Overclock 6700 k in aurora r5

Similar Questions

• Aurora-R5, SLI Nvidia GTX 1080, 850w PSU enough?

  Hi guys!

  The new R5-Aurora looks great, so I'm considering buying one, but I have a question about 1080GTX SLI setting. I would buy the 5 k monitor from Dell (UP2715K) as well. So I'd better feed this beast with the installation of 1080GTX SLI! BUT, I knew the Aurora-R5 only comes with a PSU 850w (power supply unit). Is this enough? On area 51 - R2 page noted that it comes with a 1500w power supply to ensure that the SLI Nvidia GTX 1080 configuration has enough power. So how can the Aurora-R5 works correctly with only 850w?

  Useful information for configuring, I would buy:

  6700 K overclocked I7
  32 GB OF RAM
  500SSD + 2 TB
  Blu - Ray read/write
  SLI 1080GTX

  A big thank you!

  When you choose one of the processors (i7 - 6700K, i5 - 6600K) K, you will need to choose the power 850w multi-GPU approved with the high Peformance liquid of cooling that can perform one of the following OEM video cards in a dual configuration.

  

  Nvidia GeForce GTX RTYN6 1080 founders edition, Pascal, 8GB, DVI-D/DP1.4/DP1.4/DP1.4/HDMI 2. 0 b, double/single
  The founders of Nvidia GeForce GTX 1070 edition 6F651, Pascal, 8GB, DVI-D/DP1.4/DP1.4/DP1.4/HDMI 2. 0 b, double/single
  5NN03 Nvidia GeForce GTX 980 Ti, D17U-40, 6 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  YJ30F Nvidia GeForce GTX 980, 4 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI
  RW8C2 Nvidia GeForce GTX 970, 4 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  H4P1K Nvidia GeForce GTX 960, 2 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  C58PP Nvidia GeForce GTX 950, 2 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  YX6VC AMD R9 370, RD14D-P1-70, 4 GB memory GDDR5, double/single DVI-I/DVI-D/DP/HDMI

  If the user chooses the processors non - K (i7-6700, 6400-i5, i3-6100), they can always choose the multi-GPU 850w power supply and run installation dual video card.

• Upgrade of the Aurora R4 PSU.

  Forgive me if this has been asked and answered already. A R4 Aurora can be upgraded with a power supply 1500w Area 51? It fit? Can I buy from Dell? My current setup is not stable with a Titan X overclocked.  Thank you

  What would you say, we get your diet 1 work before to decide, it is not decent. According to Alienware Arena forum the Aurora PSU is decent for TitanX execution. I suspect that you did a simple mistake in your schema to connector, but correct me if I'm wrong. We will use this photo as an example:

  

  you have two pairs of cables, this photo, that you have a NATURE & a blu - ylw. It's good, when running a single card: use a two-tone cable in a port & the other cable-color in the other port. Kapisch? Often both the video cable is buried in the case somewhere & the owner doesn't know it's there or it's supposed to be used.

  A simple mistake would be if you got just the blu - wht - plugged in - and then has taken only 3 inches jumper RED & plugged. Ultimately, this means that you only use a cable. On the photo below, which I seconded Area-51 vid-cables, notice how no matter there are 4 connectors present, what we're looking at is a blu & Uncable ylw. A video card would prefer that a connector of the blu & the ylw be installed, rather than clogging in the primary & the rider. When possible, use a pair cable, instead of a cable + a rider (which, in the end, is just a cable). I have it?

  

  Aurora, each cable is on its own 12 volt rail or 12v power supply. Your Titan will be beneficial if you are connecting to as pictured, let it run out of "two tracks", or two cables... not a single cable w/a "cavalier". If this is how you have it now, fix, test. If you are already connected as pictured? Hmmmm. Let me know what your story is 1.

  Here, find a chart to help get the connectors directly on a series of nVidia/AMD products:

  • Alienware Aurora ALX, R1, R2, R3, R4, can hang or encounter errors of blue screen due to the graphics card power cable
  • http://www.Dell.com/support/article/us/en/19/SLN128872/en

• BIOS R4 Aurora missing options

  Hello

  I have a R4 with a build-date late 2013 (see datasheet below) version of the BIOS A11 running. I installed my videocard to an EVGA GTX 1070, and when I went into the BIOS, I noticed that the CPU power management Configuration page is now empty... is there literally no options at all. I'm missing all parameters that were there, including basic multipliers and other parameters of overclocking.

  Selection of the "load OC level 1" or "load OC level options 2" in the previous page had no effect on the missing parameters. I downloaded and re-flashed with the A11 BIOS update on the Dell Support site, but there has been no change.

  Main screen of the BIOS:

  

  The Advanced tab:

  

  CPU power management Configuration screen:

  

  I'm not sure what happened, or even when it happened. I can't be sure the timing of the correlates of problem BIOS to upgrade the hardware... it was a month since I was last in the BIOS. Also, at the same time, I applied a large update of Windows (the Windows 10 anniversary update) and installed a new its PCIe card. Too many changes to be able to cancel for testing purposes.

  Any ideas what's happening? I'm unable to OC my computer.

  Data sheet:

  Aurora R4, the Service tag

  BIOS version A11

  Win 10 Pro (x 64) v1607 (Build 14393)

  Core i7 - 4820K @ 3.7 GHz

  EVGA GTX 1070 FTW ACX3.0

  16 GB of RAM

  512 MB SSD / 1 TB HARD drive

  Heyo noodle,

  CASS ole was asked if I could put some info here, so here goes:

  Recently, I update my R4 Aurora as well.  A little older than you, I have an i7 3930 and it was A3 BIOS about it.  I've updated my BIOS before installing my Radeon R9 380 4gig and 16gig new RAM card.  I had Flash the BIOS A05 first then A11 BIOS on the Dell site.  I installed the A11 version about a month ago.  I checked my BIOS and I have the same options that Cass ole, looks like.

  http://i655.Photobucket.com/albums/uu272/Chuckrock2004/dellscreen.jpg

  I also have the same version of Windows 10.

  Chuck

  I don't have an its PCIe card.

• Aurora-R5, coolers of water compatible?

  I have an Aurora-R5 with an i5 cpu 6400 and I am looking to upgrade to a k of 6700 with a water cooler and I just wanted to know which ones would work on the system.

  Most of the time, you can use any 120mm closed-loop water-cooling unit available on the market. Corsair Hxxx units are very popular and a few members on the forums have installed H60 and H80 units. Personally, I've upgraded to a H75 without any problem.

  Few things to keep in mind...

  Fans: All the Aurora R5 system Fans are PWM fans. These are easily identifiable because they use 4 pins instead of 3. PWM fans can be controlled RPM much more precisely than the fans 'normal '. If you want to keep the quiet characteristics of this system, it is recommended to use PWM fans. Cooling kits more do NOT ship with PWM fans. If, for example like me, you install a H75 with standard fans, you will notice a slight increase in fan noise. you will notice a slightly louder hum coming from the system. After you have installed the H75, I ordered a set of Corsair SP120 PWM quiet fans Edition.

  BIOS: once you install the processor K the BIOS detects it and HOPE that you are water cooled. This is because Alienware, the system is NOT delivered from the factory with a processor of K and an air cooler. If you do not upgrade to a water cooler at the same time as you upgrade to a K processor when you start the machine you will hear a noise from the CPU fan very loud because the system will push the 12v on the fan of the plant and it will turn upward, very high. It's normal. Make plans to upgrade to a water cooler at the same time, you install the 6700 K chip to avoid frustration.

• Aurora r5 stock heatsync voltage problems with evga modular 750 watt power supply

  The stock fan on the heat sink thermal condition of the R5 Aurora stock runs just as fast as it can while holding a 6700 k, you mind, at a steady temperature around 30 C idle. Previous the cpu and psu were almost silent, whereas now the fan seems to run to rpm max powered an EVGA 750 watt p2 modular power unit cpu1 slot. How can I reach the bios to lower the fan speed?

  Yet, I am not "awake" not until the Caffè Verona + mix roast French kick. I do not have the model of your computer, but your service PDF manual available for download on the R5 Dell.com support page lists the Bios options, lists the right place to connect the fan to & lists the keyboard button to push to enter the Menu of the Bios. At a time like this, I could put back the original power supply in there, confirm the fan installs, if so, replace the new power supply in, see if again deploys spazzes

  but I don't think it's the power supply

  If your bios menu has no control of the fan speed, a swap of psu se do not spin faster or slower radiator fan. If you have ordered the 6700 k to the Fund, you would have power 850w. If you have installed the 6700 k yourself, using pneumatic radiator, it is possible the 95 watt cpu needs best, as the cooling liquid cooling. I see you're at 30 c idle, but it seems that the fan is bad fan... header check than 1st, see options in photo here: Alienware Aurora R5 - fan CPU 100%

  • Edit: @Hockeytown messaged me: "I eventually replaced the H80i Corsair GT for a 550LC Asetek ebay OEM pump. "This has solved my problem of fan and I am now able to connect via the (Top_fan + Pump_fan) factory setting and not errors.
  • @Hotarri installed Corsair H60

  It is possible, the motherboard as expected 'react' different when deleting in the 6700 k; It is possible that since 6700 k factory liquid cooled, the spazzes motherboard when the owner puts 6700 k themselves but without cooling liquid, such as a small problem, uses one table different fan / or a set of parameters of the fan speed (6700 k + pneumatic radiator = incompatibility) that hopefully you can change in the Bios somehow somewhere but maybe not

  It is possible that you can hand-place 3rd fan header 'pump', trying to fool the mother board, lol, see if the cpu fan slows down as a test. Still, I do not have this model, I think that the motherboard that waits for a signal fan/tachometer on the header of the pump in response to 6700 k, good luck with it

  post a photo of your swap 750 for us when you get it figured out (=

• Aurora R5 - failure of the OC - Ubuntu

  Hello

  My problem seems that so similar to http://en.community.dell.com/owners-club/alienware/f/3746/t/19987400. My setup

  • I7 - 6700 k
  • FE GTX 1080
  • 16 GB of ram of FURY 2400 (xmp ready)
  • 850PSU (liquid cooled)

  I'm not using windows install HDD, I installed SSD and Ubuntu 16.04.1. But when I restart the computer, whenever I get this message in the bios: ( http://imgur.com/a/wVFRJ )

  "The parameters of OC has been reset to the default value.

  First time, I got the BIOS OC failure message but couldn't do screenshot. Is it possible that Ubuntu is causing this error or failure? If this is the case, it must not? Any suggestions?

  PS: I also added the menu of the bios for the configuration of the overclock. ( http://imgur.com/a/wVFRJ )

  Not sure if this helps bro but my phone that I said I contacted technical support and they told me, it's a BIOS problem and there is a BIOS update "in the next few weeks."

  Currently ship all R5 with BIOS 1.0.4 which appears to be a lot of problems of OC, basically R5 of all shipped with a * BIOS.

  If the BIOS update does not happen in my time back I'll just at the end of the refund of my R5 as its faulty and we paid for OC factory at least. Also, according to Mr. Fox, the i7 6700 k should be easily able to run 4.5 ghz on all hearts, so we even liquid cooling it should be no problem at all.

  Good luck to you!

• X 51 R3 - i7 - 6700 is possible to OC the CPU higher to 3.4 without cooling system water?

  I have the X 51 R3 with a CPU i7-6700, but not water cooled version.

  After loading in the bios, I don't see any option to overclock the CPU in the OC section or any other menus besides.

  Is this possible with the systems cooled by water not? If so, how can I do this?

  Hello!  Unless your CPU is a variant of K, you cannot overclock because it is locked by Intel.

• Aurora-R4 upgrade issues & troubleshooting

  Hello, Alien Techies!... I come to you, here, now, humiliated and who have need of the councils for the control box... Let me start by listing my "original specs' followed by 'changes' everything / ALL next to or after (directly below), because I think it may be relevant to my points and questions.  Please note that I started at the time of the purchase with a modified version and upgrade to my request, and they DO NOT take into account the standard.

  MATERIAL - Alienware Aurora-R4 (X 79 with chassis ALX); 3rd gen - Intel Quad Core i7-3820 3,60 GHz CPU (* overclocked @ 4.1 GHz, Quad Core, 10 MB Cache), Seagate 3TO HHD 7200 RPM, 16 GB of RAM (excluding max. 32 GB) - 16 GB Dual Quad Channel (4x4Go) * overclocked DDR3 @ 1600 MHz, nVidia / GeForce GTX 660 @ 1.5 GB - nVidia SLI - AMD Crossfire (power connectors: 2 6 2 8 pin pins / power Bus Port) (: 2 PCI X 16 slots / dual video card supports 300 watts per card & single card 600 Watt), Creative Sound Blaster PCIe-X-Fi, integrated Real Tek ALC892 Codex 2 burner (DVD Blu - Ray &), media card reader 19-in-1, Real Tek Integrated10/100/1000 GB wireless network card MS3871 Bluetooth Wireless Combo WLAN802.11b/g/n, Power Supply is 875 Watt Muliti-GPU power supply approved and Micro-ATX card mother 07JNH0.  SOFTWARE - BIOS A06, Windows 7 Home Premium.

  MISE_A_NIVEAU / REPLACEMENTS - 1.) SSHD 4TB 5900 RPM w / 64 MB of Cache Memory & 8 GB NAND Flash, 2) Windows 10 home edition, 3.) BIOS A11... ONLY!  With the exception of a few small updates driver, I'm sure.
  

  My problems to surface around Thanksgiving, Christmas, he's 7 months after 3 years I had bought my Alienware.  It was a result of my first major update from Windows 7 to Windows 10.  My PC don't recognize even 10 Windows!  Instead, it / PC been force-fed Windows 10 conversion therapy through Remote Support assistance technique Microsoft.  Shortly after, in the week, was my first MOMENT BIG FREEZE, when out of nowhere, while surfing the internet entered my systems.  I could not even Ctrl + Alt + Delete for task register, fans revved up, and I couldn't do anything else the latest kind of hard reboot - disconnect the PC from socket... It would not happen again for another month or several weeks. And when my PC finally woke from its slumber of drunk and lazy, very, very slowly restarting black screen, try it is harder to take Windows or reject.  It took more time, once the main screen is running, and once he finds Windows.  My processors working OT, until finally about 15 minutes after its start in resting peacefully, the demon banished.  I could play, no problem, but when I was on a browser on the internet, and / or when I arrived 'Automatic updates of Windows' chaos, the demon returns, and the Big Freeze returned.  I know all this only in hindsight, looking back, 20-20. 

  It would increase only slowly, until the moment where 6 months that I have upgraded to Windows 10, she felt more fits, between half an hour sometimes a few hours at the end.  She's trying to restart, but seems completely Catatonic and unable to meet black screen alien find GOLD Windows and about every other day to once or twice a day.

  I replace my hard drive, after he died, and he had pretty much cloned it from the backup of the my new SSHD, listed above.  It's now my second update in less than 2 weeks, in the second week of June 2016 now.  My third update level, all now a few weeks apart, with BIOS A06 to A11.  I don't know why or how that is never presented as lacking a upgrade.  I did a lot of checking, cleaning, defraging and even added a new Trend Micro Security to protect my investment.  AND I STILL see the hiccups like those from my old hard drive.  Nobody seems to be willing or able to diagnose this problem as a problem that pre-existed before my new hybrid Solid State drive... A few days ago, I received an error message through troubleshooting with Trend Micro and do an F5 accumulated prior to departure.  * The error Code 2000 - 8314 and Violation 119539 "- something like CPU error msg thermal 100 c 100 c thermistor PC exceeds the thermal limit out of reach."  I do not know.  Is this one of my chipset, processor or fan around my motherboard?
  

  I want to apologize for this drag all this, but I believe that the devil is in the details.  So, thank you for your patience.  And I appreciate any input at all in my ongoing troubleshooting.  I spent enough money in the last two weeks.  And my own brain is pretty fried at this stage of troubleshooting by internet.

  Now, A QUICK or a possible upgrade issues that I hope might actually alleviate part of the symptoms or even problems entirely... I would like to top off my 32 GB maximum RAM with of 4x8Go.  It seems that thought that there are very specific for my Alienware sticks, and I have to stay with this margin does not overwork anything.  I also want to do it myself, as I did with my other Dell Dimension 4700 PC.  I just need directions to wait for him, because I have other fires to put again AND / OR maps specific 8 GB RAM can I work with my R4 Aurora?

  "Play hard and go home!"
  

  REMOVE ALL OverClocks (I suggest permanently if you want a stable system that lasts a long time)

  Run Diags ePSA. Repair everything falls down before continuing.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19530277

  Make sure that the machine is not overheating and SMART is good.

  Use usb.iso to try a clean install of Windows 10/64-bit (for one SSD/HDD Virgin) to rebuild from scratch. Perhaps the migration of drivers and legacy applications during the installation of the upgrade was not 100% or you have an incompatible application in Win10 or the installed driver.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19679918

  A real SSD is faster than any hybrid SSHD. I love real 240 GB SSD as boot C: and install only Windows and main applications on this subject.

  16 GB Dual Channel Quad (4x4Go) is very well - don't mess with it.

  Never used Trend-Micro-Security. On Win10/64, I use Windows Defender & firewall.

  Maybe try this:
  REMOVE ALL OverClocks
  Disconnect existing SSHD (becomes a backup).
  Install SSD 240 GB (or 100% perfect player)
  Clean-install Win10-64 to blank disc
  Mainly use Microsoft only provided drivers from Windows Update
  Install only Win10 updated applications, use Windows Defender & firewall free for now
  See how it works.

• Area 51 alx overclocking questions

  I am very inexperienced when it comes to playing with the clocks of computers.  I practically didn't know about settings, the dangers or benefits.  I checked on this post

  en.Community.Dell.com/.../19310782

  and he had a bunch of useful info, unless I have i7 990 x, which is missing from this post.  If I want to get the most out of my processor, what settings OC should I use, and should I be tweaking these settings by using the start menu?

  As I said before, I know very little when it comes to overclocking.  I can understand things, but I don't yet have a foot.  Any advice is welcome.  Thank you in advance for your help!

  OC takes place in the Bios. Guide to memory here: Memory specifications Alienware desktop PC > 990 x was not offered, Aurora & A51 are similar, so you could browse around & see what others have suggested: overclocking 980 x ><>overclocking 960 ><>920 overclocking ... a similar search might be "overclocking". The easiest way is to get into the Bios & OC select level 1, 2 or 3 * etc (* when it is available); This is the predefined values apparently integrated. Below to find a copy of a page that existed, published by the Dell Knowledge Base. 990 x is $ 300 + used, take care of yours.

• AURORA R4 DO NOT CLOSE PROPERLY.

  Hello

  So I'm having a problem with my R4 Aurora that I bought in February 2013. The problem is that my computer stays on, even after its judgment. This only happens once every 4 to 8 times after closing. I press the button stop and after windows my cpu fan stops and everything is on. The lights on the frame out the vents on top, but my cpu fan is turned on and close if I try pressing the button for the dvd player, it opens upward. The monitor shows no signal. I just stopped earlier today and he shut down windows and then beeps 2 continuous seconds and then restart. I'm 99% sure that I pressed the button turn off, but it restarted. It's never happened before. I'm frustrated and I'm worried that there could be a serious problem. My cpu is Overclocked and I'll upload a picture of the bios settings. I don't think it's the processor because I had these parameters for several months now and never had a problem. I also replaced the stock liquid cooling system with a corsair h80i it a month ago because I had the problem where the liquid accumulate in the radiator. It was working perfectly fine. Please help me.

  Thank you

  It comes to list building I did. Not sure on the food in my system, but I looked and the 875W is supposed to be that of the aurora r4 comes with. I can provide the serial number if necessary.

  

  

  PHEATON

  Hi, have you already found a solution to this problem? I recently updated my R4 for windows 10, and now it has exactly the same problem you describe.

  Yes. I understood that it was a driver causing my computer to stay even after closing. This is the driver of motionjoy I used to connect my ps3 controller to my computer. The pilot was to prevent the computer from closure even after discontinuation of the operating system. You have installed anything recently? Do you have any unknown devices in your device manager? Maybe one of your device drivers is not being updated for windows 10 and he asks this question. I would like to know how it works for you. I'll do my best to help you with this problem.

  I think I could have used BlueScreenView to determine the driver that was causing the problem. Even if I didn't get a bsod on my monitor screen, it created the dump file, that I could see with this application. I got rid of motionjoy and passed to another software/driver.

  The link for the program: http://www.nirsoft.net/utils/blue_screen_view.html

• DIY 6700 k or precision E5 E5-2623 v3?

  Thanks to offers Black Friday, I have to make a choice between building a system of Skylake 6700 k or the purchase of a Dell Precision 7810 refurb with a Xeon E5-2623 v3 Tower. The two eventually costs in the order of $2100-2300 $. I intend to equip them both with a series of 750 Intel SSD PCI (or who can I downgrade to a normal SSD, let's see it) and a low-cost SSD, plus a storage HARD drive or two (3-4 discs total more archive to NAS). I would like to add a 4 GB GeForce GTX card 960 and something like 32-64 GB of RAM at the same time as well. I'm an amateur, first CS6 tends to be what stresses my current system the most (a precision with a (X 5450 @ 3 GHz) Xeon 5400, but I also work in lightroom, photoshop, after effects and some works of music / audio). I shoot/edit AVCHD and I have no immediate plans for 4 k. I propose to CS6 CC if the performance changes warrant IT - I'm not currently feel obliged to do so, based on the characteristics that I don't do a ton of effects or work multicam. I wish to especially responsiveness when editing - I go to the final output only rarely so not a huge deal.

  I would like to hear from people about the pros and cons of either go with Skylake or Xeon system. I'm guessing that on a standalone basis the Skylake is the best choice, but I think that accuracy can be more extensible (I can add a second Xeon and more memory when prices are lowest and apps to begin to use the kernels more better), and all things being equal elsewhere more stable with ECC RAM and the accuracy test (although I admit that I added a bunch of parts not specified so It will be less balls). Oh I could choose an E5-2620 (6 core but more slow GHz). Experiences with the two would be welcome. I thought when I started planning the Xeon would lose on a shot to the base of the money, but it is that they have a relatively narrow price.

  Thanks for reading and your opinions.

  Skylake will be faster, especially when overclocked. Dell has a little advantage with the addition of a second processor, but dual xeon loses a lot of performance overhead. Adobe software has a lot of problems with multi-threading, dual xeon would take another performance hit, mostly in photoshop and lightroom. I recommend looking at a release haswell-e x 99, as the i7 - 5820 k, to fit your budget. When overclocked it will be a little close to the performance dual xeon. Skylake haswell-e 2133 mhz ddr4 memory faster than the xeon and and most of their motherboards supported memory non-spec/overclocked as 2400 mhz and faster. most z170 and x 99 motherboards also have a slot ultra m2 / x 4, so you can use a samsung 950 pro instead of intel 750. memory ecc Xeon usually runs more expensive, so the other i7 builds can help save money there.

  There are a lot of x 99 build threads here if you want to watch thru to establish ideas also.

• Reinstalling windows on a CPU overclock

  Hi guys,.

  Well, I need to reinstall windows 8.1 due to a bug in the system.

  I bought my alienware Aurora R4 with a 6 core i7-4960 X Overclock which is 4.3 ghz clock

  This is my fist time reinstalling windows on a computer that is overclock and I have no experience or understanding on overclocking. I'll lose more the clock once my windows is reinstalled? or everything will remain as it was?

  The overclock settings are set in the BIOS, so they will not change if you reinstall windows.

• I want a new Alienware Aurora ALX to have double EVGA NVIDIA GeForce GTX TITAN graphics cards in SLI config. Is this possible with the latest ALX Aurora motherboard has?

  I buy my fiance an Alienware Aurora with these stats:

  Base: Alienware Aurora ALX 875W matte black frame w / AlienFx ColourPre
  Processor: Intel Core i7-4960 X processor Extreme Edition (6 cores, 15 MB of cache, up to 4.3 GHz overclocked)
  ASETEK liquid cooling CPU
  OS: Windows 7 Ultimate SP1 64-bit
  Graphics card: Double 6GB GDDR5 NVIDIA GeForce GTX 780 SLI
  Memory: 32768 (4X8Go) MB 1600 MHz DDR3 Quad Channel
  Hard drive: 4 TB RAID 1 + 0 (4 x 2 TB SATA 6 GB/s, 7200 RPM, 32 MB of Cache)
  Optical devices: 8 X RW Blu - Ray (Blu - Ray, DVD, CD read & write) & 24 x DVD +/-RW
  Sound card: Integrated HDA 7.1 Dolby Digital capability
  Speaker system: Logitech Z506 5.1 Surround pregnant 75W Total
  Game keyboard: UK (QWERTY) Alienware TactX keyboard
  Gaming mouse: Razor Naga Molten
  Two monitors: 2 x Dell UltraSharp U2713HM 69 cm(27") LED monitor DVI, VGA, HDMI (2560 x 1440), DP black UK

  I went to very difficult to leave my boyfriend to buy this pc.  First of all, that we now live in different countries.  I live in the United States and he lives in England.  We met on a PS3 game online called DUST 514 and played a lot of pc games together as well.  It is difficult to have to steal it back, but we're getting married soon and I'll come to England.  He needs a new PC for years and was jealous of my Alienware Aurora R4. So I decided to buy one that is still better than mine since it's even greater player I am . This will also allow us to play more games together .

  Then I he wired the money and thought that everything would be ok, but you wouldn't believe the amount of screw - rises, that Dell threw on him!  They had even cancel a bunch of commands of the peoples, b/c, trying to control his spec-ed on Alienware has revealed a major screw-up affecting many clients... (Sorry, it made me delete/modify-this until his order passes through.  Dell representatives were concerned about what happened past.  I don't know if they told people that they had to cancel the real reason why orders and the possible impact on customers with currently Alienware Aurora...  I'll tell you what they have done after that his order is finally through.  Just a hint... inside your Alienware Aurora, check if you own to make sure that everything you ordered is actually there...)  He tried to do this for a week now...  I thought Dell was a little better than that... I knew they had bad grades, but really?...  In any case, it is a complete system stressed mess of it all back and on phone calls and e-mails with different people of Dell.  So I thought that, if it still manages to get the Alienware, maybe I can do even better!

  He really should have an SSD, so I'll get a. He was talking and drool on the maps of Titan, so I'll give him two EVGA NVIDIA GeForce GTX TITAN Superclocked 6 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express cards in SLI config! : http://pcpartpicker.com/part/evga-video-card-06gp42791kr

  I've never built a pc or tinkered with all hardware.  I want to make this even more impressive pc by adding an SSD.  I think I can install an SSD without any problem (I want the Samsung 849 EVO Mz-7TE1T0BW 2.5 "1 TB SSD)... Oops... I just thought of something... 4 TB SATA is actually 4 2 TB SATAs, put in place with 2 as the mirror...  I think that there are only 4 connectors for extension for SSD/HDD... Is this correct?  I have to replace one of the SATAs 2 TB with the 1 TB SSD?  What configuration I would define then the three SATAs 2 TB?  Would it be to say that he would have only 1 TB SATA? Could I set up so that it has SATA 1.5 TB (with SATAs split with half active and part of the half of the mirror for a RAID configuration)?  Furthermore, I have really no idea what RAID is or fact, just that you only half of total storage really active and the second half is as a backup in case of failure of a disk or something to avoid any data loss total... It is also the thing that I'm confused about that I don't know if it is also possible to install two graphics cards of Titan in SLI configuration on the micro ATX motherboard, I guess its Alienware Aurora will be, and still less 1 Titan.  Yes I know it is exaggeration lol, but the game is very important for us, especially since this is how we met.

  Sorry for the long post... Finally, the MAIN POINT & QUESTION:

  I have to install a different motherboard like the Asus Rampage Black Edition IV: http://pcpartpicker.com/part/asus-motherboard-rampageivblackedition in order to install two Titan GPU in SLI configuration?  If so, how this O_o...?  Also, I heard that there is a 'girl' Council that controls the Alien FX LED lighting and ventilation Active... How to connect to the new motherboard (if I need to get a new one)?  Also if I get the other motherboard (if this motherboard work with everything) this motherboard would have space for 4 x 2 TB RAID 1 + 0 and the 1 TB SSD SATAs?

  Please answer.  Thanks, ~ value

  Setsuka

  to install two Titan GPU in SLI configuration?

  Don't know why you config-ed with two years 780 in SLI if you want two Titan-SLI but this guy did:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19512935/20402844.aspx#20402844

  Personally, I'd keep just 780 - SLI, since the two configs end up being very similar to the performance. Either they're going run hot (in the game of max.).

• How to add Russian keyboard to the phone of flame with the construction of the aurora

  I have Mozilla flame phone.
  I change the stock software for:
  Boot2Gecko 2.1.0.0 - prerelease.
  Version of the platform: 34.0.
  Channel: aurora.

  But has no Russian keyboard. How to add the Russian keyboard on track.
  Thank you!

  p.s. I have tha same problem with 2.0. I build keyboard gaia repo git with included Russian keyboard app and install it. Maybe there is another way?

  The Russian keyboard should be available in these versions, if they are not, please also create a report bug with accurate information, equip and peripheral on the device. The component would be Gaia::System:Window

  In the meantime, here are the instructions on how to build with several locale if the local Russian keyboard is not available:
  https://developer.Mozilla.org/en-us/F.../building#Building_multilocale

  If you need help with this, we are happy to help you.