication, then it submit the form and forward your user to the login page if you are using this as the URL of your button:

  JavaScript:doSubmit('SUBMIT'); JavaScript:Redirect('wwv_flow_custom_auth_std.logout?p_this_flow=&APP_ID.&p_next_flow_page_sess=&APP_ID.:&APP_PAGE_ID.');

  If you want to transfer your username to a page that doesn't require authentication (let us say you have an and the number is like 1000), you can use this instead:

  JavaScript:doSubmit('SUBMIT'); JavaScript:Redirect('wwv_flow_custom_auth_std.logout?p_this_flow=&APP_ID.&p_next_flow_page_sess=&APP_ID.:1000');

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Out of merge records data problems

  I tried all kinds of things to get this data fusion to work correctly, after reading several discussions on an excerpt from bugs, setting up a new document...

  I created the 1.75 x 7.5 "labels, 5 upwards on a sheet. It is ID CC 9.1 on a Mac with 10.9.

  I finally got close after several tries, but you will see in the picture that it is not only the merger on a page, but also merge to the wide on the side and under the page. Any suggestions on how to fix this?

  Thanks in advance!

  

  OK, got your file. If you group the fileds with image data, so everything is in a group, it should work (I get some frames in excess, however).

  I don't know why it goes well. From my experience, when your placeholders are a failure in the content with any other group you want to duplicate on the master as you should keep only the content to reproduce, so I would have expected a single image and a lot of addresses, per page. Maybe it's a bug in the CC, but since this is the first merger of data, I tried in this version, I am not prepared to say that's for sure.

• 9225 and 9227 Module Constant phase shift (Drift)

  Hello

  I wrote a large VI and the am acquisition voltage and current with the 9225 and 9227. The phase of the voltage and current constantly derivatives. Its not just for phase a bit for all of the portion; the phase constantly cycles from 0 to 360 degrees. I have an excel file with locations showing what I mean. Series 1 = voltage 2 = current

  I wrote a small VI to do the same thing with nothing extra. I have not yet add the data record. I just use a graph to plot the voltage and phase. The voltage and current were still off!

  What do you think. Timers are bad on the modules? Slow computer? DAQ assistants are not good? IM using the internal timers in the modules.

  Synronizing at the beginning does not help because the signals would still go out of phase when even later. The load is a piezoelectric tube.

  I'm using Labview 2011 and NEITHER cDAQ-9178:
  9225 3CH 300 Vrms 24 BIT simultaneous AIN
  9227 4CH 24-BIT simultaneous AIN 5Arms

  See you soon

  I forgot to change to continuous. I do usually. The major difficulty that I did was remove the trigger "Start Digital Edge" completely. The trigger wasn't working properly with what I put it in, "PFI0"... Once I took it out, I got a sample invaded. I played with the numbers of the sample for the clock sampling and playback. I don't know why to use 25000 everywhere has not worked. But when I dropped the numbers to 6250 or something of this magnitude, the VI finally worked.

  The VI works with or without the clock I specified (Mod7/AI/sampleclock), which is great news! Thanks for this tip!

  The current and voltage are finally in sync. They will never out of sync! Finally I can calculate the POWER!

  This digital trigger was the worst headache... Thanks for the tips!

  I write the VI and the code snippet to my completed solution.

  

• British television SKY forr DXV60KB HDD recorder does not

  Hi Im post for one of my friends, they're trying to hook up a toshiba rdxv60kb 9 years old sky box recorder, and the EPG option is grayed out on the recorder.

  They have no phone line connected to the satellite box and I was expecting a confirmation as to what it could be?

  Ty

  Hello

  Here a user manual, I found on the net
  http://www.superfi.co.UK/images/manualbrochure/RDXV60-English-specific.PDF

  EPG cannot be displayed during recording.

  To call EPG while you watch analog/DVB channel or external input (AV1/AV2/DV (AV3)), press the GUIDE.
  You can also view EPG by following the steps.
  1 in stop mode, press SETUP. Select the timer programming by using the up and down arrows, then press ENTER\OK.
  2 Select EPG using the arrow pointing upwards and downwards, then press ENTER\OK

• Sony Action Cam live AS30 / V Out?

  Hello! Don't AS30 can live out AV while recording? I'm a fan of b.

  cmosse is right. The HDR-AS30V preliminary specifications indicate that it can produce HD video via its micro HDMI port.

  If my post answered your question, please mark it as "accept as a Solution.

• How can I get the CLK OUT using PLL on NI PXI-6652?

  I'm trying to get out the CLK using internal CLK either or PXI_CLK10_IN and PLL DDS source to the required frequency. In other words, I want the CLK coming OUT the NI PXI-6652 be PLL frequency required.

  Ashok

  Hello

  Unfortunately, it has no direct route in material to get the DDS at PXI_CLK10_IN clock.  In general, PLL is used for external signals that are out of phase with the system and not for signals generated internally.  From the 665 X operating instructions online, here is an overview of the functions of the Board of Directors:

  

• phase of a signal

  Hello

  I have a signal and you want to measure the phase and ampl. I m try three different methods, i.e. Discrete Fourier Transform (I just calculate myself, according to the formula), Fast Fourier retrieves only your information (using the sub - vi nickel) and all give same range but different phase. Can someone take a look at my sample program and help me figure out what is wrong.

  Thank you

  Take a look at the attached (version 8.0).  All the approaches came up with the same value after you have made the following changes.

  1 FFT - off "unpack phase" so reading is included between - pi and pi.

  2 DFT - deny the imaginary part (I found equations show the imaginary part reversed)

  3. single signal - subtract 90 degrees out of phase

  4 Multi tone - subtract 90 degrees out of phase

  Of course, if you do not deny the imaginary part of the DFT, and the DFT, simple tone Multi tone all pretty well corresponds with the FFT being shifted 90 degrees.  I can't tell you why this is so.  Maybe guys CAN shed some light on the differences.  I hope this helps.

• I want to do simultaneous 180 continuous signal phase (square) to 2 analog outputs

  Hello

  I would like to use a meter to trigger (internally) 2 outputs analog, such as the continuous AC signal to each output is shifted 180 degrees.

  I hoped to do with no external connection in addition to the ao0 and ao1 was to use a timer as a trigger counter and have a trigger analogOutput on the front and the other trigger on the falling edge to get the required result.

  However, it doesn't matter how I get there.   An absolute requirement is that two continuous AC signals are present to ao0 ao1 outputs and they are out of phase by 180 degrees and all trigger occurs on the PXI bus with no other connections external that is frequency of 25 Hz.  My card is an SMU-6363.

  I was hoping to get the hardware to do all the work of relaxation but if there is a trigger of software approach that would be

  Thank you

  That's what I ended up doing.   microseconds is quite good enough.

• Measurement of Phase difference of audio - learning how to set the reference

  I'm trying to measure the difference in phase between two audio inputs. (Left and right channel of my sound card)

  Both are free running 1 kHz audio samples that come in and out of phase.

  When the samples are in phase, everything seems to work fine and shows no phase difference.

  However once that signals start to emerge from the +-10deg phase the result keeps jumping around.

  It seems to be the fact that it is changing the reference to determine the phase.

  When I view the phase of the output of a channel is a sawtooth waveform, from 250deg and then wraps round to-110deg

  What I want, it's an entry set to 0 degrees and see the other inputs of difference of phase against it.

  Is there a way to give a signal as being the reference or another strategy?

  Thanks in advance for any help.

  PLEASE NOTE THAT THE acquire.jpg IS ACTUALLY THE VI.

  It wouldn't download like the vi. Please rename extension to acquire.vi to see.

  Finally managed to find the problem.

  Red rooster, I tried to replace your entries simulated with audio inputs card his real world and things turned out horribly.

  It doesn't seem to be a translation between the two. (Perhaps because of my understanding of Labview garbage)

  LabVIEW uses the internal reference of the DAQ cards in order to make phase measures.

  That's what all use the phase VI of measure and which lack of cards not NI - DAQ.

  That's what I thought that missed me first place but there's no way I can see simulations your own.

  To work around the problem, I used zero crossing detectors in order to compare the time ahead or lagging behind the benchmark for the calculation of phase.

  I got the core of the detector from somewhere on the forum but have lost the actual page. (my apologies to the author who deserves the credit)

  Anyway, hope this hepls someone.

• measurement of signal of phase

  I want to measure a signal in phase and out of phase, how do I set up a VI to measure them separately?

  The phase of a signal linked to what?

  For a measurement of phase, you must always a time reference (or a reference to another signal phase)

  If you have a rude sine signal, you can try vi tone detection, the output is of amplitude and phase, so just calculate has and b (see complex number functions)

  Or you use the FFT vi and get the bins already complex at frequencies which correspond to those you are looking for, if all goes well except if you match the input data (or do a bit of math more , BTW is what makes detection of tone vi)