Output HDMI not working only not with 200 under ICS

Similar Questions

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• Output HDMI not working not not on G60 228

  problem...

  G60 laptop works very well with all the pilot news... all the updates of windows... Windows 7

  except that when I plug the hdmi for my toshiba tv... or any other tv also... the screen image will not display on the tv... Yes its all hooked up right... but what happens is that the graphics card recognizes the tv... it will show she {TOSHIBA TV} on the menu drop-down...

  When the cable is connected, you hear the sound 'Yes im connected' Windows default & when you remove the cable... the sound of "dissconnect" default is heard...

  If the pc is grateful... but still no picture at all on television... cannot identify...

  Ive tried 2 different cables & 3 different TV... all the same results...

  any help or insight on this would be highly appreciated...

  Thank you..

  Neo

  Hi @NeoMetalz

  Sorry, I missed your reply on this thread. You did almost all the troubleshooting that can be done at this stage. One last thing checks to see if your BIOS needs to be updated or a note. This third party link will show you how to do this. If you have an earlier version then F.54A then install this BIOS update.

  If this does not work then I would recommend to call our hotline, because they will be able to connect remotely to your computer to see what's happening.  You can reach HP Total Care at 1-800-474-6836 in North America or Start here outside of North America.

• Output HDMI not working do not after Windows 8.1 update

  I use an envy TouchSmart 15 and I just launched an update of Windows based on the automatic system update 8.1 (he ran 5 updates).

  Before the update, I've used a 27 "monitor in the main screen, and it was connected via the HDMI port.  Just after the update, the system does not recognize the HDMI port and more and this goes back to the use of the screen of the cell phone Envy as the main screen.  I changed the HDMI cable but it made no difference.  I am connected subsequently another laptop to the monitor 27 "via HDMI and it worked fine.  So it appears the monitor and the HDMI cable are fine.

  Please can you help me?

  Hey yawbus,

  I would firstly you welcome on the HP Forums!

  Thanks for sharing the troubleshooting steps that you already have, and I say you are right that the issue is not with the HDMI cable or the 27 "monitor. From what you described in your post, it sounds as if he is with the drivers, maybe a conflict.

  I would like to begin with the installation of the original video drivers supplied with your laptop. I've included the document "using Recovery Manager to restore the software and drivers (Windows 8)". Please follow the steps to reinstall everything video original drivers. After you have installed the original drivers, restart your computer.

  Now, once the computer is restarted, you will need to install the updates that are available for HP and Windows. You can install both of them through the HP Support Assistant. I've included the document 'using HP Support Assistant (Windows 8)'. Scroll to the bottom of the page on to Midway, and you should see an option for the updates and the updates. Please follow the options for HP and Windows updates.

  If you are still having the same problem after the above troubleshooting steps, please let me know the model number full of your envy TouchSmart 15. I've included the document 'Guide to finding your product number'. So, please confirm the current version of Windows that you are running. If you need help to find the version, I've included the document 'operating system Windows that I am running?'.

  Looking forward to your reply!

• Not appearing debug output is not with cfmodule

  Hi, I have a problem here I just can't solve. I have a unique model that contains the code in my header and footer called globalheader.cfm which gives the floor to cfmodule (see the code example below). Everything works, the only problem is that the debug output appear not. Debugging is enabled correctly and presents itself if I remove the tag to cfmodule call globalheader.cfm. Any help would be greatly appreciated.

  Thank you! It wasn't the answer, but it lead me to it!

  The culprit was the cfcontent tag. I used it to remove the white space. I didn't know it would affect the output of debug too. I commented and now I see Debugging.

• Alienware M17x R4 HDMI-IN works only on Windows 8.1

  Hi, I have a R4 M17x and tried to use my Xbox 360 with HDMI-IN but it works only for a second then goes black but the sound still works.

  I Googled it and the only thing I could find is that apparently it doesn't properly earn 8.1?

  Any other R4 M17x owners had this problem and I hope know a fix?

  Data sheet:

  I7-3720

  GTX 675M

  3D 120 Hz display

  For anyone else having the same problem, I tried the 352.86 driver and managed to do work for most, what you are to put the lid nothing when closed and switch to HDMI-IN, it shows for 1 second then goes black, then close and open the lid and it will appear and work. :-)

• Output HDMI not working not not on my Satellite L500

  The HDMI output on my Satellite L500 seems to have stopped working in the past months.
  I tried different cables, but it still does not.

  Any ideas?

  When you press the FN + F5 key combination while the laptop is not connected with an HDMI cable, you will see an option (LCD) only. When you connect a HDMI cable you will see additional options like LCD, LCD + HDMI HDMI and so on?

  Also, make sure that the correct port HDMI on your TV is turned on.

  By the way: what operating system do you use?

• Satellite Pro L650 - 1 CG-output HDMI not working not

  Laptop: Toshiba Satellite Pro L650 - 1 CG, Intel i3 - 350 M, ATI 5650, 4 GB RAM, 320 HARD drive

  When I connect my laptop to my HD Toshiba TV and select 'Connect to a projector', all I get on the TV is a black screen.
  Catalyst Control Center can 'see' the TV and I can adjust the options of resolution for both screens, but no matter what options I try, I can't the TV to show a picture / sound.

  The TV is obviously detected SOMETHING, because it goes from a blue screen to black. Device Manager, I can see the HDMI Codec but even though he says he is activated, I can't put it as default. It says below that it's 'unplugged', and when I run the HDMI control program, it says "To use the HDMI control, you must activate it".

  I have all the latest ATI drivers / sound, as well as virtually all the drivers up to date there. In addition, there is nothing wrong with the cable or my TV, my PS3 is using the same connection.

  Hi were reluctant,

  Normally, you can switch between monitors or switch to an external monitor only when you press the FN + F5 key combination.

  In addition, I would recommend turning on the external monitor first, then switch on the laptop. You can also choose the right channel to HDMI in on your TV. Then, press FN + F5 to switch to your TV.

• Qosmio X 770/00 X - output HDMI stopped working

  Satellite of Qosmio X 770/00 X - HDMI problem

  My external monitor works well as office extended for more than a year now, - up to that I turned on my laptop of setting standby extended today.

  The external monitor does not wake up after I logged in my computer.

  HP x 2301 external monitor connected via HDMI. Laptop detects the presence of the monitor, monitor detects the presence of a HDMI connection.

  Monitor indicates 'no signal' and back to 'sleep' mode.

  Reports of laptop monitor is properly connected and that the different modes are active.

  Monitor works fine when using VGA connection between the monitor and the laptop.

  I hear material disconnect/connect "Dong" from time to time despite NOTHING being connected/disconnected.

  I have tried to unplug the monitor, plug back, setting screen resolution, exchange between extend and duplicate patterns, restart, turn off the power, changing the order of power, replacing the HDMI cable.

  I suspect a faulty HDMI port.

  Hmm, sounds like HDMI port number but I think you should try workarounds just to be 100% sure of this anomaly.

  First of all, try this.

  Turn off the laptop. Disconnect the power adapter and remove the battery.
  Press and hold the button for 30 seconds approximately. Then connect the pieces and turn the power on the unit. Now, go to BIOS (F2) and set it to default settings. Save the changes and start the machine. Now test the HDMI connection, once more.

  Where the HDMI wouldn t work, I would recommend you to retrieve the computer laptop back to factory settings. To do this, you must use the (medium) Toshiba Recovery disk or the HARD drive recovery procedure. Both procedures would format the HARD drive and therefore, you should back up your important data before performing the recovery.

  Feedback and mate good luck would be appreciated.

• Save don't work, only to save it under...

  Hello!

  I have a problem with the pdf file that I did in Adobe Acrobat X Pro. This pdf is intended for use by the public.

  When someone open pdf with Acrobat Reader DC to enter data in the fields and after that, try to save, the "Save" button is invisible and program offers only save as button. We must replace the PDF after inserting data into the fields to save, not save as.

  Does anyone have a solution to this problem?

  Best regards

  Milena

  In Acrobat Reader preferences, disable protection mode.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? Every month I pay an amount for PS and LR...

  After the upgrade to Windows 10 Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? I bought the license more than 1 year ago. Every month I pay an amount for PS and LR, and for the past 4 months I can't work. Russian support team cannot solve this problem and sent me here.

  Thank you! I reset my password, the problem was in it.