overlap of XY graph with xscale property

Similar Questions

• Invalid value for the cursor.xscale property

  I am creating a property node for "cursor.xscale", but when I try to write a numeric entry in it, it does not accept any value (at least all the values that I tried). An error indicating that the value is not valid. What is a valid value for this property and what exactly makes this this property (not a lot of documentation available I guess)

  the XScale property is a number from 0 to n - 1, where n is the number of scales X you have on your chart (usually 1).

  Here is an example of chart scales of X 3 and 2 cursor associated with the scale 'Time' and 'Time 2 "respectively.

  

  The reason why it is important, it is that the X values read you in the column 'X' cursor will be different depending on whether the cursor is associated with one or the other ladder, as you can see above.

  HTH.

• Is there a performance issue associated with SPARQL property path?

  Is there a performance issue associated with SPARQL property path?

  When we use paths property is our SPARQL queries, the queries never ends. I have a general problem, or do you have a problem with Jena and jena adapter version?

  We run Oracle 12 c. The Jena adapter has version 12.1.0.1.

  Thank you

  By Oyvind

  None of these requests ends. We have 300000 tuples in the model.

  SELECT subclass, superClass

  TABLE (SEM_MATCH)

  "SELECT? subclass? superclass WHERE {? rdfs:subClassOf + subclass? superclass} LIMIT 10'.

  SEM_Models ('isall1_x'),

  NULL, null, null, null,

  (= T, timeout = 100, qid = 123, STRICT_DEFAULT = F'));

  SELECT subclass, superClass

  TABLE (SEM_MATCH)

  "SELECT? subclass? superclass WHERE {graph? g {? subclass rdfs:subClassOf +? superclass}} LIMIT 10'.

  SEM_Models ('isall1_x'),

  NULL, null, null, null,

  (= T, timeout = 100, qid = 123, STRICT_DEFAULT = F'));

• the exact position of the mouse click xy graph while he plotted graph with mouse events

  Hello

  IAM using Graph xy for multi locations

  IAM traced graphic with mouse movement and events using the example attached (draw the graph with mouse events)

  but in sub vi Values.vi scale there are two constants 66 and 30 when I change my plot (I also change the scales), then the mouse position and chart position (cursor) value are not well aligned, but when I change the constants mentioned above I get the alignment perfect between the cursor and the last point in the path.

  as I went to another parcel (with scalability again) the same alignment problem resurfaced.

  I need to replace these two constants with something dynamic

  Please help

  

  concerning

  Mazhar

  solution to my problem is

• The XY graph Plot.LineWidth Property node problem

  Hello!

  I have a loop, where I repeatedly putting curves in a XY Chart. In the first iteration of the loop, after the first corner appears on the graph (I send data from the graphical indicator), I use a Plot.LineWidth Property node to align the thicker. However, in the next iteration, when the second plotted curve appears on the graph, and the property node is pulled again, the second curve remains thin. I guess what I've done wrong, that this property node defines only the first curve? How can I set the width of the line of all the curves of the XY graph on the same value? When I directly on the properties of XY graph, I can set the width of the curve, but only one by one...

  Suggestions how set the widths of the ground on a specific chart XY?

  Thank you!

  If it is a multiplot XY, you must set each plots properties by using the property activeplot (index of the new lot), then by setting the thickness.

• Aligning a zero position on a graph with several scales & Auto scale

  Hello!

  I hope it's a quick - but google searches and browse the forums nothing have mounted.

  I have a graph with two scales - a position and a speed (which can obviously differ from each other). I want to be able to do is to have the scale auto chart/scales - but for the 0 position to stay in the center of the chart. With 0 balance point to different places, this is the graph that is very difficult to understand at a quick glance.

  If you see the attached screenshot - the positions of two 0 are in different places.

  Is it possible to have the scale automatically, but for zero to stay in the center of the graph for the two scales?

  Many thanks in advance,

  Sam

  (As I know) you can't do this with auto scale.

  Disable the autoscale, and then manually set the interval to be symmetric compared to zero for each scale.

  Find the maximum of the absolute value of each table of marks.  Then put it away on + and - of this value.  (in the example below, I did a loose fit by multiplying by 1.1).  Since you have more than one scale of the axis, you need to browse to treat each of them at a time.  First of all, he must be told what balance Y you want to adjust, then, set the values.

  

  Another option would be to have align the zeros, but not that the scale is symmetrical around them.  You can do that too, it takes just a little more math.  I would like to know if that's what you want.

• bar graph with two scales of y

  Hello

  I have a graph with two scales different (one on the left side from 0 to 50, the other to the right of 0 to 1)

  Now I want to draw horizontal lines limit. I do this with the programately adjustment sliders.

  But I can only put the sliders that "belongs" to the first scale.

  Is there a solution?

  Thanks for any help

  Yves

  LV 8.6

  Hi Yves,

  You can assign each slider to a YScale. Simple right click on the cursor and choose the YScale. I think you can also do it programmatically.

• Error message: this isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server when you visit a Web site.

  Original title: an error occurred in SQL server?

  Hello, I just wanted to go to this site, but this error pops up: error SQL

  An error occurred in SQL server:

  This isn't a problem with intellectual property. Board of Directors, but rather with your SQL Server. Please contact your host and copy the above message.

  «Back to index »

  Please help me, I just moved my computer so I had to disconnect from the internet, but now he has problems.

  Is the site I tried to go to: http://www.minecraftforum.net/topic/227822-166-millenaire-npc-village-076c-duplicate-villager-fix/

  Hey Brainiac,

  1. are you encounter problems with this site?

  2. are you able to connect to this site from a different computer?

  3. were you able to connect to this website before?

  4. you remember to make changes to the computer before this problem?

  The problem seems to be, with the site that you are visiting. You can check if you can access the site from another computer.

  Hope this information is useful.

• Bug with rendering property on IE and FF

  Hello
  I have a bug with the property made on jdev 11g 11.1.1.1.0
  In a managed bean, I create a method starting with 'get' as getchPasswordRendered
  This method returns a Boolean value.

      System.out.println("getChPasswordRendered -> " + bindings.get("ChPassword").toString().length());
      if (bindings.get("ChPassword").toString().length() != 32) 
      {
        System.out.println("getChPasswordRendered -> TRUE");
        return Boolean.TRUE;
      }
      else 
      {
        System.out.println("getChPasswordRendered -> FALSE");
        return Boolean.FALSE;
      }

  I call this method in ChPassword inputText property rendered like this:
  #{managedBeanName.chPasswordRendered}
  
  It's my Structure.
  
  When I run the page:
  The first line of the display: table is selected, length = 5, the input text "ChPassword" to af: panelFormLayout is visible (getchPasswordRendered return true-> ok)
  I select the second line, length = 6, the input text is visible (getchPasswordRendered return true-> ok)
  Then I select the third row, length = 32, text entry is not visible (false return getchPasswordRendered-> ok)
  Finally, I select the second line, length = 6 and text entry is NOT visible (getchPasswordRendered return true-> bug!)
  
  Can you tell me why?
  Thanks for your help.

  Try the visible attribute instead of the rendering and see if it works.
  If Yes, it's probably only so rendered because is set to false, the component is removed from the page and you don't get back until the next full page reload.

  Timo

• Change the graph with nodes of property

  I've been struggling with this problem for a while now. I have a graph of simple waveform I want to set the horizontal scale to and then make a .png to file. The vi is attached. This vi is up to a lot more great vi. Does not work when I run the first level vi of the adjustment of the horizontal scale. The .png file I receive shows the unadjusted graph. However, if I open this vi and then run the first level vi it works - the graph shows the .png file scale properly. Also, if I just run this vi se it works correctly.

  I'm guessing there is a timing issue and the .png file is created before the scaling takes place, but I don't see how.

  Does anyone have any ideas as to why the scale does not if the vi is not open, when it is executed?

  If the front of the VI is not open, the nodes property can do nothing because they run in the UI thread.  This is consistent with the behavior you report with it works when the VI is open.

  Can you try to open the façade but putting off the screen (if the user does not see it) and then set the properties of the graph?

  Lynn

• Graph plot legend colors Signal not updated when mixed with the property node

  Hello

  We try to put the colors of the trace of a graph of Mixed Signal using a property node. Although we can change the color of the data in the field correctly, the colours of the plot in the legend do not change until some apparently unrelated operator action is performed (for example, to resize the window or by double-clicking a field name).  Waveform to XY charts don't seem to have this problem.

  Anyone know a work around?  I think I saw a similar topic on the forums earlier, but I'm sorry that I am unable to find it now

  See attached vi.

  Thank you

  -john

  I should probably have joined the last post of VI, but I have has been a thread of error between the two loops.  I also deleted the text you had so I could see the I need to press the button.

• Bug in reporter Panel updated with the property Value Chart

  Hi guys,.

  Defer to what the Panel update property is set to true and chart is updated with the help of node "Property value", data are not updated graphics. Capture of the block diagram and VI (2014) screen gasket.

  Is this a known bug, and is there any fix for it?

  

  Thank you

  Knockaert

  I have not tried running your code, but here are some possible solutions:

  1. There is a primitive to write the value of a control by index (added in ~ 2013). This is designed to be used others live too and should work like a local.
  2. You can send data using another way (like a queue, etc.).
  3. Use the Ctl Val.Set method.
  4. Do not use a chart. Use a chart and manage the buffer yourself. You can find some examples if you're looking for graph XY.

• First HP: Lack of Sections of first graph with steep slopes on HP

  I saw somewhere an old post on the Internet where a user was having difficulty to see the graph of y = x ^ 4 (x-2)(x-6) using a "Decimal point" display window and the "Evolutionary" method in the application of the function. The chart has not demonstrated the branch of the chart with the x origin of (6, 0). The response at the time was to use a different window or switch to advanced graphics application. I don't like either of these options, because much cheaper calculators have not this problem.

  With a little experimenting, I found that the calculator will be graphic curves where the absolute value of the slope (derivative) is less than about 375 * (Ymaximum - Yminimum) / (Xmaximim - Xminimum) where the minimum and maximum levels refer to the values specified in the configuration of the land. When the curve is steeper than this amount, the curve has holes and gaps until this value exceeds of approximately 1500 *(Ymaximum-Yminimum) / (Xmaximim - Xminimum). At this higher value, the curve is usually not in graphic form at all. These expressions are based on the study of graphs of the polynomial given above, y = 1 / x and y = e ^ x for different values of configuration of land.

  I realize with the option of touch screen on the first HP for the graphics window resizing, calculator, developers should be a little more sophisticated in how to get the calculator determine the graph. The current 'Adaptive' method is too risky for me to use unless I know a little on the chart. And the graphic progress is too slow. HP working on another option or is there maybe a setting on the computer I do not use its full potential?

  I've only used the calculator for a few days, but others who have used the calculator for many more are also puzzled. Thanks for any info. You can send our way.

  It is currently being considered. I can't say when / if there will be changes, however on the political basis of HP on 'future-looking '.

  However, graphical representation is one of those things that is "deceptively simple" because it seems to be pretty easy but is actually infinitely difficult. It has in fact been mathematically proven that you * don't * create an algorithm to be quite accurate for the same simple algebra. All graphics engines turn example is a very simple method that collapses quickly for something else then the case of some, it's well, a series of different behaviors for different types of problems in an attempt to account for different types of situations.

  The average general graphic has been done in the past was "moving pixel, evaluate and connect the dots." This works for simple things, but falls apart pretty quickly. Most of the calculators except the first on the market at the present time use some techniques of "smoothing" kind of hide the types of problems, this method can generate and generally work well for simple cases. While that hides things, the problem is he hiding things. :-) In more complicated cases, it actually makes things quite worse.

  In this simple case, most of the systems actually get the "right" result because they always assume that a big jump in values one line drawn to connect them. Result directly in other cases where it draws a vertical line to an asymtote that shouldn't be there. That's why things like Tan (x) go very often vertical asymtotes where there shouldn't be any. To try to avoid this, you need the code to make a special analysis in the case of start trying to filter false positives. It seems that in this case, it is bad filter and eliminate the line here.

  For another thing of pleasure, try the example simple "sin(e^x)" on all your systems. You will get some pretty crazy things and strange patterns here where there should not be any. The "speculative", the first will be closer, but only the grapher advanced with its graphics of interval it gets correct.

  So in short, yes - you put this to our attention. In long, graphic representation is in fact much more complicated then one might expect. :-)

• Bars that overlap in XY graph

  Hello

  I'm plotting bars in a XY Chart.

  If the values of X are not in ascending order, the bars are overlapping. Bars are overlapping, if X values are in ascending order.

  Is there something that bad? If some can confirm this? Is this a bug?

  With the help of LV 13.0.1f2 (32 bit)

  Concerning

  UliB

  It is the expected behavior.  The width of the bars is calculated according to the current and previous point.  So if your points are in different orders, you get different size bars, since the calculation of the width of each bar will be different.  The bars are calculated, such as the current and previous bars do not overlap, so if your X values are strictly increasing, so no overlap, but if you have some values of X that are out of use, the bars will be overlap probably.

• XY graph with string input

  Hello

  I want to do the following:

  I want to generate random numbers in a single column on my table and the second column with the date and the current time. Then I want to plot only the random number sthat have been generated with TIME to Get Date/time function. I want to put this in a picture and draw with a XY Chart rather than in a worksheet. I am stuck and would appreciate any help.

  Side note: for my purpose, I want to get the time exercise, rather than using a waveform chart and use the clock internal to this vi.

  Thank you.

  Don't use do not LV2013 here, so do not know what you have tried. But if you use Get Date time in seconds, you will find that the timestamp that is generated can be used to plot against your randomly generated number. No channels not involved - a cluster of timestamp table and the data table can be traced on a XY Chart.

  For example, the following snippet generates a random number all the 100 ms, twenty times, then trace the number against the timestamp, that each of them was created in the. Right-click on the graph XY and the display of absolute time format setting allows you to customize the display of your heart's content.

  

  Edit - impossible to believe that I didn't not the sentence as "no condition". It was an open goal!