Outgoing Microsoft VPN via a device ASA 5505
Hi all
I installed an ASA 5505 device for a client just now and they were delighted by improving stability VPN, he provided them, as they work for the most distance and VPN in all day to access their servers at the office. Recently, however, some staff members have spent more time at the office and where they discovered that they are unable to establish a VPN out to customers that are running Microsoft based on virtual private networks. The nature of their activity forced him to regularly establish the VPN to the servers of their customers to download data. They can establish successful Cisco VPN clients when they are in the office or working remotely, but they are not able to connect to the MS VPNs outside the office. What configuration changes I have to do on the ASA 5505 in order to solve this problem for them? Any help would be greatly appreciated.
See you soon,.
John
Hello
If the clients are connecting to a Microsoft VPN through the ASA using PPTP, you need to allow outgoing traffic (if there is an ACL that is applied to the inside interface) and also to activate the inspection of PPTP.
Policy-map global_policy
class inspection_default
inspect the pptp
Let us know how it goes.
Federico.
Tags: Cisco Security
Similar Questions
-
connect Cisco VPN client v5 to asa 5505
I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.
Cannot ping asa 5505
Any ideas on what I missed?
Try adding...
ISAKMP nat-traversal crypto
In addition, you cannot ping the inside interface of the ASA vpn without this command...
management-access inside
Please evaluate the useful messages.
-
VPN tunnel between 2 ASA 5505 with the same default gateway
Hello
Is it possible to create a vpn ipsec site to site (laboratory environment) between two 5505 (ASA IOS 8.2 (5) & asdm-645-206) with the same default gateway. That is a VPN tunnel or a back to back-to-one site that I have to deploy a router and hang each 5505 out a different interface? We have a lot of public IP but only one gateway our ISP (Internet). Any suggestions or recommendations are very appeciated!
d
Yes - you can even do it with a xover cable and a 30 ip on both external interfaces.
-
Client VPN Cisco ASA 5505 Cisco 1841 router
Hello. I'm doing a connection during a cisco vpn client and a vpn on one server asa 5505 behind a 1841 router (internet adsl2 + and NAT router).
My topology is almost as follows
customer - tunnel - 1841 - ASA - PC
ASA is the endpoint vpn (outside interface) device. I forward udp port 500 and 4500 on my router to the ASA and the tunnel rises. I exempt nat'ting on the asa and the router to the IP in dhcp vpn pool. I can connect to my tunnel but I can't "see" anything in the internal network. I allowed all traffic from the outside inwards buy from the ip vpn pool and I still send packets through the tunnel and I get nothing. I take a look at the statistics on the vpn client and I 2597 bytes (ping traffic) and there are no bytes. Any idea?
Where you you logged in when you took the "crypto ipsec to show his"? If this isn't the case then try again, also this option allows IPSEC over UDP 4500 and it is disabled, enable it.
ISAKMP nat-traversal crypto
Just enter the command as it is, then try to connect again after activation of this option and get the same result to see the.
-
Error of customer Cisco VPN connection ASA 5505
I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.
CISCO VPN CLIENT LOG
Cisco Systems VPN Client Version 5.0.06.0160
Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.1.7600
Config files directory: C:\Program Cisco Systems Client\
1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "71.xx.xx.253".
4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B
Attempts to establish a connection with 71.xx.xx.253.
5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253
7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253
16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194
18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253
23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1
26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0
27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250
28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251
29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000
30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA
31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45
33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0
37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253
38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047
This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now
42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253
45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = 89EE7032
46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 71.xx.xx.253
48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8
49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED
51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
----------------------------------------------------------------------------------------
ASA 5505 CONFIG
: Saved
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain masociete.com
activate tdkuTUSh53d2MT6B encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 172.26.0.252 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP address 71.xx.xx.253 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain masociete.com
access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA
Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0
outside_access_in list extended access permit icmp any one
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp
outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240
inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255
static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 172.26.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server WINS 172.26.0.250 172.26.0.251
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
value by default-field TLCUSA
internal LIMUVPNPOL1 group policy
LIMUVPNPOL1 group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
VPN-idle-timeout 30
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list LIMU_Split_Tunnel_List
the address value VPN_POOL pools
internal TLCVPNGROUP group policy
TLCVPNGROUP group policy attributes
value of 172.26.0.250 DNS server 172.26.0.251
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Re-xauth disable
enable IPSec-udp
value by default-field TLCUSA
barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0
username barry.julien attributes
VPN-group-policy TLCVPNGROUP
Protocol-tunnel-VPN IPSec l2tp ipsec
bjulien bhKBinDUWhYqGbP4 encrypted password username
username bjulien attributes
VPN-group-policy TLCVPNGROUP
attributes global-tunnel-group DefaultRAGroup
address VPN_POOL pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
no authentication ms-chap-v1
ms-chap-v2 authentication
type tunnel-group TLCVPNGROUP remote access
attributes global-tunnel-group TLCVPNGROUP
address VPN_POOL pool
Group Policy - by default-TLCVPNGROUP
IPSec-attributes tunnel-group TLCVPNGROUP
pre-shared-key *.
ISAKMP ikev1-user authentication no
tunnel-group TLCVPNGROUP ppp-attributes
PAP Authentication
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:b94898c163c59cee6c143943ba87e8a4
: end
enable ASDM history
can you try to change the transformation of dynamic value ESP-3DES-SHA map.
for example
remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5
and replace with
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
-
ASA 5505 VPN cannot access inside the host
I have access remote VPN configuration on an ASA 5505, but cannot access the host or the AAS when I connect through the VPN. I can connect with the Cisco VPN client and the VPN is on on the SAA and it shows that I am connected. I have the correct Ip address, but I can't ping or you connect to one of the internal addresses. I can't find what I'm missing. I have the VPN without going through the ACL interface. Because I can connect but not going anywhere I'm sure I missed something.
framework for configuration below
interface Vlan1
nameif inside
security-level 100
10.1.1.1 IP address 255.255.255.0
IP local pool xxxx 10.1.1.50 - 10.1.1.55 mask 255.255.255.0
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 set pfs
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
PFS set 40 crypto dynamic-map outside_dyn_map
Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA
Crypto-map dynamic inside_dyn_map 20 set pfs
Crypto-map dynamic inside_dyn_map 20 the value transform-set ESP-3DES-SHA
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
map inside_map 65535-isakmp ipsec crypto dynamic inside_dyn_map
inside crypto map inside_map interface
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
global service-policy global_policy
XXXXXXX strategy of Group internal
attributes of the strategy group xxxxxxx
banner value xxxxx Site Recovery
WINS server no
24.xxx.xxx.xx value of DNS server
VPN-access-hour no
VPN - connections 3
VPN-idle-timeout 30
VPN-session-timeout no
VPN-filter no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelall
by default no
disable secure authentication unit
disable authentication of the user
user-authentication-idle-timeout no
disable the IP-phone-bypass
disable the leap-bypass
disable the NEM
disable the NAC
NAC-sq-period 300
NAC-reval-period 36000
NAC-by default-acl no
the address value xxxxxx pools
enable Smartcard-Removal-disconnect
the firewall client no
WebVPN
url-entry functions
Free VPN of CNA no
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
tunnel-group xxxx type ipsec-ra
tunnel-group xxxx general attributes
xxxx address pool
Group Policy - by default-xxxx
blountdr group of tunnel ipsec-attributes
pre-shared-key *.
Missing nat exemption for vpn clients. Add the following and you should be good to go.
inside_nat0_outbound list of allowed ip extended access any 192.168.10.0 255.255.255.0
NAT (inside) 0-list of access inside_nat0_outbound
-
Install two the separate IPSec VPNS on ASA 5505
Hello
I'll have set up a second tunnel IPSec VPN on my Cisco ASA 5505 to another office. I was able to configure one without problem through the ASDM, but were not able to get the second.
The IPSec tunnel connects to a WRVS4400N router to the other office. I tried the debug crypto isakmp and ipsec crypto, but I get nothing. Here is the config. Something seems wrong on my end? I've also attached a screenshot of the configuration settings on the remote router.
Output of the command: "show run".
: Saved
:
ASA Version 8.2 (5)
!
hostname WayneASA!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 70.91.18.205 255.255.255.252
!
interface Vlan5
Shutdown
No nameif
security-level 50
IP 192.168.10.1 255.255.255.0
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
75.75.75.75 server name
75.75.76.76 server name
domain 3gtms.com
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
inside_access_in of access allowed any ip an extended list
IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0pager lines 24
Enable logging
Within 1500 MTU
Outside 1500 MTU
IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0
NAT (inside) 1 0.0.0.0 0.0.0.0inside_access_in access to the interface inside group
Access-group out_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 1 corresponds to the address IPSec_Access
card crypto IPSec_map 1 set peer 50.199.234.229
card crypto IPSec_map 1 the transform-set VPNTransformSet value
card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
card crypto IPSec_map 2 set pfs Group1
card crypto IPSec_map 2 set peer 98.101.139.210
card crypto IPSec_map 2 the transform-set VPNTransformSet value
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
IPSec_map interface card crypto outside
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.199.234.229crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet 192.168.1.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 60
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.100 - 192.168.1.199 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal RemoteTunnel group strategy
attributes of Group Policy RemoteTunnel
value of server DNS 75.75.75.75 75.75.76.76
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
3gtms.com value by default-field
eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
username password encrypted URsSXKLozQMSeCBk privilege 5 lestofts
username lestofts attributes
type of remote access service
algobel lBWy5eNbHMCDPzuL encrypted password username
username algobel attributes
type of remote access service
type tunnel-group RemoteTunnel remote access
attributes global-tunnel-group RemoteTunnel
address pool VPNPool
Group Policy - by default-RemoteTunnel
IPSec-attributes tunnel-group RemoteTunnel
pre-shared key *.
tunnel-group 50.199.234.229 type ipsec-l2l
IPSec-attributes tunnel-group 50.199.234.229
pre-shared key *.
tunnel-group 98.101.139.210 type ipsec-l2l
IPSec-attributes tunnel-group 98.101.139.210
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the icmp
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the tftp
Review the ip options
inspect the dns
inspect the pptp
inspect the sip
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:a86adc4b23977672679b6fb72d0bc187
: endYou are also missing the NAT0 rule
inside_nat0 to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.5.0 255.255.255.0
-Jouni
-
I have a RV042 VPN router inside an ASA 5505 running version 7.2. I am trying to connect from the outside to the RV042. I have read for 2 days now and tried everything I found and had no success. I can connect from the network for the RV042 inside so I don't know which is configured correctly. I found links on several posts to the official Cisco support documents, but they have no meaning to me. It is my first experience with a Cisco Firewall.
We also have a network of security cameras which we can access outside and I managed to set up the port forwarding for that.
Here is my current setup running. Inside the RV042 ip address is 192.168.168.25. I had passed, GRE has opened, the port 1723 and have Setup PPTP inspection. I removed port forwarding at this time.
Can anyone help?
Thank you
Todd
Output from the command: 'show running-config '.
: Saved
:
ASA Version 7.2 (3)
!
suite host name
domain hivermont.com
activate vwiH3D2KQdqR57As encrypted password
names of
!
interface Vlan1
nameif inside
security-level 100
192.168.168.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP 75.144.147.155 255.255.255.248
OSPF cost 10
!
interface Vlan3
Description reviews network
prior to interface Vlan1
nameif guestlan
security-level 50
IP 192.168.2.1 255.255.255.0
OSPF cost 10
!
interface Vlan13
network of Aloha description
nameif aloha
security-level 75
IP 192.168.1.1 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 3
!
interface Ethernet0/3
switchport access vlan 13
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
vwiH3D2KQdqR57As encrypted passwd
passive FTP mode
DNS server-group DefaultDNS
domain hivermont.com
network VPN - TCP object-group
host of the object-Network 192.168.168.25
network-object 75.144.147.152 255.255.255.248
object-group Protocol DM_INLINE_PROTOCOL_1
object-protocol gre
access extensive list ip 192.168.168.0 inside_nat0_outbound allow 255.255.255.0 192.168.167.0 255.255.255.0
outside_access_in list extended access permit tcp any interface outside eq 81
outside_access_in list extended access permit tcp any interface outside eq 6036
outside_access_in_1 list extended access allowed grateful if any host 192.168.168.25
Note to access list TCP VPN connection outside_access_in_1
Comment from outside_access_in_1-access VPN UDP connection list
Note to access list TCP VPN connection outside_access_in_1
Comment from outside_access_in_1-access VPN UDP connection list
inside_nat_outbound of access allowed any ip an extended list
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
guestlan MTU 1500
Aloha 1500 MTU
IP local pool dial_pool 192.168.167.100 - 192.168.167.110
no failover
the monitor inside interface
interface of the monitor to the outside
the interface of the monitor guestlan
the aloha monitor interface
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 523.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 access-list inside_nat_outbound
NAT (guestlan) 1 0.0.0.0 0.0.0.0
NAT (aloha) 1 0.0.0.0 0.0.0.0
public static tcp (indoor, outdoor) interface 81 192.168.168.20 81 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 6036 192.168.168.20 6036 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 75.144.147.158 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.168.0 255.255.255.0 inside
http 192.168.167.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac dial_set
Crypto dial_map dynamic-map 10 transform-set dial_set
map vpn_map 65535-isakmp ipsec crypto dynamic dial_map
vpn_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
ISAKMP crypto 10 nat-traversal
Telnet 192.168.167.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.168.0 255.255.255.0 inside
SSH 192.168.167.0 255.255.255.0 inside
SSH timeout 20
Console timeout 0
management-access inside
dhcpd address 192.168.2.100 - 192.168.2.199 guestlan
dhcpd dns 68.87.71.226 68.87.73.242 interface guestlan
dhcpd lease 14400 interface guestlan
guestlan enable dhcpd
!
priority queue inside
!
Global class-card class
match default-inspection-traffic
Interior-class class-map
match any
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
World-Policy policy-map
Global category
inspect the ctiqbe
inspect the dcerpc
inspect the dns
inspect esmtp
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the http
inspect the icmp
inspect the icmp error
inspect the they
inspect the amp-ipsec
inspect the mgcp
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the sip
inspect the skinny
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the waas
inspect xdmcp
class inspection_default
inspect the pptp
political inner-political map
internal category
priority
!
service-policy-international policy global
service-policy domestic-policy interface inside
WebVPN
CSD image disk0:/securedesktop-asa-3.1.1.29-k9.pkg
enable CSD
internal remote group strategy
Group remote attributes policy
value of 68.87.71.226 DNS server 68.87.73.242
VPN-idle-timeout 30
Protocol-tunnel-VPN IPSec
username, encrypted Tbridges boO63YoQ/XbbOab8 password
username Tbridges attributes
Strategy-Group-VPN remote
todd YmIbsl9a0Do623E2Fipr5w password user name is nt encrypted privilege 15
IPSec-attributes tunnel-group DefaultRAGroup
ISAKMP retry threshold 10 keepalive 2
tunnel-group type remote ipsec-ra
tunnel-group remote General attributes
address dial_pool pool
tunnel-group remote ipsec-attributes
pre-shared-key *.
context of prompt hostname
Cryptochecksum:6aa5f44393e8771d4cd28186e18e5618
: end
Are you trying to connect to RV042 with PPTP VPN?
If you are, then here is the configuration:
public static tcp 1723 interface (inside, outside) 192.168.168.25 1723 netmask 255.255.255.255
outside_access_in list extended access permit tcp any interface outside eq 1723
and you have already the "inspect pptp" set up, it should be OK.
When you try to connect, it connects successfully but you cannot pass all the data, or you can't even connect? In addition, this error message do you receive?
Finally, if you do 'show access-list outside_access_in', you get any number of access on tcp/1723 line?
-
ASA 5505 VPN works great but can't access internet via the tunnel to customers
We have an ASA 5505 ASA 8.2.1 running and using IPSec for Remote access clients in the main office. Remote access is a lot of work, with full access to network resources in the main office and the only thing I can't get to work is access to internet through the tunnel. I don't want to use split tunneling. I use ASDM 6.2.1 for configuration. Any help is appreciated. I'm probably missing something simple and it looked so much, I'm probably looking at right beyond the error. Thanks in advance for your time and help! Jim
Add a statement of nat for your segment of customer on the external interface
NAT (outside) - access list
then allow traffic routing back on the same interface, it is entered in the
permit same-security-traffic intra-interface
*
*
* more than information can be found here:
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807...
On Wednesday, 27 January 2010, at 23:12, jimcanova
-
which product is right for the ssl vpn: asa 5505 cisco 1841 or
Hello
I want to install an outside link management related so that we can ssh to our cisco devices and microsoft RDP toour servers. It's my configuration (based on what I know):
Internet > DSL modem > ASA 5505 > management CONSOLES SWITCH > SWITCH CISCO or Windwos Server
or
Internet > 1841 with DSL HWIC > management CONSOLES SWITCH > SWITCH CISCO or Windwos Server
My questions are:
Should I go for ASA or 1841 router?
What options is better? and ASA will do the job?
Are there any technical support prior to purchase of products in Australia? I need technical advice on the choice of the right products, not justs eiling me products.
Hello
Its strongly suggested to go with ASA 5505 in the first place, it is supposed to feature for the main functionality of ssl vpn server from 1841 which has this feature to be a vpn server.
ASDM also gives you the freedom to config box on your own based on your condition.
regds
-
Ikev1 ASA 5505 VPN connection error
Hello
I had previously defined our VPN using IPsec on our ASA 5505 via the ASDM. It was workign fine until an outtage power loses my settings on the device. (possibly a recording of order is not pressed)
Now when I try and put in place, once again I am recieveing an error to port binding. I have configured as normal using the wizard and activate split defintion and exempt the network inside.
The isssue when you apply the settings that I get is:
"[ERROR] crypto ikev 1 activate outdoors.
IkevReceiverInit, cannot bind the port. "
When I try to connect to the VPN I then get an error "the server cannot be reached" or something similar to that...
Could someone please shed some light on what can cause this problem?
Best regards, the Paris
William.
Hello
Thanks for the information!
We will need to know why this host using UDP 4500 and if this host really needs to use this port.
What type of application is running on this host?
What is a host internal or external?
You may also block the host on the SAA on the incoming interface to avoid the use of the UDP 4500 port using a group of access (outside or inside). Don't forget that you will need a ip to allow a at the end of the ACL to avoid any problems. Another option would be to use IKEv1/IPsec over TCP
IKEv1/IPsec over TCP allows a Cisco VPN client operate in an environment in which IKEv1 or standard ESP may not work or may work only with the change of the existing firewall rules. IPsec over TCP encapsulates IPsec protocols both IKEv1 in a TCP packet as and allows a tunnel secure two firewalls and NAT and PAT devices. This feature is disabled by default.
The default port is 10000.
HostName (config) # ikev1 crypto ipsec-over-tcp
You also need to activate on the VPN client under the profile.
Change > Transport > IPSec over TCP.
I hope this helps.
Luis.
-
Problem with ASA 5505 VPN remote access
After about 1 year to have the VPN Client from Cisco connection to an ASA 5505 with no problems, all of a sudden one day it stops working. The customer is able to get a connection to the ASA and browse the local network for only about 30 seconds after the connection. After that, no access is available to the network behind the ASA. I have tried everything I can think of to try to solve the problem, but at this point, I'm just banging my head against a wall. Anyone know what could cause this?
Here is the cfg running of the ASA
----------------------------------------------------------------------------------------
: Saved
:
ASA Version 8.4 (1)
!
hostname NCHCO
enable encrypted password xxxxxxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
description of NCHCO name 192.168.2.0 City offices
name 192.168.2.80 VPN_End
name 192.168.2.70 VPN_Start
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address **. ***. 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
boot system Disk0: / asa841 - k8.bin
passive FTP mode
network of the NCHCO object
Subnet 192.168.2.0 255.255.255.0
network object obj - 192.168.1.0
subnet 192.168.1.0 255.255.255.0
network object obj - 192.168.2.64
subnet 192.168.2.64 255.255.255.224
network object obj - 0.0.0.0
subnet 0.0.0.0 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
the Web server object network
the FINX object network
Home 192.168.2.11
rdp service object
source between 1-65535 destination eq 3389 tcp service
Rdp description
outside_nat0_outbound extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0
outside_nat0_outbound extended access list permit ip object NCHCO 192.168.2.0 255.255.255.0
inside_nat0_outbound extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224
permit access list extended ip 0.0.0.0 inside_nat0_outbound 255.255.255.0 192.168.2.64 255.255.255.224
outside_1_cryptomap extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0
outside_1_cryptomap_1 extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0
LAN_Access list standard access allowed 192.168.2.0 255.255.255.0
LAN_Access list standard access allowed 0.0.0.0 255.255.255.0
NCHCO_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
outside_access_in list extended access permit tcp any object FINX eq 3389
outside_access_in_1 list extended access allowed object rdp any object FINX
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 649.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) static source NCHCO destination NCHCO static obj - 192.168.1.0 obj - 192.168.1.0
NAT (inside, all) static source any any destination static obj - 192.168.2.64 obj - 192.168.2.64
NAT (inside, all) source static obj - 0.0.0.0 0.0.0.0 - obj destination static obj - 192.168.2.64 obj - 192.168.2.64
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
the FINX object network
NAT (inside, outside) interface static service tcp 3389 3389
Access-group outside_access_in_1 in interface outside
Route outside 0.0.0.0 0.0.0.0 69.61.228.177 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
network-acl outside_nat0_outbound
WebVPN
SVC request to enable default svc
Enable http server
http 192.168.1.0 255.255.255.0 inside
http *. **. ***. 255.255.255.255 outside
http *. **. ***. 255.255.255.255 outside
http NCHCO 255.255.255.0 inside
http 96.11.251.186 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 l2tp-transform
IKEv1 crypto ipsec transform-set l2tp-transformation mode transit
Crypto ipsec transform-set vpn-transform ikev1 esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1
transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5 ikev1
transport mode encryption ipsec transform-set TRANS_ESP_3DES_MD5 ikev1
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map dyn-map 10 set pfs Group1
crypto dynamic-map dyn-map 10 set transform-set l2tp vpn-transform processing ikev1
dynamic-map encryption dyn-map 10 value reverse-road
Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1
Crypto-map dynamic outside_dyn_map 20 the value reverse-road
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 74.219.208.50
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
card crypto vpn-map 1 match address outside_1_cryptomap_1
card crypto vpn-card 1 set pfs Group1
set vpn-card crypto map peer 1 74.219.208.50
card crypto 1 set transform-set ESP-3DES-SHA ikev1 vpn-map
dynamic vpn-map 10 dyn-map ipsec isakmp crypto map
crypto isakmp identity address
Crypto ikev1 allow inside
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 15
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 35
preshared authentication
3des encryption
sha hash
Group 2
life 86400
enable client-implementation to date
Telnet 192.168.1.0 255.255.255.0 inside
Telnet NCHCO 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH NCHCO 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 192.168.2.150 - 192.168.2.225 inside
dhcpd dns 216.68.4.10 216.68.5.10 interface inside
lease interface 64000 dhcpd inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS 192.168.2.1
L2TP ipsec VPN-tunnel-Protocol ikev1
nchco.local value by default-field
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.2.1
L2TP ipsec VPN-tunnel-Protocol ikev1 ssl-clientless ssl-client
allow password-storage
enable IPSec-udp
enable dhcp Intercept 255.255.255.0
the address value VPN_Pool pools
internal NCHCO group policy
NCHCO group policy attributes
value of 192.168.2.1 DNS Server 8.8.8.8
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list NCHCO_splitTunnelAcl_1
value by default-field NCHCO.local
admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username
username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg
username NCHvpn99 password dhn. JzttvRmMbHsP encrypted
attributes global-tunnel-group DefaultRAGroup
address (inside) VPN_Pool pool
address pool VPN_Pool
authentication-server-group (inside) LOCAL
authentication-server-group (outside LOCAL)
LOCAL authority-server-group
authorization-server-group (inside) LOCAL
authorization-server-group (outside LOCAL)
Group Policy - by default-DefaultRAGroup
band-Kingdom
band-band
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
NOCHECK Peer-id-validate
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
tunnel-group DefaultWEBVPNGroup ppp-attributes
PAP Authentication
ms-chap-v2 authentication
tunnel-group 74.219.208.50 type ipsec-l2l
IPSec-attributes tunnel-group 74.219.208.50
IKEv1 pre-shared-key *.
type tunnel-group NCHCO remote access
attributes global-tunnel-group NCHCO
address pool VPN_Pool
Group Policy - by default-NCHCO
IPSec-attributes tunnel-group NCHCO
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:a2110206e1af06974c858fb40c6de2fc
: end
ASDM image disk0: / asdm - 649.bin
ASDM VPN_Start 255.255.255.255 inside location
ASDM VPN_End 255.255.255.255 inside location
don't allow no asdm history
---------------------------------------------------------------------------------------------------------------
And here are the logs of the Cisco VPN Client when sailing, then is unable to browse the network behind the ASA:
---------------------------------------------------------------------------------------------------------------
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.1.7601 Service Pack 1
Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\
1 09:44:55.677 01/10/13 Sev = Info/6 CERT / 0 x 63600026
Try to find a certificate using hash Serial.
2 09:44:55.677 01/10/13 Sev = Info/6 CERT / 0 x 63600027
Found a certificate using hash Serial.
3 09:44:55.693 01/10/13 Sev = Info/6 GUI/0x63B00011
RELOADED successfully certificates in all certificate stores.
4 09:45:02.802 10/01/13 Sev = Info/4 CM / 0 x 63100002
Start the login process
5 09:45:02.802 01/10/13 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
6 09:45:02.802 01/10/13 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "*." **. ***. *** »
7 09:45:02.802 10/01/13 Sev = Info/6 IKE/0x6300003B
Try to establish a connection with *. **. ***. ***.
8 09:45:02.818 10/01/13 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
9 09:45:02.865 10/01/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***
10 09:45:02.896 10/01/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
11 09:45:02.896 10/01/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
12 09:45:02.896 10/01/13 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
13 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
14 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
15 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
16 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
17 09:45:02.927 01/10/13 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
18 09:45:02.927 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***
19 09:45:02.927 01/10/13 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xDD3B, Remote Port = 0x01F4
20 09:45:02.927 01/10/13 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is NOT behind a NAT device
21 09:45:02.927 01/10/13 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
22 09:45:02.943 10/01/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
23 09:45:02.943 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
24 09:45:02.943 01/10/13 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
25 09:45:03.037 01/10/13 Sev = Info/6 GUI/0x63B00012
Attributes of the authentication request is 6: 00.
26 09:45:03.037 01/10/13 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
27 09:45:03.037 10/01/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
28 09:45:03.037 10/01/13 Sev = Info/4 IPSEC / 0 x 63700008
IPSec driver started successfully
29 09:45:03.037 01/10/13 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
30 09:45:03.083 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
31 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
32 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
33 09:45:03.083 01/10/13 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
34 09:45:03.083 01/10/13 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
35 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
36 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
37 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="" **.**.***.***="" isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
38 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70
39 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0
40 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1
41 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8
42 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001
43 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001
44 09:45:03.146 10/01/13 Sev = Info/5 IKE/0x6300000F
SPLIT_NET #1
= 192.168.2.0 subnet
mask = 255.255.255.0
Protocol = 0
SRC port = 0
port dest = 0
45 09:45:03.146 10/01/13 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO.local
46 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_UDP_NAT_PORT, value = 0 x 00002710
47 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
48 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = 8.4 (1) Cisco systems, Inc. ASA5505 Version built by manufacturers on Tuesday, January 31, 11 02:11
49 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
50 09:45:03.146 01/10/13 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
51 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0
52 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***
53 09:45:03.177 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
54 09:45:03.177 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
55 09:45:03.177 01/10/13 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
56 09:45:03.177 01/10/13 Sev = Info/5 IKE / 0 x 63000047
This SA was already alive for 1 second, expiration of adjustment to 86399 seconds now
57 09:45:03.193 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
58 09:45:03.193 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" qm="" *(hash,="" sa,="" non,="" id,="" id,="" notify:status_resp_lifetime)="" from="">
59 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify is set to 28800 seconds
60 09:45:03.193 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK QM * (HASH) to *. **. ***. ***
61 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000059
IPsec Security Association of loading (MsgID = SPI OUTBOUND SPI INCOMING = 0x3EBEBFC5 0xAAAF4C1C = 967A3C93)
62 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000025
OUTGOING ESP SPI support: 0xAAAF4C1C
63 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000026
Charges INBOUND ESP SPI: 0x3EBEBFC5
64 09:45:03.193 01/10/13 Sev = Info/5 CVPND / 0 x 63400013
Destination mask subnet Gateway Interface metric
0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261
96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261
96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261
96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306
127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306
127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261
192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261
192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261
224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306
224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261
224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261
255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261
255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261
65 09:45:03.521 01/10/13 Sev = Info/6 CVPND / 0 x 63400001
Launch VAInst64 for controlling IPSec virtual card
66 09:45:03.896 01/10/13 Sev = Info/4 CM / 0 x 63100034
The virtual card has been activated:
IP=192.168.2.70/255.255.255.0
DNS = 192.168.2.1, 8.8.8.8
WINS = 0.0.0.0 0.0.0.0
Domain = NCHCO.local
Split = DNS names
67 09:45:03.912 01/10/13 Sev = Info/5 CVPND / 0 x 63400013
Destination mask subnet Gateway Interface metric
0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261
96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261
96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261
96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306
127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306
127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261
192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261
192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261
224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306
224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261
224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261
224.0.0.0 240.0.0.0 0.0.0.0 0.0.0.0 261
255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261
255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261
255.255.255.255 255.255.255.255 0.0.0.0 0.0.0.0 261
68 09:45:07.912 01/10/13 Sev = Info/4 CM / 0 x 63100038
Were saved successfully road to file changes.
69 09:45:07.912 01/10/13 Sev = Info/5 CVPND / 0 x 63400013
Destination mask subnet Gateway Interface metric
0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261
**. **. ***. 255.255.255.255 96.11.251.1 96.11.251.149 100
96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261
96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261
96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306
127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306
127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261
192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261
192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261
192.168.2.0 255.255.255.0 192.168.2.70 192.168.2.70 261
192.168.2.0 255.255.255.0 192.168.2.1 192.168.2.70 100
192.168.2.70 255.255.255.255 192.168.2.70 192.168.2.70 261
192.168.2.255 255.255.255.255 192.168.2.70 192.168.2.70 261
224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306
224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261
224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261
224.0.0.0 240.0.0.0 192.168.2.70 192.168.2.70 261
255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306
255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261
255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261
255.255.255.255 255.255.255.255 192.168.2.70 192.168.2.70 261
70 09:45:07.912 01/10/13 Sev = Info/6 CM / 0 x 63100036
The routing table has been updated for the virtual card
71 09:45:07.912 01/10/13 Sev = Info/4 CM/0x6310001A
A secure connection established
72 09:45:07.943 01/10/13 Sev = Info/4 CM/0x6310003B
Look at address added to 96.11.251.149. Current host name: psaserver, current address (s): 192.168.2.70, 96.11.251.149, 192.168.1.3.
73 09:45:07.943 01/10/13 Sev = Info/4 CM/0x6310003B
Look at address added to 192.168.2.70. Current host name: psaserver, current address (s): 192.168.2.70, 96.11.251.149, 192.168.1.3.
74 09:45:07.943 01/10/13 Sev = Info/5 CM / 0 x 63100001
Did not find the smart card to watch for removal
75 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
76 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700010
Creates a new key structure
77 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370000F
Adding key with SPI = 0x1c4cafaa in the list of keys
78 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700010
Creates a new key structure
79 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370000F
Adding key with SPI = 0xc5bfbe3e in the list of keys
80 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370002F
Assigned WILL interface private addr 192.168.2.70
81 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700037
Configure the public interface: 96.11.251.149. SG: **.**.***.***
82 09:45:07.943 10/01/13 Sev = Info/6 CM / 0 x 63100046
Define indicator tunnel set up in the registry to 1.
83 09:45:13.459 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***
84 09:45:13.459 01/10/13 Sev = Info/6 IKE/0x6300003D
Upon request of the DPD to *. **. ***. , our seq # = 107205276
85 09:45:13.474 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
86 09:45:13.474 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">
87 09:45:13.474 01/10/13 Sev = Info/5 IKE / 0 x 63000040
Receipt of DPO ACK to *. **. ***. seq # receipt = 107205276, seq # expected is 107205276
88 09:45:15.959 01/10/13 Sev = Info/4 IPSEC / 0 x 63700019
Activate key dating SPI = 0x1c4cafaa key with SPI = 0xc5bfbe3e
89 09:46:00.947 10/01/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***
90 09:46:00.947 01/10/13 Sev = Info/6 IKE/0x6300003D
Upon request of the DPD to *. **. ***. , our seq # = 107205277
91 09:46:01.529 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
92 09:46:01.529 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">
93 09:46:01.529 01/10/13 Sev = Info/5 IKE / 0 x 63000040
Receipt of DPO ACK to *. **. ***. seq # receipt = 107205277, seq # expected is 107205277
94 09:46:11.952 01/10/13 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***
95 09:46:11.952 01/10/13 Sev = Info/6 IKE/0x6300003D
Upon request of the DPD to *. **. ***. , our seq # = 107205278
96 09:46:11.979 01/10/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
97 09:46:11.979 01/10/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">
98 09:46:11.979 01/10/13 Sev = Info/5 IKE / 0 x 63000040
Receipt of DPO ACK to *. **. ***. seq # receipt = 107205278, seq # expected is 107205278
---------------------------------------------------------------------------------------------------------------
Any help would be appreciated, thanks!
try to refuse the ACL (access-list AnyConnect_Client_Local_Print extended deny ip any one) at the end of the ACL.
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
ASA 5505 VPN Site to site with several networks
Hello
I have a Cisco ASA 5505 configuration problem and hope you can help me.
Our company created a second facility, which must be connected using VPN to our headquarters.
I used the ASDM "Wizard of Site to site VPN" to create a connection, which works very well with our main network.
Following structure:
Headquarters:
Cisco ASA 5505, firmware 9.1, ASDM version 7.1
Outside: Fixed IP
Inside: IP address of the interface is 192.168.0.1/24 (data network)
Now I have a second network 192.168.1.0/24 (VoIP network), PBX address is 192.168.1.10.
The two networks should be accessible through the VPN.
New installation:
Cisco ASA 5505, firmware 9.1, ASDM version 7.1
Outside: Fixed IP
Inside: IP address of the interface is 192.168.2.1/24
I have already created a connection until a PC of the new plant reaches the data network. For example, a ping from 192.168.2.100 to 192.168.0.100 is possible.
Now, I want to add some VoIP phones to the new facility, which can reach the PBX on 192.168.1.10.
In the link, I have already added the two networks as remote network:
object-group network Testgroup network-object 192.168.0.0 255.255.255.0 network-object 192.168.1.0 255.255.255.0 access-list outside_cryptomap extended permit ip object-group Testgroup object Remote-Network
My problem now is, I don't know what to define as 'Bridge' on my PBX.
I can't use 192.168.0.1 because it's a different subnet. Also, I can not put a second IP 192.168.1.1 to the interface of the ASA.
You have any ideas, how can I accomplish this, so that the two subnets are accessed through the VPN and all devices have a defined gateway?
Could a "Easy VPN Remote" in "Network Mode" you help me?
What is the difference between 'Site-to-site' and 'extended network '?
Kind regards
Daniel condition, look for the solution GmbH
You can optionally configure a new LAN VIRTUAL (VLAN PBX) on the SAA and connect this interface to the voice network.
If you do not have a spare on the ASA port, then Yes, you have a router to route traffic from the PBX to the ASA via the data network.
-
Problem with remote access VPN on ASA 5505
I currently have a problem of an ASA 5505 configuration to connect via VPN remote access by using the Cisco VPN Client 5.0.07.0440 under Windows 8 Pro x 64. The VPN client will prompt you for the user name and password during the connection process, but fails soon after.
The VPN client connects is as follows:
---------------------------------------------------------------------------------------------------------------------------------------
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 6.2.9200
2 15:09:21.240 11/12/12 Sev = Info/4 CM / 0 x 63100002
Start the login process
3 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
4 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "*." **. ***. *** »
5 15:09:21.287 11/12/12 Sev = Info/6 IKE/0x6300003B
Try to establish a connection with *. **. ***. ***.
6 15:09:21.287 11/12/12 Sev = Info/4 IKE / 0 x 63000001
From IKE Phase 1 negotiation
7 15:09:21.303 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***
8 15:09:21.365 11/12/12 Sev = Info/6 GUI/0x63B00012
Attributes of the authentication request is 6: 00.
9 15:09:21.334 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
10 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">
11 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer is a compatible peer Cisco-Unity
12 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports XAUTH
13 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports the DPD
14 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports NAT - T
15 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001
Peer supports fragmentation IKE payloads
16 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000001
IOS Vendor ID successful construction
17 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***
18 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000055
Sent a keepalive on the IPSec Security Association
19 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000083
IKE port in use - Local Port = 0xFBCE, Remote Port = 0 x 1194
20 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000072
Automatic NAT detection status:
Remote endpoint is NOT behind a NAT device
This effect is behind a NAT device
21 15:09:21.334 11/12/12 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
22 15:09:21.365 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
23 15:09:21.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
24 15:09:21.365 11/12/12 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
25 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700008
IPSec driver started successfully
26 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
27 15:09:27.319 11/12/12 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
28 15:09:27.319 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
29 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
30 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
31 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
32 15:09:27.365 11/12/12 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
33 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
34 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***
35 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
36 15:09:27.397 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">
37 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70
38 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0
39 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1
40 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8
41 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001
42 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO
43 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000
44 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (5) built by manufacturers on Saturday, May 20, 11 16:00
45 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001
46 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194
47 15:09:27.397 11/12/12 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
48 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0
49 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***
50 15:09:27.444 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
51 15:09:27.444 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">
52 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000045
Answering MACHINE-LIFE notify has value of 86400 seconds
53 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000047
This SA was already alive for 6 seconds, setting expiration 86394 seconds now
54 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
55 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
56 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK INFO *(HASH, DEL) to *. **. ***. ***
57 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000049
IPsec security association negotiation made scrapped, MsgID = CE99A8A8
58 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
59 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = *. **. ***. ***
60 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000058
Received an ISAKMP for a SA message no assets, I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924
61 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">
62 15:09:27.490 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
63 15:09:30.475 11/12/12 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED
64 15:09:30.475 11/12/12 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
65 15:09:30.475 11/12/12 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
66 15:09:30.475 11/12/12 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
67 15:09:30.475 11/12/12 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
68 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
69 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
70 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
71 15:09:30.475 11/12/12 Sev = Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
---------------------------------------------------------------------------------------------------------------------------------------
The running configuration is the following (there is a VPN site-to-site set up as well at an another ASA 5505, but that works perfectly):
: Saved
:
ASA Version 8.2 (5)
!
hostname NCHCO
Select hTjwXz/V8EuTw9p9 of encrypted password
hTjwXz/V8EuTw9p9 of encrypted passwd
names of
description of NCHCO name 192.168.2.0 City offices
name 192.168.2.80 VPN_End
name 192.168.2.70 VPN_Start
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address **. ***. 255.255.255.248
!
boot system Disk0: / asa825 - k8.bin
passive FTP mode
access extensive list ip NCHCO 255.255.255.0 outside_nat0_outbound allow 192.168.1.0 255.255.255.0
access extensive list ip NCHCO 255.255.255.0 inside_nat0_outbound allow 192.168.1.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224
access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap allow 192.168.1.0 255.255.255.0
access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap_1 allow 192.168.1.0 255.255.255.0
Standard access list LAN_Access allow NCHCO 255.255.255.0
LAN_Access list standard access allowed 0.0.0.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 0-list of access outside_nat0_outbound
Route outside 0.0.0.0 0.0.0.0 74.219.208.49 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
network-acl outside_nat0_outbound
WebVPN
SVC request to enable default svc
Enable http server
http 192.168.1.0 255.255.255.0 inside
http *. **. ***. 255.255.255.255 outside
http 74.218.158.238 255.255.255.255 outside
http NCHCO 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac l2tp-transform
Crypto ipsec transform-set l2tp-transformation mode transit
Crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map dyn-map 10 set pfs Group1
crypto dynamic-map dyn-map transform 10-set, vpn l2tp-transformation-transformation
dynamic-map encryption dyn-map 10 value reverse-road
Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 74.219.208.50
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
card crypto vpn-map 1 match address outside_1_cryptomap_1
card crypto vpn-card 1 set pfs Group1
set vpn-card crypto map peer 1 74.219.208.50
card crypto vpn-card 1 set of transformation-ESP-3DES-SHA
dynamic vpn-map 10 dyn-map ipsec isakmp crypto map
crypto isakmp identity address
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 15
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 35
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP ipsec-over-tcp port 10000
enable client-implementation to date
Telnet 192.168.1.0 255.255.255.0 inside
Telnet NCHCO 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH NCHCO 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 192.168.2.150 - 192.168.2.225 inside
dhcpd dns 216.68.4.10 216.68.5.10 interface inside
lease interface 64000 dhcpd inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec l2tp ipsec
nchco.local value by default-field
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.2.1
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
allow password-storage
enable IPSec-udp
enable dhcp Intercept 255.255.255.0
the address value VPN_Pool pools
internal NCHVPN group policy
NCHVPN group policy attributes
value of 192.168.2.1 DNS Server 8.8.8.8
Protocol-tunnel-VPN IPSec l2tp ipsec
value by default-field NCHCO
admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username
username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg
username, encrypted NCHvpn99 QhZZtJfwbnowceB7 password
attributes global-tunnel-group DefaultRAGroup
address (inside) VPN_Pool pool
address pool VPN_Pool
authentication-server-group (inside) LOCAL
authentication-server-group (outside LOCAL)
LOCAL authority-server-group
authorization-server-group (inside) LOCAL
authorization-server-group (outside LOCAL)
Group Policy - by default-DefaultRAGroup
band-Kingdom
band-band
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
NOCHECK Peer-id-validate
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
tunnel-group DefaultWEBVPNGroup ppp-attributes
PAP Authentication
ms-chap-v2 authentication
tunnel-group 74.219.208.50 type ipsec-l2l
IPSec-attributes tunnel-group 74.219.208.50
pre-shared key *.
type tunnel-group NCHVPN remote access
attributes global-tunnel-group NCHVPN
address pool VPN_Pool
Group Policy - by default-NCHVPN
IPSec-attributes tunnel-group NCHVPN
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:15852745977ff159ba808c4a4feb61fa
: end
ASDM image disk0: / asdm - 645.bin
ASDM VPN_Start 255.255.255.255 inside location
ASDM VPN_End 255.255.255.255 inside location
don't allow no asdm history
Anyone have any idea why this is happening?
Thank you!
Add, crypto dynamic-map outside_dyn_map 20 value reverse-road.
With respect,
Safwan
Maybe you are looking for
-
Hi my stop code is 51285424 I just got this labtop and really need help everyone?
-
Hi all After a bit of help if anyone knows. I have a list of addresses on the numbers and I want to use this list to generate letters that will be displayed on. How can I take this list and add at the beginning of each letter without copy and paste
-
Entry of absolute encoder PWM w / 6008
Hi, I'm quite new to the DAQ world so please be easy on me. Well basically, I have acquired a free 6008 and want to use it to track the absolute deviation of angle of a device I have. My scope involves the use of a labtab (USB only), as well as a ran
-
Internet Explorer 7 is slow and stalls.
Original title: a i e 7 speed is slow and stalls on. occasion.__two of problems with yahoo pinochle lately.once in living room 2 or any other, table does not load unless I put table on the small table. another it just happens Puter speed a problem, d
-
I can't open any links that are sent to my email. A message box opens: The operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. (who's who?) How can I fix this problem?