Overlay feature?

Similar Questions

• Create a set of overlay-point line on an indicator of tank

  Is there a known method to manage this better? I have been experimenting with custom controls and analysis on their GObjects, their casting to the controls and play with the properties of some, but have not had much luck. I tried with an indicator of tank that I have configured with multiple slides (in aid of transparent fills but the traits of red level), but it seems not trivial due to program, set the value of these things, or get them to behave in a neat overlay feature, can be used for tank low/high bound set points.

  Send command Subvi reference and use the value property node.

  

• Function of monitor overlays

  Where is the monitor of overlay feature in Adobe premiere. They are talking in the video preview. However, I can't find in the program or in the manual

  It is version 7.1 which is not yet released. Stay tuned.

  You will find the function in the settings menu or wing.

  Peter Garaway

  Adobe

  Premiere Pro

• Rounded corners do not work in Folio overlay "pan & zoom".

  ******BUG******

  Concise problem statement:

  Using InDesign CS 6 V 8.0.9

  with DPS 12.3.3.20120911_m_699825

  8.0.9.23

  When you use the "pan & zoom" Folio overlay feature rounded corners do not work correctly on the sidebar content. Instead the image inside the frame "pan & zoom" spills out the rounded edge creating a bad time for those who like rounded corners and rounded corners are ignored...

  Steps to reproduce the bug:

  1 place an image on the stage, select a rectangular frame and click on the yellow box.

  2. set the rays of all the four corners together or a corner, is okay, as long as at least one of the corners are round.

  3. place oversized inside the box content, select the container with rounded corners and turn ON the overlay of Folio "pan & zoom".

  Results:

  When you test the document the corners rounded initially seems to work; However, after the activation of the function "pan & zoom" with a click/touch content charging as expected, but spills outside soft rays of four corners.

  Expected results:

  content should load IN the rays of the four corners in the same way as in the idle state, allowing users to actively "pan & zoom".

  

  Does that help?

  

• Improved version of iMovie is necessary...

  Hello guys,.

  As I am a video editor, I use Adobe first pro for editing several videos. But when I am in contact with the iPad, I found the video editing is more comfortable than the premier pro. But I found that there are a few points where modifications requiring.

  1. There must be option for several video layers.

  2. There must be the option of text editing (such as color, orientation).

  3. There should be options to add more effects of transitions and text styles

  4. If there is already in the version in iMovie, please guide me...

  I agree!!! But instead of Apple add features we desperately want... I found some other applications that I use in conjunction with iMovie.  Workarounds heavy, but does the job when I can't go to my computer.

  Here's what I've been using:

  Best camera: Filmique Pro: https://itunes.apple.com/us/app/filmic-pro/id436577167?mt=8

  Text/titles: OverVideo: https://itunes.apple.com/us/app/overvideo-text-music-video/id810713114?mt=8

  Green screen: DoInk: https://itunes.apple.com/us/app/green-screen-by-do-ink/id730091131?mt=8

  (I use this & overlay feature video iMovie to add custom logos overlays/watermark etc..)

• Grid toggle when you use vertical tools, LR 5.3

  For after the video tutorials online for LR5, pressing [CTRL] + [ALT] + O when you use the vertical tools in the part of Correction of the lens design tools will toggle the Overlay network and outside.  When the grid is displayed, the tutorials also show it would be a top/Center options toolbar that has calibration and transparency controls to customize its appearance.  This key combination doesn't seem to work for me in LR5.3.  Has it been modified, deleted, known, bug or I do something wrong?  (LR 5.3, Win 7, 32 - bit)

  I think you could talk about two different grids.

  There is the auto-grille that lights up when you access any slider in the manual lens correction tab - it is transient and not definable by the user.

  There is the magnifying glass which is consulted withi opinion collection grid > magnifying glass Overlay feature. So the key [CTRL] [ALT] [O] to work, you have to select a grid, Guides, or Image first to superimpose. Then, it works as expected. I suspect that if you turn on the grid by checking it in view > Loupe Overlay, it will work as expected.

• jerk strange movement clip directly after having chained transition

  Hi guys,.

  I was going along very well add clips to a timeline, then adding a transition 'cross dissolve"between each of them. each clip is about 3 to 6 seconds.  These video clips are added to the timeline on the top audio locked with a song about it. I use the "overlay" feature to add the clips.

  On some clips, there is a strange movement jerky at the beginning of the clip and just after the transition. the scene seems to jump to any 2-3 images.

  so, I deleted the fade ran into and reinforced through each image one by one.  No jerkiness.  then I put in the transition and it's just after the beginning of the clip during the transition.

  This does not happen on all of them, some. I tried to cut some framing away the video choppy, reducing it.  Add the transition, now choppy new part is there.

  Has anyone seen this? What is a setting? I use PPO5.5 on a Mac OS 10.6.6 / Intel 2.66gz / 8 GB of memory. a free 1 TB with 600Gig drive.

  Thanks for any input or advice!

  OPP creates the handle? If so, it is not doing things.

  The "handles" are there in the original media, all right.  The problem is the part of the clip is another blow, this is what you see in the transition.  You must shorten the time you use.  Developed at least half the length of your transition spent the beginning of the photo you want to use and end (point) at least half the length of the transition before the next shot.

  Yes, the Ripple Edit can be used to do this.  The help file will have the details.

• Feature request - overlay - Image

  It woul be nice to have the ability to place a small graphic with a transparent background on top a clip or the entire video.

  for example a logo

  Hi Michael,

  Check out the latest version of the Clip of first (2.1 for iOS, Android 1.1). We added custom features of customization, including the ability to add a watermark logo and a personalized video bumper. More on how to use them here: 's New in Premiere Clip: Add Branding custom to your videos. Creative blog Cloud by Adobe

  Let us know what you think!

  Bronwyn

  Product Manager

• Replacement of overlays folio features?

  Hi all and thanks for creating this new forum!

  Here, we welcome the new DPSolution, but also we are concerned about the loss of animation of folio overlays.

  Our customers want these animation and here we must understand how to replace!

  1. Hyperlink
  2. Slide show (we are terribly concerned on this subject)
  3. Image sequence (we are terribly concerned on this subject)
  4. Audio & video
  5. Panorama
  6. Web content

  Thanks for the support!

  Have you installed the new tools? The new Panel inlays is identical to the former Panel inlays of folio with the exception of the already obsolete panorama.

• Missing features from iMovie 10.1.1

  Hi all!

  I'm a fairly recent Mac user, up to now, I had always used Windows and I'm struggling with something related to the iMovie. I hope someone can help me with this! Let me explain:

  I have seen some tutorials on YouTube how to use iMovie and managed pretty well. But something's always bothered me, it seems that certain features of iMovie that other people use in their videos do not exist in mine. I currently use iMovie 10.1.1. (I think it was later) but I can't find some contracts to term.

  The last thing I wanted to do was put two parallel videos like the one this guy out here: https://www.youtube.com/watch?v=HusPNt8L01c however, the 'Video overlay settings' option (0:22) is not on my side. My version can not even get one on the other and I can't change that. I have upload a picture of my screen

  

  Furthermore, I tried to download again and went through the menu at the top several times to find hidden buttons which currently do not show in my computer.

  If anyone has any suggestions to make all available term, I would be very grateful!

  I thank in advance and have a nice day.

  With best wishes,

  Diego

  You must first drag and drop the clip of overlay on an item in the timeline of the project.   Select the overlay clip (it will get a yellow border) and only then you will see the picture in the image control (two rectangles that overlap):

  

  In general, to control items that are not relevant to the selected item type do not appear or are grayed out and inactive.

  I hope this helps.

  Geoff.

• I can't watch DVD: error message - create failed overlay

  When I put a dvd in I click here to read on DVD Win. A message just create up to failed overlay. Low resolution of the screen or color depth. I tried both of them, but it makes no difference. Any ideas?

  Hello

  What OS was installed on the laptop you. Are you using the W2k?
  To my knowledge that some thing like, which could occur if an external monitor is connected and extended desktop is enabled in the display properties.

  I found also some useful tips on different websites:
  Please check the following steps:

  1. make sure that the laptop hardware acceleration is set to full.
  Software DVD players require this setting; otherwise, they can take advantage of features of superposition of the video card.
  Here's how:
  -Right click anywhere on the desktop and select Properties.
  -Select the settings tab, and then click the Advanced button.
  -Select the performance tab.
  -Make sure that the hardware acceleration is set to full.

  2. make sure that DirectDraw acceleration is turned on in the DirectX utility
  -To start the DirectX, you must type the DXDIAG command in the window RUN.
  -then select the view tab.
  -in the Middle, on the left side, you will see a frame for DirectDraw acceleration. It must be enabled

  Then restart the laptop and check if it of possible to watch DVD

• How to exit a mode of overlay of the keyboard on Satellite Pro A200?

  As of recently I noticed that my keyboard shortcuts stopped working, that is, rather than the work of combination Fn + F # except Fn + F10 and Fn + F11 which access the cursor control keys and numeric keypad, respectively.
  Also, just by holding Fn I apparently temporary digital keypad mode (However, before, when everything was working, just keep the Fn done this little bar feature at the top of the screen keys appear).
  So I think that my computer is still in some 'keyboard overlay mode' and that's why only Fn + F10 and Fn + F1 combinations work and nothing else. I really need to get back the use of other combinations of keys Fn + F # if I appreciate any help anyone could give me this.
  Thank you!

  The lights are activated under the F10 and F11 keys?
  If so, turn it off by pressing the FN + F10 or FN + F11

  But first, it would be very useful to know that OS you installed or do you use?
  Are you using Vista?

  Well, in this case, you should try to reinstall the TOSHIBA components common driver, then the TOSHIBA Flash Cards. Flash cards provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  The two drivers are located in the package Toshiba added value on the European driver Toshiba page.

• Question about key features hot

  The FN key does not seem to react like a toggle switch, as it should. The result is the loss of keys on the left, but the right side of the keyboard functions fine. Sometimes when I start the FN key won't work and the keyboard and quick access keys work as it should.

  This leads me to believe that the problem described below is not a hardware problem. The F10 and F11 hotkey functions, if I switch them independently go power as do the other FN keys, that can explain the "overlays" work.

  I tried a 'system restore', a full restart with "BIOS" update and recovery software, I even hung the keyboard, all to no good. Is there some piece of software which has programmed has loaded, which upsets the hotkeys/FN?

  Hello Peter

  First of all, it will be interesting to know what model of laptop you have. I hope you don t try to use the external keyboard. ;)

  To work the key FN + Fx combination successfully it is necessary to be installed a lot of different tools and utilities. The most important is the common modules (not available on all portable models).

  What confused me is the fact that the keys FN (F1-F9) don t work correctly after the installation of recovery image. To understand you right: don't you wrote on the recovery CD or product delivered CD Utility & Tools?

  As far as I know for the feature FN keys that do not update BIOS.

• Is it possible to get the keyboard overlay alphanumeric numlock in W530?

  Hi all

  Last week, I got my new ThinkPad W530 as a replacement for my W500 which has replaced my R60 which replaced my R51. One of the first things I noticed was the changes to the keyboard. I like the feel of the keys, but I don't like the layout, I think that the previous one has been perfect :/

  Anyway, I'm not here to bash. I give you the new layout a chance, and maybe I'll get used to and do not want to come back in a few months, we'll see. But before I can do, it is something that I absolutely need. I use software that needs a numeric keypad and the new keyboard W530 doesn't seem to have the overlay of the keypad that older models had.

  Is there anyway to get this or simulating his behavior? No matter what, I don't care if it's a combination of hidden Fn who will activate him, a third to simulate software, a fan-made keyboard driver or some fiddling with options of Windows. But of course there MUST be a way, easy or difficult, be they the keyboard works as if she had the number lock and a keypad digital, right? I don't think I'm the only one who need this feature...

  I have the strange feeling that you can write your own Autohotkey script that toggles an overlay simulated with a double click of the right Ctrl key.

  EDIT: And here is:

  ~ RControl:
  
  <>"" ~ RControl "or A_TimeSincePriorHotkey > 200)"
  
  {
  
      KeyWait, RControl
  
      return
  
  }
  
  t : = ! t
  
  #If t
  
  {
  
      u::4
  
  	i::5
  
  	o::6
  
  	j::1
  
  	k::2
  
  	l::3
  
  	m::0
  
  	/::+
  
  	;::-
  
  	p: : *
  
  	0 :: /
  
  }

• Text on 16-bit image overlay

  I'm trying to text on a 16-bit image overlay.

  The overlay is successful (using overlay IMAQ Text.vi), but I would like to save this file with the overlay.

  I have been using IMAQ Write queue 2. VI to write the image as a .png and writes the image successfully, but not overlapping.

  I read this comment about overlays:

  Using overlay with a third-party Viewer features:
  When you use the functions IMAQ Overlay, a third-party Viewer will not display this information. You must use playback Image Vision of information with application software to display the overlay. To display a picture in a third-party Viewer, you can use the IMAQ merge Overlay.vi, who is a destructive function, which means that it replaces the underlying pixels by pixels bunk.

  So basically I would like to see the images later on a viewer of third parties, but when I use IMAQ merge Overlay.vi, the result is no longer the 16-bit image, I need.  It now becomes an RGB image.  Any suggestions on how to get a 16-bit image with superimposed text I can see outside LabVIEW?  Thank you.

  Hi jmeyer,.

  I think that's what you hear.  Take a look at the screenshot.  When you create a constant, or a control on the entry called Pixel color value it will create a dialog box that lets you choose a color you want to use when you click the command/consatant.  If you want to enter the actual value of the U32, you can replace this with a digital constant/control and enter the direct number you need.