Output HDMI on my HD TV no longer works

Similar Questions

• Portege M800-105 - output HDMI for XP driver?

  Hello

  I have a question that belongs to the HDMI output.
  I put Windows XP Home on my Portege with all the driver from Toshiba support page but my HDMI output does not work.

  Now, I saw that there is a driver for Vista called output HDMI Toshiba.
  Anyone know a driver called like this for Windows XP?
  Or does anyone have the same problem with XP but the HDMI does not work?

  I hope someone can help me with this problem.

  THX

  dschumacher

  Hello

  As much as I know, that he is a driver Intel High Definition Audio HDMI.
  I m not a M800 owner but I ve got a Satellite U400 with HDMI output and installed XP.

  To be honest I didn t notice any yellow exclamation in my device manager but I installed the page Intel's Intel High Definition Audio HDMI driver
  http://www.Intel.com/support/chipsets/sb/CS-009244.htm

  Maybe this site will help you

  But note; Some features of the laptop not available in Win XP, but only under Vista!

• HDMI port no longer works on Mac Mini

  Hello

  I have a Mac Mini and I use usually 2 screens Dell. Everything worked fine until a couple of days, now the screen plugged into the HDMI port is no longer recognized. I changed monitors around and that did not help. Only the screen plugged on the stroke of lightning to the HDMI adapter works. I tried to use views to detect, but it still does not detect it. I unplugged and re plugged both monitors and restarted my computer. I don't know what else to do or if my Mac Mini is now a lost cause!

  Help, please!

  -Try resetting the SMC

  MacIntel: Reset of the controller (SMC) system management

  Then, connect a monitor to the HDMI port and see if the screen works when booting with the down Option. You should see drives bootable on the screen. This does not imply the OSX so if it works not that indicates a hardware problem

  If it works try to start normally with only this screen connected to HDMI. If this does not work then:

  Try resetting the NVRAM EXTRA memory

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• How to get my dv7 Pavilion to show the OUTPUT HDMI option in reading?

  HP Pavilion dv7 - 1157cl Entertainment Notebook PC

  FS155UA #ABA

  Windows 7 Professional

  By other suggestions:

  * Uninstalled all drivers graphics & audio drivers

  * Installed later, now have:

  Mobile Intel 4 Series Express (8.15.10.2555)

  IDT High Def Audio CODEC (6.10.6207.0)

  Intel High Definition Audio HDMI (6.10.1.2089)

  * Impossible to correctly Reinstall driver nvidia geforce 9200 m gs or AMD driver graphics high definition

  Output HDMI does not appear as an option in audio playback (pilot reports: "this device works properly.")

  Is the reason for which the graphics card driver missing?

  Which will solve this problem so that I can choose an HDMI output?

  Thank you!

  And the answer is: I had installed the latest drivers (and thanks to response above realize did not need graphics driver, although the HP site indicated as well), BUT the HDMI audio driver does not appear until I plugged in the TV, duh... I was not expecting to see the disconnected HDMI option  Once I have connected to the TV, it seemed. Subsequently, it does not show as a disconnected option.

  Lesson learned: after reinstallig, connect to the TV.

  Thanks for the help.

• Some of my F keys on my laptop no longer work. Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Original title: screen toggle main F

  Some of my F keys on my laptop no longer work. Therefore, I can't turn my screen to another monitor (IE. TV.)  Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Hello

  Have you made changes on the computer before this problem?

  Step 1: Check if you are able to use on-screen keyboard function keys and send back the same.

  Step 2: The following article can help you in the selection of the display.

  How to configure and use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/307873

• Playback devices does not recognize an output HDMI for sound!

  I have my HDMI connected with video but my output of sounds/audio/playbackdevices does not recognize that I have a connected TV, how do audio? theres no monitor to set as audio device by default!

  Normally, HDMI carries audio as well as video, so choose HDMI as the included default playback device work. If you don't see a HDMI, try:

  Click on:

  Start-> Control Panel-> Sound > tab reading .

  Now right click on an empty area and make sure that see the disabled devices and see the disconnected devices are enabled (checked). If your playback device (HDMI) appears, right-click on it and select enable. Now, right click on them again and select set as default device.

  If the above does not try to install the latest package of graphics driver that they usually contain the necessary audio drivers for output over HDMI.

  You can also check that your graphics card is capable of audio over HDMI output as some may not.

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• Lenovo N500 no output HDMI port

  I have Lenovo N500 42334 CG which provided nice output HDMI connected via a cable HDMI for TV LCD today, I tried to log in again, but unfortunately there is no video / audio on television the HDMI Lenovo, tried changing the HDMI sockets on my TV without success. BIOS reported by Lenovo diganostics is 6GET19ww (for the non-HDMI), even an inappropriated BIOS update has been installed on my Lenovo such that does not support HDMI output port more? Any other problem maybe? How to resolve? Thank you

  problem solved, apparently bios was WITHOUT HDMI, so go back to the previous bios resolved the issue. This message can be closed.

• "Tools > modules ' no longer works. I was running 16.0.2, I was later upgraded to 17.0 for some reason any.

  (This is a repost of my question. I reposted because all the formatting has been lost, and now it's a mangled mess that is difficult to read.)

  I opened "help > about Firefox" to check which version I was running.

  He said 16.0.2 and "You are currently on the channel of release update".

  Then, while I was watching that he improved to 17.0.

  1. now "tools > Add-ons" no longer works.

  2. I thought 17.0 was a beta version. If yes why it download it when I'm on the output channel?

  3. when I go to http://www.mozilla.org/en-US/firefox/fx/ and click the big green button "download free Firefox ' Download this 16.0.2 version:

  http://www.Mozilla.org/products/download.html?product=Firefox-16.0.2 & OS = Win & lang = en-US

  Yet once implying that I'm on 16.0.2, not 17,0

  Thank you!

  Zork:

  TabMix Plus is the culprit. I installed the latest TabMix Plus development build 0.4.0.4pre.120724a of their forum, and the problem is solved. Release date for version 0.4.0.4 has not been established.

  • NOTE the 'Development Channel' section at the bottom of the page Add on of TabMix Plus - The development Channel allows you to test a new experimental version of this add-on before being sent to the general public. Once you install the development version, you will continue to get the updates from this channel. To no longer receive development updates, reinstall the default version from the link above.
  • Link to the latest development version (click on the blue 'Dev-Build' in the first post to start the installation) - http://tmp.garyr.net/forum/viewtopic.php?f=3 & t = 15740

• Apple TV 4 suddenly no longer works

  Since last week my Apple TV 4 suddenly no longer works, bought 27 December 2015.

  I already have things:

  1 charge of the remote control

  2 disconnected and reconnected the power cable, hdmi and ethernet (my wifi is unstable when I'm apple tv). After re - all of these cables, the device flashes 7 times and then shortly made a break.

  3. use a different power cable.

  4 searched on the internet on the significance of the 7 blinks, found nothing. Which for me is odd, blink-sequences usually have a meaning.

  5 purchased and attached a USB C cable to my iMac will hopefully restore via iTunes. But he does not appear in iTunes (updated).

  6a tried to put it into DFU mode by connecting the apple tv with the usb cable and pushed the home (tv) button and the button play-pauzé for 6 seconds. I was informed that the unit should Flash and then iTunes should recognize it.

  7 has tried to pair the remote control again, in case there's an accident and repeated all steps.

  8 has obtained information that the cable I use is supposed to be good.

  These steps did nothing, the only thing that happened between the last time that I used it and when I realized it has no function, is that they have replaced my for a "smart" electricity meter But I can't be sure that this caused all this 100%. The appliance was not turned on for the replacement.

  I see no option to manually search for the device connected to my iMac, and no indication that iTunes gets even a hint of a connection.

  Thanks in advance.

  It has a 12 month warranty - contact Apple or take it to an Apple store and ask for a replacement/repair.

  You talk as if you have tried all reasonable measures including the verification of the cable USB is correctly (no ony supply).

• Microphone no longer works for Skype on Fedora 21 4.3

  Microphone is no longer recognized by Skype 4.3 after the latest updates for Fedora 21.

  I already had to move from i586 RPM to dynamic package to get Skype to work at all - but he ultimately everything works including mic.

  After the last update of Fedora 21, which included alsa and pulseaudio fixes, microphone no longer works in Skype. I tested several other applications that are configured to use pulseaudio like Audacity and Linphone, and the microphone works in each of them.

  Answered my own question. On one of my machines the problem proved that Skype could use my microphone only if it was the only input device activated under PulseAudio. While other applications use fortunately some audio available, Skype seems to have been confused in the face of any kind of choice. The solution is to disable all other audio inputs and speficially to configure my external USB mic as the sole entry. In addition I had to change the Audio setting integrated full-duplex stereo analog stereo output analog.

  I wasn't so lucky with my laptop, where I use the internal mic and therefore can't change Audio settings integrated (it must be defined as a Duplex for the microphone and speakers/headphones to work). For this reason, I am now unable to use Skype on my laptop. Accordingly, I am now exploring the possibility of using the SIP/XMPP voice and video with a client open source, which was too bad I was a customer/user of Skype for many years.

• Dell U2414h menu gone? Keys no longer work?

  My Dell U2414h monitor is connected to the end 2012(El Capitan) Apple Mac Mini HDMI. After 1:30, I can't go back in the Menu of the Dell printer. It seems as if the touch buttons no longer work. It seems that if the menu is somehow locked.

  The only thing dat will work is cut off from the power supply. After that work very good tactile buttons, but after a while or when I closed the Mac Mini, I can't go back in the menu. The Dell monitor is now also waiting because I cannot 'touch' the power button.

  Someone know what I did wrong or is something wrong with the Dell U2414h or is it something in the Apple Mac Mini?

  I asked the same question in the Forum and they said that it might have something to do with my Apple Mac Mini.

  During the Forum, they gave me a solution that does not work for me:

  Reset the U2414H and re - test
  * Turn on the computer and monitor off
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in 30 seconds button
  * Plug the monitor cables for the monitor and the video card of the computer. There should be only one cable video connection from the monitor to the video card
  * Turn on the monitor, then the computer

  Note, as this model was not tested/validated on the proprietary Apple hardware, ports, and the software, you must also post on the Apple Forum of Discussions and see if they can offer an overview or troubleshooting steps.

  
  

  Also does not work the solution in the manual to touch the power button for 10 seconds.

  
  

  Someone knows what's the problem?

  I think it is likely yo have a problem with the monitor. The video and does not interact with the onscreen menu/controls.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• I tried to use my photoshop cs program after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it summer more then 30 days so that program do

  I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• The keyboard and the mouse no longer works to update you Sierra

  Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

  Thank you

  The keyboard and the mouse no longer works to update you Sierra

  Hi gnardone,

  Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

  You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

  Best regards.